Windows 64-bit error: 203: unknown error

Similar Questions

• Windows 64-bit error

  Hello

  I'm trying to run a 64-bit version of windows in the drive, but it says:

  

  I ran this tool that says that if I can run a 64-bit version and he says he can run very well without any problems.

  How can I sort this problem so I can run a virtual machine?

  Thank you

  Welcome to the community,

  did you follow the steps mentioned on the screenshot? You must enable VT - x in the BIOS of the host PC in order to run 64-bit VMs make you that you also enable the 'Execute Disable Bit', once you are in the BIOS.

  André

• attempt to copy to the windows drive is not an unknown error occurred (-54)

  When syncing my iPhone, I get the following error message near the end of the processs of 6s + 128 GB

  attempt to copy to the windows drive is not an unknown error occurred (-54)

  
  

  Someone has an idea what is the cause to happen and what I can do about it?

  Thank you

  Hello

  Here is a solution for your problem

  http://www.IMore.com/having-trouble-syncing-iTunes-after-updating-Windows-10-her're-your-fix

• Windows Update has encountered an unknown error. Code 80070026

  Windows Update has encountered an unknown error. 80070026 code that performs updates not be installed

  Although this page shows a different result code then what you see, please follow the steps on this page-
  Windows Update error 80070490

  Be sure to download the Version of (CheckSUR) system update readiness tool that matches both the edition of Windows installed and the architecture of the system.
  To see what is the architecture, open system in Control Panel.
  The architecture of the system appears under system, next to system type:

  When CheckSUR has finished download, set up the system before running the boot-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall and make sure that the native Windows Firewall is now on. The systemmust be connected to the internet when you run CheckSUR.

  Once you have restarted the clean boot state, run CheckSUR.
  Restart the boot state minimum same once it is finished and see if the system can search and detect updates necessary now.
  If possible, suggest that see you if the system can install the updates now.

  Cancel the Clean boot steps State now and restart the system once more.
  If this does not solve the problem of installation of update, then do a "upgrade on-site" aka Repair Installation, as described on the Windows Update 80070490 error page.

  Expert MowGreen Windows IT Pro - consumer safety

• I can't update of Windows security because of an unknown error. Also, I get frequent BSODS.

  Good, so like I said, when I try to get the security updates, I get a message saying "year error occurred while of updates for your computer." Errors found: Code 80072EFE Windows Update encountered an unknown error. "Code 0 x 80244015 appears when I try the update of Defender.

  I've had this laptop (it's a Toshiba Satellite L305, is told by the way) gave me down and it has a number of problems. Another problem taxing enough, it's that I had frequent dumps. Some programs that I want to uninstall used to uninstall because the uninstall file does not exist. I installed a free Revo Uninstaller Pro trial and that helped, but I still don't know what causes the dumps.

  One of my recent problems with laptop computer is my computer crash dumps whenever I try to open Chrome now. It was working fine, then I would get BSOD as I just described, so I tried to uninstall it and then put it back, and it worked well again for the day, and then it happens again. I think it could be a virus. I also learned that it might be a registry error and I can change my registry, but I know almost nothing about computers, so maybe I need to walk through this.

  I have AVG and I used it to scan the computer and I also scanned with the Defender, and both programs have only seen adware. I don't really think that could do much harm. I'm not sure. Right now, it looks like a big mess of problems.

  I think I should also add that the laptop has no trackpad software installed, or at least that's what it looks like. The former owners told me that the trackpad has never worked. I don't know if that has anything to do with it.

  Any advice will help, please leave as much as possible.

  Thank you

  Blue screens are caused by defective material or defective hardware drivers.

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution. You can also right-click and choose Details for more information. Post the details here.

  To see if any recent system change caused it

  In Control Panel (and select Classic discovered in the left pane) choose Administrative Tools and then choose reliability and performance monitor and choose the monitoring tools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date (scroll left to see earlier dates). See if your plant has started to happen after you installed or uninstalled something.

  First to test we can the material.

   

  Standard hardware troubleshooting

   

  S.M.A.R.T

  Click Start - All Programs - Accessories - Right click Command Prmodel and choose run as administrator.

   

  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)

   

  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.

   

  Run chkdsk

  In computer discs right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  sfc/scannow

  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 51 and Source disk
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  
  Look for EventID is 26212 and Source is Chkdsk
   
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted. We may be able to copy it from another computer.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

   

  Analyze dump files

   

  If you want to analyze your own dump files. (C:\windows\Minidump).

  
  Download and install the debugging tools for Windows
  http://msdn.Microsoft.com/en-us/Windows/hardware/hh852363
  Install Windows SDK, but simply choose the debugging tools.

  Create a folder called symbols in C:\

  Start Windbg. Menu - symbol file path of the file and enter

   
  SRV * C:\symbols* http://msdl.microsoft.com/download/symbols

  Close, and then reopen WinDbg. File menu - Open Crash Dump

  It will analyze the crashdump. You must close and reopen WinDbg for each analyzed dump file. Because you download symbols from the internet WinDbg seems to be to do nothing. But it's the download. Be patient.

   
  Looking for a driver or a library system that the incident occurred at the end of the list. Find the file, do a right click then Properties - Details tab. You must update the driver identified.

  Type in the theWinDbg command prompt

   
  ! analyze - v

   

  -v means Verbose and if the accident was created by a program, as opposed to hardware or a driver, it will appear in the middle of the list.

  Or download files minidump to your Public SkyDrive folder and copy the link in the address bar, and I'm going to do an analysis.

   

  SkyDrive is the download file from Microsoft, Windows Live, at https://skydrive.live.com/site.  Read about it at http://explore.live.com/skydrive.

  If you have downloaded one of the Live applications or a website based Live
  e-mail, you already have access to your Skydrive account.

  Put your list of events in the Public folder and copy the link in the address bar.

• Cannot install Service Pack 4 (KB2463320), windows update has encountered an unknown error, Code 2B 33

  Cannot install Service Pack 4 (KB2463320), windows update has encountered an unknown error, Code 2B 33

  SQL 2005?

  Download and install from here... http://www.Microsoft.com/en-US/Download/details.aspx?ID=7218

• Code 8024200 D Windows Update has encountered an unknown error. I get this message for both updates and windows failed to install.

  Code 8024200 D Windows Update has encountered an unknown error.  I get this message for both updates and windows failed to install. Can someone help me?

  Hello SammyFlo,

  Take a look at the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/getting-a-Windows-Update-error-80070490-when/1f53aa2e-238C-488C-a952-cef7c9b7cc87

  Let us know if that helps.

  Best regards

  Matthew_Ha

• How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

  How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

  Hi João,.

  To help solve the problem, remove the PC from the domain and then connect the computer to the domain.

  Click the Microsoft KB Article below for troubleshooting steps.

  The trust relationship between this workstation and the primary domain failed

  Let us know how it goes.

  Thank you

• How to solve the problem with Windows Update on Windows 7 64 bit Home Premium SP1; Module Windows install encounter error 126, impossible to run/scannow sfs or TrustedInstaller. Help, please

  Hello

  First of all, thank you in advance for any advice for any help, you can offer.

  A week ago I noticed that Windows Update had a backlog of updates (30-40) as I had it value updates but let me choose whether to install them. As I tried to install, I noticed download election for hours but no visible progress in the taskbar and only a few updates installed on restart. Try to check the updates of similar results. I tried a number of solutions suggested here as a tool for troubleshooting Windows Update, but it made that seem to clear my list of updates to uninstall and make sure Windows Update has been under the impression that I had never checked the updates, apparently a worsening of the problem like today no update appeared and I encountered error 8007000D.

  I've tried other options like Windows system update readiness tool and tried to run the sfc/scannow System File Checker, but what who would not (cannot start service repair) I grew more and more worried. On recommendation from other forums, I tried also to start TrustedInstaller in command prompt, which does not. Unfortunately, I had run a Disk Defrag and clean-up recently which had been deleted and (unbeknownst to me) my last restore point. The root of the problem seems to be the Windows Modules Installer, which does not start when you are prompted in Services (error 126), something wrong with the registry may. So reluctantly, I tried to perform a repair installation using a downloaded iso, I burned onto a DVD (insured was also Windows 7 Home Premium 64 - bit SP1). However, even if it doesn't seem to work, it is constantly check for installation updates (unless this is supposed to last several hours?) or if I opt not not to check, it pass the compatibility check and then fail in the second stage (collection of files, settings, and programs). I tried several times, once in offline mode with my disabled (Norton) antivirus and once in clean boot mode.

  I don't know what other options I have. I would like to avoid a clean as much as possible installation, because my computer (HP laptop) still seems to operate normally (for the moment) outside the impossibility to install Windows updates (via Windows Update or directly from Microsoft, it seems), but I think it would just leave vulnerable more and more over time. Has anyone else had similar problems and has found a way to solve? I'm not a computer expert so any help would be greatly appreciated.

  Hello

  Try the troubleshooting steps in this link: error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found".

  Let us know how it goes.

• Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error."

  Original title: error code 88982F04

  Received this error code when trying to install win 10.   the message was ' ' has no 1 update "and"windows update has encountered an unknown error."  I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC.  Can someone please help with an answer.

  Thank you

  Delete C:\$WINDOWS.~BT

  Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.

  

  If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you find it difficult to do some of the steps below, please see instructions how do their:

  http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  You can try to download the 64-bit version.  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• Error - installation of Oracle EBS 12.1.1 for Windows (32 bit) on XP Prof SP3

  Can anyone help?
  
  I recently downloaded suite EBS worm Oracle delivery and Installation Express train:
  Oracle EBS 12.1.1 for Windows (32-bit); Release date: 12.1.1.0.0; Part number: B54471-04 Update: 14 / JAN/2010
  
  But the installation process stopped on step 2 of 5.
  (Status bar displays 20% and)
  Command: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrun11g.cmd)
  
  Oracle quick Application installation wizard alerts:
  RW-50004: Error Code when you run the external process. Check the log file for more details.
  Install the driver of database running for instance SCREWS
  
  Log file:
  (Location: D:\oracle\VIS\db\tech_st\11.1.0\log\appsutil\VIS_unit6253\02091538.log)
  
  Treatment DriverFile = C:\Stage12\startCD\Disk1\rapidwiz\template\adridb.drv
  The instantiation of the drivers for operation C:\Stage12\startCD\Disk1\rapidwiz\template\adridb.drv
  instantiate the file:
  Source: C:\Stage12\startCD\Disk1\rapidwiz\template\adrun11g.cmd
  dest: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrun11g.cmd
  backup: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrun11g.cmd to D:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\VIS_unit6253\templbac\adrun11g1.cmd
  instantiate the file:
  Source: C:\Stage12\startCD\Disk1\rapidwiz\template\adrundb.cmd
  dest: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd
  backup: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd to D:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\VIS_unit6253\templbac\adrundb1.cmd
  Step 0-5
  
  Command: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrun11g.cmd
  Step 1 of 5
  Step 1 of 5
  Command: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd
  Step 2 of 5
  Execution: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd
  C:\Stage12\startCD\Disk1\rapidwiz > REM
  C:\Stage12\startCD\Disk1\rapidwiz > REM $Header: adrundb.cmd 120.12 marderiu noship 19/01/2009-06:29:56 $
  C:\Stage12\startCD\Disk1\rapidwiz > REM #.
  C:\Stage12\startCD\Disk1\rapidwiz > REM
  C:\Stage12\startCD\Disk1\rapidwiz > REM This file is automatically generated by the automatic configuration service. It will be read and
  C:\Stage12\startCD\Disk1\rapidwiz > REM crushed. If you have received the order to edit this file, or if you are not
  C:\Stage12\startCD\Disk1\rapidwiz > REM be able to use the settings created by the automatic configuration service, see Metalink Note
  C:\Stage12\startCD\Disk1\rapidwiz > 387859.1 REM for assistance.
  C:\Stage12\startCD\Disk1\rapidwiz > REM
  C:\Stage12\startCD\Disk1\rapidwiz > REM #.
  C:\Stage12\startCD\Disk1\rapidwiz > REM
  C:\Stage12\startCD\Disk1\rapidwiz > FOR /F "delims is" %a IN (' DATE/t') DO (set date = % a)
  C:\Stage12\startCD\Disk1\rapidwiz > (set date = 10/02/2010)
  C:\Stage12\startCD\Disk1\rapidwiz > FOR /F "delims is" %a IN (' TIME/t') DO (set time = % a)
  C:\Stage12\startCD\Disk1\rapidwiz > (set time = 11:15)
  C:\Stage12\startCD\Disk1\rapidwiz > INSTALLATION PHASE STARTED ECHO: DATABASE: 2010-02-10 11:15
  
  THE INSTALLATION PHASE BEGAN: THE DATABASE: 2010-02-10 11:15
  C:\Stage12\startCD\Disk1\rapidwiz > SET JRE_PATH=C:\Stage12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
  C:\Stage12\startCD\Disk1\rapidwiz > SET JRE_CP =. ; C:\Stage12\startCD\Disk1\rapidwiz\jlib\java; C:\Stage12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\share.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
  C:\Stage12\startCD\Disk1\rapidwiz > SET XML_FILE=\admin\VIS_unit6253.xml
  C:\Stage12\startCD\Disk1\rapidwiz > SET XML_FILE=D:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_unit6253.xml
  
  C:\Stage12\startCD\Disk1\rapidwiz > SET PATH = C:\Stage12\startCD\Disk1\rapidwiz\unzip\NT; C:\V98\VC\bin; C:\Cygwin\bin; C:\Perl\site\bin; C:\Perl\bin; C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem; C:\Program Files\Fichiers SharedCOM Shared\DLLShared\; C:\Program Files\Fichiers SharedCOM Shared\10.0\DLLShared\; C:\Program Files\Fichiers SharedCOM Shared\9.0\DLLShared\; C:\Program Files\QuickTime\QTSystem\; «C:\Program Files\Fichiers Autodesk Shared\ «;» C:\Program Files\Fichiers Files\Repro Desk; C:\Program Files\Microsoft SQL Server\80\Tools\Binn\; C:\Program Files\Microsoft SQL Server\90\DTS\Binn\; C:\Program Files\Microsoft SQL Server\90\Tools\binn\; C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\; C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\. H:\CSTPNT32; C:\MSSQL7\BINN; C:\Progra~1\DISKEE~1\DISKEE~1\;\Microsoft.NET\Framework\v1.1.4322
  
  C:\Stage12\startCD\Disk1\rapidwiz > EC SET = error code
  C:\Stage12\startCD\Disk1\rapidwiz > setlocal enableextensions
  «"C:\Stage12\startCD\Disk1\rapidwiz > set/p unpw =»
  C:\Stage12\startCD\Disk1\rapidwiz > for /F "usebackq tokens = 1, 2 delims = /" %i in ('APPS/APPS") set APPSUSER = %i & & set APPSPASS = j %
  C:\Stage12\startCD\Disk1\rapidwiz > set APPSUSER = APPS & & set APPSPASS = APPS
  C:\Stage12\startCD\Disk1\rapidwiz > IF '5' == '1' (THREADS SET = 1) ELSE (SET = 2 THREADS).
  C:\Stage12\startCD\Disk1\rapidwiz > CD /D C:\DOCUME~1\MUHAMM~1\LOCALS~1\Temp
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > path settings and classpath display REM for forest exploitation
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > echo "PATH to the - C:\Stage12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java - Setting."
  
  "Defining the path to-C:\Stage12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java-.
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > echo "CLASSPATH setting-.; C:\Stage12\startCD\Disk1\rapidwiz\jlib\java; C:\Stage12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\share.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar-".
  
  "Setting CLASSPATH-.; C:\Stage12\startCD\Disk1\rapidwiz\jlib\java; C:\Stage12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\share.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar-".
  
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM these steps occur when dbseed is not "No. Database".
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > if 'View Demo' == "No. Database" goto: NO_DB
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > segs restoration UPDATE of REM in the context
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > if 'View Demo' == 'Fresh Install' goto: FI_DB
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > set DRVNAME = gvision.drv
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > if 0 == 0 goto: UPD_RBS_VI_OK
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > goto: DONE_WITH_RBS
  
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > if 'D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd' == 'D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd' (if not '' runProcess_3' ' == 'FALSE' (goto: "runProcess_3") else (goto: runProcess_1))
  
  RW-50010: error:-script returned an error: 1
  RW-50004: Error Code when you run the external process. Check the log file for more details.
  Install the driver of database running for instance SCREWS
  
  
  Thank you.
  
  Antenor

  Hello

  The log file shows this error:

  [AutoConfig Error Report]
  The following report lists errors AutoConfig encountered during each
  phase of its execution.  Errors are grouped by directory and phase.
  The report format is:
            
        ouicli.pl               INSTE8_APPLY       -1
  
  AutoConfig is exiting with status 1
  

  Please see (Note: 989752.1 - installation 12.1.1 appears to hang it on Windows and later failed with the RW-50004 error code).

  Kind regards
  Hussein

• Windows Update sp1 vista 32-bit error code 800700d.

  I have recently created a factory reset on my compaq pc using windows update can't install sp1, I tried install the clean boot disabled antivirus without success, I used the system preparation tool kb936330. I also got the 800700d error message I've also tried using windows update and the stand allone Installer for suggestions kb936330?

  Keith,

  I only see the answer of Caste Cates from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Windows-7-update-error-codes-800700d-and-80243004/27737d55-9c10-44b5-B701-6ba147c78364

  Thank you.

• Windows Update 80070103 error

  Original title: 80070103

  "Windows update has encountered an unknown error" error Code 80070103

  Windows Update - Manager, configure and troubleshoot:

  http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3

  Get tips on troubleshooting problems with a client do not install updates. http://bit.LY/91hZVr

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Win 7 64 - bit error 1402 Setup / Remove Programs r key blocked

  I tried to install MS Office 2010 and to install HP Officejet J4580.

  I tried to remove some programs.

  Win 7 64 - bit error 1402 Setup / Remove Programs r key blocked with unknown

  Hello

  1. do you receive the same error message when you try to install HP Officejet J4580?

  2 have you made any changes to the computer before the show?

  I suggest you follow these methods and check.

  Method 1: Run the application as administrator and check.

  Refer to this link: How to apply once with a full administrator access token?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  Method 2: try to install using this printing software tool HP Officejet J4580.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Regarding the installation of MS Office 2010, you can visit this link and check if it helps. You receive an error message when you install an Office program or you open an Office program or a document

  http://support.Microsoft.com/kb/838687

  I hope this helps!