Windows 7 500 event ID

Similar Questions

• IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

  IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

  This particular configuration is with Coldfusion 11. There is no errors in newspapers and the w3 service still works as are application pools. All websites and app pools run with transmission of authentication request.

  ColdFusion does not work with windows authentication and may be enforced as if reconfigured integrated instance to do this, if this isn't a matter of colfusion.

  Here is what I tried:

  1 I created a new user account with admin rights and disconnected and logged in as them and then make changes to the password on the server, and that didn't make a difference.
  2. I checked that all Web sites using the request pass through authentication.
  3. I checked that the application pool is also using the application-pass-through authentication.
  4. I looked to find errors in which case newspapers but don't see anything there either
  5. I also searched a failure in coldfusion logs and saw no more relevant here either, but I got colfusion running without IIS in any case.
  6. search of the roots of web for coded passwords hard and found nothing.

  If you have any ideas or any ideas let me know.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• VB6 DLL is not log messages in the Windows Server 2003 event log when it is called from an ASP page

  Hi all

  I have an ASP web application, I will create a "VBModule1" (VB6 Dll) instance of an ASP page and inside this method of "VBModule1" I create an instance of another VB6 Dll 'VBLogger', who calls App.LogEvent () to write messages to the event log.

  I tested the Web application on the develepoment (XP) machine and everything worked fine but when the user runs the Web application on the Production Server (windows server 2003) events are not saved.

  Friend missing the security settings of my ASP web app that needs to be configured on Windows Server 2003 for VB6 DLLs logging events?

  Please think as soon as POSSIBLE.

  IIS on Windows server 20003 version: 6.0

  Thank you.

  Hello

  The question you have posted is related to Windows Server 2003 would be better suited to the Windows Server community.

  Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Using Windows 7. Event ID 41, error "Kernel-power".

  Using Windows 7. Event ID 41, error "Kernel-power".  Bugcheckparameter1 0xffffffffc0000005, bugcheckParameter2 0xfffff880066267cc, bugcheckParameter3 0 x 1, parameter4 bugcheck 0 x 78.  False SleepInProgress. "After getting this twice, the error is not returned, but all the websites that have great graphics freeze.  Had not made any changes to the drivers, but still tried a restore, which failed.

  no problem with chkdsk/r, or sfc/scannow.  When I re downloaded Java 7 websites worked for about 5 minutes then went back to hanging.

  Hello

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  According to the description of the problem you are facing some performance issues with Windows 7 and receive the error message saying event ID 41, error "Kernel-power". To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

  Did you do changes on the computer before the show?

  In the meantime, I suggest to read the following article and check if it works.

  Of core Windows event error ID 41 'the system has rebooted without cleanly close the first' in Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/2028504/en-us

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• HP Pavilion drivers Windows 7 500 - 070

  I had to downgrade to Windows 7 on my 500-070 for many reasons (work) and now find myself without any wireless adapter drivers for the Ethernet adapter.

  Can someone point me in the right direction for these drivers?  Even the name/model of the wireless adapter and Ethernet adapter that comes standard with this model would be very useful.

  Thank you!

  Hello

  HP does not recommend the downgrading of a 8 delivered PC Windows.

  This driver Realtek WIndows 7should work for the integrated ethernet card.

  The driver (Atheros) Qualcomm for the ARB5125should work.

  Here are thespecificationsfor the HP PAvilion 500-070.

• Error: wininit lsass.exe windows server restart, event ID: 1000, 1001, 1015, 6005, 6006

  Hi everyone, I recently joined in a Banking Corporation as a leader of IT below support that I explained about an error that is impossible to fix.

  This company is running windows server 2008 r2 standard 64 bit OS sp1.

  HP proliant DL380 G7 intel xeon
  system processor: intel xeon E5620

  This company is facing this problem since April 2014 to cultivate the date, but the question not yet fixed because there is no COMPUTER administrator in this endeavour to maintain this server. So, in this company, I'm the only guy with COMPUTER knowledge and my management was waiting for me to fix this error and to run the server without any problem.

  The last few months I've corrected several server issues related in this society as windows update, windows daily backup, SQL server backup, user permissions, disk space low and network troubleshooting and equipment computer issues etc...,

  But come to this lsass.exe I am unable to solve this problem I tried many ways to research online, but not yet fixed. Below you will find the details.

  *) fix for windows server 2008 R2 Standard sp1

  After the failed to install installation
  Fix for Windows (KB2545850)

  *) Tried to use the system tool
  But failed to solve problem

  *) I tried this command at the command prompt
  sfc/scannow
  result
  Full check of 100%.
  Windows resource protection did not find any breach of integrity.

  *) I also tried to change the registry of one of the web links of dell values, but there is no change at all.
  http://www.Dell.com/support/article/us/en/19/SLN291309/en

  *) I thought installing the fix and some other updates in safe mode only to try my luck, but when I tired to start the server in safe mode it takes a long time to start in it. But, I'll try again if this issue is going to fix through safe mode then please advise me on this.

  So to come back to this question, at the time of the restart, a small window will pop up as below.
  Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now.

  *) I tried this in shutdown command prompt cmd - to stop this judgment but does not any.

  *) I've tried many ways to solve this problem, but none of them worked for me even I tried to upgrade from sp1 to sp2 but could not do so for the following reason:
  https://www.Microsoft.com/en-US/Download/details.aspx?ID=17669

  After downloading the software from the link above and when I tried to install error appear below.
  This service pack does not apply to the version of windows running on this computer.

  It is the only question that is impossible to fix. So, I need expert help to resolve this issue as soon as POSSIBLE.

  Note: I can not reinstall the operating system on this server because it runs many applications on the SQL 2008 database and also it is already configured with many services and I don't really know how many applications do I need to take a backup and how to configure manually. so if I reinstall OS and if I'm bored configurations or settings and then it will be difficult for employees who work on these applications. So I don't want to take the risk of doing as I said I am new to this company.

  Additional information: this sever when ever it will pop up as server will restart in one minute then it restarts to 3 times without any gap, then after an interval extended from 3 to 4 hours, then it will follow even as I said above. To understand better, I'll give you this good example: If the server restart to 09:00, then 2nd reboot will be at 09:02 and the 3rd reboot will be at 09:04 and then after 3 to 4 hours apart, as about 13:00 it restarts again for 3 times vice versa.

  Even I understand that I have to reinstall the OS to fix this stupid problem which is like a nightmare for me, but right now, I can't. So, please help me to solve this problem without reinstallation of server operating system.

  I expect the best answer to my question that will solve my problem without any problem to this server.

  Below the five examples are the main reason for my server restart. If you need anything that either more information please advice me I will answer according to your instructions.
  Event ID 1000
  Event ID 1001
  Event ID 1015
  Event ID 6005
  Event ID 6006

  Below, I have collected more information of the observer of events and even from now this server restarts again due to this error, I don't know what to do...!

  1st error:

  -System
  -Supplier
  [Name]  Application error
  -Event ID 1000
  [Qualification] 0
  Level 2
  Working 100
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479745
  Application of channel
  Security
  -EventData
  Lsass.exe
  6.1.7601.18443
  5348920c
  ntdll.dll
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  220
  01d16482b15bac9c
  C:\Windows\system32\lsass.exe
  C:\Windows\SYSTEM32\ntdll.dll
  5518c7e0-d091-11e5-88FE-68b5996a1808

  1 details of the error:

  The failing application name: lsass.exe, version: 6.1.7601.18443, time stamp: 0x5348920c
  The failed module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
  Exception code: 0xc0000374
  Offset: 0x00000000000c4102
  ID of the process failed: 0 x 220
  Start time of application vulnerabilities: 0x01d16482b15bac9c
  The failing application path: C:\Windows\system32\lsass.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  2nd error:

  -System
  -Supplier
  [Name]  Windows error reporting
  -EventID 1001
  [Qualification] 0
  Level 4
  Task 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479746
  Application of channel
  Security
  -EventData
  0
  APPCRASH
  Not available
  0
  Lsass.exe
  6.1.7601.18443
  5348920c
  StackHash_802c
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  0
  5518c7e0-d091-11e5-88FE-68b5996a1808
  4

  2 details of the error:

  Bucket of error, type 0
  Event name: APPCRASH
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: lsass.exe
  P2: 6.1.7601.18443
  P3: 5348920c
  P4: StackHash_802c
  P5: 6.1.7601.18247
  P6: 521eaf24
  P7: c0000374
  P8: 00000000000c 4102
  P9:
  P10:
  Attached files:
  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  3rd error:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Wininit
  [Guid]  {206f6dea-d3c5-4d10-bc72-989f03c8b84b}
  [EventSourceName]  Wininit
  -EventID 1015
  [Qualification] 49152
  Version 0
  Level 2
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479747
  Correlation
  -Execution
  [Pr

  ocessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  C:\Windows\system32\lsass.exe
  255

  3 details of the error:

  A process of critical system, C:\Windows\system32\lsass.exe, failed with status 255 code.  You must now restart the machine.

  error 4:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6005
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 35:43.000000000Z
  EventRecordID 479787
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  CreateSession
  00000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000000
  In bytes
  0000: 00 00 00 00...

  4 details of the error:
  Winlogon notification subscriber takes a long time to handle the notification event (CreateSession).

  error 5:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6006
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 36:39.000000000Z
  EventRecordID 479792
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  116
  CreateSession
  04000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000004
  In bytes
  0000: 04 00 00 00...

  Details of the error 5:
  Winlogon notification subscriber was 116 second (s) to handle the notification event (CreateSession).

  Thanks forward,

  SAI

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• Windows 7 problem Event Name: BlueScreen__ OS Version: 6.1.7600.2.0.0.768.11__

  I get this error when you use the internet, the blue screen and it restarts. I checked and recontroler drivers please help.

  Thank you

  > Signing of the problem:
  > Problem event name: BlueScreen
  > OS Version: 6.1.7600.2.0.0.768.11
  > Locale ID: 1033
  >
  > More information about the problem:
  > BCCode: 19
  > BCP1: 00000020
  > BCP2: FDE42558
  > BCP3: FDE42588
  > BCP4: 4A0600AB
  > OS Version: 6_1_7600
  > Service Pack: 0_0
  > Product: 768_1
  >
  > Files helping to describe the problem:
  > C:\Windows\Minidump\090610-26566-01.dmp
  > C:\Windows\Temp\WER-33384-0.sysdata.xml
  >
  > Read our online privacy statement:
  > http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
  >
  > If the online privacy statement is not available, please read our privacy
  > Statement offline:
  > C:\windows\system32\en-US\erofflps.txt
  >

  The minidump files show constantly the csrss.exe process break with a BAD_POOL_HEADER stop error (19) referencing the win32k.sys.

  It's probably another pilot, a third-party driver that is causing the problem.

  I would say, at this stage, to enable verifier against any non-Microsoft drivers to stress test them and try to eliminate a problematic driver:

  Start > type check in the search programs and files, then press 'Enter' > create standard settings > next > select the names of the drivers in the list > select all non-Microsoft drivers > finish

  Restart the computer.

  Continue to use the computer normally but if you have any available BSOD brand minidump files.

  If after the activation of the Verifier and restart the computer, you receive a BSOD on startup and cannot start Windows, restart the computer in "safe" mode, and follow these steps:

  Start > type check in the search programs and files, then press 'Enter' > delete existing settings > finish

  Restart the computer, log in Normal Mode and make available any resulting minidump file

  I would also say, before you enable Driver Verifier, to download, install, update and run (quick scan should be sufficient) Malwarebytes' Anti-Malware (free version), in the case of McAfee missing something:

  http://www.Malwarebytes.org/MBAM.php

• Guard judgment of Windows XP. Event Veiwer Watch: \Device\Harddisk0\D, has a bad block

  I have a Dell Dimension 2400 with Win XP PRO SP3. It keeps closing after half an hour to an hour. The event viewer shows the following error in the system log: \Device\Harddisk0\D, has a bad block

  Same thing happens in Safe Mode as well. I ran McAfee who reported no virus. I have auto-updated from Microsoft on and just installed the lates updates.

  Help, please. Thank you... Nam

  Speed stop?

  Unexpected/unpredictable and quick stops are generally caused by overheating or bad RAM modules.  This happens too fast to create an entry in the newspapers.  Try downloading / running the freeware 'CoreTemp'.  It will show you how hot your CPU is getting and how close to maximum temperature, it is.  If this is your problem, open your folder and check your fans to make sure they turn all.  Use a can of compressed air to remove dust, because it can act like a blanket and heat your components.

  To solve your problem of bad block, run "Chkdsk" with the 'repair' or ' / R ' option.  This should clean up your bad block problem.

  "How to perform the disk error checking in Windows XP"

  <>http://support.Microsoft.com/kb/315265 >

  HTH,

  JW

• Freezing of Windows Explorer (problem event name: AppHangB1 application name: Explorer.EXE)

  my laptop freeze everytime I try to copy files from one disk to another, and here is the problem report

  Problem event name: AppHangB1

  Application name: Explorer.EXE

  Application version: 6.0.6002.18005

  Application timestamp: 49e01da5

  Hang Signature: e36f

  Hang the Type: 4

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  Signing of additional blocking 1: 84a74b2e2362b73156ffd8ce815ab7de

  Signature of blocking additional 2:0433

  Signing of additional blocking 3: 7ac408085f85bc7b4993b6de39385374

  Signing of additional blocking 4: ef2c

  Signing of additional blocking 5: 7192d5cf15e616a12e2e559236f7057d

  Signing of additional blocking 6: a5d3

  Signing of additional blocking 7: 9338adb319feac4f0ba33134abc2bfbc

   

  Original title: problem event name: AppHangB1 application name: Explorer.EXE

  Hello

  1 did you change on your computer before this problem?

  2. this problem occur when copying all the files?

  3. you try to copy files to an external drive?

  You can check if the problem exists in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  (For Windows Vista)

• Performance diagnosis is not available in the Windows Server 2008 Event Viewer

  In Event Viewer, I can see the Microsoft-Windows-Diagnostics-Performance/operational under Windows 7 but I couldn't get under another computer running Windows 2008. Is it possible to allow that?

  Hello

  Your Windows is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Help! Windows Device Trigger - event (Task Manager)

  I'm doing a task, the trigger being that when a device is plugged in it will run the task

  Here is where I am:
  so far, I've done the "has started the task', 'on an event", that puts me to the next window now, this is where I can't understand it, my guess is that the newspaper is MATERIAL (either that or system), so the real question is what newspaper, source and event id supposed to be. I know all about the unit (all properties) so just use tags thanks :)

  Hi Noname459,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Vista on TechNet. Please post your question in the TechNet Windows Vista Forums.

• Windows system error - event id 12 of HAL.

  Hello

  I use a PC HP Pavilion m8120n Media Center, which has been upgraded to Windows 7 Professional (32-bit) SP1.

  Current BIOS is dated 5.09 Date 08/06/2007 revision.

  In the Windows system log, I noticed that whenever the PC goes into sleep mode (standby), it generates a HAL error with event id 12. It says low memory was damaged when going in standby mode.

  The Microsoft documentation says that it is a BIOS problem. I checked the site of HP support for a BIOS update, but found none listed. I noticed that HP offers some laptops BIOS updates to fix this.

  Is there an update available for the m8120n BIOS solve this problem?

  Kind regards

  Rick

  Hello

  The problem has occurred with your previous operating system?

  There is not an update of the bios posted for your PC.

  You can read this article.

  You can try to clear the CMOS memory.  Given that your PC is of 5 years which is on the life expectancy of the CMOS battery, you might consider replacing it.  It's a $4 item.

  The suggestion below is a long shot for a possible workaround if you ae not not using RAID.  If you do want to try the suggestion below, then you will have to live with the question.

  The default sata mode setting is RAID.  If change you it to AHCI then the storage option rom cannot require CMOS space. You may need to reinstall the operating system. There is a possible workaround solution to reinstall the operation.  Don't forget to backup your data. Run the MS patch. Then boot in the bios (f10 setup) and change the sata controller to ACHI mode and save the settings.  If the PC does not start, then change the setting back of the bios.

• Computer crashes microsoft windows security audit event id 4624.

  Hi all.. Im having some problems with my computer hanging while I listen to music these days... I looked in the Windows Event Viewer and that's what I found with the corresponding times. It's only annoying of any help that you can suggest would be great. I'm using Windows 7 64 bit

  Error description:
  An account has been connected successfully.

  Object:
  Security ID: SYSTEM
  Account name: MATT-PC$
  Domain account: WORKING group
  Logon ID: 0x3e7

  Logon type: 5

  New logon:
  Security ID: SYSTEM
  Account name: SYSTEM
  Account domain: NT AUTHORITY
  Logon ID: 0x3e7
  Logon GUID: {00000000-0000-0000-0000-000000000000}

  Process information:
  Process ID: 0 x 204
  Process name: C:\Windows\System32\services.exe

  Network information:
  Name of the workstation:
  Source network address: -.
  Source port: -.

  Detailed authentication information:
  Logon process: Advapi
  Authentication package: negotiate
  Transited Services: -.
  Package Name (NTLM only): -.
  Key length: 0

  This event is generated when a session is created. It is generated on the computer that was consulted.

  The fields of the object indicate the account on the local system that requested the opening of session. It is more often a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.

  The logon type field indicates the type of logon that occurred. The most common types are 2 (interactive) and 3 (network).

  The new session fields indicate the account for which the new logon was created, which is the account that was logged.

  The network fields indicate where source opening of remote session request. Workstation name is not always available and may be left blank in some cases.

  The authentication information fields provide detailed information on this specific logon request.
  -Connection GUID is a unique identifier that can be used to correlate this event with a KDC event.
  -Transit services indicate which intermediate services participated in this logon request.
  -Name of the package indicates what auxiliary Protocol was used among the NTLM protocols.
  -Key length indicates the length of the generated session key. This will be 0 if no session key was requested.

  Details

  - < event="" xmlns=" http://schemas.microsoft.com/win/2004/08/events/event ">"
  -< system="">

    < provider="" name=" Microsoft-Windows-Security-Auditing " guid=" {54849625-5478-4994-A5BA-3E3B0328C30D} ">

    < eventid="">4624

    < version="">0

    < level="">0

    < task="">12544

    < opcode="">0

    < keywords="">0 x 8020000000000000

    < timecreated="" systemtime=" 2009-12-10T00:50:23.253155100Z ">

    < eventrecordid="">9073

    < correlation="">

    < execution="" processid=" 540 " threadid=" 1596 ">

    < channel="">Security

    < computer="">mast - PC

    < security="">

   

  -< eventdata="">

    < data="" name=" SubjectUserSid ">S-1-5-18

    < data="" name=" SubjectUserName ">MATT-PC$

    < data="" name=" SubjectDomainName ">WORKING GROUP

    < data="" name=" SubjectLogonId ">0x3e7

    < data="" name=" TargetUserSid ">S-1-5-18

    < data="" name=" TargetUserName ">SYSTEM

    < data="" name=" TargetDomainName ">NT AUTHORITY

    < data="" name=" TargetLogonId ">0x3e7

    < data="" name=" LogonType ">5

    < data="" name=" LogonProcessName ">Advapi

    < data="" name=" AuthenticationPackageName ">Negotiate

    < data="" name=" WorkstationName ">

    < data="" name=" LogonGuid ">{00000000-0000-0000-0000-000000000000}

    < data="" name=" TransmittedServices ">-

    < data="" name=" LmPackageName ">-

    < data="" name=" KeyLength ">0

    < data="" name=" ProcessId ">0 x 204

    < data="" name=" ProcessName ">C:\Windows\System32\services.exe

    < data="" name=" IpAddress ">-

  Thank you for any information you can provide... im a noob when it comes to such things.

  Hi Mkress,

  Welcome!

  You can get this error if Windows Error Reporting Service does not start, try to restart the service on the computer and check if the problem persists or not, follow the steps below to start the service:

  1. click on start.

  2 type Services in the start search.

  3. look for Windows Error Reporting Service in the list.

  4. right click on the Service.

  5. click on properties.

  6. set the Startup Type to automatic.

  7 set the starting state.

  8. click on apply.

  9. click on OK.

  Now restart the computer for the changes to the effect.

  I would say that you do the check disk on the computer to find the bad sectors and disk related errors on the computer, follow these steps:

  1. the procedure for chkdsk to run:

  i. Click Start

  II. type cmd in the start search box.

  III. right-click on cmd.exe list programs and then select the run as Administrator option.

  IV. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  v. in the command prompt window, type the following command and press enter Chkdsk/r

  Note: When you restart, Windows checks the drive for errors, and then Windows starts. Now, run the disk check in the command prompt.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• features of Windows 7 pc Event Viewer

  the other day, so that navigation event viewer and explore what all the tools in the toolbar, or the opening of subscriptions or it could be analytical see debug logs... ? and whatever it is, he did so as long I know a few years, he goes to a wink in error, this is not a loophole situation with some options that I have no idea of what they are, and Ctrl alt delete seems the quiet way only to deal with, like the other give windows options with an important collapse.  Well well the other day, open the event viewer, I was greeted with a wink by mistake that covered several errors, I had no idea they were and started hitting the close button and the other options to will be and event viewer will stop. Now, I can get into the event viewer, but if I open or take place custom views. the screen flashes and then disappears from the event viewer, with no nada. Except if I go into Windows and applications logs and hit the properties of event I get this: log name: Application
  Source: Adobe Reader
  Date: 28/04/2016-12:28:05 AM
  Event ID: 0
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: ocean
  Description:
  The description for event ID 0 in source Adobe Reader cannot be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  The event XML:
  
   
     
      0
      4
      0
      0 x 80000000000000
     
      214723
      Application
      Ocean
     
   
   
   
  

  is it a normal thing? can we see the coded message here, if there is one, how to fix this? Thank you

  Understand and interpret the event viewer reports are not an easy task. In the link below some basic information on the use of event viewer are detailed, which you may find useful:

  http://www.gerryscomputertips.co.UK/syserrors5.htm

  You pasted an event ID: 0 report in your message and asked can we see the cipher here. As a user who has considered several reports, my answer is no. The reason for the report is obscure and like the event viewer reports that it's probably simply reports for example, an event that something important has not been done. My experience tells me to go and find a larger report. If you have a problem with Adobe Reader search the application log.

  The wording in the paragraph immediately below, commonly appears in many reports of the event viewer.

  The description for event ID 0 in source Adobe Reader cannot be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  You probably won't find any official explanation for why it happens. It is not generated universally and arises only on specific computers. It is obvious, because for some reports of the event ID, you can see two variants of the same report.

  A report short event 20 as it should be:

  Log name: System
  Source: Microsoft-Windows-WindowsUpdateClient
  Date: 03/01/2015-16:30:23
  Event ID: 20
  Level: error
  Description:
  Installation failure: Windows failed to install the following update with error 0x800703f9: update for Windows 7 for x 64-based systems (KB3020338).

  An event report 20 abstract, showing the problem:

  Log name: System
  Source: Microsoft-Windows-WindowsUpdateClient
  Date: 26/11/2015-15:29:23
  Event ID: 20
  Level: error
  Description:
  The description for the 20 from source Microsoft-Windows-WindowsUpdateClient event ID is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
  If the event is on another computer, the display information had to be saved with the event.
  The following information has been included in the event:
  2149851149
  Upgrade to Windows 10 home page unilingual, version 1511, 10586
  EV_RenderedValue_2.00
  201
  EV_RenderedValue_4.00
   
      0x8024200d
      Upgrade to Windows 10 home page unilingual, version 1511, 10586
      {1C9F8193-45FF-42DF-8BA2-7DE52C1085A4}
      201
      {9482F4B4-E343-43B6-B170-9A65BC822C77}

  The section above highlighted in red appears in most / many reports. When you encounter a report as the second example, locate the section highlighted in red for the most useful explanation of what the report is.

• Windows 7 system event Notification services error

  Today, the screen was different and wa Windows 7 does not properly. I got this message "unable to connect to a windows service. Windows could not connect to the System Event Notification Services service. This problem prevents the limited number of users logging on to the system. As an administrator user you can view system event log to see why services did not respond. »

  Other messages on this guy named Windows Vista. I use Windows 7. Can someone tell me please how to fix this?

  Thank you

  I have now managed to solve the problem by doing a system restore. He has really worked. Click Start, type system restore in the search box, click System Restore, and then click on "choose a different restore point. A date will go up which was the last restore point I guess and keep clicking next and follow the instructions. It can work for you. I would be interested to know how you go.