Windows 7 64-bit error code 800b0100.

Similar Questions

• Windows vista 32-bit error code 0 x 80070424 - the Security Center service cannot start

  Hello.

  I have Vista Home premium SP2, 32-bit operating system. A week ago, I received a .rar file, Avira has said has been infected. I did not open the file, I deleted, ran a complete analysis of the system and assured there was no residue. However, after that, I realized that the defender was not on and then realized that my firewall did not work either.

  Specificities of each:
  (a) it seems that my firewall has disappeared, and specifc messages I get when trying to turn on my firewall is: "could not start the Security Center service. When I run services.msc, I am not at all a security service, all I have is a security accounts manager.
  (b) when I try to activate Defender, I get the error code 0 x 80070424. «Windows Defender encountered an error: 0 x 80070424.» The specified service does not exist as an installed service. »

  I tried 5 different Microsoft its difficulty, but none have worked so far. I also tried to reinstall Windows Defender, but Microsoft said that I installed it. All updates are underway. I followed the steps in this link: http://support.microsoft.com/kb/968002 and no. chance either. I used additional resources and tried following these steps also, but all services have already started on my system.

  Can you help me please?
  Much appreciated,
  ~ naila

  Hello nailal,

  Please follow the advice given in the article below:

  Article number: 968002 -.

  Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall Please reply back and let us know if this can help. Thank you Marilyn

• Wired controller Xbox does not not on Windows 7 64 bit (error Code 37)

  I'm having a problem with a wired Xbox controller. When I go into the Device Manager, it says that there "error code 37: Windows cannot initialize the driver. I tried already on the Xbox site support options, however, has not worked. After that, I tried to start the computer in safe mode and inserting the controller to install the drivers it. It worked in safe mode, but when I restarted in normal mode, it did not work. I also tried on another, less powerful computer, and it worked, so this isn't for lack of the computer.

  Help would be very appreciated

  Thank you

  Hello

  I suggest you follow the steps mentioned in the link:

  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-help

  If that doesn't help, ask your questions on the following forums.

  http://support.Xbox.com/en-us/Xbox-360/accessories/connecting-game-controllers

  It will be useful.

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.

  I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.  Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem.  What should I do?

  Hi Nita,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.

  I suggest you try the procedure described in the article and see if it helps.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.

• Windows vista update 80246008 error code

  Windows vista update 80246008 error code

  You must be logged in as an administrator to perform these steps.

  If you receive Windows Update 80246008 error when downloading updates, you might need to change the (BITS) Background Intelligent Transfer Service or the Windows event log service settings and restart each service.

  To change or restart the Service (BITS) Background Intelligent Transfer

  1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3 right-click the Background Intelligent Transfer Service (BITS) service and then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic (delayed start) is selected.

  5. next to Service status, check whether the service is started. If not, click Start.

  To change or restart the Windows event log service

  1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. right click on the Windows event log service and then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic is selected.

  5. next to Service status, check whether the service is started. If not, click Start.

  If the problem persists after you follow the steps above, go to the Windows Update Support Center website to request support by e mail. https://support.Microsoft.com/OAS/default.aspx?Gprid=6527&St=1&wfxredirect=1&SD=GN>

  OR

  Try here and see if Russell Pope is available, if not, try another available technology.

  http://supportservices.Microsoft.com/support/services/windows_update>

  UTC/GMT is 10:53 on Sunday, December 25, 2011

• I search for updates and tell me that two important updates are available for my system but when I try to install I get error code 800b0100

  I search for updates and tell me that two important updates are available for my system but when I try to install I get error code 800b0100

  http://support.Microsoft.com/kb/956702

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.

  If the above does not resolve the problem:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• Windows Update 8007371 B error code «»

  I spent from Vista to Windows 7, use PCMover to help transfer. I'll have two problems (1) won't install Norton anti-virus (Norton is okay) and update of windows gives me an error code "8007371B".  Any ideas? Thank you

  Try:

  Description of the system update tool for Windows Vista, Windows Server 2008 for Windows 7 and Windows Server 2008 R2http://support.microsoft.com/kb/947821>

  The 0x8007371B error can be caused by an irregularity of the system that theSystem Update Rpoints Tool may be able to solve. However, the tool may be unable to fix all instances in which these errors occur.

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

• Windows Update KB948465 8024200d error code failed.

  Windows Update KB948465 8024200d error code failed.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• MSE uninstalled by an automatic update of Windows XP SP3. Error code 0 x 80070642.

  MSE uninstalled by an automatic update of Windows XP SP3.  Error code 0 x 80070642.
  It will not reinstall.  Tried to restore the operating system to an earlier date.
  Have tried to repair the original operating system with the OS installation CD.
  Spin without MSE and tasked a free anti-virus software in the meantime.

  For problems with Microsoft Security Essentials, you can submit to submit a support case online.

  Note: You may need to remove avast completely before attempting to reinstall MSE.

• Try to update windows - (8007000D - has no error code) stops windows completely updated. Fixes for this error code?

  I tried to completely update of windows, but the 8007000D error code keeps causing the update fails. The update is for - Cumulative Update for Media Center for Windows Vista (KB982480). Could you be it someone please let me know if there are patches to get rid of this error, or get the update to pass by? Thank you!

  Hello

  You are able to install some other updates?

  I suggest you follow these methods and check.

  Method 1: Run the fixit.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/   

  Method 2: Run the clean boot and install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  If the method above does not work, proceed to the next method.

  Method 3: download and install the Cumulative update for Media Center for Windows Vista (KB982480) from this link.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=6256

  If the method above does not work, proceed to the next method.

  Method 4: Rename the Software Distribution folder.

  Rename the temporary Windows Update Software Distribution folder. To do this, follow these steps:

  1. Open an administrative command prompt window.
  2. Run the following commands and press ENTER after each command:
  3. 1. Net stop wuauserv
     2. CD %SystemRoot%\System32
     3. Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     4. Net start wuauserv
  4. Try to install updates again.

  Important: When you use this method, the following problems occur:

  ·         Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.

  ·         When you remove the Software Distribution folder, your download history is deleted.

  ·         If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  Note If the problem is resolved and you can successfully download and install the updates, you can safely remove the SoftwareDistribution.old folder to recover disk space.

  I hope this helps!

• Windows Live Photo Gallery error code: 0x800736b1

  Windows Live Photo Gallery error code: 0x800736b1 (window live photo gallery encountered an error loading WLK Photo LibraryMain.dll and cannot start.  Need to know how to fix it

  I got tired of what you say, and it has not fixed the problem. always the same error message. I tried to uninstall and reinstall windows live photo Ghent will not always work.

  Hi tlc33kac

   

  You can check the links below and check out them if the steps to help you resolve the issue-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/i-try-to-open-a-photo-on-Windows-Live-Photo/74e26c19-9376-E011-8dfc-68b599b31bf5

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-codes-ox80073661/e2b11700-fe86-4663-8f27-731b67ebaf12?msgId=b95e5d54-5da2-497d-a2fc-80a9ec672a59

  If the problem persists, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the links below to find a community that will support what ask you in the right direction for Windows Live.

  http://windowslivehelp.com/product.aspx?ProductID=20

   

  I hope this helps.

• When the updates of windows I get and error code for 643. How can I fix it?

  When the updates of windows I get and error code for 643. How can I fix it?

  When the updates of windows I get and error code for 643. How can I fix it?

  Here is an answer which is marked as an answer to the error code 643.

  I also participated in that thread, and I gave my suggestions.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/what-is-error-code-643-Windows-vistaunable-to/4ab6dd4e-e9eb-4a0f-b822-ad976e2c33c6