Windows 7 (64 bit) for Tecra M9 drivers
When will be possible to download drivers for Windows 7 64 bit?
As far as I know Win7 will be support begins when the Win7 is officially released. According to various sources, he should be in October/November.
So, we have to have patience and wait for Toshiba begin Win7 support. I use it on my Satellite Pro P300 and want to have all the drivers too.
Tags: Toshiba
Similar Questions
-
Drivers for Windows 7 64-bit for HP Pavilion 15-p125ng
Can someone help me with drivers for Windows 7 64-bit for HP Pavilion 15 - p125ng? I'll be very grateful for answers
Hello:
You should be able to use the drivers and software for this model on your...
When you install the graphics you need to install these drivers in this order and restart after each installation.
1 chipset installation utility.
2. Intel HD graphics driver.
3. Nvidia HD graphic driver.
-
Can I downgrade Windows 8 64-bit for Windows 7 64-bit?
Can I downgrade Windows 8 64-bit for Windows 7 64-bit?
And also my drivers continue to operate?
I have only one installation of Windows 7 disk and want to make sure that I could use it incase if my computer goes down / gets corrupted / ect. Since I formatted acccidently my OEM drive when I take away a lot of partitions, I did.
My computer:
Model: HP 2000 Notebook PC
Model No.: C2N26UA #ABA
OS: 8 64-bit Windows
Additional info: my computer came with Windows 8 64-bit pre-installed.
Hello:
First of all, make your game of W8 recovery discs before proceeding.
All the W7 x 64 drivers of this Associates model should work on yours.
The driver is missing (and is for any laptop AMD) and it's the chipset driver that installs the SMBus Controller and the USB 3.0 controller.
You should download and install this driver first and then restart. First download listed is what you need.
http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2
Then install the graphics driver and restart, then install the audio driver and restarted.
-
DRIVERS FOR WINDOWS 7 32 BITS FOR HP 240 G3 MODEL
BOUGHT THE NEW LAPTOP HP 240 G3 K1C59PA
BUT IMPOSSIBLE TO FIND A DRIVER FOR WINDOWS 7 32-BIT OPERATING SYSTEM PLEASE HELP ME IS NOT ABLE TO FIND ANY WHERE
THANX
Hello:
Install all the drivers section of chipset.
If your model has an Intel graphics card, simply install the graphics driver Intel HD graphics section.
You need the driver Realtek ethernet subnet.
You need the Realtek card reader driver under storage.
I don't know what model wireless card use your model, so please do the following, and I figure that out and tell you what you need for that driver.
Go to Device Manager and click on the device named network controller.
Then click on the Details tab in the upper part of the window network controller.
Now, you see a drop-down list of property and it is set by default to the Description of the unit.
On this list and select the item named hardware ID
After the first string of characters you see in the window that begin with PCI\VEN.
After you have installed the drivers that I suggest that you should have most of the installed devices.
You can find the ID of the hardware for all remaining devices that need drivers using the method described above, and I'll post the links to those too.
The first line of unknown devices does not start with PCI\VEN. But display the top for all those line too.
-
drivers for windows 7 (64 bit) for HP pavilion g6-2230tx
I need drivers for my pc of pavilion laptop g6-2230tx for windows 7 64 bit os. It was first available in the HP website, but now it's the display drivers only for windows 8 and 8.1. Please tell me where I can get these readers. ???
Hello:
You can use all the drivers and software on your model except the bluetooth.
Your model uses the AMD graphics driver only. Do not install the Intel graphics driver or your graphics swithable will not work.
Your model uses the Ralink wireless LAN driver and Realtek LAN driver.
DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE OF THIS MODEL
Use this bluetooth driver and software.
-
Drivers for windows 7 64-bit for HP Pavilion p6-2485eo
Greetings
I offered my help to a person who has recently bouht this PC:
HP Pavilion series p6
Serial number. CZC 317255S
Product number. D2K72EA #UUW
Model number. P6-2485eo
Windows 8 didn't work at all for the owner of the PC, this is why we bought the new version of windows 7 64 bit and installed it. This poses problem regarding alle drivers missing.
Unfortunately the home on HP drivers does not support nothing underneath to win 8.
I would therefore like to ask your help with regard to drivers for; motherboard, usb3, and other relevant factors, as you may think.
The graphics driver is correct and installed directly from nvidia.
I hope you will help us.
Thanks in advance.
Greetings from Thomas
Hi, Thomas:
You should be able to use all the W7 x 64 drivers and software for this model on the link below (except the graphics).
DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK
You can use this graphics driver (but I see that you already have that).
-
Need drivers for Windows XP (32-bit) for Satellite L350D - 12 M
Hello.
Where can I find a driver for Windows XP for Mobile Satellite L350D - 12 M?
I did not find them on the Web from Toshiba website.Please help me.
Of course, your laptop model is not supported WXP and this is the reason why you can't find the drivers.
If you can't find on the Toshiba support page why you think you will find them elsewhere?What you can try is to use drivers Windows XP Home edition for similar laptops, with the same hardware models.
It is not just, but I see it as the only solution. Maybe the drivers for A300D will work on your laptop. -
Need windows 7 32 bit for Satellite R630 - 11L
Can someone help me locate the 32-bit drivers for Windows 7 for Satellite R630 - 11L,
I have not found for windows 7 64 bitHello
I didn t find a full range of Win 7 32 bit drivers for Satellite R630 on the European driver Toshiba page as you say, just 64-bit drivers are available.
You can try to install 64-bit drivers on Win 32 bits of the system. In many cases, this should be possible.
In cases where this is not possible, try drivers from other series of satellites
It s worth a tryBut why do you want to switch to 32-bit? 64 bit OS is better if your computer supports 4 GB of RAM or more
-
Impossible to install the SoundMAX for Tecra M2 drivers after install own WXP
Hey,.
I need help, is the audio driver for tecra m2 laptop
+ soundMAX integrated digital audio + * Version: * + 5.12.1.5160 +
I recently wiped the computer with a clean installation of windows XP. All drivers seem to work fine after installation, except sound related. When I try to install the SoundMAX driver correct (I know it's okay, I have another computer laptop tecra m2 is exactly the same) the following error message is displayed right at the end of the installation.
+ "The driver does not exist! Restart your system and run this installer again. » +
When I reboot, the same thing. I installed the drivers from the chipset intel, rebooted and tried: same result.
When I go into Device Manager, all devices are taken into account except an unknown device, which is a yellow questionmark with a small exclamation mark on it. The device soundmax isn't here.
I also tried to reinstall windows and then the drivers with the sound result last, even.I would appreciate if someone can help me solve this problem. If you need data from the system and you know a program to obtain the data in the system, send me a link and I'll post the data.
See you soon,.
RobHello
Try please install all things following this order of installations:
Windows XP Pro SP1a Edition
Intel Q332179 mobile CPU driver
AggressiveC3
Intel Chipset Software Installation Utility
Toshiba Common modules
Display driver for nVIDIA GeForce FX go 5200 display driver
SoundMAX Integrated Digital Audio
Alps Pointing Device Driver
Toshiba dual pointing device utility
Driver modem
Intel Pro/100 VE Network Connection
Intel Pro/1000 MT Mobile connection
Wireless Lan driver
Wireless keyboard shortcut
Infrared driver
Windows SD host controller driver
SD memory boot utility
SD memory card format
Bluetooth stack
Fix for "Microsoft Bluetooth with Bluetooth" Q323183
TOSHIBA Hotkey for display devices
Toshiba display device change utility
Zoom utility
TOSHIBA Power Saver
Toshiba Mobile ext.
Toshiba Utilities
Toshiba console
Toshiba controls
TOSHIBA ConfigFree
Toshiba Audio effect
CD/DVD Drive Acoustic Silencer
DVD - RAM Driver Software can only be used with DVD-RAM support -
need driver windows 7 64 bit for HP 2000-2d27CL
I need driver windows 7 64 bit, help!
Thank you
Hello:
First install the amd chipset drivers and reboot. You want the first file on the Web page.
This will install the smbus controller.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
Then, install the beta amd radeon catalyst graphics driver.
http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx
Audio: Accept the agreement, download and install the driver for the second on the list.
Ethernet: DL and install the 3rd driver on the list.
Card reader: DL and install first driver on the Web page.
Webcam:
Wireless:
-
Install HP fails under Windows 7 64 - bit for Printer series CP1020
Hello!
I tried to solve this for days, and I've seen a lot of suspense/unresponded to messages about the same topic so I hope that someone sees this!
Product & number: Color LaserJet CP1025nw CE914A
Operating system: Windows 7 64 bit
Error message: HP LaserJet Installer has stopped working
Changes made to the system before the error occurred: We have updated our info from the router, so I ran the installation disc to reconnect the printer wireless. He uninstall programs initially added to the sleeve of the printer.
Details:
-Very well, so 3 days ago we updated our router SSID and password for security reasons. Apparently, there is no easy way to update the details of the network for the CP1025nw so I had to run the installation disc. It prompted me to uninstall the software, reboot, and reinstall. I scoured the guests and then choose 'connect via a wireless network. After searching for the network, I then choose 'installation of Wireless USB '. I have to connect the USB cable when prompted, and as soon as the installation of the drivers I get the Windows error message posted above. I've attached a screenshot of what appears as well.
Frustrating is that the printer still works after the installation, but only via the USB connection. I need to get wireless working again, but without the software installation work, I can't seem to get there (unless someone knows a hack/work around).
Event Viewer provides the following details about the error in the application:
The failing application name: hpbcsiInstaller.exe, version: 1.5.6.4020, time stamp: 0x4bbf9f17
Name of the failed module: hppccompio. DLL, version: 1.3.0.24, time stamp: 0x4c9685d0
Exception code: 0xc0000417
Offset: 0x000073bf
ID of the process failed: 0 x 970
Start time of application vulnerabilities: 0x01cdbc45b6632fa1
The failing application path: D:\Installer\hpbcsiInstaller.exe
Path of the failing module: C:\Windows\system32\hppccompio. DLL
Report ID: cb4d353b-2839-11e2-be7e-002564531498I tried a wide range of solutions and none of them does not seem to work. Everything from the firmware update, delete all instances of files HP, including .inf files, installation with startup programs and services as the basis because they can get, etc.
Help, please!
See you soon,.
Kirk
Okay, well that was a beast of a problem to say the least. I am so relieved to be done with this nonsense.
How it all started - a little recap:
We changed the password on our wireless network we have updated for security reasons. I could not find all that helped me update the details of the network (password or the SSID) directly on my printer and said all that I had to uninstall and reinstall everything (and re - run the wifi via USB connection). This is not the case - there is a much simpler solution that I have will cover also the end of this post. Anyway, as mentioned above, during the phase of the installation of device drivers, the installation program plant with the Windows message "HP Installer Setup has stopped working".
How I fixed it:
1. print a configuration page by pressing the button "resume" for a few seconds and let go. I have taken note of the following in the upper right:
Status: Not connected
Network in use: no
IP address: 0.0.0.0I myself am continued to ask me if I could connect the printer directly via the port ethernet so I...
2 connect a cat5 from my laptop to the printer.
3 printed a second Setup page. Now, I got the following information:
Status: connected
Network in use: Wired
IP address: 169.254.71.50
4. I opened my web browser and tried to 169.254.71.50, but the page wouldn't connect. I recently built a computer game and has found a way to bridge the internet from a laptop wireless to a wired device (http://www.youtube.com/watch?v=96Z1_6rX5qU) so I was wondering if this could work with the printer.
5 filled my network connections and wireless according to the video above.
6a open my web browser and once more tried to navigate to 169.254.71.50 and it WORKED! (Not sure if this IP address is unqiue for my printer, but printing a configuration report is the best place to find it.
7. I clicked on the Networking tab and then select Wireless Configuration.
8. from there, I was able to activate my wireless connection, my password wireless update and choose I wanted to connect to the wireless network! This is how you can update your wifi information without having to do a complete reinstall!
9. I now unplugged the ethernet cable (as suggested next to turn on/off radio buttons. My printer wireless power and is light stayed on. I have now connected once again!
10. I don't think it was a crucial step, but I also implemented printing mobile ePrint
11. I printed another page of configuration and can now see the following:
Status: connected
Periphery in use: wireless
IP address: 192.168.1.115
12. I can now navigate to the printer in my browser using this IP address and was able to find and print on my printer wireless through my phone, but still couldn't print from my wireless laptop.
13. I inserted the original installation CD, held my breath and clicked on install. Hold your breath here is optional.
14. He asked how I wanted to connect, and as before, I choose wireless. This time, instead of asking me to connect the USB, it FINDS my printer on the network. I chose this, clicked on continue and all installed successfully!
Everything is now back to normal! I can use my wireless printer once more. Please let me know if anyone has additional information on the steps above need, or if something does not work for you because there is no other solution out there. Believe me, I spent HOURS AND HOURS to research. I hope this helps some of you!
See you soon,.
Kirk
-
Someone at - it a way to correct the ST Microelectronics 3-axis accelerometer (motion detector) which will not work because I upgraded from 32-bit to 64-bit Windows 7? Given that the Intel Atom N550 is only dual core too slow, I am trying to extend the useful life of the convertible tablet with 4 GB of RAM and 64 bit version will use. In addition, I started by trying to upgrade to Windows 8 because there is an app I want to who does not work on Windows 7. Not only do you get the accelerometer fail to start, but the updates of Windows 8 removed my OS, so I had to restore Windows 7 32 bit from a backup. Then I tried to install Windows technical preview 10 because the app even says it will work with that, but the installation kept hanging up to 30%, so I gave up and tried Windows 7 64 bit. Still, no functional accelerometer, but at least updates all worked (so far, including sp1). Given that I intend to upgrade to 64-bit Windows 10 as soon as they release it (July according to technical support), I hope this driver setting.
In the Dell support forums, message by Carnino April 7, 2011 offers workaround using Microsoft .net SDK. Since it does not say which version has the CorFlags app, I have installed .net frameworks on 4 and Visual Studio 2010 upwards. At the Windows command prompt, I get errors saying that CorFlags was not a recognized command. I asked for help on the Dell forum even and installed the CorFlags there app. I saw flash by in the command line window, so he must have installed, but it is not yet a recognized order when I try to run it at the command prompt.
Then I tried Windows SDK 7.1 commands prompt, which also tells me "CorFlags.exe is not recognized as a command internal or external, an executable program or batch file." Now what? Is not a developer, I don't know if I have installed all the necessary tools for .net framework programs work, and I have no idea how to use the Visual Studio or if a version is mess up another version. Now, I have installed the Windows Driver Kit for Windows 8.1 because it says it does too many drivers for Windows 7, but it's an another shot in the dark.
I can use the orientation of the laptop computer screen if necessary when I flip the screen for Tablet of orientation, but it is annoying, especially for reading and editing of books while I walk, the main use for which I bought this Duo.
No, I can't afford to buy a Tablet convertible new again, especially rare with a decent size hard disk. I don't trust books of my clients to cloud storage. Please help if you can. Thank you.
Try this driver for Windows 7 64-bit:
http://downloads.Dell.com/FOLDER01182758M/1/System-Utilities_Driver_V3J22_WN_2.2.2.2_A00.exe
I have yet to find a driver for Windows 10 TP.
P.S. If you want to extend the life of the SSD would be a good idea, something like 250-500 GB SSD BX100:
http://UK.crucial.com/GBR/en/compatible-upgrade-for/Dell/Inspiron-duo-%281090%29
-
Where can I find a Windows 7 64 bit for a Brother HL-1250 printer driver
I have an old Brother HL-1250 laser printer. When I got my new computer it came with Windows 7 64 bit installed. I plugged the printer, Windows recognizes the new device, downloaded the drivers and installed the printer. It worked fine for about a year. Then, a month ago, I tried to print with it in Excel and Excel told me it could not connect to the printer. I tried all Microsoft diagnostics and they did not help.
I decided to uninstall the printer and reinstall it. I first tried to install through Windows Update search a new driver. Who has failed, I got was a cryptic message that says "Fail", without further details. Then I tried to reinstall using the existing driver and got the same cryptic "Fail", once again with no details. I went on the site of Brother, he said brother has no driver, you have to get it from Windows Update. I went to the support for Windows 7, this site says to get the driver of brother. I did a search of the Knowledge Base and he set up a generic PCL driver he said would work. I downloaded and tried to install it, but it is 32-bit and windows wouldn't install it.
So I'm puzzled. Anyone know where I can get a driver 64 bit Windows 7 for the Brother HL-1250, or why the print has stopped working in the first place? TIA
Have you tried this driver?
-
I installed windows 7 64 bit, but have no drivers
I installed Windows 7, 64 bit. But it seems that all the drivers are missing. I have discs of windows, but so far, that doesn't seem to help. I post this question from another computer, as the WiFi does not work with the new facility, because it seems not to have the device.
Thank youChrisHow to install, update, and troubleshoot hardware in Windows 7 ...
-
How can I downgrade from Windows 8 64-bit for Win8 32 bit on my HP Envy?
Bought the HP Envy for my children, but their favorite a few months ago game requires a Java Update, which is not available for 64-bit Windows 8. We waited for an update is available, but it looks like it will take another few months...
So we decided to restore the system and wanted to change to 32 bit. Unfortunately, during the restoration there was no option to select 32-bit instead of 64-bit.
What can we do to downgrade successfully to 32-bit on Windows 8?
afgorkids,
Welcome to the HP Forum.
I admit that I might be missing your point, so bear with me...
This is an excerpt from Java to Windows 8 FAQ page:
Why only I get the 32-bit JRE when I go to Java.com?
Java.com offers a version of Java based on your browser and operating system (OS). If you are running a 64-bit version of Windows 8, you have access to 32-bit versions and 64-bit Internet Explorer 10 on your system. The desktop version of Windows 8 operating system does not run in 64-bit mode (unless you have improved in Internet Explorer 10 on Protected Mode), Java 32-bit is the default value.
Java downloads for all operating systems
Windows which should I choose?
Windows (32 bit) offline
file size: 27.8 MBInstructions
After installing Java, restart your browser and check that Java has been installed correctly.Windows offline (64-bit)
file size: 29.3 MBInstructions We have detected that you may be viewing this page in a 32-bit browser. If you are using 32-bit and 64-bit browsers interchangeably, you need to install Java 32 - bit and 64 - bit in order to have the plug-in for both Java browsers. " FAQ on Java 64 bit for Windows
Click on the thumbs-up Bravo !
It's a nice way of saying 'Thank you' for help.
While I strive to reflect best practices of HP, I do not work for HP.
Maybe you are looking for
-
is there something better than the Apple Superdrive for a hard drive external?
-
2 of 6 pages open, even after uninstalling and reinstalling
I write again, I lost it in FF so I do new in Chrome. the habit of 2 open pages. The key that I use. Had type of updates to 3.6.XX that I really liked. However support so that it stopped. I have 2 laptops that he has failed on this one. I got on the
-
I forgot the answer to the security question. How can I change/reset the question?
-
The user incorrect name/password when you attempt to receive messages on Windows Mail
For the past 2 years my email worked fine and now all of a sudden I am unable to pick up E-mail from 2 to 5 email accounts that I have set up on Windows Mail. The exact error message is: Account: * e-mail address is removed from the privacy *', serve
-
Could not start the command window!
When I type cmd in the run window, I get the following error dialog box. How can I solve this problem? Pls help me!