Windows 7 64 bit ultimate 30 min slow shudown

Similar Questions

• upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  my PC configuration is like below:

  Card mother Intel DH61WW
  Processor Core I3 2100 3.1 Ghz
  4 GB OF DDR3 RAM
  Seagate 1 TB SATA HARD drive
  OS: Microsoft Windows XP Professional SP3

  I run Windows 7 upgrade advisor in which some results below the incompatibilities:

  Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
  Unknown Intel we have not the compatibility information about this device.
  Intel 82579V Gigabit Network Connection
  Unknown Intel we have not the compatibility information about this device.
  Realtek High Definition Audio
  Realtek unknown we have not the compatibility information about this device.

  Here's my conceerns:

  What needs to be done to overcome the problems of incompatibility?
  Do I need to download new software files compatible for windows 7 and then install
  for example VLC media player, Skype, MySQL Server I am running
  or currently existing files are compatible to install with Windows 7?

  Would I be able to upgrade to windows 7 without any problem and safely?

  Could you please help me with the questions above?

  Please correct me with additional suggetions that I may have missed with.

  Looking forward to hear from you

  Thank you

  You understand that you will not be able to upgrade Windows XP to Windows 7?  He will have to do a clean install.

  The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)

  John

• Windows 7 64 bit ultimate - VPN L2TP does not

  Hello

  On a brand new with windows 7 64 bit ultimate laptop, I set up a VPN L2TP connection but it still fails with error 789.

  On the same network, I have an XP machine that connects to the remote gateway even.

  After a long search, here's what I did:

  1. Add a Dword AssumeUDPEncapsulationContextOnSendRuleregistry in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PolicyAgentand set it to 2 as shown in the MS KB - http://support.microsoft.com/kb/926179

  2. set correctly the two political generation of IPSEC Agent & key services

  3 reboot several times the PC

  4. to pass the local gateway connecting directly to the ISP

  Nothing works.

  On the XP machine, it runs immediately without problem: same gateway, local gateway, remote and local network, access, etc...

  Any help will be greatly welcome!

  Thank you.

  Have you tried to delete / create the VPN connection again?

• Windows 7 64 bit Ultimate - Explorer.exe freeze (AppCrash) constantly

  -Very well, Windows 64 bit Ultimate Edition here, clean install.

  I had this issue as well now (AppCrash Explorer.exe), BTW what does Microsoft on this one? You have a lot of reports about this in this thread, and if you do a search on Google also, so it is a GLOBAL problem. No showstopper bug, but doing the reputation of 'stable' of Windows 7 worth.

  It happens when:
  1. you copy / paste a single file or folder
  2 rename a file
  3 save a file with a text editor
  4 random

  Note: I'm a poweruser then please, do not answer telling me to "perform a clean boot" or simplistic answers as such.

  My configuration is very simple:
  ATI Radeon 2600 graphics card
  Intel Quad Core CPU
  Seagate hard drives
  Chipset Intel ICH7 (975 x)
  JMicron JMB36x controller

  Here's my question: according to all my research, this problem is especially on x 64 versions of Windows 7. And no, this isn't hardware related, because I had the same problem on 2 computers (fresh & clean).

  You want to settle this problem once and for all? Please let me know when you do.

  Change (an example of log events on this subject):
  The program explorer.exe version 6.1.7600.16404 ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.
  Process ID: 7f0
  Start time: 01caa2dfe0fa30d5
  End time: 32
  Application path: C:\Windows\explorer.exe
  Report ID: 07c07159-0edb-11df-a142-001e8c7e0499

  0000: 43 00 72 00 6F 00 73 00 C.r.o.s.
  0008: 73 00 2D 00 74 00 68 00 s. -.t.h.
  0010: 72 00 65 00 61 00 64 00 r.e.a.d.
  0018: 00 00 44 00 65 00 61 00... DEA
  0020: 64 00 6F 00 6 00 63 00 d.l.o.c.
  0028: 6 b 00 00 00 00 00 k...

  Thank you!

  Hello Zacchino ,

  It is always recommended that you take a backup of the registry before you edit the values, because incorrect modifications can cause strange behaviors and at worst could even damage your operating system completely, forcing you to reinstall Windows.

  We encourage you to try the registry changes, but only if you know what you're doing and if you do it carefully.

  The cause of this particular accident of Windows Explorer is related to SQM Client, which is part of the (CEIP) product improvement program. Under by default, where MachineThrottling is enabled in the registry, all calls to WinSqmStartSession in the ntdll.dll file will make Explorer crash, or Windows Installer installation to fail.

  So instead wait for a patch or an update from Microsoft, just remove and delete the MachineThrottling registry registry system entry. The MachineThrottling registry entry is located inside the following registry key: HKLM\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions

  * NOTE * If you don't know what you do within the registry, to stop and not continue.  Ask for help who knows what they are doing and what you can recover your registry database if a failure occurs.

  To make it easy, you can simply create your own small batch with the following command file;

  reg delete HKLM\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions /v MachineThrottling/f

  At this point, you can close the registry and right click on your file or icon, and you should be good to go.

  If that is not good so I think that you are only left with clean boot that Explorer.exe crashes usually are upshots of third party application conflicts and minimal boot is the only solution I can think.

  http://support.Microsoft.com/kb/929135

  Erwin

  I am not 62; I'm 16 with 46 years of experience... Think positive... Think Differnet

• Webcam Companion 3 on windows 7 32 bit, Compaq HP Mini netbook...?

  Hello

  I have Windows 7 32 bit on a Compaq Mini HP netbook.

  I tried to download a software for the site of HP drivers and downloads to allow me to take photos and videos with my laptop. Called Webcam Companion 3
  Have downloaded and installed very well it seemed (although he has not asked the laptop needs to be restarted, which I found strange)
  At first he does not correctly until I finally managed to download wmvcore.dll and then wmvasf.dll to allow it to open properly.
  Now, however it is said that she cannot access the webcam - which can be used by another application or not plugged in etc... It works fine when I open Skype however for example.
  And so I can't use this program to take pictures or video,.

  any ideas on what I should do?
  Any help much appreciated thanks!

  EM

  Hi Em,

  Follow the mentioned methods:

  Method 1:

  Perform the clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2:

  Run uninstall and reinstall correct and check for the issue.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  I hope that the above information is useful!

• HP Pavilion 15-e065tx drivers for windows 7 64 bit ultimate

  Hello

  I live in China and I bought this Hp laptop Pavilion 15-e065tx product number: F6C26PA #AB2, but I do not know why I can not find drivers for windows 7.

  I searched hp website, but they just drivers for windows 8 and 8.1.  I want drivers for windows 7 64 bit... Please help me...  I need this laptop in working with in three days... what should I do?

  and my laptop boot screen I think its called BIOS language is in Chinese... is it possible to change the language to English for the BIOS?

  Hello:

  1 install the Intel chipset driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+ins...

  2. install the Intel graphics driver and restart.

  64-bit:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3720&DwnldID=23639&ProductFamily=GRAP...

  3. download and install MS .NET Framework 4.0.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=17851

  4. download and install the latest amd catalyst driver beta.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

  Then you should be able to use the rest of the W7 x 64 drivers and software for this model except the audio.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK
  

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=6521374

  Audio: Accept the agreement, download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  As much as if/how to change the startup BIOS display language, I don't know.

• Dungeon running seat original problem on Windows 7 64 bit Ultimate edition

  Running Windows 7 ultimate, 64 bit. Currently to date with all patches from Windows Update and patches.

  Material:

  Case: Antec three hundred
  Power supply: Coolermaster Real Power M850
  Processor: Core i5 750 8 MB Cache Socket 1156
  CPU cooler: Hyper 212 Plus
  1 graphics card: Radeon HD5850 1 GB GDDR5 PCI-Express
  2 graphics card: Radeon HD5850 1 GB GDDR5 PCI-Express
  Memory: 8GB Corsair DDR3 1600 MHz C9 Twin3X
  Motherboard: MSI P55 - GD65 Socket 1156
  Drive hard GB OCZ Vertex Series SATA II 2.5
  Drive hard GB OCZ Vertex Series SATA II 2.5
  Optical drive 1: Blu - Ray LG GGC-H20L & HD-DVD ROM player

  Game: Dungeon Siege (original version)

  Question: Tried to install this for the first time since the upgrade to Windows 7/new machine. Inserted disc, run setup.exe. The installation program starts very well, the initial menu. As soon as you try to click on any button in the menu, the installer hangs and needs to be terminated from the Task Manager.

  Tried explicitly to 'run as administrator' and a wide variety of settings for compatibility mode. All give the same result - the installer crashes as soon as you click any button.

  Anyone has any ideas to fix this?

  Have you tried to install the DirectX updates? http://www.Microsoft.com/downloads/en/confirmation.aspx?familyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

• How to configure IIS 6 permanantaly in windows 7 64 bit ultimate sp 1?

  Hi all

  Hope fine, Mr President I'm on windows 7 ultimate 64 bit sp 1 operating system. and I install my web software to run in the local host. for this, I have to check the box in the IIS Manager 6 round Windows or turn off features to install / uninstall programs in Control Panel. When I checked my local host application der works very well. but whenever I am to stop or restart my system.  He spent off the coast and after that I'm not able to run my application in localhost.

  Mr President, I checked with some guyies techniques. tell them to execute the command and use services.msc and define iis as automatic

  When I go there it was set automatic here.

  and this problem still that I face.

  Please help me.

  Concerning

  Vikash kumar

  Hello

  You can view the query in Microsoft IIS Forum to get help.
  http://forums.IIS.NET/

• Software error LaserJet 100 CE866A on laptop Dell, Windows 7 64 bit Ultimate

  I have an undefined error when either self performing installation or new download from the site.

  I ran the installation with administrative privalages and turned off the firewall and antivirus also many malicious programs.

  I also have the same problem with an other Dell running the 32-bit version of windows 7.

  Installation is 85% installed and the error message occurs.

  The printer is a 220V version, not built for the United States.
  I installed a 220v Plug and the printer itself functions perfectly.

  If anyone has any suggestions or ideas, it would be much appreciated.

  Thank you.

  Sev Hello M.

  I understand you experience several problems when you try to install the full software features for your Laserjet 100.

  I did some research on your installation problem, and I found a HP document that should solve your problem. Please click here: fatal error 1601 Although this document refers to Windows XP, most of the steps can be applied to Windows 7.

  Also, you connect this printer wireless or USB?

  If you have any other questions please let me know and I'll be happy to help you.

  Ashley

• Windows 7 64 bit Ultimate - BSOD error: BAD_POOL_HEADER error checking code: 0x19, 0 x (22...

  Hello

  Just, I started my PC and got the BSOD:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 19
  BCP1: 0000000000000022
  BCP2: FFFFF8A004ED6000
  BCP3: 0000000000000001
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\123014-32307-01.dmp
  C:\Users\Admin\AppData\Local\Temp\WER-43025-0.SysData.XML

  Here are the 2 files above in a ZIP archive:

  https://onedrive.live.com/redir?RESID=68C615C9C1A0C11E%21303

  Thank you for your help.

  Thank you.

  I have not yet done, but have done the following:

  -Deletion of Symantec Endpoint Protection 11 and installed v12 instead.

  -Removal of Adobe Air

  -Skype upgrade to the latest version

  -Removal of the redundant Brother printer driver (I sold it some time ago).

  -Clean the event log: http://jacobytech.net/forum/index.php?topic=124.0

  -Ran Microsoft FixIt to remove the error from the event ID 10. not not help, therefore the manual vbs script method that worked:

  https://support.Microsoft.com/kb/2545227?WA=wsignin1.0

  So far, the event log appears to show almost no questions, he showed and the system runs a lot faster.

  I'll let it run this way for a while and continue debugging if the BSOD comes to visit again.

  Re-post here if everything changes.

  See you soon.

  P.S., Also used sysinternals autoruns to disable some redundant drivers that displays errors in Event Viewer, as they have been previously uninstalled already.

  EDIT January 6, 2015:

  One more thing I did, leaving the port USB3 Wifi USB dongle on a USB2 port, leaving all taken them vacant USB3.

  It has also solved the problem of verifier.exe giving the black screen.

  I suspect that the question was actually related to port USB3/pilot (turd).

• Bug in Windows 7 64 bit ultimate to-do bar: wrong icons, new icons open pinned

  Hello!

  I have an annoying problem:

  The taskbar has made the fallen on all programs, which I use all the time:
  Explore (File Explorer), Windows Live Messenger, Windows Live Mail, steam, Winamp and Mozilla Minefield (Firefox beta)

  The problem is that when I click on Steam, Winamp or minefield opened, that they pop up the new icon in the taskbar to open the window to the icon pinned to the taskbar.

  Steam is the most interesting: he sometimes appears with an icon wrong some of the games that I have steam: Left 4 Dead 2, GTA IV etc.

  I tried the method of re - pin the programs, but it did not work at all.

  Thanks in advance. :)

  I had the same problem
  All you have to do is to start your computer in Mode safe. To do this, start or restart your computer. When the screen with the Windows Logo that says "Starting Windows" below, press the F8 key. A screen will appear indicating "Reboot Advanced Options". Use the arrow keys to scroll to "Safe Mode" and press the Enter key.
  Once it has loaded up, go to the start menu and click on restart. All your icons should be back to normal once your computer starts up.

• My NVIDIA drivers causing windows 7 64-bit ultimate freeze on the windows logo

  My computer takes over until the windows logo starts to blink before the transition to the screen of the user chose and then just abdou.  I tried runing the difficulty of starting and it came as unable to repair, I tried to restore to the most recent restore point and had the same problem.  Has no problem starting in safe mode.

  I thought I had fixed, removed the display drivers and it boots perfectly
  Then I tried install the new NVIDIA driver and he got as much as the black screen with the mouse pointer, then screen off because no signal (not edge of speakers either)
  I tried NVIDIA Beta drivers and same problem
  Tried to leave the car computer to install the drivers and rebooted and got it works well, played Diablo 3 for 3 hours, left computer sitting there in the form of the characters (and so do nothing) is back and it has been turned off
  Problem of windows back logo on and freezing at the back, tried to install the beta drivers and got the same thing
  Boots fine in safe mode
  Boots fine when removing the drivers
  I tried all of the NVIDIA drivers I've had since March and it is beta (which is what I was running) for the current drivers and today
  I would have posted this to NVIDA but it forums are down
  It worked perfectly until yesterday
  I run a GTX 460

  Try the driver Nvidia 296.10. I have a GTX 460 SC and that this driver is stable.

• Windows 7 64 bit Ultimate - Explorer.exe has stopped working (AppCrash)

  It happens when I open the readers (problem happened in 2 of the readers). Windows exporer just stop working and restarting Explorer, but nothing worked I looked out in the net for the solution. the window displays:

  Problem event name: APPCRASH

  Application name: Explorer.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bc60d

  Fault Module name: ArcSpl.ax

  Fault Module Version: 2.4.2.45

  Timestamp of Module error: 448f57ee

  Exception code: c0000005

  Exception offset: 0000c28a

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: a7aa

  More information 2: a7aa91f17ea749d42a4de3b390fa5b3d

  More information 3:a7aa

  More information 4:a7aa91f17ea749d42a4de3b390fa5b3d

  Please, give suggestions so that I can fix my PC.

  Error to ArcSpl.ax as the failed Module points.  This module belongs to the ArcSoft MPEG splitter program.  The module goes back to Wed Jun 14 00:27:26 2006 and is probably not compatible with Win7.
  Please uninstall the ArcSoft program and see if that stops at the AppCrashes.

• 8180 cannot install complete features s-w & drivers on Sony Vaio VGN - NR32S Windows 7 (32 bit) Ultimate

  Software file download from hp.com and starts to install fine - but give up without error at the point of the "application of updates" message after the initial start - I can connect to the ok of the printer via a USB port and can be seen in the devices Printers & - but I want to install the complete functionality to get wireless working and use the HP Solution Center - I have other PC connected on the same network access to the same printer that works perfectly fine wirelesly and with the Solution Center installed ok.

  Thanks for any help!

  Best regards, RodBl

  Ho RodBl.

  First of all, be sure to disconnect all connected USB printer.

  Enter the control panel > devices and printers.

  Right click any icon of your printer list, then click on remove the device and restart your PC.

  Launch once installation, follow the steps until the license agreement is displayed.

  Click the link 2 - use of the Internet connection and make sure that both mark as No, thank you.

  Approve any screen, accept the license agreement and continue the installation.

  Please let me know of any changes,

  Shlomi

• Windows Vista 32 - bit Ultimate Edition

  Recently purchased and installed an Epson SX515W all-in-one printer.

  Kepp getting a pop-up card stating: "could not reconnect all network drives.

  While they inspected the status, MEMORYCARD (\\epson087ab0) (z) of a red cross next to it.

  Z: open, message reads as follows: "year error occurred while reconnecting Z:.» The network path was not found. This connection has not been restored. "

  However, while they inspected the performance of the printers, everything works well--in all aspects.

  I had to consult the technical support of Epson and was told that there was nothing they could do about the problem, because the printer works well. and suggested I contacted Microsoft.

  Is this something that Microsoft can solve?

  Thank you, Lindsay

  This printer has the facility for its reader of memory cards available from the computer. This seems to be the problem.

  Have you changed the way in which the printer is connected wireless USB? If it's on a network, have you changed the network somehow.

  Here you can find additional documents:

  http://www.Epson.co.UK/store/printers-and-all-in-ones/Epson-Stylus-SX515W/drivers-support

  To stop messages, you can use this procedure:

  1. Click on the computer
  2. Press Alt to reveal the Tools menu
  3. Click on the Tools menu
  4. Click disconnect a network drive
  5. Click the Z: drive
  6. Click OK