Windows 7 and PhotoSmart A826

Similar Questions

• Photosmart 6520: windows 10 and photosmart 6520e

  Y at - it an update of the pilot of the aircraft photosmart 6520 for Windows 10.

  I would like to download the driver before upgrading the OS.

  When I try to download a driver from your support page (which seems to be a pkg to win 8), it won't download - unless I have install the GWP of solution of support I don't want to do.

  I want just the pkg of drivers and software

  Hello @maxie987,

  Thanks for posting in the Forums of HP.

  I want to help you in your investigation of Windows 10 drivers for e-all-in-one printer, HP Photosmart 6520.

  Windows 10 has the same functions of basic Windows 8.1 operating system, so you can actually download and install the drivers for your system Windows 10 8.1 Windows.

  Please note : If your device had fully supported (not just basic printing or scanning) in Windows 7 or 8 then your device is supported, but may not immediately appear on hp.com for Windows 10: Please download Win8.1 drivers and use them (they have been tested and have worked with Win10)

  -Source

  If you are having problems with the installation package, try to download and run the HP printer installation wizard and it will download the correct software for you.

  I hope this helps!

  

• WINDOWS 7 AND PHOTOSMART C7280

  I have the trial version of windows 7 build 7100 and the software for the photosmart c7280 won't work for me. is that what you can advise?

  Build 7100 is not supported. The number of supported version is 7600, which was the official version on 22 October.

• Cannot print with Windows 7 and Photosmart 7350

  Hello. Recently, I converted my laptop to Windows 7 Home Premium OS. I have no problem printing to work with this computer of our HP LaserJet but when I enter the problem starts. I have a wireless home network with my Photosmart 7350 connected to my desktop computer that is still running XP. The wizard sees the printer and adds but cannot print a test page. He says that it is waiting, then the print job disappears. I downloaded the Vista driver for the printer. When I run the troubleshooter, it cannot determine the problem. No surprise as convenience stores rarely did help. I got around the problem by sending documents to the desktop so far and then print it from there, but it gets old. Any ideas?

  Please install the printer on Windows 7 by using the following steps:

  http://support.HP.com/us-en/document/c01796821

• Ask for help with windows 7 and Photosmart P1100

  I know its an older printer and they are not the drivers up to date for her, but is it all work around? Is there some drivers out there who will at least give me back functions basic printing? I can't buy a new printer when it still works perfectly and print very well. Thank you for your time, any information is appreciated.

  Vyper says:
  

  These are not available in the list.

  If they do not show go to add a printer and when happens the list select "Windows Update".  It will take several minutes without indication of progress, but once she has completed there will be many more printers including Deskjet 970 csi.

• updated to correct driver for windows 7 and photosmart c6280 all-in-one

  I bought the new computer with windows 7.  Tried to download recommended driver [a/o 02 Netwired_Full_Win_WW_130_140.exe.], but got the message that it is not commonly downloaded and it may harm your computer is not sure as what to do now?  Bought printer Jan 2008

  Thanks for the info.  I found myself just try the download again and it went through smoothly and works!  I used the HP website for support.

• all-in-one photosmart B110a: windows 10 and b110a

  I had my B110 series all in one printer works fine for over a year, then I updated to Windows 10 and he stopped scanning. So I tried to remove and reinstall all the HP programs, tried to hook up with cable (as well as wireless), tried Hp trouble shooters and doctors and no matter what I do, the printer setup will crash towards the end of the process and say "fatal error" and "MSI.netdevicemanager40". Someone please help.

  Hello @Jenecessary,

  Welcome to the Forums of HP Support! I see that you have recently upgraded to Windows 10 operating system and you stumbled upon a matter of scanning with your HP Photosmart B110a. You have uninstalled the software, now, when you try to reinstall the printer, you get a MSI error message.

  Please, try disabling your firewall and running the installation to see if it allows you to install, if this does not work try a clean boot and re run the HP printer install wizard for Windows , it was created to help Windows 7, Windows 8, Windows 8.1 and 10 users to download and install the latest and most appropriate HP software solution for their HP printer.

  If you still run into installation errors, continue here: a "Fatal Error" (error MSI) is displayed on the computer while installing the HP Windows software

  Please let me know the results, I'll watch for your reply.

  Thank you

• Windows Fax and Scan cannot detect Photosmart C4580 all-in-1 scanner connected to the wireless network

  I have no problem printing or scanning when I connect my C4500 to PC via USB.  When connected via my home wireless router I can print OK but can not scan - it's the same for other users and computers.  Windows Fax and Scan gives me the message 'no scanner found. '  I need to work so that all users on my netwrok home can share the scanner.  I use Windows 7 64-bit.

  Thanks Travis_C (HP).  I actually found the solution just before receiving your answer!  I discovered that, although the Solution Center says it would uninstall the existing files before allowing me to reinstall with the latest version downloaded, it didn't remove all the files.  I only discovered this because the new facility has not taken me through the whole fresh installation procedure, he simply asked me what additional features I wanted to install and asked me if I wanted a local printer or network etc.

  I thought that there must be a mistake or problem with whatever existing files were left and the new facility would not correct it.  So I used the control panel to uninstall the existing files, and I made sure that everything was gone.  I then used the last download to reinstall, this time through the new correct installation procedure, and everything now works perfectly.

  With this method I always had a problem on another PC, giving me the same problem I had before.  I realized that this was due to a USB dongle connected to the PC to a wireless keyboard that seems to affect the installation.  When I removed the dongle installation worked again perfectly, and I now have full printing and scanning ability on all PCs.

  I think the installer for this printer wireless (and perhaps others?) should be updated to solve the problem, and also the center of Solution must be fixed to ensure that if you uninstall the software it should not leave anything.

• Photosmart 5510: my version of windows is replaced by windows 10 and my hp printer has been disconnected.

  My version of windows is replaced by windows 10 and my hp printer has been disconnected. Please help me to connect without disc

  The problem is not yet ressolved. The printer cannot connect to the wireless router.

  Test report says wireless network name (SSID) found "Fail".

• Software Windows 7 and HP Image Zone

  I have a new Pavilion s5212y w/Windows 7 and a HP printer Photosmart 8450 that comes with the HP Image Zone software for image editing.  The software is not supported by Windows 7, will not be installed (tells me to upgrade op - sys).  Is there a work around for this or the software will be compatible with the new system?  Don't get me wrong, the printer works well, it's just that I can't use the software to edit photos before printing.  Thank you.

  I have HP Image Zone to work with Windows 7.

  1 login as administrator

  2. load installation CD.  Find setup.exe, do a right click, select troubleshoot compatibility.  Accept the XP mode.

  3. start the program.

  4. it takes some time to install the program.  Be patient.

  5 ignore all messages that the program may not have install correctly.

  6. once the program is loaded, click Next and save the settings.  Ingore the error messages.

  Once the program is loaded, you can copy the shortcut (s) of the Office of the administrator to other users or just create a new shortcut.

  Hope that works for everyone.

• Desktop Windows 7 and windows 8 computer connected to the router

  I have a windows 7 64 bit desktop and a photosmart connected 7510 e wireless printer, although the office is wired, I bought your desktop windows 8 and connected to my router and set up my e-mail account and it did pick up my printer and can print but not scan or EFax, now I get a message from 1625 and cannot print from it.

  I tried to download the print and the analysis of web site of HP Assistant, but my PC froze.

  What should I run the disc or put up a home group, not worth to be able to E Fax or scan to email with it, simply print as he did before.

  Also on my windows 7, I can connect to connected HP and my printer appears ok, when I press the icon for the printer for Eprint it shows my email address of HP but when I press the Fax icon it doesn't say ANY NETWORK. Cloud services set up a static IP address for me last year as whenever we had a power outage I lost my connection to my printer. If anyone can help, I'd appreciate it.

  Emma22, welcome to the forum.

  Here are the 8 Win driver for the printer.  Their installation should correct your problem.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• How to re - assign default windows fax and picture viewer?

  I chose the HP Photosmart first as my default for the photos - I want to go back to windows fax and picture display. Can someone help me?

  Never mind... I figured it out... whoohoooo!

  Hi TDPurdom,
   
  This is good news! Glad to hear that the problem is now solved. To make any type of file to open with a particular program, set this program as default.
  For more information, see:
  How to change or choose the program that starts when you double-click a file in Windows XP
   
  Email us if you have any other questions in the future.

• After that my virus clean my printer does not work I have windows xp and my printer Deskjet F 300 said

  After that a virus clean my printer HP Deskjet F 300 quit working they installed Windows XP from Windows 2000 and I can't make it work help

  "they have installed?  You had somebody "clean" your computer and they have also installed Windows XP (you used to have Windows 2000)?

  The first thing you need to do is to determine if 'they' a legitimate version of Windows XP installed.  Download and run the MGADiag tool.  If the tool does not report that Windows is "genuine", take back it the computer and demand that 'they' install an authentic version, paid Windows XP.  While they are at it, tell them to install a driver for your HP Deskjet F300.

  If you do not have a genuine version of Windows XP, then go to this page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=1128298
  You have several choices to this page.

  • The top line, which only says: 'Pilot' is the complete set of software including software HP's Photosmart printer drivers and the scanner of your Deskjet.  As the HP notes, this is a very large download, so if you want this package, you must have a high-speed Internet connection or order the CD.
  • The second line, which says "Driver - Product Installation software" includes the basic print and scan drivers.  HP has said, "not all product features are supported with this installation package."  I don't know what "features" are not supported if you choose this option.
  • It should not necessary the "Patch" because or the other of the first two downloads is dated after the patch and so should be included.  After things are installed, you can download and install the most recent of the 3 "Updates".

  When you wrote that the printer "will not work" after a new installation of Windows XP, I assume that the printer is not installed at all.  Just in case, however, previously, you use the package that you download from HP, follow the instructions here to clean all traces of a failed attempt to install it.  (Note: remember "Step 4".)  "Step 6" refers to the directions outlined in the upper part of this post.)

• After uninstalling printer Windows Installer and Microsoft Office error "this update package not could be opened"

  Original title: Windows Installer and Microsoft Office problems after you have uninstalled the printer

  I tried to install more than one printer, a HP Photosmart C4280 by downloading the drivers and updates on the HP site. I uninstalled the printer after it failed to scan a document and I had no more use for it. Then the trouble started. When I tried to open some programs (iTunes, Skype, etc.) for the first time after the uninstall of the printer, a window "Windows Installer" popped up. After you have configured Windows Installer, the program would open normally. However, when I try to open any Microsoft Office programs (Word, Excel, etc.), Windows Installer appears, but it turns into a window that reads:
  "This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package. »

  Microsoft Office programs are open at all, and I desperately need my programs of Microsoft Office to work even faster. I would appreciate it if Windows Installer will stop trying to configure when I open a program also. Can someone help me please?

  Hi Jennifer7,

  It is sufficient to indicate the complete error message you receive.

  Method 1: To solve the problem of Windows Installer, follow the steps

  http://support.Microsoft.com/kb/2438651#reso1

  Method 2: Follow the steps mentioned in the article below which addresses Office question

  You receive an error message when you try to install or run an Office program: "this patch package could not be opened" or "" the installation source for the product is not available".

  http://support.Microsoft.com/kb/932857

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If the question of the Office has not changed, you can post your request in the Office forums for more specialized help.

  Office forums

  http://answers.Microsoft.com/en-us/Office/Forum/office_install?page=1

• HP Photosmart A826 is 100% Virgin photos printing.

  HP Photosmart A826 is 100% Virgin photos printing. Ink said 1/2 left and touch the bottom of the ink cartridge gets ink on my finger. So there has got to be something else going on here. It has not been used for awhile. I tried to clean the cartridge but no dice.

  In addition, agligning heads is throwing an error but it says that "check documentation.

  S/N {removed privacy}

  Product: Q8546A

  Generally, this is caused by a faulty cartridge. There are a few things that you can try before it's even though. The document following the link will guide you through the steps. If this does not work, replace the cartridge. If it still does not respond, you may need to get a new printer.

  http://goo.GL/0CQQs