Windows 7 backup system Image - 0x8078012D error Code - fails to complete system image backup?

Similar Questions

• I get the 0x8078012D error code when I run the Windows backup on an external hard drive.

  I get the 0x8078012D error code when I run the Windows backup on an external hard drive.  I have Windows 7 Professional.  That suggests this error code is the problem and how can I solve the problem?

  For people who read this thread, I offer the following information.  I solved the problem by noticing that the problem could have been caused, when the system image is created.  So I did a backup without creating the system image and backup is complete without error.

  Then I used the backup program to create a system image.  This time error (0x8007045D) was displayed.   The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »

  So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error.  It took about an hour to run the program.  Now, the image of the system and the backup of data file work again.

  So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D).  So if you get the first error code you can search for fixes for the second error code fix the root cause.

• 0x8078012D error code when you back up the new pc for external hard drive

  I have a brand new HP Pavilion Windows 7 Home Premium desktop/8 GB memory/1 terabyte hard drive. Just hung up 3 days ago, and after installing my software, attempted to perform a full backup with the image of a brand new Toshiba Canvio 500 GB external hard drive. I get 0x8078012D error code, without interruption.  I did a check on the external hard drive disk, and it was good. I did a check for virus on the external hard drive, and that was good. I have triple checked the settings for backup and they are as I want them to be. -What is the Toshiba external hard drive or my bad nine HP desktop computer?  I had to call HP tech support yesterday as 2 programs, I had already installed has stopped working, but also Java and Adobe Flash Player. HP technical support was not only bad in his work, but right has supported up and hard with me and talked to me. I told her to give me control of my computer and down the phone that I reported him. He wrecked settings that I had, I did a system restore on the eve of the appellant, which was day 2 of owning the new pc. Now everything works as it was and I think that the 2 programs stopped working due to a Microsoft update that I had done that day. I don't have re-uploaded the 6 latest updates from MS and pc seems to work very well, but I can still save on the Toshiba Canvio external hard drive. Last resort, I reformatted the Toshiba Canvio to NTFS, even if it has already formatted to. Still can not make a backup on the external drive. I don't know what to do. Return the pc?  Return the Toshiba Canvio?  I'm in debt $650 for these 2 pieces of metal. Help please!

  Hello

  The error would have occurred if the services related to backup Windows could have been disabled. This can also occur due to other security software installed on the computer.

  Y at - it a third-party security software installed on the computer?

  I suggest you to check if the services are running and in manual mode.

  You can follow the methods:

  Method 1:

  Follow the steps to check if services are running. If not, restart them and check if that helps:

  (a) click Start.

  (b) type Services in the start search.

  (c) in the Services window, search for the shadow copy volume.

  (d) right click on the Service.

  (e) click Properties.

  (f) select Start on ManualType.

  (g) click OK.

  (h) now repeat the same steps for Windows backup service as well.

  Check if you find the same error trying to save using the hard disk. If Yes, proceed to method 2.

  Method 2:

  I suggest to temporarily disable the security software installed on the computer and check if it helps. Check out the link to do so:

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Important note: security software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  It will be useful.

  Just reply to us with the results. We will be happy to help you.

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• I am trying to update Windows and I get the 0x080072F8F error code

  I'm trying to update Windows and I get the 0x80072F8F error code.  I tried to set the time, but that did not help.  I unchecked the revocation of the certificate and that did not help.  I can't go beyond a step at the entrance to .dll.  The one on the list has worked but when I tried as wintrust.dll he asks me what program to use to open this and others.  I even downloaded and bought RegCurePro, but which is not made and will ask for my money back because he did what he was supposed to.  Can I PLEASE get help on this?

  How many copies of Windows that you downloaded?

  First of all, I would like to inform you that only one copy of Windows can be installed and activated on a single computer.

  Follow the steps below to solve the problem;

  
  Method 1: Verify that your Internet connection is working

  This method is rated: moderately easy.

  To run this method, follow these steps:

  (a) click Start and then click Help and Support.
  (b) in the search help box or in the search online help box, type troubleshoot network and Internet connection problems, and then click Search Help.
  (c) in the list of topics, click on solve the network and Internet connection problems.
  (d) click the link that best describes the problem you are experiencing.
  (e) follow the suggestions to solve the problem you are experiencing.
  (f) when you are done, follow the steps in method B to reactivate Windows 7.

  If this method does not work for you, go to method 2.

  
  Method 2: Activate Windows 7 using the automated telephone system

  This method is rated: easy.

  To run this method, follow these steps:

  (a) click Start, and then click computer.
  (b) click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation section.
  (c) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (d) click on show me other ways to activate.
  (e) click on use the automated telephone and then follow the instructions that are provided.

  
  Method 3:

  Reset your TCP/IP stack

  (a) click Start

  (b) type in the box search command

  (c) right click command and select run as administrator

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

• I can't send or receive emails using Windows Live Mail. Receive the error code 4402. I can send and receive email on my hotmail account.

  I can't send or receive emails from Windows Live Mail. Receive the error code 4402. I can send and receive emails from my Windows Live hotmail account. In Windows Live Mail, it also says my server is an http / imap server. Can it be replaced by a pop3 server, so, how? Thank you

  Well, took me a few hours and without the help of a person (TIP!), I've fixed it. Remove the live mail client account and re-apply / restore the account. Solves what seems to be a sync error. -19 October 2011

• Windows Update KB948465 8024200d error code failed.

  Windows Update KB948465 8024200d error code failed.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 126, specified package Management Instrumentation error code is not found.

  Try to start the Security Center I found that Windows Management Instrumentation has been disabled.  When I try to start Windows Management Instrumentation, I received the error code 126, specified module could not be found. Any ideas on how to fix?

  Hello jrk_954,

  Download the the WMI - Version 2.0 diagnostic utility. It will be
  help diagnose and repair problems with the WMI service.

  http://www.Microsoft.com/downloads/en/details.aspx?familyid=D7BA3CD6-18D1-4D05-B11E-4C64192AE97D&displaylang=en

  Let us know if that helps.

  Marilyn

• Windows live gives me a 0x80040a15 error code when I want to open a picture

  Windows live gives me a 0x80040a15 error code when I want to open a picture

  Windows live gives me a 0x80040a15 error code when I want to open a picture

  =================================
  Maybe the exclusive database is corrupted.

  Read the following article.

  (944221) freezes Windows Live Photo Gallery
  or does not start
  http://support.Microsoft.com/kb/944221/en-us
  (according to version, database can be
  Pictures.PD4, Pictures.pd5 or Pictures.pd6)

  Rename the Pictures.OLD file will force Live Photo
  Gallery to create a new database on the next launch file.

  Know that the gallery will be as it was the first time that you
  open and some metadata and labels may be lost.

• Why can't sign in to windows live messenger? Get the error code 80040200

  Why can't sign in to windows live messenger? Get the error code 80040200

  You will find support for Windows Live Messenger in these Windows Live help forums: http://windowslivehelp.com/forums.aspx?productid=2>

  The current time and the date now to (UTC/GMT)

  17:39

  Tuesday, October 23, 2012
  Standard time + 0000 UTC

• Cannot install Service Pack 4 (KB2463320), windows update has encountered an unknown error, Code 2B 33

  Cannot install Service Pack 4 (KB2463320), windows update has encountered an unknown error, Code 2B 33

  SQL 2005?

  Download and install from here... http://www.Microsoft.com/en-US/Download/details.aspx?ID=7218

• trying to update my windows but it shows the found error Code 80070017

  I'm trying to update my windows but it shows the found error Code 80070017, I installed Microsoft fixit center to solve the problem, but the problem persists, in addition to this Windows Secuirty Center service is off please guide me how to do?

  Hello

  1. what day you're talking about?

  2. what Microsoft fixit you talking?

  3. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/956704

• A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

  A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  Hope the information is useful.

• Windows Live Photo Gallery causes the error Code: 0 x 80010108

  I have a desktop XPS 8500 running Windows 7.  Love it except for one thing: Windows Live Photo Gallery causes the error Code: 0 x 80010108.  Yes, I x it down and go ahead and use my computer but like it to stop.  I have google code and there are a number of fixes called there for him - even though they claim.  But I was reluctant to download anything on sites I don't necessarily trust OR conform to change my registry to fix it.  Can someone recommend a cure to my problem?  I have confidence in this forum for more than 12 years and feel that you will not recommend something that might get me in trouble.

  Thank you

  Bessie

  Hi Bessie,

  Thanks for the reply. I suggest you to uninstall Windows Live Essentials from the computer and update to the latest version. You can download it from the link http://bit.ly/GQ9tPI . Please disconnect all the external devices connected to the computer (printers, external hard drives, flash drives) and do not have any CD/DVD in the drive while following the steps.

  Answer please if you have any questions.

• Canon MP250 will not scan with Windows 7. 2,155,2 error code

  Canon MP250 will not scan with Windows 7. 2,155,2 error code

  This Canon MP250 printer/scanner never worked well with Windows 7 and 8 for example. Printing would just hang out and print only the laptop restarts. Scanning has been difficult but eventually worked. Now, the scanner does not at all.

  This is the message that comes with the 2,155,2 Error Code:

  Cannot communicate with the scanner. Cable may be disconnected or scanner may be turned off. Check the status. Scanner driver will be closed.

  They aren't joking about the closing of the scanner driver. I didn't know that the closure would be permanent.

  Also, I get the following message when I plug in the printer:

  USB device not recognized.

  It appears to malfunction. Windows accepts the USB port only when I unplug the power cord of the printer and wait half a minute before plugging new.

  Canon told me I need to download the driver software of its UK site and updated. Fact that several times, also uninstalled and reinstalled the original software and the driver supplied with the disc.

  Software will download, but not install. Guard me with the message: do you want this program to make changes to your computer?

  I tried to install the updated driver manually, because Windows does not find a driver for this printer.

  It drives me crazy, slowly. Can anyone help?

  Sorry for the repetitions of my question. I'm new here and I'll try to find the right forum.

  Instead, please answer your original on the subject (this one) thread.

  It's his original-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-will-not-communicate-with-canon-mp250/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81 thread (June 8, 2013)

  @BryanBeeMM => Please post a follow-up while answers to your real in order to avoid even greater confusion original thread => http://answers.microsoft.com/thread/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81

  Thank you.