Windows 7 blue screen - dump equal or lower IRQL

Similar Questions

• Windows 7 blue screen 'Dumping physical memory to disk'

  Hi, my PC is this bluescreen every now and then. He begins to freezes, then comes the bluscreen and closes.

  Here's my dump files: https://onedrive.live.com/redir?resid=87AD51B9CA7B8C2E%21443

  I hope this helps.

  Ty

  DD

  They are called BCC124 and are related to the material.  As this points to Genuine Intel I would start by running the CPU stress test

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.

  
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

• Windows 7 blue screen... BCCode: a

  I was recently watching a movie on my laptop when suddenly "blue-screen" appeared with error codes. My laptop then restarted and it happened again. I then waited so he can restart once again, however, I started windows in safe mode and then rebooted the system, and it came perfectly. After you find the error Although the center of the action, I found this information.

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 2057

  Additional information about the problem
  BCCode: a
  BCP1: FFFFFA8015CAF010
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF80002B8BA57
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1
  Bucket ID: X64_0xA_nt! MiReleaseConfirmedPageFileSpace + 87
  Information about the server: 1d3b1813-1d92-44ea-8f24-3e4ca7b3dac8

  I would really appreciate any information on this subject and how to work around this problem in the future. Thank you for any feedback.

  Hello

  References to Vista also apply to Windows 7.

  Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates -
  updates to the pilot), or add key software lately? Drivers and antivirus/antispyware/security
  the products are also suspect likely. Next message is my generic driver updated methods to use when
  you get to this part of the resolution of the problems.

  BCCode: a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after installing a faulty device driver,
  BIOS or system service.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be
  caused by a device driver, system service, a virus scanner, or backup tool which is not compatible
  with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the Windows Advanced Options menu, select last known good Configuration .
  4. This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus
  Scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or
  2. the driver that caused the error.
  3. Try disabling the cache in memory of the BIOS.
  4. Run the diagnostics of material provided by the manufacturer of the system, in particular the memory
  5. scanner. For more information about these procedures, see the manual of your computer.
  6. Make sure that the latest Service Pack is installed.
  7. If your system has interface cards (SCSI) small computer system, contact the adapter
  8. manufacturer for updates of Windows drivers. Try to disable sync negotiation in the SCSI
  9. BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  10. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port.
  11. Also, check each IDE device to the right setting master/slave/stand alone. Try
  12. remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and all the
  devices are listed in the list of the products tested Microsoft Windows market.

  BCCode: a 0x0000000A<-- read="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that causes
  It crashing.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  This is my generic troubleshooting tool and can probably give a bit more specific when help
  you give the ICC codes.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Last night, my laptop that runs windows xp blue screened and says something about the queue

  original title: help solve a mistake, please on windows xp

  Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:

  SC stop cisvc

  SC start cisvc

  Can someone tell me please how to do this?  I think I know, but I'm really not sure so please help... Thank you

  It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.

  However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.

  If you don't see an icon for the printer that you think should be there, you need to fix this.  On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.

  If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post.  However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.

  Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless.  If you want to change your encryption, you would start by changing the configuration of your router from Verizon.  You should be able to find detailed instructions on the Verizon support site.  I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm

• Windows xp blue screen stop: 00000024

  Title: original windows xp blue screen

  had a blue screen with stop:

  Hi steveshepherd,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what happens when you insert the Windows XP CD?

  You can follow the steps provided by Karena R in the link below, which relate to this issue

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/blue-screen-stop-error-0x00000024-while-booting/196033b0-fbe9-45dd-abbf-889291d0d133

  Kind regards

  Ajay K

• Windows 7 blue screen problems

  Windows 7 blue screen problems is so frustrating. The blue screen of death or BSOD because it is often called. I need help...

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
  so time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
  Details of all application crashes occurred in your system. The information of the plant are extracted
  the .wer files created by the Windows Error Reporting (WER) of exploitation component
  system each time that an accident has occurred. AppCrashView also allows you to easily record the
  list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 blue screen memory dump

  My computer laptop windows 7 has just started gives me an error dump BSOD and memory.  It happened 2 x 5/29 & 6/5.  Only thing I can think of that has been done is installed Photo shop Elements 9 29/5.  Both times I got the blue screen I was using IE.  It appears if fast and not a memory dump, and then restarts, so I don't have the error code?  Is someone can you please help me solve this new problem.  I tried to read some of the previous ones, but did not quite understand exactly what I have to do to get someone to look at my logs to solve this problem.

  The minidump files showed a DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) stop error caused by the KmxAMRT.sys:

  BUCKET_ID: X64_0xD1_KmxAMRT+ 10748

  The KmxAMRT.sys, which is dated October 27, 2011, is a driver of CA Antivirus.

  What I would say is to uninstall Antivirus CA and see if the blue screen errors to fix.

  After have REINSTALL CA anti-virus using the most recent version or go with other security such as Microsoft Security Essentials software.

• Windows 7 blue screen 0 x 000000116 with nvlddmkm.sys

  Microsoft (R) Windows debug 6.12.0002.633 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.
  
  Loading dump file [D:\MEMORY. DMP]
  The mini kernel dump file: only registers and the trace of the stack are available
  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Could not load the ntoskrnl.exe, 0n2 error Win32 image
  WARNING: Unable to verify timestamp for ntoskrnl.exe
  ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  Computer name:
  Core = 0 x 84403000 PsLoadedModuleList = 0x8454d850
  The debugging session: 12:52:48.258 Wed Aug 17 2016 (UTC + 08:00)
  System Uptime: 0 days 0:00:35.209
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Could not load the ntoskrnl.exe, 0n2 error Win32 image
  WARNING: Unable to verify timestamp for ntoskrnl.exe
  ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
  Loading the kernel symbols
  ...............................................................
  ..................................................
  Loading user symbols
  Mini Kernel Dump does not contain the list of discharged drivers
  Failed to load image dxgkrnl.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for dxgkrnl.sys
  ERROR: Module load completed but symbols can be loaded for dxgkrnl.sys
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  Use! analyze - v to obtain detailed debugging information.
  Error checking 117, {88 99008, 9153fed8, 0, 0}
  WARNING: Unable to verify timestamp for mssmbios.sys
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  WARNING: Unable to verify timestamp for dxgmms1.sys
  ERROR: Module load completed but symbols can be loaded for dxgmms1.sys
  
  The kernel symbols are FALSE. Correct symbols to do the analysis.
  *************************************************************************
  
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  WARNING: Unable to verify timestamp for nvlddmkm.sys
  ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  Probably caused by: nvlddmkm.sys (nvlddmkm + 13eed8)
  Follow-up: MachineOwner
  ---------
  1: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  VIDEO_TDR_TIMEOUT_DETECTED (117)
  The display driver did not timely.
  (This code can never be used for actual error checking).
  Arguments:
  Arg1: 88 99008, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
  Arg2: 9153fed8, the pointer in the responsible device driver module (e.g. owner tag).
  Arg3: 00000000, the secondary driver specific bucketing key.
  Arg4: 00000000, optional internal context data dependent.
  Debugging information:
  ------------------
  The kernel symbols are FALSE. Correct symbols to do the analysis.
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  ADDITIONAL_DEBUG_TEXT:
  Use '! findthebuild' command to search for the generation of target information.
  If the build information is available, run '! findthebuild s; .reload ' to set the symbol path and of loading symbols.
  FAULTING_MODULE: 84403000 nt
  DEBUG_FLR_IMAGE_TIMESTAMP: 4fb2071b
  FAULTING_IP:
  nvlddmkm + 13eed8
  9153fed8?              ???
  DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_TIMEOUT
  TAG_NOT_DEFINED_202b: * unknown tag in the list analysis 202 b
  
  BUGCHECK_STR: 0 X 117
  CURRENT_IRQL: 0
  STACK_TEXT:
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  8eddcb30 91f765b8 9153fed8 00000000 88 69008 dxgkrnl + 0x81a5e
  8eddcb9c 91f7597e 00000000 00000001 88 99008 dxgkrnl + 0x825b8
  8eddcbbc 91fb192c 00000000 00000102 88 69008 dxgkrnl + 0x8197e
  8eddcc34 91fdb944 fffffcfb 00000000 0000075b dxgmms1 + 0x692c
  8eddcc5c 91fdc065 00000000 00000000 00000000 dxgmms1 + 0 x 30944
  8eddcc98 91fb88f0 8eddcc90 8443a50e 88 69008 dxgmms1 + 0 x 31065
  8eddcd28 91fdd3c9 69008 8443a50e 69008 dxgmms1 88 88 + 0xd8f0
  8eddcd3c 91fdd485 69008 00000000 88c09d48 dxgmms1 88 + 0x323c9
  88 69008 abfb2822 00000000 dxgmms1 8460cf5e 8eddcd50 + 0 x 32485
  8eddcd90 844b 4219 91fdd406 69008 00000000 nt 88 + 0x209f5e
  00000000 00000000 00000000 00000000 00000000 nt + 0xb1219
  
  STACK_COMMAND: .bugcheck; Ko
  FOLLOWUP_IP:
  nvlddmkm + 13eed8
  
  9153fed8?              ???
  SYMBOL_NAME: nvlddmkm + 13eed8
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: nvlddmkm
  Nom_image: nvlddmkm.sys
  BUCKET_ID: WRONG_SYMBOLS
  Follow-up: MachineOwner
  ---------
  1: kd > g
  ^ No executable debuggees error in 'g '.

  Hello

  nvlddmkm.sys

  Seems Nvidia video drivers.

  Check with Nvidia Support, their drivers and documentation online and ask questions in the forums about known problems. Update video drivers. If there are no more recent ones it may be necessary to go back to an older stable version.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  --------------------------------------------------------------------------------------------------

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  We can analyze the minidumps if you make it available from the OneDrive or another file sharing of sites (such as MediaFire). If you have problems downloading the minidumps copy them on the desktop or the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  =========================================================

  BCCode: 117 0 x 00000117

  BCCode: 117 0 x 00000117<-- read="" this="">
  * 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-

  BCCode: 117 0 x 00000117<-- read="" this="">
  https://msdn.Microsoft.com/en-us/library/ff557271%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  Update the video driver - also look for the BIOS and the chipset drivers of low level from the system (motherboard manufacturer of custom systems) manufacturer.

  --------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• My computer randomly gave me a blue screen, the error message "DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys).

  Original title: driver error

  They just showed me an error on my computer. I am currently running Windows 8. I was in the middle of games on Steam and my computer randomly gave me a blue screen. He told me that "DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys). It restarted and now I'm on that's fine, but I was wondering if there is anything I can do to prevent and what should I do to remove if it's going to be a recurring problem. Thank you.

  Here is a list of the help page instructions:
  «' ' ' Exact error message: DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys)»»» "
  -Your program and Version: don't know what to put here.
  -Your operating system and Version Windows 8
  -Your browser and the Version of Google Chrome Version 28.0.1500.72 m
  -All soft/hardware you have recently installed or removed - None.
  -Any recent changes that have been made to the system - None.
  -What you did to solve the problem of Google there as the error message recommended, read a few results, thought I would ask here.
  Specification of the computer if necessary:
  HP - Sleekbook 15.6 ENVY "
  AMD - processor A10
  -DDR3 SDRAM
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are if you are unsure if you are, you are not) a

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.
  
  
  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  You can learn more about BSOD here
  
  
  
  
  Team Zigzag3143.com  

• Windows 7 blue screen, sleep mode monitor.

  Hello, I have a hp series p6000 desktop product # BT503AA #ABA. And I get a blue screen crash dump and keep saying my monitor goes into sleep mode. Help, please. I swiched monitors and the same results. computer is used for family only, no company. It is running do not install windows 64-bit and some windows updates.

  Really sounds like a software problem, but could be a hard drive problem.

  Boot tapping F10 select your hard drive, then SMART support, run a short self-test. If it goes, try to run a last good known Configuration.

  Start type F8 and select last good Configuration know. This will automatically return the system for when it was working properly.

  Let me know the result to your convience earlier.

• Windows Vista blue screen RANDOM (-_-)

  I was working at an individual (who will remain nameless) with their computer. Suddenly, unexpectedly, the screen went away and came back with a blue screen! You know where it says 'PAGED_FAULT_IN_NONPAGED_AREA '? Nothing has been shown here, and no file name is specified. He did a memory dump, and I still have to study. It is an old system used for web browsing only...

  Compaq Persario "unknown model)

  Windows Vista Edition Home Premium Service Pack 2

  Desktop Intel Pentium processor clocked at 1.8 GHz

  1 GB RAM (DDR-unknown)

  320 (unknown RPM) HARD drive

  It's probably a Paged fault although it has not been specified. RAM usage was about 85-90% at the time of the accident.

  See you soon!

  The first was inconclusive, and that's why I asked for a second.

• Windows 7 blue screen: DRIVER_POWER_STATE_FAILURE STOP: 0x0000009f (0 x 00000003,... ntkrnlpa.exe)

  Hi all

  I got a blue screen today with my Windows 7 which is something disappointing and I don't want to do it again, can someone check the dump for me file and tell me what is the cause?

  ********************************************************************************
  The problem seems to be caused by the following file: ntkrnlpa.exe

  DRIVER_POWER_STATE_FAILURE

  Technical information:

  STOP: 0X0000009F (0 X 00000003, 0X8903B458, 0X83133AE0, 0X88B16008)

  Ntkrnlpa.exe - address 0x830eaf1c base at 0x8300c000 DateStamp 0x4f5583be

  ********************************************************************************

  I have:

  Intel i5 760
  4 GB of ram
  Windows 7 32 bit
  Comodo 5.10.228257.2253
  NOD32 4.2.71.2

  In case there is something wireless (I read something on this, but not sure!), I have:

  Device USB of TP-link wireless (& TP-link utility)
  SecurityKISS tunnel software
  proXPN vpn software

  Drivers:
  Microsoft virtual Wifi Miniport adaprot
  Realtek PCIe GBE controller (disabled)
  TP - LINK 150Mbps Wireless N adapter Lite
  Unknown device
  TP - LINK 150Mbps Wireless N adapter Lite

  VirtualBox has been running a win XP version that has Avast & Comodo

  At the point of issue, virtualbox was operating in full screen, Firefox open and no one to the PC (no action)

  I downloaded the dump file to:
  http://DepositFiles.com/files/q4ebw15vb
  Password: win7win

  Thank you

  Hello

  You have made any changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1: Disconnect all external devices except your mouse and your keyboard and check what is happening.

  Method 2:

  Step 1: Login to the Safe Mode and then check if it helps.

  Start your computer in safe mode

  Step 2: Perform a clean boot Hardware and a software clean boot, and then check if it helps.

  (a) click "Start" and type "DEVMGMT. MSC"in the search text box and press enter

  (b) develop "audio, video and game controllers".

  (c) right click on your sound card, select "Properties".

  (d) 'Pilot' click, click Disable the selected device. Click OK

  (e) Please use the same method to disable other devices such as: Modem, network card, CD - R drive. Please note that some devices such as the video card are not available should be disabled.

  (f) Please restart the computer.

  Note: do not forget to activate the devices to return after you complete your troubleshooting.

  Method 3: You can also check out the link and then check if it helps.

  Resolve stop (blue screen) error in Windows 7

• Get windows error blue screen after installation Service

  I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.

  I tried to install GO twice and got the same error.

  Awating for your valuable review

  Hi piZviZ,

  Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:

  (1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.

  (2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1

  (3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails

  I recommend just update to the latest going TO if possible.

  Kind regards

  Joseph

• Windows 7 blue screen with prototype and crashed with Crysis

  I have windows 7 Professional 64-bit and I have the latest Nvidia Forceware drivers for my graphics card.

  I played the game "ProtoType" I've been on it for about an hour, and then he froze suddenly and given a blue screen then restarted.

  It is the newspaper that came after it restarted:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 5129

  More information about the problem:
  BCCode: d1
  BCP1: 000000000000004A
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF88004684705
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\012110-16785-01.dmp
  C:\Users\Alex\AppData\Local\Temp\WER-29484-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Also, when I play the game Crysis after around 10-30 minutes, it freezes and unresponsive, and I have to leave. It's the journal Crysis comes with.
  (same error happens in exes Crysis 32-bit and 64-bit)

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Crysis.exe
  Application version: 1.1.1.6115
  Application timestamp: 562b029a
  Fault Module name: KERNELBASE.dll
  Fault Module Version: 6.1.7600.16385
  Timestamp of Module error: 4a5bdbdf
  Exception code: 0000087a
  Exception offset: 0000b 727
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 5129
  Additional information 1: a580
  More information 2: a580fb66e5132619b142ac800d3ffa2b
  3 more information: a40c
  Additional information 4: a40ce37e5f74a8bbc8853b60e476fc9d

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Thanks for your help :D

  animebuster,
  For error that you got with ProtoType, I found some information on our site MSDN (which is intended for the developers).  Here is the explanation of this error code:

  0XD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
  The DRIVER_IRQL_NOT_LESS_OR_EQUAL bug control has a value of 0x000000D1. This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  I suggest you check that all your drivers are up-to-date.
  If you get a response from the thread of Crysis then let us know. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WINDOWS 7 blue screens and boots then black screen several times through the day! View all different types of error messages. BORING

  Well, I have to tell you my story that I was happy that I bought a "new" (DELL) C.P. and 64 bit vista pre-installed and that he had not. and had some problems with my new! Dell xps 9000 from the GET go > but I learned that I was eligible for a free windows 7 upgrade and was also, said that this new victory. 7 program would solve all my problems? B.S., he transformed all senareio into a nightmare, I uninstalled it AND REINSTALLED IT 3 times not to mention having get for 7 different print drivers then reloading all antivirus, blah - blah - blah - I was on the phone with Dell for over 3 weeks now! Of course cannot use a new P.C. like this Hey? I have a file a mile long if it is "they keep a good journal at all? So I will contact the Dell for arrangements to resume their JUNK. Their so-called technical support is aweful @ best. They have me so DARN confused I can't sleep at night knowing what I had paid for my new system and still having all these questions really now this is just crazy... I have also contacted "MICROSOFT" with these problems, as I have a warranty on the win 7 program operating system and when I called the first thing of this guy's mouth was, I had to pay their money $$$ for any type of support? NOW it's sad/mad/nutz out hey? All I know is that I'm the guy with the great Bill to refund my purchase and remains sure if I can't use the c.p. I'm not paying for it! and I don't want it, that is of no use to me! Bye Bye blue screen of Messages of error and dreams MERRY CHRISTMAS to YOU ALL... OH YES HOWS THAT SAYING GO?  "BETTER DAYS AHEAD" that they will be when I'm done with DELL and MICROSOFT! It was an unreal experience more as I said a nightmare! P.S.OH YES NO MORE MIDNIGHT TECH SUPPORT CALL EITHER! CAN YOU IMAGINE THAT CALL ME AT ALL HOURS OF THE NIGHT TO FIX WHAT? NOTHING! WHAT HAPPENED TO DELL AND MICROSOFT

  Hello

  Sorry, but it seems that Dell does not provide a quality service for you. They have to replace their machine
  with a new one that is fully functional and you shouldn't accept anything less. 3 weeks and they did not
  fixed a new machine is excessive. Climbing with Dell and recover your money or a new.

  Would like power to help more.
  Rob - bicycle - Mark Twain said it is good.