Windows 7 - cannot perform updates (cnupdater.exe is not found)

Similar Questions

• C:\Windows\system32\CNUpdater.exe was not found.

  When I start the PC, it says there's an update available, but I get this error "C:\Windows\system32\CNUpdater.exe was not found." when I try to do the update. Can you help me with this? Thank you!

  But this isn't an update of Windows. See http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/f1c4b380-679d-466e-908d-bfa9684c6133 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista - Error Code: 1706 (cannot install updates) valid any source not found for product Microsoft works9, which came with my vista

  Microsoft Works 9 came with my Windows vista Home Premium April 14,2009, I leave automatic updates do their thing, such as recommended and I was prompted to restart. So I did.    Now it always tells me I have the same important updates 3.

  (A security update for Microsoft Works 9 (KB2092914) and office 2007 (KB2251419) word and office system (KB2277947).

  So now, he tells me when I click on ms works, that the error 1706 no valid source could not trading for the microsoft works product. Windows install cannot continue.

  That's the only change I made to my computer, so I did what I could do,

  I contacted HP for help and we have tried everything and to

  Discover that now my "D" drive is corrupt also.

  I would like to know how I can get back my program without making a recovery or even buy it?

  I really hope someone out there can help me.

  You know I bought an XP in 2003 and it is still a good kicking.

  Thank you

  Hello

  You can check if the error message you get when you try to use the application is due to the failure of the installation of the update of Windows related to Microsoft Works.

  Step 1:

  Check in Windows Update history if the installation failed or not for the 3 articles mentioned.

  To open Windows Update history

  (a) click theStart button,.

  (b) go toControl Panel,.

  (c) selectprograms, and then, under programs and features.

  (d) clickview installed updates.

  (e) search for update driver for the printer, get the KB article number.

  Step 2:

  You can perform a restore of the system on the computer to restore back the previous settings control also if Microsoft Works works.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information follow the link below.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Step 3:

  If the installation fails, try to install the updates manually and check what is happening. Click the links to download the three updates mentioned.

  Update of security for Microsoft Works 9 (KB2092914)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=feb121ad-e5f6-40E2-BF12-045ae5c2a754&displaylang=en

  Update of security for Microsoft Office Word 2007 (KB2251419)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=0d7210a3-662e-41e7-AFFC-ae94f9d89388&displaylang=en

  Update of security for Microsoft Office Word 2007 (KB2251419)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ed5b9671-651d-41F3-aed3-93ee8a28657f&displaylang=en

  Note: Before to install updates manually set the computer to clean up state of startup and then continue with the installation. To configure your computer to clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing the updates, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 - cannot perform updates after reinstall

  the hardsek is damaged. I buy a new another Hardisek
  and downloaded the windows7 old even with the original CD
  But I can't update
  
  What is the solution
   

  Hello Zohar545zo,

  Thank you for your message.  Also, can you confirm that your operating system has been activated after reinstalling?  You may need to perform a phone activation.

  1. Click Start, and then in the search box type: slui.exe 4
  2. press enter on your keyboard
  3. Select your country.
  4. Select the option to activate the phone, then call and hold to a real person.

  Please let us know, we are looking forward to hear back on your part.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 cannot install updates error 800 b 0001

  I already find the answer on google, but still cannot install updates so far...

  Please someone help :"(

  Windows 8 cannot install updates error 800 b 0001

  Hi YanaYulia,

  -Don't you make changes to the computer before this problem?

  Follow these methods:

  Method 1.

  You might be able to solve certain problems by running a convenience store will automatically fix some common problems with Windows Update. Run this utility for troubleshooting, restart the computer and try checking updates once more.

  The problems with the installation of the updates: http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates

  Method 2.

  If the problem persists, we re - save the Wintrust.dll.

  Press Windows + X, and then click prompt (Admin).

  Type regsvr32 Wintrust.dll/s

  Close the command prompt window, restart the computer and try again to install updates.

  Method 3.

  Run the DISM tool

  -Swipe in the right edge of the screen and then tap Search.
  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)

  B. - enter command prompt in the search box.

  C. - in the list of results, drag down on or right click command prompt, and then press or click run as administrator.

  D. - in the administrator: command prompt window, type the following commands. Press ENTER after each command:

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  E. - close the administrator: command prompt window, type Exitand press ENTER.

  F. - run Windows Update again.

  Response with the State of the question and we will be happy to offer you our help.

• Windows Xp cannot download updates (error 0 x 80070424)

  original title: Windows Xp cannot download updates

  I am running XP pro sp3 v2002.

  Unable to download windows updates

  I tried all the online diagnostics, does not.

  When I click on windows updates it will here

  http://www.update.Microsoft.com/windowsupdate/v6/default.aspx?ln=en-us

  That seems normal

  Then after that it checks to see if I have the correct update software it goes to the "Welcome to Windows update" screen and asks me to select "express" or "custom".

  I click on "express" and the progress bar starts momentarily for "checking for the latest updates" and then I get this "

  [Error number: 0 x 80070424]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  I tried to launch MS Fixit and I get the message

  "Update of Windows components must be repaired"

  I noticed in the microsoft management console/services that I don't have "Automatic updates" listed. In 1 diagnoses he asked me to check this

  Any help would be appreciated

  Have tried everything you suggested already twice and at least a dozen other patches from microsoft and others, thanks for the good suggestions. Yes, the OS is a registered valid copy.

  Found the fix here from the post of "Mike12. He had the same exact problems and the software I was running.

  http://www.pcmech.com/Forum/Windows-legacy-support-XP-earlier/221106-error-0x80070424.html

  I went to start / run and type in regsvr32 c:\windows\system32\wuaueng.dll and now I can get the updates.

• Cannot download updates to silverlight, can not cancel this part of the old C:\temp\ext18866\ program what can I do?

  Cannot download updates to silverlight, can not cancel this part of the old C:\temp\ext18866\ program what can I do?

  Please post here for assistance: http://forums.silverlight.net/forums/13.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• When I try to open the Control Panel, add or remove programs, a window appears saying "C:Windows\system32\rundll32.exe Application not found.

  Original title: rundll.exe error

  I checked the previous messages and can't seem to find a solution to this problem.  Recently I ran 3 different scans, i.e. sbybot, avast and Malawarebytes virus. After that I ran these anti-virus programs and remove viruses, I was not able to open any more virus scanners. Every time I tried, would open a window saying "Choose the program you want to use to open this file." If I try to download a new virus scanner, it says the same thing.

  When I try to open the Control Panel, add or remove programs, a window appears saying "C:Windows\system32\rundll32.exe Application not found. I checked this file on my c: drive\system 32 and see the rundll.exe file. I also copy and pasted the file rundll.exe my CD of Windows XP in c: Windows\System32

  Everything else seems to work fine on my computer, and I get no message on the rundll.exe file when the computer starts up first.

  Any help would be popular!

  Hello

  You rename regedit.exe regedit.com?

  Remove from my computer-> tools-> file-> option-> view tickmark for "Hide extension for known file types"-> ok-online local disk now C:\WINDOWS\

  Regedit.exe search

  Make a right-click Rename regedit.com

  From start-> Run Type & -> regedit.com-> ok.

  and follow the registry path IE: HKEY_LOCAL_MACHINE\Software\Classes\Exefile\Shell\Open\Command

  I hope this helps.

• C:\Windows\system32\regsvr32.exe is not found

  When I try to load the softwear I get this message - C:\windows\system32\regsvr32.exe is not found

  Hey,.

  Read this article:
  http://support.Microsoft.com/kb/q249873

• C:Windows/system32/rundll32.exe - Application not found - OK__I get this error message when you try to open a program

  Error messages occur now - seem to appear now, after I did a Defrag.  If I try to open AOL, it brings me to a display list who wants to choose from a list of programs.  For AOL, I click on AOL.  I didn't used to have to select from a list of display.  Then I tried to open an Astrology program and it took me to the same list, which of course is not.  Now, I get the same error as follows: C:Windows/system32/rundll32.exe - Application not found - OK

  Here's a Plan:

  Goto, start system restore restore Menu\All Programs\Accessories\System Tools\System

  Now select the oldest Restore Point and restore your computer, but first make sure that you have an external drive.

  After that C:\Windows\System32\Rundll32.exe copy the external drive and the disc is ejected

  Open the system restore and undo restore

  After the undo operation is copy the Rundll32.exe in the road to C:\Windows\System32

  and the problem solved

  Note: the rundll32.exe should be missed recently and you should have an old Restore Point which contains a file Rundll32.exe Intact

• I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  Hello

  you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?

  check the reports on the problems and solutions

  You can do a support ticket, follow the link

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support

  Microsoft product support has some tools that will be useful and can help to find a solution

  have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

• I am installing service pack 2 for windows vista home edition I get the error not found 0 x 80070490

  I try to install service pack 2 for windows home edition vista, I get the error not found 0 x 80070490 msicexec has an option to make extended logging, but spinstall/help shows all options.

  Split of: http://answers.microsoft.com/thread/82972695-1d12-4a07-9d72-0f9928a68dc1

  Hello

  Apologize for the delay in response. Please see the following article to resolve the issue of Service pack 2 installation:

  Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates

  Note: Make sure you back up your data before you perform a repair of Windows installation.

  Hope this information helps. Back to us for assistance.

• Error message: Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the dynamic library CSCDLL.dll, Quickbooks 2012 run

  Original title: error Ordinal 62
  I received the following error sporadically when I try the accounting version of Quickbooks 2012.  Accordingly, it does not run Quickbooks on my desktop but it allows me to run on my laptop.  Help, please.  "Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the CSCDLL.dll dynamic link library.

  Hello

   

  You can try the following steps and check.

   

  Method 1:

  Check if there is a cscui.dll C:\Windows\SysWOW64 folder.

  The cscui.dll does not exist by default in the C:\Windows\SysWOW64 folder.

  If you find the cscui.dll on the C:\Windows\SysWOW64 you can try right click and rename the cscui.dll to cscui.old.

  Method 2:

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 3:

  You can also perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also check the following thread link and check.

  WARNING 62 Ordinal not found in cscdll.dll