Windows 7 closed in an unexpected way, core Microsoft windows, event ID 41 power, task 63

Similar Questions

• iPhoto closed unexepectedly in unexpected ways

  iMac OS X version 10.8.5

  iPhoto v9.4.3 closes unexpectedly. It opens and then closes immediately. Someone at - it advice?

  A lot of older versions of iPhoto 11 this meet right now:

  Huxly647 discovered this fix

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

• Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!

  Please help me! ....
  Audio service does not
  I tried Services.msc and tried starting windows Audio...
  The following error has come!
  Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!
  There is a sign of X in the audio icon...
  and when I click on this audio icon... TROUBLESHOOTER OPENS...
  all this happened all of a sudden!
  Please help me!
  Thank you.
  Nischal Sp

  Please provide the error screenshot more better assitance. Also, try this:

  Try to copy and merge the audio from another Windows 8 or better service.

  You can do this by going to the Registry Editor (make sure that the other computer is also a 32-bit system)

  Go to HKLM/system/current control set/services/audiosrv click audiosrv and then on the file menu, select export and save the file to a USB key or drive.

  While copy on your machine and merge. Then restart your system.

  Otherwise reset Windows 8:

  http://www.kapilarya.com/how-to-reset-Windows-8

  Good luck once again :)

• 0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted

  Hello! I got this message from malware (I clicked to delete) in surfing on firefox and after awhile the explorer.exe closes with an error. I try to open the Task Manager and it says explore cannot be found!
  I rebooted and then I got this message "0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted" and can't get anywhere.
  I can't even go in safe mode, the same error messages appears.

  Hi James,

  You could try the Startup Repair to see if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Other services and support TCP/IP over NetBIOS in unexpected ways

  Original title: completed service in unexpected ways

  I have a problem with the windows services on two computers running Windows 7 Pro 64 bit. Both computers have four following services keep stop, all at the same time. In this case permanently at random time intervals. Second computer has a two other services below that also stop.

  Reinstalling windows did not help. Install the latest windows updates or hardware drivers did not help either.

  Thank you for all that help or referrals you can give me.

  The support TCP/IP NetBIOS service ended unexpectedly.  He did this 10 times.  The following corrective action will be performed in 100 milliseconds: restart the service.

  The service finished Windows event log in an unexpected way.  He did this 10 times.  The following corrective action will be taken in 60000 milliseconds: restart the service.

  The completed Client DHCP service in unexpected ways.  He did this 10 times.

  The Windows Audio service ended unexpectedly.  He did this 10 times.  The following corrective action will be taken in 60000 milliseconds: restart the service.

  Two additional services that fail on the second PC

  

  The Security Center service ended unexpectedly.  It has done this 1 time.  The following corrective action will be taken in 120000 milliseconds: restart the service.

  The service provider HomeGroup ended unexpectedly.  It has done this 1 time.  The following corrective action will be taken in 60000 milliseconds: restart the service.

  Hi Corwin,

  Thank you for an update and share information that allowed that it would help the other members of the community to solve these problems.

  We are happy to know that you have solved the problem.

  To respond to your request, I suggest you check the link to see the reasons behind the question:

  http://social.technet.Microsoft.com/forums/Windows/en-us/a4216d83-cc81-458e-a2c6-5761077b8baf/IPv6-causes-Windows-services-to-crash

  Please let us know if you have any other questions about Windows.

• Expression of causing in some cases unexpected dumps core XMLTable

  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  With the Partitioning, Oracle Label Security, OLAP, Data Mining
  and Real Application Testing options

  I get a core dump when I run the following SQL code:
  

  select xml.CUSTOMER_EXT_REF_NO,
         xml.TRANS_REF_ID,
         xml.TRADE_NAME,       
         (select nvl2(min(crm_ext_ref_no), 'U', 'I')
          from   TPARTY target 
          where  target.crm_ext_ref_no = xml.customer_ext_ref_no),
         xml.RETAILER_ROLE_NO,
         xml.REL_TRANS_REF_ID,
         xml.LSTG_UPDATE_USER,
         xml.LSTG_UPDATE_DATE,
         :LSTG_CREATE_USER,
         xml.LSTG_CREATE_DATE,
         :LSTG_BATCH_ID,
         xml.LEGAL_NAME,
         xml.GST_NUMBER,
         xml.GST_EXEMPT,
         xml.ERR_MSG 
  from vdata_object_cur vdoc, xmltable('for $i in /TransactionDocument/CogneraTransactions/CogneraTransaction/Customer
  return element row {$i/*[(not(name()="STG_ACTION_TYP") and @Common="Y") or @Lookup="Y"],
                      element CUSTOMER_EXT_REF_NO {data($i/RetailerCustomerID)},
                      (: element STG_ACTION_TYP {if (ora:view("TPARTY")/ROW[CRM_EXT_REF_NO=data($i/RetailerCustomerID)]) then "U" else "I"}, :)                     
                      element LEGAL_NAME {data($i/LegalName)},
                      element TRADE_NAME {if (not(string($i/TradeName))) then data($i/LegalName) else(data($i/TradeName))},
                      element GST_EXEMPT {if (string($i/FederalTaxExempt)="0" or not(string($i/FederalTaxExempt))) then "N" else("Y")},
                      element GST_NUMBER {if (string($i/FederalTaxExempt)="0" or not(string($i/FederalTaxExempt))) then "" else(data($i/FederalTaxExempt))}
                     }
  '
  passing vdoc.xml_content
  columns
  CUSTOMER_EXT_REF_NO VARCHAR2(255) path './CUSTOMER_EXT_REF_NO'
  ,TRANS_REF_ID NUMBER(22,0) path './TRANS_REF_ID'
  ,TRADE_NAME VARCHAR2(255) path './TRADE_NAME'
  ,RETAILER_ROLE_NO VARCHAR2(255) path './RETAILER_ROLE_NO'
  ,REL_TRANS_REF_ID NUMBER(22,0) path './REL_TRANS_REF_ID'
  ,LSTG_UPDATE_USER VARCHAR2(30) path './LSTG_UPDATE_USER'
  ,LSTG_UPDATE_DATE DATE path './LSTG_UPDATE_DATE'
  ,LSTG_CREATE_DATE DATE path './LSTG_CREATE_DATE'
  ,LEGAL_NAME VARCHAR2(255) path './LEGAL_NAME'
  ,GST_NUMBER VARCHAR2(255) path './GST_NUMBER'
  ,GST_EXEMPT VARCHAR2(1) path './GST_EXEMPT'
  ,ERR_MSG VARCHAR2(4000) path './ERR_MSG'
  ) xml 
  where VDOC.DATA_OBJECT_ID = 59293;

  Error of the client (TOAD) is:
  
  ORA-03113: end of file on communication channel
  
  Trace says:
  
  Exception [type: SIGSEGV, address not mapped to object] [ADDR:0xF8] [PC:0 x 2447652, kkqcsiqbcbk () + 172] [flags: 0x0, count: 1]
  Errors in the /oracle/diag/rdbms/vm01/vm01/trace/vm01_ora_6483.trc file (incident = 170590):
  [ORA-07445: exception encountered: core dump [kkqcsiqbcbk () + 172] [SIGSEGV] [ADDR:0xF8] [PC:0 x 2447652] [address not mapped to object]]
  Incident details in: /oracle/diag/rdbms/vm01/vm01/incident/incdir_170590/vm01_ora_6483_i170590.trc
  
  .. .the current sql for the session statement is the one above.
  
  If I comment on the inline sql:
  

  ...
  (select nvl2(min(crm_ext_ref_no), 'U', 'I')
          from   TPARTY target 
         where  target.crm_ext_ref_no = xml.customer_ext_ref_no)
  ...

  OTHERWISE, I use the commented on ora: opinion:
  

  element STG_ACTION_TYP {if (ora:view("TPARTY")/ROW[CRM_EXT_REF_NO=data($i/RetailerCustomerID)]) then "U" else "I"},

  OR, I've read the XML in a CLOB column rather (to test, I had the same CLOB_CONTENT and XML_CONTENT data in the view 'vdata_object_cur'):
  

  passing xmltype.createxml(vdoc.clob_content)

  .. the stmt .then DON'T crash and returns the expected data.
  
  Stranger still, because my SQL statements are dynamically generated from metadata, I have many more cases of the very similar sql that does NOT fall down for example, I use the online display and read data from the xmltype XML_CONTENT column.
  
  The solution has been in production for about 2 years, 'by the way' the XML as a variable binding (from: v_xml) without any problems (apart from the fact that performance was poor that's why I'm improving the solution to read the xml code in the column XML_CONTENT which is defined as XMLTYPE with binary storage and has a XMLIndex to this topic). The use of the XMLIndex has reduced a file load which would take 8hrs to in just 8 minutes.
  
  I also tried a "pipe" ORDERLY and LEADER to ensure that Oracle generated rowset XMLTABLE first, but I still get the dump.
  
  Of course, with some unexpected dumps core, I'd get normally a TAR raised, but my dev env prod a little different and I don't know if this only happens in my dev env (a custom Oracle Developer days VM)...
  
  Any ideas?
  
  Thanks in advance.
  
  Published by: Pollocks01 on March 12, 2013 06:32

  Hello

  Of course, with some unexpected dumps core, I'd get normally a TAR raised, but my dev env prod a little different and I don't know if this only happens in my dev env (a custom Oracle Developer days VM)...

  Any ideas?

  What kind of help do you need?

  As you say, a core dump is a job for Oracle Support, except if the trace shows a well-known problem but that doesn't seem to be the case here.

  If you want someone to confirm the problem on another instance, then you will need to provide a case of test complete with table/index CFDS and, of course, a doc XML example.

• I usually 30 tabs open, and memory rises in an unexpected way, so that when it reaches 1.2 GB, firefox crashes. Also if, for example firefox consumes 700 MB of memory (with lots of tabs open), and if I close the tabs and let just 2 or 3 op

  I usually 30 tabs open, and memory rises in an unexpected way, so that when it reaches 1.2 GB, firefox crashes. Also if, for example firefox consumes 700 MB of memory (with lots of tabs open), and if I close the tabs and let just 2 or 3 open, the memory usage does not go down and left to the 700 MB. Thank you for your attention. Cordially, Ricardo

  ID of the Crash

  BP-765e3c37-0edc-4ED6-a4e9-7ed612100526

  See http://kb.mozillazine.org/Firefox_crashes and Firefox plant - troubleshoot and prevent assistance fixing crashes

• Photosmart 5520-e: utility from HP in an unexpected way

  I just bought a Photosmart 5520 - e and cannot open the HP utility to complete the installation. I am running OSX 10.9.5. All I get when installation has reached a level that is expected to open the Configuration Utility Wizard is a message that the utility in an unexpected way. I downloaded and installed the latest software on the HP site. Can anyone help with this? I am able to print, copy and scan (I use a USB cable connection, have not tried to set up a wireless connection). I guess I need the utility to manage the printer works for example alignment, cleaning of printheads etc.. Thank you

  Hey saulad,.

  Thank you for your question! I understand that you are having problems with your installation, because the utility is stop unexpectedly. Please refer to the following solution and let me know if it helps.

  http://support.HP.com/us-en/document/c03978524

  If this does not help your question, I would be happy to continue working with you. If it solves your problem, please indicate the problem solved.

  Thank you!

• Why my illustrator cs5 in unexpected ways when I try to save

  Why my illustrator cs5 in unexpected ways when I try to save

  Just guess: it is El Capitan and you try to save anywhere other than in the "Documents"?

• Intercept Windows event messages

  Is there an easy way of Windows event messages stop without having to write a dll to do?

  The command that I am looking for:

  WM_SYSCOMMAND

  I have a touch screen application and I am tring to prevent treatment of the events when he recovers from fashion 'sleep '. I need to be on the screen and no screen saver.

  This has probably already been processed by this request: http://forums.ni.com/t5/LabVIEW/Upconvert-VI-Requests/m-p/1402560#M546297

• T410 2516CTO random freezes without anything in the Windows Event Viewer. :(

  I used Update Retriever + slim Installer (practically system update 4.0 but a client version + server) to download the drivers and install Windows 7 Ultimate x 64 with SP1 on this machine. It takes a hard power off by pressing the button for 5 seconds

  Core i7 620M

  8 GB RAM

  320GB 7.2 k RPM HARD drive

  Optimus graphics

  Gobi2000 WWAN

  uPek Fingerprint reader

  The machine crashes without warning and did with the two installation (more common) factory and with the deleted HARD disk and using Windows 7 Ultimate SP1 from Microsoft x 64 slipstreamed (freezes much less often). Are there tools that I can use to help diagnose this problem?

  I also used an adapter 90W AC and 65W adapter on this machine. The random freezes occur on each adapter as well.

  I read other people who have the same frustrations on to freeze, but no other situation is exactly the same as mine unfortunately - most other occasions you can find something in the Windows Event Viewer!

  Hi again

  Discovered it was the 6300 WiFi Intel that was locking the machine. It disabled via switch h/w or BIOS does the gel to disappear.

  So he left. Once off the coast of the incident of a 6300 wireless card has failed.

• Stop "Windows event log" stops Browser Hijack

  Hi, I'm under Windows 7 SP1 and IE 11.

  Whenever I have start my PC, go on the Internet and launch IE, the first page which is to www.globalsearch.com. I tried almost all the options, reset IE, remove IE and add IE return, remove using all kinds of software malware/antivirus/scanners... u name it... It is detected as a browser ONLY on Internet Explorer browser hijacking. Can I get cleaned up in the registry, etc., removed to quarantine... but then the next time I start my PC the browser hijacking appears again during the launch of IE.

  The ONLY thing so far that was able to prevent browser hijacking is STOPPED "to the Windows event log. Managed to get it solved this way after troubleshooting for 2 weeks.

  My question is whether or not it is safe to STOP permanently Windows event log in order for me to not have this Browser Hijack on IE happen? If not, is there anyway I can 'REFRESH' to the Windows event log?

  Thank you very much.

  Thank you.

  I managed to remove it by understanding how Windows and other services event viewer which depended on. The culprit was inside the Task Scheduler. (Once you clear the Windows Event Viewer... Task Scheduler stops as well... so no browser don't hijack).

  Inside of the Task Scheduler, so I had to check the task that has been loaded at startup and I managed to find the culprit. I've removed from the Task Scheduler, then proceeds to the go to the directory of the EXE, it was loading and removed manually in safe MODE.

  Who did the lap :)

  Thanks for the reply Ramesh. Very much appreciated.

• Disable the use of the Windows event log

  Hello everyone. Thank you in advance for help.

  Is there a way to disable the Oracle of Scripture in the Windows event log? Or at the very least, ignore errors resulting from Oracle not be able to write to them?

  -Arik

  In windows when AUDIT_TRAIL = OS, verification of documents are written in the same newspaper. Changing this setting to DB if you want to not audit records to be written to the event viewer. Also no matter what your SYSTEM operations will be written to the event log even if your audit_trail is set to DB. You can disable auditing of sys setting AUDIT_SYS_OPERATIONS = false

• Monitoring windows event logs

  Hi all
  
  I'm testing Hyperic, ultimatly I want to use it to monitor my servers WIndows clients under a managed services arrangement.  To do this, I need to be able to control at least:
  
  * Free disk space
  * Windows event log in the system and Application logs (alert for warnings, notify errors)
  * Available WIndows updates
  * Updated anti-virus status (I think that the best way to do that through WMI for Windows Security Center).
  
  I have most of the working group above (I didn't start on the WMI stuff yet), but I'm struggling with the event logs.  I've attached a screenshot of the configuration of the platform.  It seems to work to a certain extent, but I see only events information, any information, warning and error that would involve the confgiuration (I suppose that the order is, from lowest to highest, information, warning, error).
  
  I would like to appreceate help for this.  I think that Hyperic is a great product that will meet my needs, but I just need to overcome these problems with the event log.

  We have excellent documentation on Event Manager.

  http://support.Hyperic.com/display/doc/UI-inventory.configuration#UI-inventory.Configuration-track

  Please let me know if you still have any questions.

  Thank you
  Lorenzo

• CC Illustrator crashes at startup (windows event viewer message included)

  Windows Event Viewer shows like this...

  -

  System

  - Provider of [ Nom] Application error

  - Event ID 1000 [ Qualification] 0

  Level 2

  Task 100

  Keywords 0 x 80000000000000

  - TimeCreated [ SystemTime] 2013-12 - 09T 06: 35:08.000000000Z

  
  EventRecordID71639

  Channel Application

  Computer HPNB-dhleeNB

  Security

  -

  EventData

  Illustrator.exe

  17.0.0.260

  52822426

  ntdll.dll

  6.1.7601.18247

  521ea8e7

  C0000374

  000ce753

  A690

  
  01cef4a8afb2dd09
  
  C:\Program Files (x 86) \Adobe\Adobe Illustrator CC\Support Files\Contents\Windows\Illustrator.exe

  C:\Windows\SysWOW64\ntdll.dll

  0b8a3ab7-609c-11E3-8e0d-005056C00008

  Help, please.

  Problem solved.   See below.

  3 positions
  November 25, 2013

  2AlanDrVita.

  

  November 26, 2013 09:16 in response to outdoorz

  Report

  Maybe I was able to solve my problem. I held shift when opening Illustrator and open in a bare bones mode, and then closed and reopened without getting the error message. Good luck to you.

  Was it useful? Yes No