Windows 7 - disable icmp echo request

Similar Questions

• Whenever I start my computer after the office's I get a windows firewall disabled alert

  Whenever I start my computer after the office is responsible, I get a warning from windows firewall disabled. The latter for more than 60 seconds. After that, my firewall is on.
  How to solve this delay?

  Hello

  What is firewall WIN XP or any other third-party firewall?

  If it is integrated, you can reset the firewall in factory default state. Run from the command prompts this command:

  NETSH FIREWALL RESET

  How to run the command prompt:

  Click on Start - run - write CMD , and then click OK

  LC

• Unknown problem caused media player to close and that to protect my Media Player Windows has disabled skins

  Original title: "skins".
  I recently downloaded a lot of skins from the microsoft Web site, and it worked very well for about an hour. Then I saw a skin called 'come back' I don't not download but recalled seeing in my default skins that were already installed. I wanted to see what it was and when I did caused a problem which I can't specify because the notification window remained only until fairly long for me to see (in a nutshell) "unknown problem caused media player to close and to protect my Media Player Windows has disabled skins. Now, I spent over 3 hours to try each answer in the forums for this issue and not one worked for me. I am running Windows Vista Home Basic and I can't find a way to reactivate my skin so that I can use only skins working know is the company and changing the skin that caused the problem. I tried deleting and reinstalling all the skins again, but again does not help. I tried to do a right click on the skin to go to properties to activate as suggested in the forums, but when I right click on it nothing happens. So now I have like 20 downloaded skins but the only way that they work is if I download again and choose to view them, but if I try to change the playlist or switch to full mode then it goes to firm skin and I download it again to get the one I want. I am so frustrated with this problem which I think should be a very easy thing to fix, but nothing I try works. Please help me. Thanks for any help you may be able to provide.

  Hello

  Method 1:
  You can perform a scan SFC and check.
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link, how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:
  Alternatively, you can try to uninstall and reinstall windows media player and check:
  a. click Start and select Control Panel.
  b. click on programs and features.
  c. click on or turn off Windows features turn on on the left side.
  d. develop media features; Uncheck Windows Media Player.
  e. click Yes and OK to continue.
  f. restart the computer.
  WMP12 would be uninstalled now. Restart the computer.

  Note: If WMP12 is already disabled, follow the steps mentioned below:

  After the restart, follow these steps:

  a. click Start and select Control Panel.
  b. click on programs and features.
  c. click on or turn off Windows features turn on on the left side.
  d. develop media features; Check the Windows Media Player.
  e. click Yes and OK to continue.
  f. restart the computer.
  This would be re - install Windows Media Player 12.

• ICMP Echo-> addictive Telnet?

  During the preliminary test of an ACL I intend to implement on a small business network, I added the statement:

  "refuse the ICMP messages to echo host 192.168.1.1 host 192.168.3.51 ' and found that he indeed killed my pulse, but I also found that my Telnet session fell too. I'm pretty new in the field of security, but maybe someone could find out if Telnet needs ICMP echo to function. I did research Telnet and there is information on an 'echo', but I think it's part of the Protocol Telnet and not echo ICMP message that I'm talking about. Any help would be great!

  Aaron

  Telnet runs on the TCP protocol and deny the echo icmp message will not stop directly telnet. You demonstrate that telnet between the two hosts have worked before you changed the access list? And with the access list refuse telnet and icmp echo does not have you tested to find out if the elimination of the deny icmp echo allows telnet to work again?

  Is it possible that the echo deny icmp message is the only statement in the access list? If Yes, then what must be clear is that access-group is used on an interface to apply an access list, but there is no statement in the traffic access list is permitted. But as soon as there is no instruction in the access list then implicitly deny anything at the bottom of the access list. So, if the access list was empty the telnet would work, but when you add the deny for icmp echo the implicit refusal would deny the telnet.

  If none of the suggestions that I made solve you so I think we need some more information. Can you post the access list you use? And some information about your network topology?

  HTH

  Rick

• "Receive the error message" Windows 7 error 0x8007045D: the request could not be performed because of an i/o device error. "

  Original title: Windows I/O device error?

  Hi all

  I'm Chinmaya and I use Windows 7 Ultimate.

  I have this error message.
  "Windows 7 error 0x8007045D: the request could not be performed because of an i/o device error."

  whenever I try to copy songs to my PSP device. In fact, it started when I was copying a 16 GB file from a USB on my computer. One night before everything was fine. But now he's screwed. I tried several times, restore, backup start in safe mode and almost everything that has been mentioned in other responses from Microsoft. Another important thing, I was you know is

  Whenever I connect my camera to the computer, my computer is not responding. All possible suggestions... Please help :)

  Hello Chinmaya Sharma,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, looks like you have a problem with the Windows 7 error 0x8007045D error message: the request could not be performed because of an i/o device error

  Perform the disk check and check.

  Check a drive for errors (Windows 7)

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Answer to us if you are having problems with error e/s or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Games for window live - "a required componet windows is disabled.

  Hello I downloaded games for windows live so I could play gta 4 my steam and after installing and launching library, I get a window to trouble shoot that takes me to a nonexistent site, it indicates that a required component windows is disabled on your help please machine

  Hello

  Thank you very much for the detailed information.

  I suggest you get the same question in forum Games for Windows and check if it helps.

  Games for Windows: http://forums.Xbox.com/GFW/default.aspx

  As a work around, you can try the following steps and check the status of the issue

  1) press the Windows and R keys together, type services.msc

  2) scroll down through the new "Windows Live ID Sign - In Assistant" dialog box and check the status: if it is stopped, double click it and change to automatic under 'Startup type'.

  3) press the Windows and R together, type msconfig

  4) click on the 'Services' tab and scroll down to "Windows Live ID Sign - In Assistant" and check the status: if it is disabled, select the check box to the left to activate.

  5) press OK and when it prompts, choose "exit without restart".

  (6) to start the game and check the status of the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• I've been using Photoshop CS6 Student Edition on 2 laptops; updated Windows 8 to 10 Windows without disabling CS6 and installer says I already have 2 options and that you can not install

  I bought Photoshop CS6 Student Edition through B & H in 2014 for two users, which I used in my 2 laptops and yesterday I have one of my laptops upgraded Windows 8 to 10 Windows without disabling the Photoshop CS6 Student Edition on it. Now, when to start the download of the software again in the same portable computer the installer says, I used 2 options and impossible to install any other software. What should I do to install the software again?

  A Win10 update is SUPPOSED to maintain all existing software without having to reinstall... so exactly how did you install Win10?

  In any case, to have your adjusted number of activations you must communicate directly with Adobe

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Windows Media Player library sharing request

  I received a request to share Windows Media Player library. I'm not on a network. Is this some type of malware or something? How should I handle this? A month ago, I received a similar request for iTunes sharing Jeremy-PC. Help, please. My computer has been hacked?

  You're invited because you are on a network, this is a security feature of Windows.

  I assume that you have chosen the option to not share when asked?

  You can safely share if you know who you are sharing with (if you know who is Jeremy-PC)

  If you prefer not to share with who you can disable media sharing.

  To activate:

  When you are connected to the internet, go to: Control Panel, network and sharing Center.

  Expand the sharing of multimedia files, click on edit, if media sharing is currently disabled, there will be a popup.

  If you check the share my media, then click OK, you get another popup.

  Here you can highlight the computers on the network and allow or deny.

  If you click settings, you can choose what you want to share.

  To turn off:

  When you are connected to the internet, go to: Control Panel, network and sharing Center.

  Develop sharing media files and click on change, if media sharing is currently on uncheck share my media to:

  Click on apply, OK

• Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

  How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

  Hi Joseph,.

  1 are you always face the question or the issue are already fixed?

  2 Windows operating system you are using?

  If you still experience the problem, you can follow this link completely and check if the problem persists.

  In the Windows wireless network connection problems

  You can also read the following article and check.

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

• Windows Update disables competing anti-virus programs

  I use Norton anti-virus for nearly a decade.  For this reason, I have not installed Windows Security, as it is in conflict.  I do every week a routine Windows Update.  Two nights ago, it looks like Windows Update automatically installed Windows security without my permission.  This has created a huge conflict with Norton anti-virus, various alerts of infection appeared and my network of connections have been disabled.  I had no choice but to do a system restore and disable Windows Update altogether.  I want to update Windows for occasional useful bugfixes, but cannot take the risk of extreme hassle of security of Windows being installed without my permission.  Any ideas?

  So far, the system restore and the sweet Norton seems to have fixed.  But he was mean.

• The latest version of windows update disable IE8

  The last Windows Update is disabling IE, the program starts but then access the internet, I restored the system to before the update, but when the update came up again the problem came back, I just do a restore of the system for 12.10.10 and it worked. any body have tips on what to do next? can I disable windows updates? Am running Windows 7.

  You see the effects of a hijackware infection. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section of http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the Norton removal tool before installing updates, Windows Service Packs or updates to IE AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update Windows KB915597 disabled my card (nVidia GeForce 9300GE) graphics

  Reposted
  Hi, after updated windows updated 10/19/09 my graphics card has been disabled (nVidia GeForce 9300GE). I tried to activate the device, prompting the update driver, and the update failed to install the device became "not recognized".  I restored the system before the update and everything was ok until the PC has been stopped and restarted.  I have been through the process of restoring about 6 times, each time, try another way of preventing recurrence for example turn off the automatic updates, uninstall KB915597, etc., but nothing works. Is there a permanent solution to this mess?
  PS my system is Vista on a 64-bit AMD Phenom X 4 processor.
  Thank you

  Hello

  Uninstall the driver of graphics completely, and then restart the computer.
  Then re-install the graphics card driver by downloading from:
  http://www.nvidia.com/download/index.aspx?lang=en-us

  If this does not help then repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Hope this helps!

• When trying to update Windows XP get error: "the requested key loockup not found in any active activation context.

  I have Windows XP home edition 2002 and I try to update this software online and yet whenever I have it try, it gives me this message "the requested loockup key was not found in any active activation context.

  Please let me know what this means and what I can do in response to the update.
  Thank you

  Original title: need help to update my Window XP 2002

  Hello, Mariel,.

  There are several discussions on the issue-

  Step 1: uninstall Internet Explorer 7 and check whether the problem is resolved.

  http://support.Microsoft.com/kb/927177/en-us

  Step 2 : repair Internet Explorer 6 by using the System File Checker in Windows XP.

  If you already have Windows XP Service Pack 2 installed, and you do not want to install Internet Explorer 8, you may be able to resolve problems with Internet Explorer 6 by running the System File Checker.

  To run the System File Checker, follow these steps:

  1. Click Start, click Run type sfc/scannow, and then press ENTER.

  2 follow the prompts throughout the System File Checker process.

  3. restart the computer when System File Checker process is complete.

  You can also check out the link below.

  http://support.Microsoft.com/kb/318378

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/the-requested-lookup-key-was-not-found-in-any/5fd9fcf1-CAC4-411e-a66a-8f19d8b73586

  Good luck!

• I had a request on Windows Live Solution center and request still pending, cannot not find post or even open window Live Solution gives error!

  request lost post on window for e-mail folder

  I post a request on Windows Live Solution center about 27 July give my email name - and request still pending, not found or even open window Live Solution gives error!

  the application in question was: when I put in order my window live folders mail had become unstable, I remove a double folder which appear empty, I moved subfolder of a folder and subfoulders lost.

  I've lost Business-Optus DSL-city of Luigi Swan - Bank - various - Computer.They contain information that was not save on my important document

  My request was if possible to recover them. Happened this week is so cool to be given there.

  Thank you

  Luigi

  Hello

  The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/product.aspx?ProductID=10

• Presario SR 1475 CL ~ Windows XP ~ disable access Manager

  Can someone help with the current directives to disable the "Content Advisor" for a Presario...

  I searched this forum & almost had instructions on how to disable the "Content Advisor" (ok 11 of the first 15 steps)... steps 16-22 has been the basis of restarting the computer, tools, internet options, etc... but it was for a HP PC & back in 2004... This is a link for "KnowledgeBase"... visionary

  Content Advisor will not allow access any other web page that... msn home page a Manager access panel pops up saying "the page has no rating", "found label does it not belong to this page", "page blocked by your approved sites list"... it does not know the supervisor password...

  I contacted the technical support microsoft & compaq support for you help, which of course, have been no help...

  Any help will be greatly appreciated... Thank you...

  I do not know what measures you've tried... but here are the steps that I know:

  1. open Internet Explorer
  2. click on 'Tools' in the Internet Explorer toolbar.
  3. click on 'Internet Options' from the menu that appears.
  4. Select the "Content" tab
  5. click on 'Disable' in the Manager section of access.
  6. Enter the administrator password in the password box that appears.
  7. press on "OK". Access Manager is no longer active.

  If the problem persists, follow these steps:
  1. click on start and then run.
  2. Type "regedit" (without the quotes) and click OK
  3. click on the Plus sign next to HKEY_Local_Machine. More entries will be displayed. Click the plus sign next to software, then Microsoft, the windows, then current version, then policies
  4. click on the scoring record
  5. look on the right side at the top. Select and delete the entry called 'key '.
  6. exit Regedit.
  7 restart the computer
  8. open Internet Explorer
  9. go to tools > Internet Options
  10. go to the content tab
  11. click on turn off
  12. asked for the password, leave this blank, and then click OK