Windows 7 displays the error message when you exit + cursor problem

Similar Questions

• Get the error message when you try to launch the 64-bit CC bridge.

  Get the error message when you try to launch Bridge from Photoshop CC 64 bit.  "Cannot complete order because the extension cannot be loaded."  Need of difficulty.  Thank you.

  Hey Adobe Bubba,

  Please uninstall the software, run the cleanup tool, reboot your machine and install again.

  Cleaning tool: http://www.adobe.com/support/contact/cscleanertool.html .

  Kind regards

  Romt Sinha

• I just got the error message when you try to enter my I and Psalm I have paid for the monthly subscription for 3 months and still have not been able to use these software. they are already installed it just let me acess them?

  I just got the error meassage when you try to open both my I and PS I paid monthly payments for the composition and I have these two installed software. What can I do to work on it and why they give me this error message?

  Log, activation, or connection errors. CS5.5 and later versions

  Anything else, to be more precise. you have not provided information system nor told us, what really is the error message.

  Mylenium

• Receive the error message when you try to activate the solution Center

  I get an error message when I try to activate the Solution Center.  'Error in the file c:\Program Imaging\bin\hpqscloc\1033.xml HP analysis'

  I tried to remove and reinstall the entire software suite several times, but did not uninstall the Solution Center file.

  OfficeJet J6450.  Windows 7, 32 bit.

  Hey R29,.

  Start by downloading the full package of driver from here: HP Officejet full feature and driver software

  If you have recently downloaded this driver package, you may be able to skip this step. If you have problems with the steps below and impossible to find a directory, you must re-download the driver pack and launch the exe.

  1. disconnect the USB from the computer printer.

  2. now, go to start > run > and type folder

  3. search for any record label hp_web_release or 7z

  4 inside of this folder, navigate to the 'util' directory > directory 'ccc '.

  5. in there, run Uninstaller_L1 through L4 in order.

  6. check Add/Remove programs in the control panel for additional HP programs that have not been deleted and delete.

  7 remove the HP or Hewlett-Packard directory in Program Files.

  8 Goto Program Files > common files and remove the HP or Hewlett-Packard directory there as well.

  9. Select start > run and type "temp". inside this folder, delete all the files.

  10. Select start > run and type "%temp%". inside this folder, delete all the files.

  11. now restart and reinstall the driver using the driver from the web.

  Let me know if that solves the problem.

  Thank you!

  Sean

• "Cannot display page" error message when you try to download 2010 professional

  Original title:

  Error message on Internet download from trusted sites?

  I am trying to download 2010 Professional on my computer.  Yes, I have a product key.  Whenever I try to download, I get an error message "cannot display the page.  This often happens to me.  Any suggestions?

  Hello

  Thank you for giving us the opportunity to help you with your concern for Windows!

  I see from the description of your post, that you are unable to download Microsoft Office Professional 2010.

  If you get the error message in Internet Explorer , then this might be the cause:

  For performance reasons, where Internet Explorer cannot establish a connection to a proxy server, the proxy server is added to a list of proxy servers bad so that it is not reused for a period of time. This period is 30 minutes by default. If a proxy auto-configuration script returns a PROXY list that specifies several proxy servers, a connection to the proxy in the list will be attempted. If the connection fails, the process is repeated until a connection is established, or the list is exhausted. If the list is exhausted and no connection is established, the user will receive a "Cannot display Page" error message in Internet Explorer.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  1. What is the full error message?

  2 are you able to download other files without any problem?

  3. what web browser do you use to download?

  4. what version of Windows are you using? What service pack is installed on the computer?

  5. based on what site are you trying to download?

  You can check the following link to learn more about the error message "cannot display the Page":

  "Internet Explorer cannot display the webpage" error in Internet Explorer

  http://support.Microsoft.com/kb/956196

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before using thfeature reset the settings of Internet Explorer e.

  Note:

  If the question is limited to Microsoft Office Professional 2010 then please post your question here for assistance:

  http://answers.Microsoft.com/en-us/Office

  Hope the information is useful.

  If you need help on this issue or any problem related to Windows, please keep us informed. We will be happy to help you!

• Get the Error Message When you try to download and install Vista Service Pack 1

  Hello

  Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004.  Please notify.

  Thank you
  Andy

  Hello

  Welcome to the windows vista forums.

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Click the Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Don't forget to restart and then try the update again. If there is no corruption in that
  folder, it would be gone now.

   

  Please, try now to windows update and check if you get the error.

  You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:

  http://support.Microsoft.com/kb/935791#Method3

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• Windows 7 - "Try Again" error message when you move files, creating folder, etc.

  When I try to move files, create a new folder or move a file, save a file with a new file, etc, I get an error message indicating "Item not found", with a description of "Cannot find this item", "this is no longer in C:\...» "," Check the location of the item and try again.

  

  So far, I have tried the following:

  ·         I have run CHKDSK on the drive. [chkdsk c: r], "CHKDSK" came back without error - the disk is a disk SSD

  ·         I also ran "sfc/scannow", she also returned without error.

  ·         I uninstalled all updates that occurred during the time that this came - tested, the computer and reinstalled them.

  ·         Updates of Windows computer are all up to date.

  I have in case I have to move several files, press the button 'Try Again' to each folder that I move.  This becomes a big problem.

  Any help to fix this would be greatly appreciated.

  Dell Precision M 4800: Processor; Intel Core i7-4810MQ CPU @ 2.80 GHz, 2801 Mhz, 4 Lossnay 8 logical processors. Windows 7 Enterprise (64-bit) SP1 | 16 GB memory | SK hynix SH920 2.5 "512GB SSD hard drive

  I've posted this before, but after a few replies, the thread has been cut and has all the additional answers.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Windows-7-error-message-when-moving-files-creating/4b9e607c-7163-4c04-8a78-29e65cc4bf9c

  Hello Greg,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You did any hardware or software changes to your computer before the show.

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of the corrupted Windows files or incorrect registry settings.

  To diagnose the problem, check if the problem occurs in safe mode.
  Refer to this article:
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Please refer to the suggestions of Mr Andersen replied on September 4, 2010 and check the problem with folders.
  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/renaming-folders-causes-item-not-found-error-in/e2cf38c7-9e77-4256-89DE-6308df53d5f9

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Receive the Error Message When you try to activate

  I had a disk crash hard and after repair of the drive, I reinstalled Vista Ultimate SP2. Now when I try to activate, I get the error message that the product ID is alread in use. What should I do to reactivate my software. It's black, real retail box version with original product id always sticker glued to the box.

  Hello

  It is used by the earlier original installation.

  Make a phone activation, ignore auto guests and brace yourself for a real person explain your situation.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Get the Error Message When you try to reinstall Vista: Windows cannot open the required file: E:\Sources\install.wim

  I'm trying to reinstall windows vista for the following reasons:

  1. I have SQL Server 2008 installed on my computer.  I deleted some files a long time ago and it screwed something and I couldn't reinstall.
  2. I had partitioned my hard drive for vista half and half SuSE and I deleted who and when I did, I think I deleted another partition - my recovery partition (E:\?).
  3. I need to clean my laptop.

  When I try to start the installation of a disk and I put in my product key, I get the following error:

  Windows cannot open the required file E:\Sources\install.wim.  The file does not exist.  Make suure all files required for installation are available, and restart the installation.  Error code: 0 x 80070002.

  Let me know if you have any ideas how I can fix it.  My next step was to recreate this E directory and download the install.wim file and re start the installation.  I could not find the file install.wim well.

  Rob

  Hi Rob,

  I checked the link you provided.  What you downloaded was just the Vista recovery environment.  You cannot actually re - install Vista with that and if you blew your recovery partition unfortunately you may be out of luck.  You blew your partition containing Vista runs so the SFC will be of no help either.  I wish I had better news for you, but I don't see any way o get on without a Vista DVD.  I have good news for you if.  When you get your HP drive if you have problems with the installation, we will be able to help you with that.

  Take care and let us know if you need assistance when the disc arrives. Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!

• On Windows 7, 1334 of the error message when you try to repair XI Acrobat Standard. The software was already installed on my computer so I don't have the installation disc.   Can you please help?

  I have a laptop Windows 7 with Acrobat installed Standard XI.    The program was already installed on my laptop, so I don't have the installation disc.    I'm getting error 1334 and Error 1311 indicating the "file Source not found."    Do you have recommendations for repair?     As a reminder, the software was already installed on my computer so I don't have the installation disc.    Thank you.

  MST can be downloaded from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html, but you may have problems depending on the operating system and if you have a volume license or upgrade. If the download works for you, don't forget to make a backup on another medium for the future.

• Displays the error message when download itunes and other updates, not microsoft... says mode without failure or installer problem

  Error code is displayed. indicates the mode without failure or installation problem, contact shop etc. where purchased.

  Hi PeterLloyd,

  (1) what is the complete error message you receive?

  (2) what version of Windows you are using on the computer?

  (3) updates are you referring?

  Method 1: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 2:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• C:\\Windows\system32\ksproxy.AX error message when you try to use a new webcam with Skype

  I have a new webcam which is recognized by my computer but displays always the followed error message...

  .. If the other is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator for the Publisher of software for support.

  I tried to uninstall and reinstall the webcam and Skype and insured Windows is fully updated. I tried using the disk for the installation of the software and drivers downloadable from the Web site. It's not to do with the firewall with my antiviral product, as I have tested that turn off too. What can I do to get my 'Easy Webcam' SPC230NC Philips to work then?

  Thank you.

  Hello
   
   
  
  1. are you able to use this webcam on other applications?
   
  Method 1.
  I recommend you download and install the PC software and the drivers from the following site.
  http://www.P4C.Philips.com/cgi-bin/dcbint/cpindex.pl?CTN=SPC230NC/27&SLG=en&scy=us&mid=Link_Software
   
  For more information see the articles below:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
   
  For additional help, you can also check with the technical support of Philips.
  http://www.support.Philips.com/support/sms_page.jsp?userCountry=us&userLanguage=en
  
  Method 2.
  If you suspect an activity of virus that I highly recommend to run a Virus Scan online.
   
  Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
   
  b. run the malware removal tool from Microsoft.
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
   
  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Print the error message when you try to print from a Vista network printer

  I have 2 computers and 1 printer. Usually, when I wanted to print computers I unplug the cable to a computer printer and plug it into the other computer. Now, I use a USB switch with computers and a printer plugged into it so I won't have to unplug the cable from a computer and move it to another. The problem is that I get the constant pop-up message that says "Windows - writeback failed. Window could not save all the data for the E:\$mft. The data has been lost.

  What should I do to fix this?

  Thanks in advance,

  Hi Hydnah45,

  ·         When exactly do you get this error?

  ·         You have windows XP INSTALLED on your computer?

  Try these steps if you have windows XP INSTALLED on your computer.

  Step 1

  To resolve this problem, first check whether the feature 'Turn on disk write caching' is lit. If it is enabled, disable it. To do this, follow these steps.

  To disableActivate the disk write cache, follow these steps:

  1. click onStartand then click my computer.

  2. right click on the hard drive, and then clickProperties.

  3. click on thehardware tab.

  4. Click to select the hard drive, and then clickProperties.

  5. click on thepolicies tab.

  6 clear the boxenable the disk write cache , and then click OK.

  7. clickOK to close the disk Local (c) properties dialog box.

  8. Repeat steps 3 through 5 for each hard disk that is installed on your computer

  Step 2

  Make changes in the registry

  1. start the registry editor.

  2. Locate and then click theenablesecuritysignature under the following key value in the registry:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Lanmanserver\Parameters

  3. on theEdit menu, click modify.

  4. in thedata value: box, type 0, and then click OK.

  5. exit the registry editor.

  6. stop and restart the service server,or restart the computer

  Important: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  If you have windows 7 installed on your computer try running printer utility.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  I hope this works.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Driver not installed successfully", the error message when you use the new MP3 player.

  I recently bought a Sony Mp 3 (model NWZ-E384) Player.

  When I connect the USB I get an error message will appear in the lower right corner on the screen saying "driver not installed successfully.

  Why am I seeing this? Better yet, why am I this problem? My previous Sony Mp3 worked fine with Windows 7.

  Is there a round work to install the device driver on my PC?

  Thank you very much

  Ian

  Don't know if this helps Sony - https://ca.en.kb.sony.com/app/answers/detail/a_id/42390/c/65, 67/p/57784,59687,59925,80740 / (from their support pages for the NWZ-E384 - http://esupport.sony.com/CA/p/model-home.pl?mdl=NWZE384&template_id=1®ion_id=3&tab=howto#/howtoTab ).

• HP C5180 AIO memory card reader. Trying to open the memory card, Windows 7 displays the error message "the handle is invalid."

  "Computer" shows the memory network card.  When you try to open it, I get the following error message...

  Location is not available
  Y:\ is not accessible.
  The handle is not valid.

  If I right click the icon and select 'Properties', then the properties of memory card appear properly.

  This memory card and HP C5180 work correctly on a Windows XP computer.

  HP C5180 is connected ethernet.

  You have installed the drivers of http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153481&lc=en&cc=us&dlc=en&lang=en&cc=us