Windows 7 does not install new USB keys

Similar Questions

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Windows does not recognize the USB key.

  For the last few weeks, Windows was not grateful for my USB key.

  I tried 3 Memory Sticks and even my iPod, sync with iTunes.

  When I tried to solve the problems, my devices non-windows alerted saying me that he is unable to solve the problems.

  This means that there is no problem with my devices, but with Windows itself.

  I would be grateful for any suggestion.

  I have a HP Compaq Presario CQ61, which runs on Windows 7.

  Sticks of memory are unrelated to this problem... Youre OS needs to

  have the USB, & its other hardware pc configured with the operating system... If intel pc, based on

  go to intel.com/support/software/drivers

  Use the update utility intel (pc auto scans), or locate it manually. The installation of the chipset

  utility, whats lacking. This installs the controllers USB/network/sound & video

  the operating system, other software is probably due also, as the update of windows

  has not installed.

• Windows does not recognize the USB key for backup

  Windows does not recognize my USB drive for backup. Windows seems to give this option, but requires that I have to use a disc in drive D. How can I change this?

  Original title: Windows 7 backup

  With USB installed & in the office, go in run, type: diskmgmt.msc

  MSC, locate & L.click on hardware, go to actions, all, select: activate

  closing of msc

• Reinstall Windows 7 does not accept the product key

  Just bought a new PC to replace my crashed. Install Windows 7 from the DVD I got for my old PC. It does not accept the product key. Think it's because it was a copy of Windows 7 upgrade. What can I do about this that I can't downgrade to Windows XP. I have the original and the product key for Windows XP disks.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Lite-On ENAU108 CD Burner IT does not recognize the USB key

  Windows Media Player does not recognize the USB drive letter

  Although the Windows Device Manager recognizes it.

  I want to add drive from the device to WMP

  Hello

  1. have you made any hardware changes or software on the computer before this problem?

  2 - is the USB key in Windows Explorer?

  3. you try to transfer music files from the USB key?

  4. what version of Windows Media Player do you use?

  If you use Windows Media Player 11 & try to add media files in Windows Media Player, you can follow these steps.

  a. open the Windows Media Player, click on organize > manage libraries > music.

  b. click Add and navigate to the location where the file is stored in the Windows Explorer.

  
  Reference: Add items to the Windows Media Player library

  Hope the helps of information.
  Please post back and we do know.

• Windows Update does not install SP3 on Windows XP Pro computers

  I have about 400 computers running Windows XP SP2 withIE 6.  It is set to automatic updates on installed every day at 03:00.  For some reason, SP3 is installed automatically never.  If I run the windows update manaully, it offers me to install SP3.  Is it normal?

  SP3 does not install automatically. It's like IE8.

  Perhaps this may also be of interest:

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  TaurArian [MVP] 2005-2010 - Update Services

• Windows Update does not install the updates from 14/04/2009. Error code 80070002.

  I'm running 32-bit Windows Vista Home Premium on a Dell Dimension E520 PC desktop with processor Pentium dual core and 3 GB of RAM.
  Reasonably up-to-date hardware. Well protected and all software security entirely to so far.
  My problem that goes from Windows Update is not install updates from 14/04/2009 and returns the error Code 80070002.
  I followed the advice and went in the Windows Software Distribution folder and remove all the contents of the data store and records downloads and tried again about thirty times now.
  I get regarding the acceptance of the license agreement and clicking on, ok, when Vista dims the screen and asks if I started it and then the error message in Windows Update, saying: "some updates were not installed."
  Is not a computer expert, I guess that what is described in help Windows Update error Code 80070002 is the same as 0 x 80070002 for which I found advice on a Microsoft page to save these commands
  net stop wuauserv
  CD %systemroot%\SoftwareDistribution
  Ren Download.old download
  net start wuauserv
  as a windows batch file and run as administrator.
  I now have a download folder and Download.old folder. Fascinating but no help at all!
  I infer that the numbers of 0x0 are my six error codes failed attempts to install Vista Service Pack 1, a few months ago who always ended up with an unusable computer suspended with a black screen and the white writing showing 46 thousand of 96 thousand file and something, followed by a number of 0x0.
  The only way I could get of these attempts was by booting from the Installation of Vista disk, masking the Service Pack 1 update and using the system restore, but that's another story.
  Have an impact on my current problem, I wonder?
  For absolute clarity are the updates that won't install:
  Explores update for Internet Explore 7 edition (KB963027) 14/04/2009 (Just editing that.) Typed a wrong number in a first time. Sorry).
  Four updates of security for Windows Vista (KB952004) (KB956572) (KB959426) (KB960803)
  Windows Malicious Software Removal Tool - April (KB890830). (I downloaded it manually and run it from my office and we found no problem).
  Update of security for Microsoft Office System 2007 (KB960003)
  Update of security for Microsoft Office Excel 2007 (KB959997).
  I'm at a loss what to try next.
  FYI, I use Uni-bleu Power Suite 2009, McAfee Total Protection and Ad-Aware Anniversary Edition with Ad-Watch Live on.
  I tried to do everything that it with Ad-Aware died, but my hunch is that the problem is in Vista ot the updates themselves.
  I'm quite competent with guests of orders, not to mention manually editing the registry!
  However, any help would be received with gratitude and I guess that if the instructions are evidence of fool I have very carefully follow step by step.

  I have the same symptoms: from a distinct point in time updates of windows works more and every time returned the error code 80070002.
  After a few hours, I found the solution: sfc/scannow reported the wuauclt.exe file.
  And the reason was: McAfee virusscan put this file in quarantine. He is falsely W32/Generic.worm.aa in there.
  Restore this file from the GUI of McAfee completely solved this problem.

• Windows 7 does not recognize the USB 32 GB

  I have a Sandisk Cruzer 32 GB USB stick key, as I would like to transfer a single file of 9 GB between my two laptops.

  The memory stick appears and works very well on a laptop (Acer) - while working.  However it does not appear on my other laptop (Compaq) after plugging him.  Laptop computers are Windows 7 Home Premium 64-bit, both use the NTFS system and the memory stick was formatted in this way also.

  I used the disk on the Compaq Management and (after a while) the memory stick appears.  In order to avoid any conflict between the drive letters, I have re-assigned to the M: drive and that seemed to work.  However, it does not ALWAYS appear in the Windows Explorer, so I can't transfer any files to it!

  Any help would be appreciated!

  Thank you.

  Hello Stephen,

  When looking for hard drives, USB flash drives or CDs and readers of DVD using Windows Explorer, you may notice that some readers are not in Windows Explorer or the drive may disappear after a short period, or when Windows resumes or Hibernation. This may be caused by the following:

  • Your player does not have a drive letter assigned in disk management
  • The player can be disabled or offline
  • Your USB driver is maybe corrupted
  • Damaged registry keys may be the cause of problems with the connection to your CD-ROM or DVD drive
  1. When you connect other USB devices on the computer, they work well?
  2. What is the status of the Sandisk Cruzer 32 GB USB drive in the Device Manager?
  3. You have Kies installed on the computer?

  Reference:

  Cruzer flash NOT detected by Windows PC drive

  Refer also to the suggestion of Karena R responded on December 28, 2010

  Please return with the necessary details so that we can help you further.

• Windows 8 does not recognize my USB hard drive after an unsuccessful backup.

  Separated from this thread.

  tried both methods. Unfortunately does not work...

  Hi Roby,

  Thank you for the update on the related question.

  This issue may be caused if one of the many reasons as USB driver are corrupt or unstable PC requires an update for problems that could conflict with an external USB hard disk, Windows may be missing other problems hardware or software updates.

  Try these methods and check.

  Method 1: Uninstall and reinstall the USB controllers.

  Try reinstalling the Device Manager USB controllers and check.

  Uninstall and reinstall the USB controllers will not affect the USB port, as when restarting the computer/laptop as it gets reinstalled automatically.

  1. Press key Windows + X on the keyboard.
  2. Go to device Manager.
  3. Expand the Controllers USB, click drivers.
  4. Click Properties, click the Uninstall tab.
  5. Click OK.

  If the problem persists, follow method 2.

  Method 2:

  See the Microsoft support article and follow the steps.

  Install USB 3.0 and other USB devices

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• activation of Windows 8 does not accept my product key

  Hello

  I bought a new hard drive and after installing Windows 8, I try to activate with my product key, but it does not accept.
  I tried calling support and when I go through the automated process it asks installation identification numbers that I don't have.
  Please can someone help?
  
  Thank you
  Graham

  Try to talk to a live representative, you will need to do during the week:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• HP pavilion x 360-11-n011si: BIOS does not boot form USB key to CD USB even when the value of UEFI to allow

  Hi all

  I have a laptop beatsaudio that has been upgraded to win10: the HARD drive failed and I replaced it with an SSD.

  The BIOS does not allow to boot from USB USB even when CD install to UEFI key.

  Any help will be appreciated

  Hello

  I realized a work around:

  Secure boot off

  Legacy support on

  and here's the big one

  Boot HDD in legacy should be last on the list

  The BIOS does not recognize that there is no. OS installed and continue to the next boot device as any other bios hp good done, it just stops putting so he can finally boot USB.

  Thank you

• Computer Windows Vista does not recognize the USB mouse

  Original title: does not recognize usb devices... Im trying to use the mouse... got a new mouse... still does not recognize it

  worked but stopped, got a new mouse and still does not recognize it. I really need it... help please

  Hello

  
  1. do you get an error message?
  2. would either not detected other USB devices in the same port?
  
  Method 1: perform the steps in the article mentioned below and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  
  Method 2: run the Fixit and see if the problem is resolved.
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 3: update the chipset drivers and see if the problem occurs.
  Note: you must contact the manufacturer of the computer to update the chipset driver.
  
  Hope this information helps.

• Windows 8 does not accept the product key

  About 3 years ago I bought Windows 8 Pro (64-bit). In the meantime, I reinstalled the system a good several times because of some strange accidents (see my other question). Now, I tried to reinstall it again, until Windows 10 comes out, but activation does not accept the key. I read on other forums that this is probably beyond the limit of activations.

  Is there a way to reset the key or am I forced to buy a second?

  Thank you

  Mario

  Hello Mario,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you made any hardware or software changes to the Surface before the show?
  2. do you receive a code or a message when you say, 'activation does not accept the key?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because corrupt Windows activation files or parameters.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  To activate the phone and check.
  Refer to this article:
  Get help from Microsoft Windows activation
  https://support.Microsoft.com/en-us/KB/950929

  If this does not help, use method 2.

  Method 2:
  Please refer to the suggestions of nobody611 responded on 4 December 2012 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-activation-after-clean-install-does-not/01047349-516A-485f-b88d-68c1c9ac0e9c

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows Vista does not recognize external USB 260 GB HARD drive

  I have a 260 GB Seagate external hard drive, a laptop Toshiba satellite and Windows Vista Basic.

  The same Windows usually choose the hard drive when I plug it, it does not appear in Device Manager and in disk management, the only way I can get it to work is to uninstall all the USB root hub and then restart the computer, and then reinstall the USB root hub and plug my hard drive.

  When windows finally recognizes him, the only way to find the driver must choose c:\ manually and there's the search for the computer.
  Works for the time that I have the computer hard disk, but when I stopped it, next time I use the computer, I'm having exactly the same problem.

  I tried to remove the hard drive safely and then close the computer and by him plugging back in after windows has loaded, I tired it connected from the computer and tried to close the computer with connected.

  None of these work.
  Can someone help me please?

  Strange?  :|
  But what need s say Microsoft Windows so I don't expect 100% without bug OS ;)

  Disconnect the USB HDD and remove all the USB ports and Device Manager USB controllers. After restarting again the OS should reinstall ports. Then you could try to reconnect the HARD drive.