Windows 7 does not recognize my Tascam FW-1884, not a legacy device. Get the latest updates of the firmware & drivers

Similar Questions

• Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  I do a backup of the 'Normal' at the beginning of the month.  Then, at the end of the first week, I do a "Differential" backup (using the same "backup job" but change to type "Incremental".)

  Well the difference is huge and to study, I see that a lot of files that I don't know that I didn't take the week since the 'Normal' backup have the Archive attribute set.

  Is the 'Normal' compensation not the bit mode backup of archive?  Another thing would be randomly set the attributes to archive?  Is there a ghost in the machine?  Inquiring minds want to know.

  Hello

  Differential backup marks files as having been backed up (in other words, archive attribute is not cleared). This is normal.

  For more information please visit:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/types_of_backup.mspx?mfr=true
  http://msdn.Microsoft.com/en-us/library/aa174458 (SQL.80) .aspx
  http://msdn.Microsoft.com/en-us/library/ms345448.aspx

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• my windows firewall does not start and I get a erroe code 5, can someone help me

  my windows firewall does not start and I get a erroe code 5, can someone help me

  Hello

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

  Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

  Method 2.

  Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

• first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»

  first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»   Installation in German on WIN7 64 bit professional, Samsung SSD. What can I do to run this program?

  Jürgen Freund

  First 12 items on Window 7 64-bit. What card card video/graphic fact your computer use - AMD Radeon?

  I found this YouTube video about the error 126 precisely to solve the problem.

  How to fix the ERROR 126 when you open programs OpenGL - YouTube

  The link was provided in an old thread from 2013 here by the ID danneomarre (see post 6 of the next thread)

  LoadLibrary failed with error 126: could not find the necessary

  Please let us know if it worked for you.

  Thank you.

  RTA

  Add on... When everything is OK and work, update the 12 to 12.1 update using Help Menu/implementation of an open project.

• Vista 64-bit now I changed my OS 32-bit now my web cam does not work, tried to get the drivers from dell but did not help

  of the vista 64-bit now, I changed my OS to Vista 32 bit , now my web cam does not work, tried to get the drivers from dell, but they are not available there. My laptop is studio-1537... Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  I check your firewall settings to see if it can cause a conflict with the season chat software.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lighroom does not open and I get the following message "this beta version of lightroom has expired.

  Lighroom does not open and I get the following message "this beta version of lightroom has expired. Help, please

  Thank you for your help.  I upgraded to LR4 and everything is now sorted (I hope)

  All the best

  Serena

  (details deleted by the moderator)

• Why windows search does not return a result when the file is of course in the folder my documents?

  Hello

  file search: KeyScrambler_Setup.exe
  search string: key - would find the above file
  search string: scrambler - cannot find the file!

  now I'm very confused. can someone pls tell me why? then I could correctly search and find my next record!

  Thank you! any help is appreciated!

  BTW I use win vista Home premium 32.

  and I tried the advanced search and selecting search loc: informed everywhere and all the other search criteria.

  Hello

  Windows Search does not work or research are slower
  http://support.Microsoft.com/GP/windows_search

  Troubleshooting Windows Vista search & indexing errors
  http://www.WinVistaClub.com/T24.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• my window media does not play wen I insert the dvd disc it say that a compatiable device is not install please tell me what I need to do thanks.

  Hello my pblem is that my Windows media player does not play wen I insert my dvd disc it say that a compatiable device is not installed please help me thanks in advance

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows XP does not allow applications to use the virtual serial (COM) Ports

  Operating system: Windows XP Professional version 2002 Service Pack 3

  I want to use some applications to control virtual serial (COM) on a device of PEARL IOLAN STS8 D/TruePort ports in Windows XP Professional SP3. When I configure the IOLAN/TruePort I see the COM ports in the Windows Device Manager and I am able to configure my applications to use ports.  However, when applications try to open the serial ports, I get an error saying that the port is already in use or does not exist.

  I tried various alternatives to remove/re-add the ports 'in use' in Windows before you configure IOLAN/TruePort and applications. This (sometimes) allows me to use the ports but if the PC is turned off later and rebooted the problem reappears.

  Is there a reliable way to create and use virtual COM ports in Windows XP?

  The IOLAN/TruePort Pearl versions are:

  V4.3 Device Manager
  Firmware TruePort 6.4

  Hello

   

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

   

  I hope this helps!

• Windows does not start. To get the message of partition\windows of rdisk.

  Original title: cannot start Windows XP

  Hi there everyone,

  The other day I uninstalled a few items that were cluttering up my old Dell Inspiron 6000 (Norton, Nero, etc.).
  When I restarted the computer, it brings me to a screen that provides options
  -Safe Mode
  -Safe Mode w / command prompt
  -Safe Mode w / networking
  -Last known good Config
  -Start Windows normally
  No matter which I choose, the computer crashes.
  If I take all the options mode without failure of the text appears below in regards to the multi discs rdisk partition\windows... and then a few .dll, .nls and .sys files.
  I tried to boot from a backup disk, but does not (I changed the BIOS settings to boot from the disc), but it always brings me to the command prompt and nothing works from there. I wonder if the startup disk is funked up? I have XP on a desktop home computer so maybe I should do another startup disc and try again?
  I tried to work my way through some of the KB articles on the site (via the command prompt sys restore failed).
  I hope I've provided enough information and I would be very grateful of any help.
  Thank you
  GM

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

• Windows Mail does not open attachments, cannot open the PDF, JPEG attachments.

  June 29, 2009
  PROBLEM OPENING JPEG AND PDF ATTACHMENTS TO EMAILS: CANNOT RUN COMMAND.  GET HELP FROM COMMUNITIES.

  I went to communities and found this answer:

  FIX ATTEMPT N ° 1

  > VISTA PROBLEM
  > To correct pass them: -.
  > Windows Mail
  > Tools
  > Options
  > Security
  > 2nd box should be empty (do not allow any parts attached to save or open
  (> likely to contain a virus)
  > Apparently things change on the updates we do not!
  > If it returns checkbox to display the iof has become checked again, otherwise get out
  > of windows mail, then go in again and it should be fine.

  I have done this and it does not solve the problem.

  ATTEMPT TO FIX N ° 2

  So I went to my Antivirus, Avira Antivirus program.
  and I changed:

  Configuration > CUSTODY > SCAN when READING and WRITING > USE FILE EXTENSIONS LIST >

  And here, in the list of extensions of files to analyze and prevent, I deleted the list: JPEG, JPG, PDF.

  This does not solve the problem.

  FIXING NO. 3

  I also run the new MICROSOFT SECURITY ESSENTIALS BETA.

  went to MICROSOFT SECURITY ESSENTIALS (BETA). SETTINGS > EXCLUDE FILE TYPES > and added *.jpeg and *.pdf

  There was no change, when I tried to open the PDF attachment, I always received: "command failed implementation.

  FIXING NO. 4

  (By the way, I have nothing better to do in my office on Monday morning held that fix this bug for MSFT).

  I removed IE 8 on my system and actually removed all IE from my system, I'll stick with Mozilla.

  No change.

  CORRECTION ATTEMPT N ° 5

  I finally found an electronic bulletin board and followed the suggestions to save the file to my desktop and then
  Open with Adobe and it worked well.

  WHY CAN'T I OPEN JUST JOINED MS MAIL?

  OK, I found another thread with an answer that works.

  Why this answer doesn't work, I have idea of NF.

  Instead of opening the e-mail from a shortcut program, on the desktop and open the e-mail program on the start menu to:

  Go to: all programs, then select Microsoft Mail.

  Then the attachments will be opened.

  It worked for me, it's worth a try.

  Good luck to you.  I know that's no fun.

• Windows 7 does not remember a password on the LAN

  At home, we have two laptops running (1) Windows 7 Home Premium, and Windows 7 Professional (2). There is also a desktop PC running Windows XP Professional, and Windows 7. Are all the facilities of Windows 7 SP1 and XP SP3 installation. Three of the PC is connected to an Ethernet 100 Mbps and the Netgear DGN2200 ADSL router, a WIndows 7 laptop is connected via a wireless connection to the Netgear router. The router's DHCP server, gateway and Wi - Fi access point on the network.

  To account for Windows XP, we have defined the same workgroup on all PCs. The network is configured as a home network in Windows 7.  The same users are loaded on all PCs and the respective users passwords are the same on all PCs.

  Carnets save everyday on the Windows 7 Desktop on the network.

  The problem is with the Windows 7 Pro notebook. When you try to access the Windows 7 PC desktop, it requires a username and password. When the user name and password has been entered, the "Remember password" box is checked. The PC can then access the shared files on the selected computer. When Windows Explorer is running, I can browse the files on the other PC, but if Windows Explorer is closed and opened later, the same PC requires a user name and password once again, despite having chosen to remember the password.

  While in this case, I can access to the desktop of Windows 7 from the other laptop Windows 7 without problem. He remembers the password that gave you a few months ago.

  I do not allow the network connection to be turned off to save power to prevent this as a reason for the problem, but it does not solve it.

  You have any suggestions to try?

  Hello

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you are having problems with getting invited him to enter the password after clicking on memorize the password.

  Check the steps suggested by Gokul T from the link below and cehck.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/username-and-password-will-not-get-stored-for-my/e712b630-e737-4D60-8a29-977daf6ecac0

  Meet us if you encounter any problems with remembering the word password or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Windows Vista does not start after you use the Hp Recovery Manager. What should I do?

  I used Recovery Manager to reinstall Windows Vista Basic 32-bit. During installation, it shows 0% completion although at the end it says everything is ok. After clicking on the button finish, he starts up the Recovery Manager again asking if I want to recover Windows. If I choose the Cancel button it restarts with the same Recovery Manager screen. What can I do?

  You can call HP technical support at 1-800-474-6836. Or you can give your product number, not the serial number, and I'll try to send you the link to order yourself.

• Windows Installer does not work, and niether do the Windows updates.

  OK, so I recently installed Advanced System Care for a purchase price of 12.28.  After the installation he did in fact speed up my computer but now I cannot make the updates for windows update and I access windows install.  I went through the solutions on "windows setup will not work", and nothing works.  Help, please.

  Alissa.

  Hey alissa,.

  Disable Advanced System Care and see if the update works. If this works, contact the software provider for help on how to make it work with updates.

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem. Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP does not work when I replace the hard drive or motherboard... ?

  How can I make winxp work if I replace the motherboard or my HARD drive;
  The question another way: I want to install Windows XP on the motherboard so I'll have to take the hard drive and connect it to another motherboard... How can I make because it open of course used... It is is not need any file b4 replacing or anything?

  That may depend on whether you have a copy of Windows XP comes with your PC, to which it might be bios locked the card mother origonal.
  If you have a retail version of Windows XP, you must perform a repair installation and install the new drivers of motherboard
  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If you simply replace the hard drive, you reinstall Windows XP on the new drive, if it is a sata drive, it might be necessary to use the F6 option to install the drivers for the controller sata disks, at the beginning of the installation

• Windows Mail does not send to Mail in the sent folder

  This morning, my Windows Mail is no longer my e-mails sent in the sent items folder. E-mail send OK, and I'm getting the small arrow icon purple on the projection of graphics Inbox mail I answered. It is simply not save copies of the sent emails.

  To my knowledge, nothing has changed since yesterday and I have installed any new software. I checked the settings of e-mail Options and is checked for "backup copy of messages sent in the sent items folder. Just to be sure I unchecked, then checked again and press on apply, but it did not help.

  Any thoughts? I REALLY need copies of all of my sent mail. Is there a maximum number of sent messages, I can save maybe?

  (BTW - I'm on Vista Ultimate Edition with Service Pack 2. I use AVG Free for my anti-virus, but nothing has changed there either, as far as I know.)

  Before going through the stages of the reconstruction of the base of messages, try to repair the database with my Windows Mail utility and see if that fixes the problem.  Seewww.oehelp.com/WMUtil/ also make sure AVG is not scan e-mail because that could be the culprit of this issue.  See www.oehelp.com/OETips.aspx#3
   
  Steve
   
  "Venture55" wrote in message News: 1481fb3d-33e7-4258-a505-3cbbd45ecdb1...

  This morning, my Windows Mail is no longer my e-mails sent in the sent items folder. E-mail send OK, and I'm getting the small arrow icon purple on the projection of graphics Inbox mail I answered. It is simply not save copies of the sent emails.

  To my knowledge, nothing has changed since yesterday and I have installed any new software. I checked the settings of e-mail Options and is checked for "backup copy of messages sent in the sent items folder. Just to be sure I unchecked, then checked again and press on apply, but it did not help.

  Any thoughts? I REALLY need copies of all of my sent mail. Is there a maximum number of sent messages, I can save maybe?

  (BTW - I'm on Vista Ultimate Edition with Service Pack 2. I use AVG Free for my anti-virus, but nothing has changed there either, as far as I know.)