Windows 7 does not see my Ultrabook XPS14 SSD

Similar Questions

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

  I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

  Check that the drive appears in Device Manager.

  If so, go to disk management and assign a drive letter.

• Research of start Windows 7 does not see outlook and onenote items

  I use office 2010 and windows 7 Enterprise.    When you used to search in the start bar the results it would display would contain items outlook and onenote but it is no longer made.  It contains only the elements with the words to search for in the name of the file.

  If however I chose see more results while all outlook and onenote items are there.  It feels like a framework or something somewhere has changed and now the start bar search does not bother to look in the index.
  I made sure that all the search options in the start bar properties tab are on and working, but still no results.
  Anyone got any ideas?

  Hello

  Work on a domain environment?

  You can try the following methods and check if it solves the problem:

  Method 1:

  You can run the fixit from the following link and check if it makes a difference:

  Difficulty of Windows Desktop Search when it hangs or no display of results

  http://support.Microsoft.com/mats/windows_search/en-us

  Method 2:

  Try the steps from the following link and check:

  The box "search programs and files" does not correctly display the search results in Windows 7 and Windows 2008 R2

  http://support.Microsoft.com/kb/977380

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  You can also view the following link to see if it works:

  Searching in Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/searching-in-Windows-frequently-asked-questions

  Let us know if it helps!

• Windows Vista does not see my Canon G12 digital camera

  I tried to upload photos today of my Canon G11 digital camera and has encountered a problem.
  I used this camera and other cameras on this computer before and had no problem connecting to the cameras.  Today, I'm having a problem.
  (1) I plug in the camera and a small window at the bottom right of my screen jumps to the top of the poster "install device driver".
  "(2)"new hardware found"window that reads,".
  Windows needs to install driver software for Canon digital camera»
  There are three choices:

  • Locate and install driver software
  • Ask me later
  • Do not show the message for this device

  (3) I click "locate and install driver software" and I get a updated driver software - error of digital Canon camera that reads, "Windows has encountered a problem installing the software driver for your device."  Windows found driver software for your device but encountered an error trying to install it.
  Digital camera
  An error occurred during the installation of the device:
  Cannot install the driver because he is only not digitally signed properly.  Contact your hardware vendor. »

  I tried to reboot several times, and I tried to uninstall the device from Device Manager and reinstall the device. None of these worked.  |

  AFAIK there are no drivers for this device on the Canon website.  How can I get my Windows Vista computer to recognize my Canon G11 camera?

  Thank you
  John

  a screen pops up announcing that a new device has been detected.

  The drivers for this device are not installed. (Code 28)
  To reinstall the drivers for this device, click on reinstall.

  Yes there is no drivers for the device. The software supplied with the camera must be installed. The camera window should open when the camera is connected to the computer. Try using another USB port or use another cable, it can go bad too.

  In the Device Manager expand Universal Serial Bus controllers, search for the connected camera or something as a mass storage device. Right click above and uninstall, then restart, it needs to be reinstalled. If does not uninstall everything under USB controllers and then restart your computer.

• Windows 7 does not see added internal hard drive

  I installed an internal hard drive 1 TB on a Windows 7 using SATA system.  Device Manager sees the drive, but Windows does not.  So I can't access the drive. How can I get Windows to use this hard disk (disk 1) to be the image of the disk system 0?

  Thank you

  Probably should have Setup no matter what RAID before installation.  Thinking that can be a destructive thing.  Not that I'm a great believer in RAID1 arrays (mirror) - I'm not.  I'd rather have real backups - external backups.

  Usually a RAID1 will help only if the first hard drive die an immediate death.  None of the defective areas, no viruses, no random deletion of files.  Why?  Because a HARDWARE RAID1 is an instant copy of everything that happens on the first hard drive.  If you clear hundreds of files - they are on both.  A virus corrupts the things - the other disc is in place.  Form data and scramble of bad sectors - well, look!

  I have a storage attached network device I backup on an eSATA hanging from it it stores up to another network and storage I do more selective backups to as a backup for my saved backups.  Internal - nothing.  Well, I guess that the restoration of the system and version control integrated with Windows 7...

• Windows 7 does not see the xp on network machines

  We are a store Dell running XP Pro on peer-to-peer networks... deployment of Windows 7 Pro workstations and laptops. Out-of-the-box, we put it sharing, discovery, working group; etc. However, some of the machines Win 7 do not see network XP machines and thus cannot use the graphical interface to map to different files and resources. You can their ping, set using "Net Use" or "Add a network location" or "Connect Player" as long as you know the complete path (ie: \\server\server_share\home\bill\cad\cnc.) But you can't see them in the network window to map the drive to records letters. I have studied this issue, has visited many forums and talked to many other tech all with the same question. The conclusion seems to be because it is a Win 7 problem not addressed XP came out. So the current thinking seems to be to use the commands Net use in an autoexec.bat file. So to use the latest version of Windows with XP, we need to use commands BACK maps automatically records. A huge advances in technology. Really? Tell us we're wrong and there is an answer?

  Hello

  Your question of Windows7 is better suited in the TechNet forums. Please post your question in the TechNet forums.
  You can post your request here on TechNet community that focuses on issues such as
  http://social.technet.Microsoft.com/forums/en/categories

  I hope this helps.

• LR 5 / 10 Windows - import does not see my photos directory

  Hey people,

  LR 5 Windows 10.  It worked great until a recent windows update.  Now I can't see my photos directory in the import dialog box.  I see the drive the files are, but can not see the directory of real photos.

  Another bit of clarifying information: when windows updated, he kept an account of windows to create onilne.  This account creates a new set of home directories that appear to be linked to the previous windows user name file structure 7. Something seems to have changed which prevents LR to see all the files on the disc.

  Has anyone else seen elsewhere?

  Thank you!!

  I do not think that it has nothing to do with an account of the window (note that was never an obligation) online, but more with the permissions.

  The test is to run Lightroom as administrator or check that your has UID of full access to these directories through the Properties dialog box.

  My guess is that previously, you used only access I want to who had administrative access and is not a new one, that you created.

• Windows 8 does not "see" the functions on my Canon MF4450 scanner

  Printer works with Windows 8, but not the scanner function.

  The problem is that it will work for a while, but then it gives the same error.  It is as if Windows 8 is uninstalled or damage something.

• Portege M400 - Windows 7 does not see HARD drive

  Hi, I have the problem, I am trying to install Windows 7 on my M400, but he didn't see the hard drive.
  The hard drive is surly ok, ' couse I tested it in the other netbook, I can see it in the BIOS, but any program installation can not.

  (I tried both Ubuntu and XP Tablet Edition)

  Hi Radzik,

  I think that Windows doesn't see the drive HARD due missing RAID drivers Windows needs of these RAID drivers before you can install it because it doesn t contain these drivers for the disk HARD is not recognized. You can download the RAID driver from Toshiba Web site.

  You can then create a new installation disc using nLite with drivers or copy the drivers on an external floppy drive. Start Windows XP after you press F6 to load drivers from floppy drive.

  Check this box!

• Windows 7 does not see some games or DVD discs in my DVD - RW drive

  I'm using Windows 7 Home Edition premium for my office, and all of a sudden she refuses to see my game or DVD discs when I put them in the drive. He will see my DVD - RW discs, but nothing else. The games I ran before with no problem at all, and drives that I'm trying will play fine on my Windows XP laptop, so I'm not sure what has changed to make it act like this.

  It looked like from this, after that I burned a disc of pictures of family once, but I'm not positive.

  I tried to uninstall the drivers for the DVD - RW, and reinstall, I don't know what else to do.

  Hi Emiley Tomsen,

  Please return to the article below and review the troubleshooting I would fix it myself :

  http://support.Microsoft.com/kb/982116

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 does not see SATA drive

  I just upgraded from Windows XP to Windows 7 and now cannot access the SATA drive that I use for storage. I desperately need help to access this drive.

  Any help will be appreciated.

  I've seen suggestions on the use of upgrade instead of the custom installation, but upgrade XP to 7 is not available.

  It doesn't matter anymore that I managed to blow a capacitor on the motherboard and had to replace the guts of the machine. The new motherboard had no problem see the SATA drive. Of course, he can't see that the IDE drives so I traded one problem for another.

  With all this, I made a whole new computer, which I'm sure that will soon show it's own set of problems.

  Thanks for the help. And you can mark this resolved.

• Pavlion DV7-6166: I have a dv7-6166 with a truevision webcam which windows 10 does not see

  I have a Povlion DV7-6166 the webcaam never worked I got this computer I just up dated to windows 10. The computer doesnot see the webcam I'm looking for a driver or help getting the webcam works, I also down loaded youcam. When I go into the Device Manager webcam isn't here. The webcam is a truevision webcam.

  Thank you

  Kaycee801

  Kaycee801 wrote:
  

  I have a Povlion DV7-6166 the webcaam never worked I got this computer I just up dated to windows 10. The computer doesnot see the webcam I'm looking for a driver or help getting the webcam works, I also down loaded youcam. When I go into the Device Manager webcam isn't here. The webcam is a truevision webcam.

  Thank you

  Kaycee801

  So since when you bought it-the webcam never worked? If that were the case then you should have returned or a replacement when you discovered it? Now if it concerns the guarantee then you will have to pay for repair or find the part and replace the webcam yourself or have the computer shop to do.