Windows 8 does not see the hard drive on the Satellite A200
Windows 8 does not see the hard drive on the A200.
How to install it?
S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
The HARD drive is visible in the BIOS?
Do you use the original disc from Microsoft of Windows 8?
Tags: Toshiba
Similar Questions
-
Original title: Signature Collision?
I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.
Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision
Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).
I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.
Can anyone help?
Thank you
Comatose13Hello Comatose13,
There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.
http://support.Microsoft.com/kb/330140
Bobby
-
I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.
Check that the drive appears in Device Manager.
If so, go to disk management and assign a drive letter.
-
Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s
Hello
I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.
Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.
Hello
The CD/DVD drive needs no special drivers!
Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)Simply said, the Vista should recognize the drive without any problems.
A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?
There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
It of necessary to update the registry entry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}1. click on the start menu.
2. If it is a Vista machine in the search box type regedit without quotes.
3. look for the registry key mentioned above.
4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
5. restart Windows.
6 let me know if it works. -
Windows 7 does not recognize external hard drive after the reboot
I just bought a WD external hard drive. I plugged in the USB port and automatically loaded everthing. I even registered the product. Then I was told that there was an update to the external hard drive. I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive. I had another hard drive that I used where Windows 7 does not recognize it either? Is it some sort of security setting, I need to adjust on Windows 7 64 bit? Please notify.
Check if the hard drive is assigned to a drive letter in disk management.
Click Start, right click on computer
Click on management of
Expand disk management
Select your external hard drive if its posted here
Make a right click paths and change drive letter
Restart your computer, open the computer in the start menu and see if it shows then.
Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
installed the new hard drive in my compaq lap top, started the professional windows installation and stops because it cannot find the hard drive. It is in the bios and has passed the tests. My lap top has only a cd/dvd drive, a floppy drive. Not knowing what to do.
It is probably because you have a hard drive Serial ATA (SATA) in your computer. These drives did not exist when Windows XP came out and so no drivers for this type of disc can be found in a regular Windows XP don't install. Windows makes allowances for that by inviting you to press the "F6" key at the beginning of the installation process, but then you must provide the SATA drivers diskette (no other medium will do).
"Limited OEM driver support is available with F6 during installation of Windows XP and Windows Server 2003"
<>http://support.Microsoft.com/kb/314859 >There, several articles that explain how to install XP on a SATA drive without needing a disk. Here are a couple of them:
"Installing Windows XP with AHCI/RAID F6 of USB drivers only"
<>http://www.Prime-expert.com/articles/B02/installing-Windows-XP-with-F6-AHCI-RAID-drivers-from-USB-only.php >"How to install XP on a SATA HARD drive without a floppy for a laptop drive"
<>http://www.ehow.com/how_7395338_install-HDD-floppy-drive-notebook.html >HTH,
JW -
Windows XP does not start, no hard drive error
I have windows XP installed on my hard drive of 160 GB WD Scorpio Blue PATA on a DELL Latitude D600. One day, I wake up and my laptop does not start. My computer starts up, leaves POST, but the hard drive does not start. He's right there. I try pressing the buttons but it starts a sound signal, so I have to turn it off. Normally, if there is no device that my computer can boot from it displays something along the lines, "no main boot device found. Press F1 to retry boot or F2 to enter the configuration utility. "but the screen does not show anything.I ran chkdisk and a number of other diagnostic tools on the hard drive, but nothing helped. I have Ubuntu on a USB key and with him, I can access the files on the hard drive - all files are intact, and I can read/write without problems. It just does not start.How would I go about fixing this? Any help is appreciated. It is the third hard drive that has failed inside my D600 (my second WD). I've had enough of this!Try to use the last good known Configuration:
http://support.Microsoft.com/kb/307852
and see if that clears things up to the top.
Hope this helps
Post back if necessary
____________________
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Managing disks in Windows 7 does not recognize external hard drive
It is a recent event. I backed up my computer only 45 days ago and it worked Ok. The same external drive has no problems with your Windows XP desktop.
No other USB devices is facing this problem.
Device Manager identifies the mass storage device (WD1140), as well as the USB controller.
This utility cannot sort.
It is not possible to change/assignment of a new letter to the reader as disk management does not identify her. I also tried to use the command-line (list disk)... the only disc that displayed is internal.I tried to change the USB port, without result.
The operating system is Windows 7 Starter.Hello Cristian,
I appreciate the efforts to solve the problem. We would like to know the following information form you for help to come.
(1) what store did you run to fix the problem?
(2) you have any software from third-party security installed on your computer?
(3) what is the brand and model of your computer?
You could address this issue due to a hardware conflict or if the external hard drive that you are trying to connect has virus. Prior to the resolution problems make sure that you have installed all Windows updates. Follow the steps below to solve the problem.
Method 1: Run hardware and troubleshooting utility device.
Connect the external hard drive to your computer, and then run the troubleshooter below.
Open the hardware and devices troubleshooter.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2: Reinstall the USB controllers.
You mentioned that another that this device, all other devices are detected, follow the steps to make sure that you have the latest USB drivers. This method addresses the steps where the USB driver currently loaded became unstable or corrupted.
(a) click Start, type device in the area Manager Search , then click on the peripheral Manager.
(b) expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.
(c) when completed, restart your computer. Your USB controllers will automatically install.
Method 3: Run Microsoft Safety Scanner.
I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
Write to us at the State of the question. If you need additional assistance, we will be happy to help you.
-
Installing Windows 8 does not detect my hard drive!
Hi all! I recently installed a new copy of Windows XP on my computer to Windows 7 and now I would like to install Windows 8. I have no viruses on the Windows XP Machine, then Yes. I boot on my CD of Windows 8 and when it comes to the part where you want to install windows my hard drive is not detected... Strange... Whenever I installed a new copy of windows I've never had this problem... Instead, I see "Boot: X" and my installation disk. " PleaseHELP!
Try the following
Boot from the DVD Windows 8
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)
Press SHIFT + F10 from your keyboard
type the following commands
DISKPART
Press enter
the list volume
Next, you select the volume where you want to install Windows 7
Type: select disk #.
# represents the number of the volume
Type: clean
convert mbr
create the primary partition
assets
format fs = ntfs quick
output
output
-
Windows 7 does not recognize my hard drive
I took my Toshiba drive of my previous PC running Windows Vista, put it into a Dynamode pregnant and now Windows 7 wont recognize - constantly asking me to re - format the drive.
Some utilities recognize and some say corrupted file or you save to disk
Hi Richard,
You connect it as an additional drive or the drive?
Try to modify the boot menu in the BIOS to get it detected. Check the manual for how BIOS works in the computer. See the methods to solve the problem of detection of material:
Method 1: Run the fixit:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/
Method 2: Check the status of the device in disk management.
Disk Manager is a utility that manages the system disks and the volumes or partitions contained. With disk management. You can extend the disk, reducing the drive, create other partitions, delete partitions, change the drive letter, among other things, all in one tool, and better, by using the system tool.
Open Windows 7 or Windows Vista Start menu.
In the Find box type diskmgmt.msc, type command then the file will appear in the box, simply click on the file to open the tool.
Let us know if you need more assistance. We will be happy to help you further.
-
Windows 7 does not see the xp on network machines
We are a store Dell running XP Pro on peer-to-peer networks... deployment of Windows 7 Pro workstations and laptops. Out-of-the-box, we put it sharing, discovery, working group; etc. However, some of the machines Win 7 do not see network XP machines and thus cannot use the graphical interface to map to different files and resources. You can their ping, set using "Net Use" or "Add a network location" or "Connect Player" as long as you know the complete path (ie: \\server\server_share\home\bill\cad\cnc.) But you can't see them in the network window to map the drive to records letters. I have studied this issue, has visited many forums and talked to many other tech all with the same question. The conclusion seems to be because it is a Win 7 problem not addressed XP came out. So the current thinking seems to be to use the commands Net use in an autoexec.bat file. So to use the latest version of Windows with XP, we need to use commands BACK maps automatically records. A huge advances in technology. Really? Tell us we're wrong and there is an answer?
Hello
Your question of Windows7 is better suited in the TechNet forums. Please post your question in the TechNet forums.
You can post your request here on TechNet community that focuses on issues such as
http://social.technet.Microsoft.com/forums/en/categoriesI hope this helps.
-
Windows 8 does not "see" the functions on my Canon MF4450 scanner
Printer works with Windows 8, but not the scanner function.
The problem is that it will work for a while, but then it gives the same error. It is as if Windows 8 is uninstalled or damage something.
-
system does not see the hard drives as P6000 Windows 7 Pro 64-bit
PC is a little more than a year. About 2 months after installation disk c crashed. Replaced HP drive.
Customer said that she had problems starting and kept restarting. He ran chkdsk and hooked up to 36%
Now the system does not see the drive, but he sees no RAM, etc.
Anyone know what causes this?
Can what information I give to help troubleshooting?
Thank you!
Hello:
Try resetting the CMOS.
If this does not work, I would say that the drive controller in the motherboard is dead.
Clearing CMOS -
Have a lenovo t60 disk opportunity was wiped out when trying to install XP Pro, I get message windows does not see the hard drive, but he sees the laptop.
If its SATA you need SATA drivers to install. Since the XP CD doesn't have the SATA drivers on it
Unless you disable the AHCI in the BIOS. Or their wake.
Or get the SATA drivers. Check out them on diskette, press F6 during installation and then add them.
-
Portege M400: Windows XP does not recognize the 160 GB HARD drive
Hello
I have a Toshiba Portege M400 with Windows XP Tablet Edition. Now, I bought a new 160 GB drive. This disk can be recognized within the location Phase Installation of XP. Do I need a new driver?
Best regards
Karl Weber
Hello
You have to install and include the Portege M400 RAID drivers.
It's a bit confusing because little protégé M400 does not support 2 HARD drive, but the RAID driver is required.Please check the Toshiba European page and download the RAID driver. During the installation of XP her you have to press the F6 key to include the driver from an external USB FDD drive.
After you have included the don t RAID driver format HARD drive because this will lead to the driver losing.
Best regards
Maybe you are looking for
-
I can't print from my Tablet AT300
Hi guys I can't print from my tablet to the printer connected to our home wifi wireless. What is happening as I type on the 3 points on the left sharing, select top of page of a page, then hp eprint. But all I get is 'file is empty or could not be re
-
Portege 4000 - expantability video?
Just a simple question, my 4000 stutters portege during playback of a DVD (audio and video), if it is possible I want to increase the video capability in any way possible, if it is possible. Please could someone answer my question, or give that advic
-
I want to send a frame once as a master of LINEN with a 9866 OR. I want to wait until the frame is transmitted. I tried the XNET Wait (complete transmission) .vi, but it throws a 1074384753 error: NOR-XNET: (Hex 0xBFF6308F) the function you requested
-
I can't find paint for xp; I looked in start, all programs, accessories, and nothing!
-
Graphics driver is hard to find/Cant driver identifier install ATI.
The title says what I have problems with. Is there a driver is the last? This is what I have now, and I think that I need an upgrade when it exists. If I can't upgrade the driver, can change instead the vid card? If so, how much is an estimate for a