Research of start Windows 7 does not see outlook and onenote items
I use office 2010 and windows 7 Enterprise. When you used to search in the start bar the results it would display would contain items outlook and onenote but it is no longer made. It contains only the elements with the words to search for in the name of the file.
Hello
Work on a domain environment?
You can try the following methods and check if it solves the problem:
Method 1:
You can run the fixit from the following link and check if it makes a difference:
Difficulty of Windows Desktop Search when it hangs or no display of results
http://support.Microsoft.com/mats/windows_search/en-us
Method 2:
Try the steps from the following link and check:
The box "search programs and files" does not correctly display the search results in Windows 7 and Windows 2008 R2
http://support.Microsoft.com/kb/977380
To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
You can also view the following link to see if it works:
Searching in Windows: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/searching-in-Windows-frequently-asked-questions
Let us know if it helps!
Tags: Windows
Similar Questions
-
Windows 8 does not see the hard drive on the Satellite A200
Windows 8 does not see the hard drive on the A200.
How to install it?S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
The HARD drive is visible in the BIOS?Do you use the original disc from Microsoft of Windows 8?
-
Original title: Signature Collision?
I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.
Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision
Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).
I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.
Can anyone help?
Thank you
Comatose13Hello Comatose13,
There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.
http://support.Microsoft.com/kb/330140
Bobby
-
Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s
Hello
I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.
Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.
Hello
The CD/DVD drive needs no special drivers!
Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)Simply said, the Vista should recognize the drive without any problems.
A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?
There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
It of necessary to update the registry entry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}1. click on the start menu.
2. If it is a Vista machine in the search box type regedit without quotes.
3. look for the registry key mentioned above.
4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
5. restart Windows.
6 let me know if it works. -
Windows 7 does not see my Ultrabook XPS14 SSD
Hello
My work has receievd 3 Dell XPS 14 Windows 8. Not wanting to release Windows 8 on my users yet... I wanted to downgrade to Windows 7... shot in a disc of Windows 7 SP1 OEM. On the Windows installation and select custom (advanced option) set up does not see my drive. I can't load the drivers because it did not come with any, and on the dell site Web has not listed.
any help is appreciated!
Thank you
Hi Craigomac1,
This laptop has an option to UEFI boot or legacy. Try to change the setting.
-
I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.
Check that the drive appears in Device Manager.
If so, go to disk management and assign a drive letter.
-
Windows Explorer does not work properly and hold all the time
I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.
Thank you for your time and enjoy your time.
.
Hello
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
Professional, comprehensive and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Portege M400 - Windows 7 does not see HARD drive
Hi, I have the problem, I am trying to install Windows 7 on my M400, but he didn't see the hard drive.
The hard drive is surly ok, ' couse I tested it in the other netbook, I can see it in the BIOS, but any program installation can not.(I tried both Ubuntu and XP Tablet Edition)
Hi Radzik,
I think that Windows doesn't see the drive HARD due missing RAID drivers Windows needs of these RAID drivers before you can install it because it doesn t contain these drivers for the disk HARD is not recognized. You can download the RAID driver from Toshiba Web site.
You can then create a new installation disc using nLite with drivers or copy the drivers on an external floppy drive. Start Windows XP after you press F6 to load drivers from floppy drive.
Check this box!
-
Windows Vista does not see my Canon G12 digital camera
I tried to upload photos today of my Canon G11 digital camera and has encountered a problem.
I used this camera and other cameras on this computer before and had no problem connecting to the cameras. Today, I'm having a problem.
(1) I plug in the camera and a small window at the bottom right of my screen jumps to the top of the poster "install device driver".
"(2)"new hardware found"window that reads,".
Windows needs to install driver software for Canon digital camera»
There are three choices:- Locate and install driver software
- Ask me later
- Do not show the message for this device
(3) I click "locate and install driver software" and I get a updated driver software - error of digital Canon camera that reads, "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.
Digital camera
An error occurred during the installation of the device:
Cannot install the driver because he is only not digitally signed properly. Contact your hardware vendor. »I tried to reboot several times, and I tried to uninstall the device from Device Manager and reinstall the device. None of these worked. |
AFAIK there are no drivers for this device on the Canon website. How can I get my Windows Vista computer to recognize my Canon G11 camera?
Thank you
Johna screen pops up announcing that a new device has been detected.
The drivers for this device are not installed. (Code 28)To reinstall the drivers for this device, click on reinstall.Yes there is no drivers for the device. The software supplied with the camera must be installed. The camera window should open when the camera is connected to the computer. Try using another USB port or use another cable, it can go bad too.
In the Device Manager expand Universal Serial Bus controllers, search for the connected camera or something as a mass storage device. Right click above and uninstall, then restart, it needs to be reinstalled. If does not uninstall everything under USB controllers and then restart your computer.
-
Windows 7 does not see added internal hard drive
I installed an internal hard drive 1 TB on a Windows 7 using SATA system. Device Manager sees the drive, but Windows does not. So I can't access the drive. How can I get Windows to use this hard disk (disk 1) to be the image of the disk system 0?
Thank you
Probably should have Setup no matter what RAID before installation. Thinking that can be a destructive thing. Not that I'm a great believer in RAID1 arrays (mirror) - I'm not. I'd rather have real backups - external backups.
Usually a RAID1 will help only if the first hard drive die an immediate death. None of the defective areas, no viruses, no random deletion of files. Why? Because a HARDWARE RAID1 is an instant copy of everything that happens on the first hard drive. If you clear hundreds of files - they are on both. A virus corrupts the things - the other disc is in place. Form data and scramble of bad sectors - well, look!
I have a storage attached network device I backup on an eSATA hanging from it it stores up to another network and storage I do more selective backups to as a backup for my saved backups. Internal - nothing. Well, I guess that the restoration of the system and version control integrated with Windows 7...
-
Windows 7 does not see the xp on network machines
We are a store Dell running XP Pro on peer-to-peer networks... deployment of Windows 7 Pro workstations and laptops. Out-of-the-box, we put it sharing, discovery, working group; etc. However, some of the machines Win 7 do not see network XP machines and thus cannot use the graphical interface to map to different files and resources. You can their ping, set using "Net Use" or "Add a network location" or "Connect Player" as long as you know the complete path (ie: \\server\server_share\home\bill\cad\cnc.) But you can't see them in the network window to map the drive to records letters. I have studied this issue, has visited many forums and talked to many other tech all with the same question. The conclusion seems to be because it is a Win 7 problem not addressed XP came out. So the current thinking seems to be to use the commands Net use in an autoexec.bat file. So to use the latest version of Windows with XP, we need to use commands BACK maps automatically records. A huge advances in technology. Really? Tell us we're wrong and there is an answer?
Hello
Your question of Windows7 is better suited in the TechNet forums. Please post your question in the TechNet forums.
You can post your request here on TechNet community that focuses on issues such as
http://social.technet.Microsoft.com/forums/en/categoriesI hope this helps.
-
LR 5 / 10 Windows - import does not see my photos directory
Hey people,
LR 5 Windows 10. It worked great until a recent windows update. Now I can't see my photos directory in the import dialog box. I see the drive the files are, but can not see the directory of real photos.
Another bit of clarifying information: when windows updated, he kept an account of windows to create onilne. This account creates a new set of home directories that appear to be linked to the previous windows user name file structure 7. Something seems to have changed which prevents LR to see all the files on the disc.
Has anyone else seen elsewhere?
Thank you!!
I do not think that it has nothing to do with an account of the window (note that was never an obligation) online, but more with the permissions.
The test is to run Lightroom as administrator or check that your has UID of full access to these directories through the Properties dialog box.
My guess is that previously, you used only access I want to who had administrative access and is not a new one, that you created.
-
Windows 8 does not "see" the functions on my Canon MF4450 scanner
Printer works with Windows 8, but not the scanner function.
The problem is that it will work for a while, but then it gives the same error. It is as if Windows 8 is uninstalled or damage something.
-
Adobe Acrobat DC FeatureLockdown does not (Plugin Outlook and Sharepoint)
I need to deploy Adobe Acrobat DC in our company and in the face of a problem with locking function.
I put the keys to register HKLM\SOFTWARE\Policies\Adobe\Adobe Acrobat\DC\FeatureLockDown
-\cCloud--> bAdobeSendPluginToggle DWORD 0
-\cSharePoint--> bDisableSharePointFeatures DWORD 1
But I still have the option 'Add an account' to add a SharePoint account as well as the 'My account' icon in Outlook and the option 'send & Track '.
Deactivation of Sharepoint works for Adobe Reader DC, but not for Adobe Acrobat DC.
Is there another option to disable these features, for example by using the Customization Wizard?
The registry keys have been added by an AutoIT script after that installation is complete.
Thanks in advance.
If the correct registry key is HKLM\SOFTWARE\Policies\Adobe\Adobe Acrobat\2015\FeatureLockDown
I just noticed the other, do not see it before so I guessed DC is good.
-
Satellite U300 - Windows XP does not see HARD drive
Hello
I've updated the BIOS with the latest version, I've built a floppy with the SATA drivers, none of them work, XP Setup is not able to recognize the HD.
Surprisingly enough the BIOS SATA mode option can not be seen.
Any idea?
Kind regards
Lionel.Hello
Not all BIOS contains the SATA option!
In your case, I recommend the construction of a new CD of Windows XP by using the nLite.
nLite is a free tool and allows you to include the SATA dirvers in the Win XP CD!Then you can use the new XP disk to start and new installation of the OS
Search here in the forum! There is enough discussion on this procedure
Maybe you are looking for
-
No information about my AT200 system
Hello When I go to setting and click system information, I don't have all the information, also in the gas station it doesn't show up with one of my info it i.e. serial number system etc... any help will be appreciated Thank you.
-
HP ENVY on the dv6 hdmi port connect to the graphics card or onboard video?
HP ENVY on the dv6 hdmi port connect to the graphics card or onboard video? Thank you!
-
People of greetings, I hope I'm not repeating this message. I have a T510. The audio internal microphone is coming through the speakers when I'm not in an audio call or videoconference. As soon as I go to an audio or video call with mics stop working
-
HP LASER JET P4105dn: Press the 'OK' button on the printer to print documents
Whenever someone will print anything to this HP printer, that it does not come out and the red light blinks indicating attention. The display shows 'LOADING 2 DRAWER LETTER ORDINARY'. I press OK once and then he says: "USE TRAY 2 COLOR A4" so then I
-
THE ACTUAL SPENDING CD DISC OF THE operating system ON EAST CRACK
I sat down on my Vista OS cd mdeia and cracked. I am the owner under license and the sticker key COA on my laptop, how can I get a replacement CD? Thank you