Windows 8 does not "see" the functions on my Canon MF4450 scanner

Similar Questions

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

  I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

  Check that the drive appears in Device Manager.

  If so, go to disk management and assign a drive letter.

• Windows 7 does not see the xp on network machines

  We are a store Dell running XP Pro on peer-to-peer networks... deployment of Windows 7 Pro workstations and laptops. Out-of-the-box, we put it sharing, discovery, working group; etc. However, some of the machines Win 7 do not see network XP machines and thus cannot use the graphical interface to map to different files and resources. You can their ping, set using "Net Use" or "Add a network location" or "Connect Player" as long as you know the complete path (ie: \\server\server_share\home\bill\cad\cnc.) But you can't see them in the network window to map the drive to records letters. I have studied this issue, has visited many forums and talked to many other tech all with the same question. The conclusion seems to be because it is a Win 7 problem not addressed XP came out. So the current thinking seems to be to use the commands Net use in an autoexec.bat file. So to use the latest version of Windows with XP, we need to use commands BACK maps automatically records. A huge advances in technology. Really? Tell us we're wrong and there is an answer?

  Hello

  Your question of Windows7 is better suited in the TechNet forums. Please post your question in the TechNet forums.
  You can post your request here on TechNet community that focuses on issues such as
  http://social.technet.Microsoft.com/forums/en/categories

  I hope this helps.

• Windows 8 does not have a driver for a Canon 9950F scanner

  My Canon 9950 Scanner (Canoscan toolbox) worked on my XP and Vista OS, but there is no driver for my new system of Windows 8. Can anyone help?

  I hope this helps someone. I have a Dell XPS 8700 with 8.1 Win 64 bit on an SSD. As everyone knows the drivers Canon 9950f only go up to Win 7 64 bit. So I installed the twain driver for win 7 64 bit and the Canoscan for win 7 64 bit. I installed using the compatibility option. I rebooted and plugged my USB and it works! I love my 9950f and stressed it would not work on my new computer.

• I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen "select the driver to install."

  Device drivers for a Win 7 install on Ubuntu system

  Hello

  I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed.  I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not...  So, how do you get drivers for Windows can install (or y at - it another way to work around it)?

  Thank you!

  The bios on fail safe defaults options are?

  It will probably take the raid driver

• system does not see the hard drives as P6000 Windows 7 Pro 64-bit

  PC is a little more than a year. About 2 months after installation disk c crashed. Replaced HP drive.

  Customer said that she had problems starting and kept restarting. He ran chkdsk and hooked up to 36%

  Now the system does not see the drive, but he sees no RAM, etc.

  Anyone know what causes this?

  Can what information I give to help troubleshooting?

  Thank you!

  Hello:

  Try resetting the CMOS.

  If this does not work, I would say that the drive controller in the motherboard is dead.

  Clearing CMOS

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

  Hello

  My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
  In our office, the computers are all equipped with Windows XP.

  When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
  I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

  I hope you understand what I mean.

  The man said that he had no this problem with non - OEM Windows Vista versions.
  He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
  He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

  Does anyone have an idea of the cause of this problem?

  > The man said that he had no this problem with non - OEM Windows Vista versions.
  > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

  That's nonsense for me
  The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
  There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

  Check this box:
  http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

  You will find information that a problem has to do with the new Windows Vista network map.
  Windows Vista uses a new Protocol (Link Layer Topology Discovery).
  LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
  But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

  But you can fix the problem by downloading and installing the layer topology discovery responder.
  Install it and your PC Windows XP will appear on the network map.

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• While trying to install XP Pro on T60 he does not see the hard drive, but the fact of the laptop.

  Have a lenovo t60 disk opportunity was wiped out when trying to install XP Pro, I get message windows does not see the hard drive, but he sees the laptop.

  If its SATA you need SATA drivers to install. Since the XP CD doesn't have the SATA drivers on it

  Unless you disable the AHCI in the BIOS. Or their wake.

  Or get the SATA drivers. Check out them on diskette, press F6 during installation and then add them.

• laptop does not see the disk of works 9

  I have works 9 and I want to install it on my HP laptop with windows vista home premium as a the opp system.
  My laptop does not see the cd or one of its files... The packaging says it's compatible with windows vista.
  It works on my desktop which has windows xp system opp on him.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  For any problems with your computer, not reading CD, ask in the Forum Vista Hardware at the above address.

  See you soon. Mick Murphy - Microsoft partner

• Version 38.0.1 does not see the passwords stored in previous versions

  Version 38.0.1 does not see the previously saved passwords, and urged it to re - enter and save the password. After revert you to the version saved 31.7.0 pass back too. We have more than hundreds of copies of the program and all cached passwords, users do not even know what their password. This failure is a serious problem.

  Problem solved. Probably the file has been corrupted signons3.txt. I deleted the file, and the new passwords are kept. After this version of the software update and new version I've seen passwords, create a logins.json file and now everything is fine. On all other computers in the company such a problem does not arise.