Windows 7 does not send print to deskjet 932c with parallel connection, help

Similar Questions

• Laptop running Windows 7 does not start if the external hard drive is connected

  I know what is already on a thread, but here it is again (i.e. thread became uncontrollable anyway and did not offer me solutions). I have an ASUS K53S laptop computer Series and use it as a desktop PC. It sits on my desk and never move, I plugged my larger screen, a keyboard and mouse, printer and external hard drive that I keep all my information on i rarely save to local disk. These things represent more than ports USB to the laptop, I have a hub 4 ports on there also. It is just background information; I mean, the laptop is a must.

  Here's the problem: when I start, as I do every morning, I used to see ASUS inspire Innovation - first of all, persistent Perfection for about 1 second, then the laptop will just get on the job and complete its start-up in about a minute (including login). Which was very good until a few days ago when things started slows down a bit, then I rebooted as I always used to with my Windows XP tour. All closed but return is reactivated and it hung on the opening screen of ASUS and show no signs of getting further. I went outside and continued on another work that does not need a computer, thinking that if I ignored it it would be bit go further, but I came back hours later to find that it is always locked.
  Well after a little, I took the plug my external hard drive, and he continued to start where he left off, like nothing had happened.
  This settled this possibility, but before that, I had established a thing; I need to connect my external hard drive before starting, otherwise it wouldn't connect properly.
  When I managed to finally get both going at the same time (Yes, after some persistence, he recognized the drive but I still would like a solution to this when it exists), I looked at the hard drive and all my files are corrupted or something. photos are not valid, some files that I know to have files in appear them as empty and I can't make any sense at all. Is there someone out there who has had this problem before and fixed, and if so, how?
  My external hard drive is a Seagate 1 TB, if it helps.
  I really want an answer to this, I have data on that disc that I need and I'm not.

  If the problem affects only one PC it says its something specific to this PC.

  Is there traces of yellow warning in Device Manager?

  At whatever it is updated / installed on this PC before this problem, or run a maintenance utility?

  If there is no warning of the Device Manager, then if you perform a clean boot PC http://support.microsoft.com/kb/331796 NB this isn't the manual method the Fixit which helps?

• Windows Explorer does not display the file or files with fix = folder

  A few days ago I noticed that I have some files seemed not be included in the records, I have worked with. After some fiddling, I find that I can see all the files in a folder if 'fix' (at the top right of the display of the files) is set to "name". Usually the value by default in "folder" but whose value fix folder the subfolders and their content is invisible.

  With fix the name value, I moved some files to another folder and they turned upward correctly. But when I then moved this folder in the folder where I had taken the files and set fix it to the folder again the folder and its files have disappeared.

  I had recently downloaded both Dropbox and Google so I removed the and pulled out another who was supposed to repair/update drivers that I had a problem with many (e.g. printer) drivers disappear just before Christmas. Does not see how this can be related unless there is also a malware somewhere on my computer. I have Norton 360 update and run Windows Defender when he invites me.

  The only other recent change (after the loss of the pilot) was to download all the Windows updates current, even if not necessary.

  I am running Windows 7 64 bit. Windows is up to date.

  Right-click on the folder and click Properties,

  Is there a Unlock button on the general section?

  If not,

  Check the hidden box and click on apply.

  This will set all the folders and files as hidden.

  Now to clear the hidden check box, click on apply again.

  This will remove the attribute hidden folders and files,

  Finally click OK and apply and OK your way out.

  At worst, check with your user account permissions.

• Windows Mail does not send to Mail in the sent folder

  This morning, my Windows Mail is no longer my e-mails sent in the sent items folder. E-mail send OK, and I'm getting the small arrow icon purple on the projection of graphics Inbox mail I answered. It is simply not save copies of the sent emails.

  To my knowledge, nothing has changed since yesterday and I have installed any new software. I checked the settings of e-mail Options and is checked for "backup copy of messages sent in the sent items folder. Just to be sure I unchecked, then checked again and press on apply, but it did not help.

  Any thoughts? I REALLY need copies of all of my sent mail. Is there a maximum number of sent messages, I can save maybe?

  (BTW - I'm on Vista Ultimate Edition with Service Pack 2. I use AVG Free for my anti-virus, but nothing has changed there either, as far as I know.)

  Before going through the stages of the reconstruction of the base of messages, try to repair the database with my Windows Mail utility and see if that fixes the problem.  Seewww.oehelp.com/WMUtil/ also make sure AVG is not scan e-mail because that could be the culprit of this issue.  See www.oehelp.com/OETips.aspx#3
   
  Steve
   
  "Venture55" wrote in message News: 1481fb3d-33e7-4258-a505-3cbbd45ecdb1...

  This morning, my Windows Mail is no longer my e-mails sent in the sent items folder. E-mail send OK, and I'm getting the small arrow icon purple on the projection of graphics Inbox mail I answered. It is simply not save copies of the sent emails.

  To my knowledge, nothing has changed since yesterday and I have installed any new software. I checked the settings of e-mail Options and is checked for "backup copy of messages sent in the sent items folder. Just to be sure I unchecked, then checked again and press on apply, but it did not help.

  Any thoughts? I REALLY need copies of all of my sent mail. Is there a maximum number of sent messages, I can save maybe?

  (BTW - I'm on Vista Ultimate Edition with Service Pack 2. I use AVG Free for my anti-virus, but nothing has changed there either, as far as I know.)

• Windows Mail does not send/receive emails even with username and pwd. __

  I also tried Thunderbird with the same result.  Could this be a problem with the OS behind Windows Mail?

  I need help to understand what is happening here.

  If this also happens with Thunderbird, it is more likely a server problem and not a Windows problem.

  What happens when you try to send or receive? Please post the error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

  Bruce Hagen ~ MS - MVP [Mail]

• Audio / sound on my Windows XP does not or even acknowleding she even has one. Help, please!

  Well, my computer is a Dell and it's Windows XP. It is said that my sound is not yet existing. There is no control volume or parameter, or whatever it is for a, but every once in a blue moon, he pops up to five or ten minutes, but other than that, it's gone. I've tried and tried and tried to update and get new ones and fix my old. Every time I have come to the point where I almost fixed, it asks me to register and ask for a code that I do not have a license number or some checks weird. I just need an Audio driver free, easy and fast. I don't have sound in weeks! He leads me into the wall.

  Try the Troubleshooting of audio playback.

  See also How do I fix the sound problems in Windows XP

  Carey Frisch

• Restoring files of Windows Vista does not work - I have tried many, many things. Help, please.

  Hello

  I did a windows vista upward from some directories of laptop for my ReadyNas Storeage via the network.  The backup is is about 8 times before the hard drive on the laptop crashed.  We are unable to recover the HARD disk for thought I would recover from the laptop.

  Here's the problem:

  I use Windows Restore - Advanced Restore to try to recover from the previous backup.  After some fiddling, I am able to see that the program of restoring Windows backup sets.  I'm trying to restore all files to their original location.  The restoration done some preparatory work and then get the error message: Restore did not complete successfully. Error code: 0x8100001A

  Here is what I tried:

  (1) find the original Mediaid.bin file and copy it to the root.
  (2) run the following process to rebuild the mediaid. http://social.technet.microsoft.com/Forums/en-US/itprovistaapps/thread/56f5ed9b-8722-4fa8-b1e9-9c17d7132feb.
  (3) have successfully used windows Explorer to extract a single file.  (backup stuff windows are stored in zip files).  Problem, this only works for files below a certain size because I don't know how to merge files voluminous back.
  (4) copied the backup set off the ReadyNas to a USB to load from there.  It worked only when the USB, I have shared on the network.
  (5) have shot a question at JustAnswers, but they have not as well.
  (6) tried to restore a previous backup set but also failed with the same error message.

  Any help would be welcome.

  Thank you

  Hello

  for similar issues, see the links below and check.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/b489c071-cb79-4893-8942-188e20ed6f09

  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/5e368f95-5142-4B9F-AFB2-ccff9b646433

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/d7717978-290A-4f29-8e2d-5f6de0ebe0ff

  It will be useful.

• WINDOWS 7 does not recognize my Logic3 (US202) USB to serial connection

  Logic3 has worked well on my old Dell Windows XP computer to connect my Garmin GPS

  I tried Dell support online without result

  Logical email - no reply customer support

  Tried troubleshooting on this computer - no. driver installed

  New computer is the Dell Inspiron 560 desktop computer

  Hi MikeNB,

  I solved my problem with the purchase of a new USB to connector series obtained from www.lindy.com

  They also have a good line.

  Hollyhill cordially

• Windows 7 does not provide any warning if other users are connected to our computer on shutdown.

  We have problems when we close our main computer and break the network connection with others inadvertently connected users.  In researching the problem, we find a lot of people who want to disable the warning to farm.  Our problem is exactly the opposite, but the warning message before stopping.  The problem is frustrating currently our users who are unexpectedly fell and continue this bad practice strong risk of work lost and corrupted files.

  Please ask us about how do to Activate the warning as "that other users are logged on our main computer" before closing.  Thanks for any help.

  Assuming that you are referring to the management of an enterprise network:

  Post your question somewhere around here instead:

  http://TechNet.Microsoft.com/forums

• Why the windows key does not display the start menu?

  When I press the Windows key + E it opens Windows Explorer as it should. However, pressing the button of Windows alone does not start; I have to click with the mouse on the Windows buttonrto bting start menu screen

  Hello

  -What is the number of brand and model of the computer?

  Flip your keyboard and shake gently. This will remove any buildup of debris which may prevent the keys work properly. You can also use compressed air to remove dust from hard to reach under the keys areas.

  Method 1: Check with another keyboard.

  Try a different keyboard on your computer. If it works well when you connect a different keyboard, the issue may be with the keyboard.

  Method 2: on the keyboard of the screen
  Check if the problem occurs while using the on-screen keyboard. It will help us to check if there is any problem with the keyboard.

  http://Windows.Microsoft.com/en-in/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  Method 3: I suggest you to check if you are facing the same question in the new administrator account.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For reference:

  Troubleshoot keyboard

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-keyboard-problems

  (Also applies to Windows 7)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Windows xp does not recognize the hp c6180 photosmart printer

  My windows xp does not recognize my hp c6180 photosmart printer

  Hello

  1. were you able to use the same printer without any problems before?
  2. don't you make changes on the computer before this problem?
  3. you receive an error message?

  See the following articles that may help you resolve this problem.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

• Windows Vista does not detect the printer

  had the printer works fine until Windows vista did an update. Now hp poster printer not detected

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• I'm scanning in legal size docs. with my printer/scan/fax. The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.

  I have a new HP with Windows 7.  I'm scanning in legal size docs. with my printer/scan/fax.  The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.  I could do this on my old XP computer.  Microsoft forgot add parameters of legal size in this application?

  Hello notnewbee,

  Thanks for posting on the Microsoft answers Forum.

  You do not give the model of your printer/scanner/fax machine so I can't direct you to the website of the manufacturer of specifc. However, I would
  you go to the website of the manufacturer of your printer and download the latest drivers for Windows 7. Sometimes, if you use a driver that is not intended for your operating system, then your device can operate and install, but some features may not work.

  If they do not have an updated driver, then try the compatibility mode for Windows XP and see if your printer will work correctly.
  The information below will show you how you can make older programs run on Windows 7 here.

  If please reply back and let us know if this helps solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install the drivers for the Dell 725 of CD printer as the computer tells me that Windows 7 does not recognize

  I have a Dell InspironM5010 with Windows 7 installed and you want to use a Dell 725 printer with it. I have the CD with the drivers of the printer, but can not load as the computer tells me that Windows 7 does not recognize

  Original title: ask the community

  Your CD is too old, but you can be lucky...

  Is there a downloadable file here for your printer...

  http://www.Dell.com/support/troubleshooting/ca/en/cadhs1/product/Dell-725

  .. but this is for Windows 7 32-bit ONLY, and I have the feeling that your OS is 64-bit.

  Windows may have a driver somewhere see here for how to find...

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• my printer is a HP CP1700 and Windows 7 does not recognize that it is able to print 2 sides

  I just bought a Dell Inspiron.  It works very well except for my printer.  My HP color inkjet CP1700 printer is able to print 2 sides.  Windows 7 does not recognize that it is able to print both side and does not give me the option to enable printing two sides.

  Did you download the drivers from the HP website or just use Windows Update? Try using the software from here.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=33110&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=33103

  I hope this helps.