Windows 7 error: IRQL_NOT_LESS_OR_EQUAL Stop: 0x0000000A
I have a laptop Dell Inspiron.
I installed the OS from Vista to Windows 7
I think that the upgrade successfully compleed... There was no failure I've seen during the upgrade.
Immediately after the upgrade, reagardless of what app I'm running, I repeatidly receive the IRQL_NOT_LESS_OR_EQUAL Error in a few minutes.
Hello
1. which edition of Windows are you running?
Example: Windows 7 Professional 64-bit
2. When you receive this error message?
Please follow the links below to solve the problem.
Method 1
Resolve stop (blue screen) error in Windows 7
http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-
http://support.Microsoft.com/kb/929135
Note:
please follow step 7 of the article mentioned above to start the computer normally, once you have completed the necessary troubleshooting.I hope this helps.
Tags: Windows
Similar Questions
-
Run a XP edition on my laptop, when a few days ago the system could not connect. It would increase logging in the stadium and then would suddenly return to the blue screen. The system records, in safe mode. Tried to restore the system to a date of return, but without success.
The message on the blue screen is like below, appreciate if there is no guidance on this. Perhaps a conflict of hardware or something like that...?
-----------------------------------------
IRQL_NOT_LESS_OR_EQUAL
..
..
..
STOP: 0X0000000A (0X00000002, 0X00000000, 0X017F0304, 0X8052746C)Hi Getafix1,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Follow the steps in the article.
You receive an error message "Stop 0x0000000A" in Windows XP
http://support.Microsoft.com/kb/314063
Method 2: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
-
Original title: XP questions
I am running WIndows XP Pro SP3 on a Dell Optiplex gx270s and get several error messages stop "Blue screen" intermittent and different at startup (for protect my computer). Prompt notification Windows found problems with the file system and run CHKDSK/F. I am unable to do so as I can not find my administrator password (also necessary if you plan to run from my XP installation disc). Windows Fix - It Center, running 'Folder & troubleshooting' reports icons randomly change the icons but no resolves not. I didn't notice the icons change and do not if this is related to Stop what error messages at startup, I've been doing. Running a disk check during start-up and Diagnostics IDE are not problems. It lasts for quite awhile and I've delayed just deal with it because it is not always the case. A lot of program installs / uninstalls and Microsoft Updates since its start if the system restore wouldn't do me any good. Before reinstalling the operating system, what are my options? Is there a way to reset my ' Administor password ", or better yet does not require one, (it is a personal computer for personal use only and I don't remember why a password has been assigned)?
Here are some of the error messages:
STOP: 0x0000007E (OxC0000005, 0x89AD8000, 0xA579CCB4, 0xA579C9BO)
BAD_POOL_HEADER
Technical information:
STOP: 0 X 00000019 (0X00000020, 0X89D5FDA0, 0X89D5DC8, 0X0A050002)
IRQL_NOT_LESS_OR_EQUAL
STOP 0X0000000A
(0x6750300C, 0 x 0, 00000002 00000000, 0x804FFDB6)
Hello
You did changes to the computer before this problem?
The administrator password cannot be reset.
See the following article for more information: Microsoft's strategy concerning lost or forgotten passwords
In the following troubleshooting steps may help you resolve this problem.
How to troubleshoot a Stop error 0x0000007E in Windows XP
http://support.Microsoft.com/kb/330182FIX: Error Message When you connect a scanner or a digital camera to a computer that is running Windows Vista or Windows XP Service Pack 2: "BAD_POOL_HEADER STOP"
http://support.Microsoft.com/kb/934177You receive an error message "Stop 0x0000000A" in Windows XP
http://support.Microsoft.com/kb/314063 -
My Vista system was crushed, tried everything, but finally resorted to a recovery of the original factory image off the coast of the hard drive Partition. Everything seemed to go smooth but now I get a blue screen at startup: irql_not_less_or_equal STOP: 0x0000000A (0 x 0, 00000002 00000001, 0x81AE8590)
Odd part is the system has two RAM slots, we have a 2 GB key and another has a 1 GB. Could not get the machine to start with two sticks in. Will start with a stick in each thin slot. Will not start no matter how they are installed if you are using the two RAM slots. Ran SFC/scannow. He found errors, that it cannot correct. How can I fix these errors?
CBS log is large enough: what details should I post it to help you troubleshoot?
Note: Were able to update the system, including the installation of updates Windows 128 and seems to be updated throughout the SP-2. I really don't want to run another recovery if possible.
Thank you!
Hello
Perhaps you have different brands of RAM in your computer, and so it would not start with the two inserted Rams. Do a check for your specific PC memory that tells you what products work with your system.
Follow the information in this article.
Know what type of RAM you needIn addition, updated BIOS.
Warning of the BIOS:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.If scan SFC did not fix the issue, I would say that you follow the steps in this article to fix it.
http://support.Microsoft.com/kb/929833
Regarding blue screen errors, follow the steps in this article that applies also for Vista.
-
New m/b: gigabyte ga-880ga-ud3h worm. 2.2, AMD phenom II x 6 1090 t. & Corsair 1600 mhz, dual channel, ddr3, 8 GB (2 sticks). 2 weeks-> PNY GT 430-1 GB, PCI-e 2.0; Antec 650w pwr supply, SATA 160 GB & 250 GB SATA; both the format installed XP, 35 min. to install devices then T.B.S. of D. CPU is between 33 & 34 C, Sys. c. 29
Hello
See the article below which might help you.
You receive an error message "Stop 0x0000000A" in Windows XP
-
I have a laptop with Windows XP Professional. Every time I have shut down or restart my computer, I get a bluescreen IRQL_NOT_LESS_OR_EQUAL STOP: 0x0000000A(0x00000166,0x00000002,0x00000000,0x804FAADA). Is someone can you please help me solve this problem? I would really appriciate any help that you may be able to offer. Thank you.
c.cole0508,
This article describes the problem you are experiencing. Post back if you have problems after the listed steps.
http://support.Microsoft.com/kb/314063Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Dear all, I installed windows Server 2008 R2 on HP Proliant G5 260 and I have to hard as dynamic server and mirror discs, so the problem is Server suddenly restart and give this paper in the management of the ILO: "abnormal program termination (BugCheck, STOP: 0x0000000A (0xFFFFF8800EF21000, 0xFFFFF800016DCD40, 0 x 0000000000000002, 0 x 0000000000000000)). So please how to fix this?
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
Blue error screen STOP 0x0000000A and STOP 0x0000004E
Original title: BSOD error
I have Windows XP SP3 and receive BSOD with error 0x0000000A and 0x0000004E (once) codes. When I go to safe mode, I get a message that the installation cannot run in safe mode and it restarts with the BSOD. Is there a solution for this? Can I reinstall Windows XP safely? The data is saved.0x0000000A and 0x0000004E (once) error codes.
You tried to paste 0x0000004E in google search? I just do.
It's the first thing you need to do if you have a question about a particular file or error.
STOP Msg: 0x0000004E or 0x0000000A in heavy computer use
http://support.Microsoft.com/kb/139281UTC/GMT is 19:18 on Sunday, November 27, 2011
-
Original title: BSOD
tried to reinstall windows xp bsod STOP: 0X0000007E, (0XC0000005, 0XF78DA208, OXF78D9F08 * pci.sys_address more numbers to several numbers and a date stamp.)
Hello
1. How are you trying to install?
2 do you use a full version Windows Setup disc or the recovery disk?
3. at what stage of installation you get the error message?
I suggest you try the steps from the link below and check if it helps.
http://support.Microsoft.com/kb/330182
Additional information:
How to fix a computer that does not start: http://windows.microsoft.com/en-US/windows-xp/help/setup/how-to-fix-computer-that-will-not-start
Hope this information is useful.
-
Windows 8 error irql_not_less_or_equal
Saya menginstall gadmei usb tv box utv302e dan sudah mengikuti petunjuk di atas & tak ada theory / hasilnya sama saja. Tetap Muncul qarning that have
I also have same problem, the upgraded 8 to 8.1 and each time he has installed I get a blue screen saying pc should restart (41% full) and the code error IRQL NOT LESS or EQUAL.
A pc for almost 2 years and it built myself, never had any problems so far.
-
STOP: 0X0000000A IRQL_NOT_LESS_OR_EQUAL
When windows is shut down I get the error message
IRQL_NOT_LESS_OR_EQUAL STOP: 0x0000000A(0x000002CC,0x000000FF,0x00000000,0 x804E3B58)
It appears something is accessing memory while closing - this is the first time that I closed if unfortunately there is no restore point to return to-verified by MS, but no precise answer it
Someone has ideas of how to do to solve this problem?
Hello
There are many reasons that may be responsible for this. The error can be caused by a device driver system maintenance, anti-virus, backup or tool customer of third-party network that is not compatible with the new version.
IRQ (interrupt request lines) is the communication channels by which your hardware devices communicate with your computer s CPU. When a device requires the attention of s of CPU, it uses a request for interruption to inform the processor he gave, which requires treatment. So it s reasonable to suspect this error message indicates a problem with a hardware device or a device driver.
According to Microsoft, the cause of this problem is a device driver or an incompatible hardware device.
Please check this links:
http://support.Microsoft.com/default.aspx?scid=kb;en-us;314063
http://www.Microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/default.asp?URL=/resources/documentation/Windows/XP/all/reskit/en-us/prmd_stp_hwpg.aspI'm sure you'll find lots of useful information.
Good luck!
-
blue screen * STOP 0x0000000A in Windows XP
blue screen error message: * STOP 0x0000000A (0xFF1701F0. 0 x 00000002, 0 x 00000000, 0x80536A1C) win xp home edition
Around my house (less than 100 feet I can't use / the view high tower or net - only 'safe mode' whenever I start it (under each variable with or without battery) I get the error message blue screen (see above) - outside of the area of 100 feet, lap top works fine... perfect, starts every time;) HP lap top xp home ed works very well... (I can't use it at home or within 100 feet of my house via especially blue screen message)
blue screen * STOP 0x0000000A (0xFF1701F0. 0 x 00000002, 0 x 00000000, 0x80536A1C) xp home ed
You get the following BSOD:
Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL
This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
Please download the files dmp from the Windows\Minidump on your Skydrive folder (copy the dmp first on your desktop, otherwise you can not download them) and post a link here, so that we can look at landfills. Perhaps we see the cause.
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
I get the IRQL_NOT_LESS_OR_EQUAL STOP error code
I get the error code IRQL_NOT_LESS_OR_EQUAL STOP 0x0000000A, 0x8204083c, 0 x 00000001, 0 x 00000002, 0 x 00000000. After I try and connect. Safe mode I would like to connect, I tried several restore points system has not worked, laast known good configuration didn't work, scandisk, scan of the hard drive and memory said its ok. HP technical support said that I have to wipe the drive, but I was wondering if there is a patch on or if it is a known issue. (Laptop HP dv9000 purchased in w canada)
It can help to look at the files minidump against accidents with a debugger.
Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?
The following link has information about the use of Windows Live SkyDrive:
If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop
In addition, you do not necessarily have compress the minidump files, you can download one at a time.
-
Randomly, the screens of Windows Vista blue with the following error:
STOP: 0X0000000A (0 X 0, 00000002 00000001, 0X996E5258, 0X8227A32C)
This page on the support site for Microsoft described my exact problem, but when I download and run the patch, a message box opens that says "this patch does not apply to your system" and closes the Windows Update stand-alone Installer. Please help me solve this problem!
Thank you
a computer guy of colleaguesHello
Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates -
updates to the pilot), or add key software lately? Drivers and antivirus/antispyware/security
the products are also suspect likely. Next message is my generic driver updated methods to use when
you get to this part of the resolution of the problems.BCCode: a 0x0000000A
Cause
This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.
The error that usually generates this bug check occurs after installing a faulty device driver,
BIOS or system service.If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be
caused by a device driver, system service, a virus scanner, or backup tool which is not compatible
with the new version.Solve the problem
If a kernel debugger is available, get a stack trace.
To resolve an error caused by the faulty device driver or service system, BIOS
- Restart your computer.
- Press F8 to character-based menu that displays the choice of operating system.
- In the Windows Advanced Options menu, select last known good Configuration .
- This option is most effective when a pilot or a service is added at a time.
To resolve an error caused by an incompatible device driver, system service, virus
Scanner, or backup tool- Check the system log in Event Viewer for error messages that may identify the device or
- the driver that caused the error.
- Try disabling the cache in memory of the BIOS.
- Run the diagnostics of material provided by the manufacturer of the system, in particular the memory
- scanner. For more information about these procedures, see the manual of your computer.
- Make sure that the latest Service Pack is installed.
- If your system has interface cards (SCSI) small computer system, contact the adapter
- manufacturer for updates of Windows drivers. Try to disable sync negotiation in the SCSI
- BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
- For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port.
- Also, check each IDE device to the right setting master/slave/stand alone. Try
- remove all IDE devices except for the hard drives.
If the message appears during installation of Windows, make sure that the computer and all the
devices are listed in the list of the products tested Microsoft Windows market.=========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that causes
It crashing.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
This is my generic troubleshooting tool and can probably give a bit more specific when help
you give the ICC codes.Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen
of death "crashes and displays the information about all crashes in one
Table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Bluescreen error IRQL_NOT_LESS_OR_EQUAL of death
I get a blue-screen-of-death all error when trying to install Windows 7 from a CD. Occasionally, I get this while I'm still load the files to the CD, and sometimes as he tries to do the actual installation. Sometimes it happen at other times... basically it's random! Without more ado info or to waste:
Hardware information:
Gateway ID49C series
Hard drive: 500 GB, freshly cleaned
Official Windows 7 installation diskTechnical information:
IRQL_NOT_LESS_OR_EQUAL
STOP: 0X0000000A (0 X 0, 00000002 00000001, 0X0E5FEBEC, 0X8BABA168)If you have any questions regarding the other circumstances, or whatever and think you can help me, please do not hesitate to contact me!
regoldberg [at-sign] gmail [period] com
Ciao!
Try to reduce the amount of RAM installed on a single key and see if that makes a difference.
Maybe you are looking for
-
Lost USB, backed up with Time Machine
Hoping someone can help me! I lost a USB stick containing important data. It was included in the time machine, but because the physical device is missing, it does not appear when I browse backups. Can someone tell me please how to recover this data?
-
ThinkPad with transflexive, outdoor screens
Hello I want to replace my R51 with something a bit faster and lighter (T400, T61, X...).One of the most important features for me on the R51 is transflexive screen.The screen is readable in full sun with minimal background light. What current Thinkp
-
Satellite A500/02J: Unable to get link REGZA/HDMI to work
I have a laptop A500/02J Satellite with hdmi output, and I have a pre-installed toshiba hdmi control program.Recently, I bought a color LCD toshiba REGZA 32AV500A TV and have my computer works through the tv via hdmi. However, my tv has regza link an
-
Start labview, so fix that will probably teach me a lot. Looked and saw a lot of posts of things only work in games of the run mode, but nothing like this. I have attached the relevant real-time and FPGA VI. The code is supposed to read a motor encod
-
Problems with ad-hoc internet compirtir
Saludos has created ad hoc red una y al end el proceso no me da the internet sharing option is can activar in otro sitio, Gracias y saludos nuevo