Satellite A500/02J: Unable to get link REGZA/HDMI to work

Similar Questions

• Where can I get the driver/software for Satellite A500/02J disc

  Hello

  Newbie here, just want to ask, are there at - there a driver/software for laptop Toshiba A500/02J disc.
  I just bought a new and its been not formatted, so no recovery partition where drivers would be.

  I searched the net looking for face recognization software, etc., but nothing works.
  There must be a drive to install there somewhere...

  Can someone help a newbie?

  Concerning
  Carl

  Hello

  The laptop has not been handed over with the recovery disk because there is a pre-installed tool called Toshiba Recovery Disk Creator.
  This software could create the recovery disk that allows the laptop to factory settings still.

  By the way; Satellite A500/02J is an Australian for Toshiba laptop model and drivers must be available on the Australian Toshiba page:

  http://www.MyToshiba.com.au/home

  Welcome them

• Strange problem code 39 on my Satellite A500-02J with constant blue screens

  I bought my Toshiba Satellite A500-02J 2-3 months ago and I opened my laptop this morning and I was not connected to the internet and had no installed audio device.

  Then I got a blue screen of death. I restarted my laptop and I went to the Device Manager to see that most of my drivers had the yellow exclamation mark with the super Code 39 error (windows didn't start my drivers for X reason...) and then I had a second blue screen. I was very careful from the beginning with this laptop and I know that this is not a virus since a did not something 'weird' with this computer. Best of all, it's that my USB ports no longer works and I can not backup my stuff important just in case...

  Thank you for helping me,
  Odin

  Hi Odin

  It is not easy to say why this happens, but if there are so many problems, I advise you to install the new OS by using the HDD recovery procedure.
  Try to start your computer in safe mode and delete all data on the second partition.
  Start your laptop with F8 install OS using these instructions - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  When you install the operating system by using this method of HARD drive recovery all data saved on the second partition will not be deleted.

• Satellite A500 - 03P: unable to connect to the WLan using Win 7 + event message

  Hi all

  I recently bought the Satellite A500 with the offer included Windows7 while he was available late October 09.

  So I had the Toshibe DVD for the upgrade and followed the steps and Visa home premium upgrade to Windows 7. Now I have two questions.

  (1) I get a system event Notification after start, talk to me about the system event log. The full message is below.

  Unable to connect to a windows service
  Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service failed

  (2) I was able to use this laptop for the internet before the upgrade, both via a USB wireless drive as well to the office via a DSL modem.
  Now I can't access the internet after the upgarde of Windows 7!

  For example the Optus dial-up box pop up appears commandeLorsque I click on 'connect', it does not connect.

  Can anyone help please?

  Thank you
  C I

  Hey Buddy,

  (1) did you check the Configuration of the Service for this service? The Boot System Event Notification Service type must always be set to automatic. This service is absolutely necessary for Windows and shouldn't t be disabled or set to manual startup type.
  Check it!

  (2) to be honest I never heard on the internet BEFORE, but normally, it should also be possible to access the Internet with Windows 7.
  Make sure that the WLAN or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get on the page of Toshiba.

• Re: Satellite A500/02J-backlit keyboard upgrade

  Hi all

  I just bought an A500/02J but I would replace the keyboard with a backlit keyboard. I found a backlit keyboard compatible to A500 on ebay, but I wonder if the motherboard on the 02J will allow replacement.

  Does anyone know if this is possible?

  Kind regards

  I can't say with any certainty whether these updates is possible but I n t think so. I mean why Toshiba should offer this motherboard with keyboard without backlight.

  Best thing you can do is to call the Toshiba service in your country and ask for help. They have experience with such things, and I think you will get the answer service guys prober.

  If you discover that the upgrade is possible please let us know. This info can be useful for other owners of A5oo.

• Re: Satellite Pro L300 - unable to get into the BIOS or boot

  I have a Satellite L300, who will not get past the POST or the Toshiba start screen. It says to press F2 to enter setup or F12 for the boot sequence, but by pressing buttons does nothing and nothing happens - it just stays there. the HARD drive activity light flashes for a few seconds, then stops.

  I tried the new RAM and a HARD drive different, both with the connected power and battery alone without success!

  someone at - it suggestions?

  Hi jhilton0105,

  Hmm, I think that you have tried everything you can do, and in my opinion, it seems to be a hardware malfunction. Maybe it s related to the motherboard, CPU, module ROM or something else
  I think that your laptop should be verified professional people to get rid of this problem.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Re: Satellite A500-02J - how to disable the internal speakers?

  Hi all

  I use Satelite A500-02J, but when I plug in external speakers, my internal speakers still work, how do I disable it?

  Hey,.

  Normally the internal speakers will be cut automatically if you connect headphones or external speakers. At least on my laptop it of the case

  Hmm I put t know what OS you have installed, but you should check the audio settings. Generally you can cut off the internal speakers if you have connected an external.

  Alternative, I recommend that you update the audio driver. You can find the latest version on the official website of Toshiba.

  I hope that helps! :)

• Re: Unable to get the wireless adapter to work on my Satellite L550-1CC

  I'm getting bored with this laptop, I reinstalled windows 7 (32 bit) and can not get the wireless adapter to work.

  My router settings are perfect, my netbook is zero connection problems - the router is just inches away from the laptop most of the time - the laptop insists that there is "no available networks."

  This of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.

  Windows automatically installed the wireless network - I thought that could be the problem, so I downloaded the realtek driver directly.

  No difference. Always the small icon with Red Cross barred through it.

  I thought it could have been a hot key problem - so I installed the flash card driver that apparently controls the access keys (for some reason any).

  Shortcut keys still don't work - I could really care about that - it's just the wireless network I need.

  Thanks for any help I receive.

  > my netbook has zero connection problems - the router is just inches away from the laptop most of the time - yet the laptop insists there is "no available networks."
  After reading this sentence, I'm a bit confused. If there is no available WLAN networks how your laptop had zero problems to connect?

  One last thing:
  > Of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.
  What is the difference between the old and the new installation of Windows?

  In general the WLAN use is fairly simple.
  Wireless network card - must be installed correctly (listed in Device Manager
  WLAN card - must be enabled using FN + F8 key combination to activate the wireless network card
  -scan the available WLAN networks area, click on the button of your WLAN and use connect
  -put key WLAN if necessary and after a few seconds WLAN connection will work

  I did this many times on laptops preinstalled Win7 and didn't have any problems. On all laptop computers pre-installed with Toshiba recovery image (factory settings) is not necessary to change the WLAN settings.

• Satellite A500 - NVDIDA Windows driver in kernel mode has stopped working

  I bought a brand new Satellite A500-1GL with a Geforce GT 330 M graphics card. Unfortunately, whenever I watch videos in full screen I get the following error.
  "Display Driver NVIDIA Windows Kernel Mode Driver Version 188.29 has stopped working and has recovered"

  The screen turns white and the sound terribly false. I have already uninstalled and reinstalled the Nvidia drivers. It seems that all A500-1GL models with faulty chipset on the motherboard. Toshiba must investigate this matter!

  Help, please

  Hello

  The videos you watch exactly? This happens with all the videos, for example Youtube, DVD, or only with specific files?

  I also GT330M graphics card in my phone but I can t notice any problem with him. I m using the version preinstalled Windows from Toshiba and the last driver display Toshiba official page.
  And you should try updating the BIOS

  Finally and most importantly, another user reported that he could solve the problem if Windows Aero is disabled:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51367

  Check this box!

• Can satellite A500-17 X - I get full speed with router Linksys WRT120N WLan?

  I want to buy a "Linksys WRT120N" for my A500 - 17 X wireless router, and my question is can I get full speed with this router as 100 Mbps or more.
  I don't have as much knowledge on wireless routers and that is why I ask.

  And the other question is:
  This router will give me good signal in my apartment of 60 m 2 from one room to another?

  Hello

  I think your question should be posted in the forum of the manufacturer of the router and not here in the forum of Toshiba.

  Anyway. It seems that the Wlan WRT120N router is certified for
  IEEE 802.3, IEEE 802.3u, IEEE 802. 11 b, IEEE 802. 11 g, Wi - Fi CERTIFIED, IEEE 802.11n (draft 2.0)

  As you can see the supported WiFi standards: 802.11 B, G and N

  For your laptop s Wlan card supports Draft N, you should be able to connect to 802.11 N.

• Satellite A500 PSAM3A - how to get the HARD market under Vista 64-bit disk Protection System

  Hello

  I would like to know how to get the HARD drive Protection system up and running under Vista Home Premium 64 bit operating system. I downloaded the program 64 bit of Toshiba for this program and install it I tried but doesn't seem to work. I have uninstalled and try to install the program, but still does not work.

  Unable to find the problem, why it won't work. If anyone knows how to solve this problem it would be a great
  help for me. If anyone knows how to solve this problem please answer me as soon as possible.

  Thank you for your time.

  Kind regards
  Nigel.

  Hello!

  What you downloaded exactly on the Toshiba site?

  As written Akuma you must install first added value Package you will find also on the Toshiba site. Check this box!

  An interesting thing: it does not work if you are using the preinstalled operating system? It should have everything installed for your laptop.

  Good bye

• Unable to get Windows Update application to work... and all attempts to load updates fail

  Running Vista home Premium
  Service Pack 1
  32 bit OS

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A500-1GL upgraded with keyboard backlight, but do not work

  Hello

  I have a laptop Toshiba A500-1GL.
  I wanted to upgrade with a backlit keyboard, so I went to an authorized Toshiba reseller in my area (Portsmouth, UK) and after checking the laptop, they said yes, it supports a backlit keyboard and it cost around 90 pounds (about 140 dollars) the price of the backlit keyboard and the cost of installation.
  So I said okay, let...

  But the keyboard does not work!
  I went back to the place where I bought, and I asked the guy (yet) "are you sure that my laptop takes in charge the backlit? ... He said yes, and in fact he removed the keyboard and showed me 2 connectors (one to attack the keyboard and fix the lighting cable)

  Then. My computer supports portable backlit keyboard... But it's not working!
  I tried to reinstall the package added value, Flash card... Chipset... almost anything!
  But it still does not (it should work when I click Fn + Z)

  What can I do now?

  I can't return the keyboard, because the guy said "sry its now use!
  So, what should I do? Is there something I should install/remove I'm missing or what?

  Any help will be appreciated...

  See you soon.

  Hello

  What to say either the technician has done something wrong or the laptop is not extensible.

  As far as I know the keyboard lighting is controlled by the BIOS.
  In my case, I can disable and enable it in the BIOS.

  I don't know if your BIOS contain this option, but you could check it
  Please note that each model of mobile phone is supported and some BIOS each BIOS is different.

  In my opinion if the BIOS does not support this feature you so would not be able to activate the lighting, even if the keyboard has been installed.

• Frustrated! Unable to get picture of stacking to work in Photoshop CS5.5

  So. I have read several threads and watched half a dozen videos on photo-stacking in Photoshop, but still can not even a stack of simple two-image to get out to the right.  Here are two representative images, a concentrate of foreground, one for the bottom.  I don't know how many times I opened using methods of the PLC/Photomerge and Scripts/battery, following the steps in various video tutorials; but in both cases, the end result is basically a duplicate of one of the two images, not a mixed with the part of picture of the development of each display.  If someone here can help me to solve this problem, I would be grateful.  Thank you, in advance, for your consideration.

  .

  Something like this should work:

  1 file > Scripts > load files into a battery with attempt to automatically align Source Images checked

  

  2. Select both layers and go to Edit > auto-merge layers and check the Stack of Images and seamless tones and colors

  
  

  
  

  

  
  

  
  

  
  

  

• Unable to get the restore point to work under vista. used to work ok.

  commissioning went haywire and can take 30 minutes and have to use the escape key to bring up the achievable screen. Help.

  Hi Winston,

  Thank you for your advice. Apart from the problam of restore point, there was also a major problam start but I entered the configoration system and activated on start up and this has solved. I'll try again restore then outside the mode without failure, then in the case where the start was part of the problam point and go from there. I will let you know the results. Thank you very much.

  Mark