Windows 7 «fax and scan Windows»

Similar Questions

• Windows Fax and Scan cannot detect Photosmart C4580 all-in-1 scanner connected to the wireless network

  I have no problem printing or scanning when I connect my C4500 to PC via USB.  When connected via my home wireless router I can print OK but can not scan - it's the same for other users and computers.  Windows Fax and Scan gives me the message 'no scanner found. '  I need to work so that all users on my netwrok home can share the scanner.  I use Windows 7 64-bit.

  Thanks Travis_C (HP).  I actually found the solution just before receiving your answer!  I discovered that, although the Solution Center says it would uninstall the existing files before allowing me to reinstall with the latest version downloaded, it didn't remove all the files.  I only discovered this because the new facility has not taken me through the whole fresh installation procedure, he simply asked me what additional features I wanted to install and asked me if I wanted a local printer or network etc.

  I thought that there must be a mistake or problem with whatever existing files were left and the new facility would not correct it.  So I used the control panel to uninstall the existing files, and I made sure that everything was gone.  I then used the last download to reinstall, this time through the new correct installation procedure, and everything now works perfectly.

  With this method I always had a problem on another PC, giving me the same problem I had before.  I realized that this was due to a USB dongle connected to the PC to a wireless keyboard that seems to affect the installation.  When I removed the dongle installation worked again perfectly, and I now have full printing and scanning ability on all PCs.

  I think the installer for this printer wireless (and perhaps others?) should be updated to solve the problem, and also the center of Solution must be fixed to ensure that if you uninstall the software it should not leave anything.

• Scanning with HP all-in-one printer with fax and scan Windows in Windows 8

  When you install a printer driver in Windows 8, you can scan from your computer without having to install any additional software to HP. This is particularly useful if you want to or not does not require the full functionality software or if your printer does not have a driver to scan for Windows 8.

  Windows Fax and Scan uses a Microsoft Service called WIA (Windows Image Acquisition) to capture an image from the scanner and allow you to save without the need for additional drivers.

  In addition, Windows Fax and Scan cannot scan to PDF.

  Learn how to analyze with your all-in-one printer from HP using Windows Fax and Scan.

  If you have problems using Windows Fax and scan with Windows 8 make a post below. I hope this helps anyone looking for an alternative method of scanning in Windows 8.

• Windows Fax and Scan "Sender Name" empty (Windows Server 2008 Standard)

  Hi all

  I am using Windows Server 2008 Standard (32-bit) with a RocketModem III card.  I have the latest drivers for the RocketModem.

  Using Windows Fax and Scan, I can send and receive faxes fine.  The only problem is when I see the fax, the name of the sender is blank.  I am trying to display the telephone number that someone sends me the fax to.

  I had thought it might also be under CSID, but everything I have complete options because it puts there.  I guess that means I want the CSID show for all those who sent faxes to me.

  It might be worth noting that I have active CallerID and you have a real fax machine that shows the incoming number very well.

  Does anyone have an idea where I could go wrong here?  Thanks in advance for the help!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How to use Windows Fax and Scan if a modem has not been built in my PC?

  Original title: fax and scan Windows

  Why bother to preload a tower PC with windows fax and analyze if the PC has a modem and in fact does not even a wireless receiver.  When an ordinary user like me go buy the adapter wireless and go buy the fax modem, it's like going to a car dealer and make them ask ' you want this car with tires and wheels, or even that it is? »

  
  So when you go to Best Buy and Staples to find a fax modem for this PC HP who did not, and what they have is a Zoom modem that works work, WHAT ARE SUPPOSES to DO THEN?

  It is hardware problem, not an operating system. Windows does its part by providing the software needed to complete the job.

• Windows Server 2008 fax and scanning... .cannot connect fax modem

  Hello

  I am running Windows Server 2008 R2. Recently, apparently after you install some automatic updates when the server unexpectedly shut down several weird errors are produced on the machine. First to be noticed was that faxes were more to be received. While they inspected more, the fax service had stopped working and could not be restarted, such as the Windows event log. After searching for some time, a solution was found here: http://social.msdn.microsoft.com/forums/en-US/windowscompatibility/thread/c75ae899-d05b-411d-a7f2-00fdd33b8589/

  Fix Subinacl.exe described in the post didn't work, but deleting a corrupted windows journal file did, and the diary of events and fax services would begin again.

  I thought that my problem was resolved, but the fax service is still broken.

  Trying to set up the server to receive faxes with Windows Fax and Scan, once more, as he had done very well before, I came across another error. What the first implementation account fax by following the Wizard launched by selecting "new fax" for the first time, or through the tools-> accounts-> options for adding fax, the mistakes of the wizard with this message: "there was an error in setting up the account. Please contact your administrator. " After reviewing several other forums (this issue has been much more difficult to find information on then the first described error), this solution seemed to be what has pointed out several positions:

  http://www.Vistaheads.com/forums/Microsoft-public-Windows-Vista-print-fax-scan/50649-fax-account-Wizard-error-2.html

  This solution involves deleting the registry keys for accounts via regedit. I tried this, and it did not work.

  It doesn't seem to be that much more that I can do. I was ready to try a restore of the system on the server, but apparently there were not a restoration of recorded images, even if this isn't an option.

  Are there any other fixes documented for this?

  Hi JaredGohr,

  I suggest you to send your requests in the link for better support below.

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

  I hope this helps.

• Fax and scanning of the missing pages of Windows

  I have been using Windows fax and scan on SBS 2008 for a few months. Now I find that if someone sends me a fax of 5 pages for example I receive 2 pages. where are my other pages?

  Hi ITguyKent,

  Since you are facing problems with Windows Small Business Server, you can post your request in the following forums.

  Small Business Server Forum

• Fax and scan Windows

  For scanning, I prefer to use Windows Fax and Scan rather than the Canon's own scanning software.

  When I got Windows 7, I could add my MP990 multifunction analysis component to the control panel (devices and printers as a separate unit). This allowed Windows Fax and Scan to recognize the component analysis of my MP990 and scan him.

  I recently did a clean install ("custom") of Windows 8. Unfortunately, I do not remember how to configure the component analysis of my MP990 all-in-one as a separate device and now Windows Fax and Scan does not recognize that I have a scanner.

  Please note:

  • I have already installed the latest driver for my MP990.
  • The printing of my MP990 component works perfectly.

  Someone would remind me please how to configure the component analysis of my all-in-one printer in devices and printers so that Windows Fax and Scan will recognize my scanner and scan from it. Thank you very much.

  From my research, I can tell you that it is one of the most frustrating problems with MFPs. I am happy to say that I discovered the solution, after a lot of experimentation.

  The first thing to know is that Windows Fax and Scan uses Windows Image Acquisition. Therefore, your printer must have a WIA driver. According to this article in the knowledge base on the Canon Website:

  Which inkjet multifunction printers are supported on Windows 8?

  Windows 8 has a native WIA driver for the Canon MP990. It's just a matter of persuading Windows 8 to install the driver.

  In addition, it is useful to check if the Acquisition of Image Windows service is running, but it almost certainly works.

  If you have already installed the Canon MP990 then it appear in devices and printers as a printer. I discovered that, in my case, the MP990 is only installed as a printer. You want to be installed as a printer and a scanner.

  To do so, go to devices and printers, and follow these steps:

  1. Select "add a printer".
  2. Click on ' the printer that I wan't is not listed. »
  3. On the next screen, add your MP990 printer by any method there is.
  4. Let Windows install the MP990 (again). Since the MP990 was already installed as a printer, the only thing left for Windows install is the scanner.
  5. After you are finished, you will see two icons for the MP990 in devices and printers. If you just click on each icon in turn and look at its description in the status bar, you will see that an icon says "category: printer" and the other icon "category: printer; Scanner' Bingo! You have now installed the scanner.
  6. Remove the icon that says only "category: printer" [click the > remove the instrument]

  Now you can scan with Windows Fax and Scan.

  I don't know why my MP990 himself initially installed as a printer only. However, I figured out how to get Windows to install the scanner as well. I hope it will be useful to someone else.

• HP Officejet Pro 8500 has more: I need help to setup windows fax and scan on a network wireless home

  I'm stuck in the box of / address of the fax server in the Windows Fax and scanning configuration wizard. Where can I get this information? I think I can finish with this info.

  Hello

  Windows Fax and Scan allow scanning from Windows, fax of the printer can be done by the HP Officejet Pro 8500 A910 software or Print Fax - printer HP Officejet Pro 8500 A910.

  Windows Fax and Scan to allow fax when your PC is equipped with a fax modem that you can find below:

  http://Windows.Microsoft.com/en-us/Windows/set-computer-send-receive-faxes#1TC=Windows-7

  Follow page 58 of the user guide below to send a fax from your computer using the HP device all in one:

  http://h10032.www1.HP.com/CTG/manual/c02668142

  To receive faxes on your PC follow the section "to set up fax to PC (Windows)" on page 69 of the instructions.

  Kind regards

  Shlomi

• Don't know where to find Fax Server when Windows Fax and Scan in Windows XP Setup

  I'm trying to set up windows fax and scan to receive a fax, but I do not know how and where to find a fax server?

  Hi C.V,.

  Method 1: Follow the steps mentioned in the article below toenable and configure the fax service

  How to enable and configure the fax service in Windows XP
  http://support.Microsoft.com/kb/306550

  
  Method 2: consult the steps mentioned in the article below in order to send a Fax

  How to send a fax in Windows XP
  http://support.Microsoft.com/kb/306657

• Windows fax and scan without adding contact

  I use Windows Fax and Scan to send a quick fax to someone.  In the dialog box "New Fax", you can enter a name of my address book Outlook or to a phone number.  I would like to enter a name and a number for someone who is not in the address book without having to create a contact for them in the address book.

  The cover page editor allows me to insert the two {name} and {recipient Fax #}, so I expect to be able to enter this information when I send the fax.

  Thank you.

  JerryK

  You do so by using a one-off Fax address as indicated in this article:

  How to use the Windows 2000 Fax Service to initiate a mail merge in Outlook 2002
  The names that you insert in the cover page editor cover fields in your address book to be filled in by the address book when you select a default contact.
  HAL

  --

  HAL Hostetler, TCE

  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX

  www.kvoa.com--KVOA TV, Tucson, AZ.

  Concert at the Hot Licks - www.badnewsbluesband.com

• Windows Fax and Scan does not appear in the start menu

  : I'm using Windows Vista Home Premium and you want to (a) send faxes via a modem local fax and b scan docs from a local scanner. I mean, there should be a program Windows fax and scan shown in the start menu. I clicked all programs on the start menu, and it doesn't always show. Suggestions?

  From: Hal

  Fax and scan is available in Windows Vista Business and Ultimate editions, it is not available in any of the Windows Vista Home editions.  Since you have a version of Windows Vista Edition family, the only option of fax is a third-party product.  These products work under Windows Vista:

  Snappy Fax

  http://www.snappysoftware.com/

  RKSFax

  http://www.rkssoftware.com/rksfax/overview.html

  VentaFax

  http://www.VentaFax.com/

  FaxTalk FaxCenter Pro 7.5

  http://www.FaxTalk.com/products/ftfcp/index.htm

  I have seen reports that the free version of BVRP also works with Windows Vista:

  http://www.usr.com/BVRP/bvrp.asp

  BVRP PhoneTools

  Given the above comes with the new USR modem, I don't know if it will work with no - USR modems.  Alternatively, you can send faxes via your Internet connection provided you are willing to pay for an Internet E - Fax service:

  http://www.slipstick.com/AddIns/services/fax.htm#internetfax

  Personal Fax Services - Internet Fax

  http://www.Savetz.com/fax/

  Another response of the community of Windows Vista discussion groups

• Contacts lost in Windows Fax and Scan

  I have a file of contacts, but it is not visible in Windows Fax and Scan. How to bind Windows fax and Scan of my contacts?

  What program your contacts take place in?  Contacts Windows is the default fax and scan value if Outlook is installed on the machine.  With Outlook installed, it becomes the default fax and scan uses Contacts application and some settings in Outlook can prevent his Contacts to appear.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Windows fax and scan help

  Original title: I have problems to install my fax and scan for my lexmark x 5650 options.

  I'm trying to connect my windows fax and scan to my lexmark x 5650. Help, please

  Hello

  ·        What is the exact error message that you experience (if any)?

  ·        You have installed the printer on the system and you are able to print documents?

  ·        What do you do, fax/scan?

  ·        The device appears in the devices and printers?

  Follow the steps mentioned below to check if the printer is listed in the devices and printer.

  1. Click Start and select Control Panel from the list.

  2. Locate the devices and printers and click on it and check if the device is listed in this window.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to find fax and scan Windows

  Windows Vista Home Premium computer, need to send a fax, the first time on this computer for 3 years.  I installed everything and ready to go.  Cannot find Windows Fax and Scan.  I looked in the start menu, the Windows folder, but could not recognize it, I looked in the Windows features turn on, not here.  I inserted the disk to install system that had he not been installed initially, but risk wiping the disc stopped.  After reading the forum, I also tried to launch wfs.exe, but not found.  So now, where is it?

  Bob

  Unfortunately, Windows Fax and Scan is not included with Vista Home Premium. It is only
  included with Business and Ultimate.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/Windows-fax-and-scanning/3ba1dd59-3cfc-40D6-ab4e-be43c53c601a

  Try Google for 3 third party programs.

• Disable Windows Fax and Scan - can anyone help?

  I am running OS Windows Vista Business 64 - bit on a lenovo T500 with 4 GB of RAM.

  Inadvertently, I installed Windows Fax and Scan. This program continutes pop up telling me problems at times and at other times what it says it is ready to send faxes. This pop is boring. It's as if I've been disconnected from the internet and he needs my password again.

  At this point, I need to turn it off so that I can get my work without this constrant irritation. How can I disable this feature?

  Look here:

  http://www.howtogeek.com/HOWTO/Windows-Vista/remove-optional-and-probably-unnecessary-Windows-Vista-components/ Rob - bicycle - Mark Twain said it is good.