Windows 7: installed XP virtual window. Get Enable integration featuresfailure on start up.

Similar Questions

• When I try to install my software, I get an error message that "Windows Installer could not be accessed".

  Issue of Windows install

  I just bought a HP Photosmart printer and I am trying to install the software on my computer. (OS is Windows Vista.) When I try to install my software, I get an error message that "Windows Installer could not be accessed". I ran "msconfig" and found that the Modual from Windows Installer status is stopped. How should I proceed?

  Thank you, Jeanne Vecere

  You could try to go to the MICROSOFT website, go to KNOWLAGE database and in the search bar, try the search for WINDOWS INSTALLER. Look for any version that is newer than the one you have. If this fails, try searching on GOOGLE. You can also try to do an update to WINDOWS VISTA.

  IF YOU ARE RUNNING 64-BIT WINDOWS, MAKE SURE YOU PRINTER WORKS WITH 64-BIT.

• Whenever I try to install a program I get a message that a program being installed. Which includes all updates to Windows. How can I fix this problem?

  Whenever I try to install a program I get a message that a program being installed.  Which includes all updates to Windows.  How can I fix this problem?

  Hello
  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/822798

  It will be useful.

• unspported functioning after you install Microsoft Virtual PC 2007 on Windows 7 64 bit SP1(64bit)

  Hello

  I installed Microsoft Virtual PC 2007 SP1(64bit) from here

  However, I met this errro:

  

  If the host operating system is Windows 7 Ultimate 32 bit, you cannot load a 64-bit operating system in the virtual machine. The host operating system must be 64-bit to run 64-bit virtual machine.

  Also, if you are running a 64 bit version of Windows 7, then you need to make sure that you have selected the right architecture of Windows Virtual PC on Windows Virtual PC download page.

• I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  Hello

  You can use the Windows 8 Compatibility Center to find out if a device is compatible.

  Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT:
  http://www.Microsoft.com/en-us/Windows/compatibility/WinRT/CompatCenter/home

  FAQ - Windows Compatibility Center:

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/FAQ

  Concerning

• When you try to install 6 Lightroom I get a box that says is not supported by Windows Vista.  I don't have Vista I have Windows 7

  When you try to install Lightroom 6 I get a box that says it is not supported by Vista.  I don't have Vista I have Windows 7

  Hello

  This link might help: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported

  Kind regards

  Sheena

• Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» PLEASE DOWNLOAD A

  Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» Please DOWNLOAD ADOBE SUPPORT ADVISOR TO DETECT THE PROBLEM. "then I tried to download the Advisor to support that to find it is no longer available. Accept payment until this problem is solved we know how to solve this problem?

  first of all uninstall cc on your computer.

  Run the vacuum cleaner by, http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer and reinstall the cc, Download Adobe Creative Cloud apps desktop application | CC free trial Adobe

  If that translates into the same initialization error:

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• After clicking on "Download", nothing happens in Windows 8 - where the 'Run' or 'Start' to install it?

  new computer with Windows 8.
  attempt to download Firefox
  After clicking on "Download", nothing happens in Windows 8 - where the 'Run' or 'Start' to install it?

  Hello lashaw1002, windows 8 is not yet registered as an operating system supported
  https://www.mozilla.org/en-US/firefox.../system-requirements/.
  If you are able to install and run firefox, there will be many problems of stability and other oddities since there are still some integration work required to get firefox on windows 8.

• I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I want to erase the hard drive and use it to install windows xp.

  From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.

  Does not help, but could help to point you in the right direction...

• After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

  Original title: screen saver does not start because MSVCR100.dll was not found

  After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

  ScreenSaver: Photo screensaver.scr - unable to locate component.

  This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

  The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

  Help, please. Thank you.

  Hello

  It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

  But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I get an error when I start up windows.

  I get this error whenever I start up windows. http://i.imgur.com/CQ3mDUP.PNG

  Caused by a program that you have installed, a game or crack maybe?

• I got my product key Windows 7 enabled on my computer, then my hard drive crashed, so I had to reinstall Windows on a new hard drive. He is now not letting me turn it back on.

  original title: activation problem

  -I got my product key Windows 7 enabled on my computer, then my hard drive crashed, so I had to reinstall Windows on a new hard drive.  He is now not letting me turn it back on.  What should I do?  I don't want my computer or Microsoft thinks I use a version of Windows

  It is Windows 7 Home Premium, and I my here in front of me activation code.  But it is to say that it is not valid.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen

  I have a Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen with a blinking cursor. I ran all the tests start and everything this past. I tried all F8, F9, F10, F11, recovery options with no luck. I tried to start with the ERD Window 7 64 bit I created when I install the laptop. Nothing... I did it with all the disconnected device. No luck. I'm looking for all the options until I re - install windows. I started with the Windows 7 recovery DVD and it reads, but I cancelled the process because it will reformat the hard drive and I expect to work around all the hassels of having settings to reinstall the software, etc.. Any ideas would be welcome.

  Thanks for the reply. I already tried these steps. I created a bootable floppy that I can get the data on the hard drive and am trying to restore windows to the recpvery of the DVD system that I ordered with the computer. Thank you

• Windows 7 takes 15 min to start after installing Labview 2012

  Hello

  I need help on this, is this a bug?

  The problem is that on my laptop after installing Labview 2012, it takes about 15 minutes to start, this happens every time a restart or start my laptop.

  At first I thought something with my laptop, but then my colleague also installed Labview 2012 on his laptop and has exactly the same problem, the difference is that his new laptop and is running windows 7 Professional 64-bit, mine is older and is currently running windows 7 32-bit professional.

  I tried to disable the services NOR, but has not solved the problem, but when I disable all windows services that start at startup, the startup is fast.

  Also note that I had Labview 2011 installed before and I didn't have this problem before.

  Tried also to find something in the registry, but nothing.

  Any who have this problem, or a solution to this?

  Thanks in advance

  This problem seems to be resolved, but then he come back again a few days later

  I did many tests in my laptop and found it to be in the "Service of Network Store Interface" service (INS). Disabling this service, you have your problem solved, but there is another problem, you lose the network.
  This happens because the "DHCP Client" service depends on the national statistical institutes.

  Also, this issue seems to occur only when the PC is in a domain and I'm in a windows server (Windows SBS2008) domain.

  Then I found that if you set manual this services which depend on national institutes of statistics (DHCP Client, DNS Client, IP Helper, network connections, local awareness network) and also put INS manual
  You must also disable the "Workstation" service that also depends on national institutes of statistics (why turn off? Because there are 3 services that depend on the workstation service, they will require to start, and then it will force NSIS to start, then long boot, if you really need of the dependent services on workstation, do the same as for them)
  Not also need uncheck this services in msconfig window if they are checked, and then the PC will boot normally without a network.

  When you start, you should go to services and start the DHCP Client for the network (and the other if you really need)
  This will force also NSIS to start and other services that depend on the national statistical institutes.
  The first time the PC restarts, you may need to reset these services to manual in the services window, I had to do, and then in sebsequent boots, they have been already set to manual
  If you leave right on the dependent services in automatic or automatic (delayed start) it will force NSIS to run and start time will go to + - 15 min

  Because you must manually start "DHCP Client" for the network, here's a solution to do it automatically after have connected you:
  1 - Go to control panel, and then open administrative tools
  Task 2-open Scheduller
  3. on the right click "Creat fundamental task.
  4. in the first window give a name ("DHCP" for example) and press next
  5 - Click on "When I Logon" and press next
  6 - click on "Start a program", and then press next
  7. in the "program/script" insert: net
  8. in the "Arguments" insert: start "DHCP Client".
  9 - Press 'Finish' and you're done