Windows 7 is not compatible with the new Norton SystemWorks Prime Subscription

Similar Questions

• I have a Belkin USB peripheral switch I used with my PC or my wife. I just replaced his PC with a laptop with Windows7. The driver is not compatible with the new op system. You or Belkin have download free fix or pilot?

  Driver is not compatible with the new op system.  You or Belkin have download free fix or pilot?

  www.Belkin.com

• Photoshop is not compatible with the new camera

  I've had my laptop stolen a few months ago, so I lost my Adobe's Suite. My boyfriend managed to get my photoshop and ambient light on my laptop, but I now have a D810 Nikon which is not compatible with the versions that I have. Any suggestions on how to proceed so I can edit my files?

  What version of Photoshop you have. You need CS6 or superior and Camera Raw 8.6 or higher to read the files. Otherwise, you can use the free DNG Converter

• Office jet 6500 HP has more: printer is not compatible with the new computer

  Hello!

  I recently bought a HP Pavilion desktop computer and connected to my all in one HP officejet 6500 a more printer. I tried to use the scan function and a message informing that no computer has been detected.  I tried to install the CD however, a message appears indicating that the operating system on this computer was not supported.  Message continued, "the software can be installed on computers running the following systems, Windows XP, Windows Vista or Windows 7" (my old computer that was connected to the printer work with Windows Vista). The message advised me to upgrade the operating system on this computer or install this software on any other computer system.  I don't know what to do to get this printer compatible with my new computer.  Is this possible?  Help, please!

  Hi there lavlock, RnRMusicMan is absent today. With 48 hours removed from this post, you are still in place and scanning? If so, I've always been a strong supporter of, 'if it ain't broke, don't fix it. "

• Windows 7 does not start with the new msi motherboard

  Yesterday, I bought a new motherboard, processor and 8g of ram in my computer. After all what adjustment and replacement of my old motherboard with the new, I started my computer to find that Windows 7 unbootable not. Instead of windows 7, I get the screen click on BIOS II (2). The configuration screen allows me to launch Winki but not Windows 7 because it was not found. The motherboard came with a utility disk drivers msi and AMD chipset which, when inserted in my hard disk, loads up to Winki. This version of windows 7 (Home Premium 64-bit) came pre-installed with my old mother/computer(Thus, I do not have the windows 7 installation disk) card. Is there a way I need to activate Windows 7 on my new motherboard?

  Hello

  Well, you have some problems. First of all, with a new motherboard you need a new copy of Windows - not only the DVD, but a whole new product key must be purchased. It's just the terms of the license: a new motherboard is equivalent to a new computer, and each computer must have its own copy of Windows.

  So where you buy your copy of Windows 7, I would make sure that it came with a DVD image. Otherwise, you can tell us which version of Windows 7 you (will) actually buy, and we can send you a link to the copy of the DVD for this version of Windows 7.

  To purchase a copy of Windows 7 you can check Newegg.com, here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&Description=windows+7&N=-1&isNodeId=1 .

  I hope that answers your question.

  Kind regards

  BearPup

• What can do XP Pro SP3 OS be upgraded into without loss of programs (though of course, some are not compatible with the new operating system) and user files and info?

  Operating system
  MS Windows XP Professional SP3 32-bit
  CENTRAL PROCESSING UNIT
  Intel Pentium M 740
  Dothan 90nm technology
  RAM
  1.50 GB Single-Channel DDR @ 166 MHz (2, 5-3-3-7)
  Motherboard
  TOSHIBA ECU00 (U1)
  Graphics
  Monitor Plug-and-Play (1280x768@60Hz)
  Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family
  Hard drives
  97 F TOSHIBA TOSHIBA MK1032GAX (PATA) 43 ° C
  Optical drives
  MATSHITA DVD - RAM UJ-YEARS 840
  VUNSH ZC5QZWX SCSI CdRom Device
  Audio
  Realtek AC97 Audio

  Hello

  Vista is no longer sold by Microsoft.

  Microsoft now sells Windows 7.

  You can't do what you want to do.

  "Upgrading from Windows XP to Windows 7"

  Introduction

  To upgrade your Windows XP computer to Windows 7, you will need to select custom during installation of Windows 7. A custom installation keeps your programs, files or settings. It is sometimes called a 'clean' for this reason installation.

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here's more information to consider before upgrading;

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• Plugin Eclipse 2.0.4 is not compatible with the new ADT 23

  Cannot update ADT 23 up to what the BB plugin 2.0.4 is installed. After uninstalling and updating the ADT, impossible to install this return.

  The error is

  Lack of requirement: BlackBerry plug-in in Eclipse for Android Development 2.0.4.201405221110 (net.rim.ajde.feature.feature.group 2.0.4.201405221110) requires "com.android.ide.eclipse.adt.feature.group 0.0.0", but it is not found

  As you have discovered, our plugin is not currently compatible with ADT 23.  We are working on an update, but in the meantime you can downgrade back to ADT 22.x.

• How to return to a previous version of firefox? I've recently updated to 8, but there are a few extensions for my work which are not compatible with the new version.

  The extension I need should be compatible with versions 6 and 7.

  Hey ZachLynn,

  There are many benefits to the latest version of Firefox. What extension Miss do you?

  If you want to roll back to a previous version of Firefox, just take a glance section of the Knowledge Base install an older version of Firefox.

  Hope this helps!

• Google Chrome is not compatible with the new wifi of my house while my other browsers (firefox) work fine with it.

  an error message appears when I try to open chrome. chrome works on other networks, but not my house. Im not sure what to do and I need help.

  Hi Adam,.

  Thank you for reaching out to the Microsoft Community.

  According to the description, it seems that you get an error message while trying to open Google chrome on the computer.

  I suggest to check the following link and check if it helps.

  http://support.Google.com/chrome/bin/static.py?hl=en&topic=14684&page=table.cs

  If the problem persists, I recommend you contact Google Chrome support for assistance on this issue.

  http://support.Google.com/chrome/?hl=en

  If you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.

   

• I'm told my iPod classic is not compatible with the latest version of iTunes and I need to buy a new iPod

  I have an iPod classic, 160GB, 2009 (I think that I bought in 2011, but they say it's a 2009 version).  I took good care of her, and it worked wonderfully for me.  Recently, with the latest updates of my OS, iTunes, etc. on my MacBook, I got the iPod synchronization problems.  This last time I tried, the iPod has not been recognized by iTunes, or it would be recognized and switch between connected and synchronization, but never go further.  Finally, if I left it long enough that, it would eventually be sync, but then he would go back and forth between sync synchronization, connected and finishing.  After leaving he did that for a while, he would finally come with an error message saying that the iPod could not be synchronized.  Then my iPod was erased at all to this subject (everything is always on my iTunes at least library).  I tried to restore my iPod, which she did, and then synchronize everything again.  He went through the process of synchronization, only to say in the end could not be synchronized.  Sometimes my iPod not even be recognized by iTunes.

  So I called Apple Support and they told me that my iPod software is not compatible with the iTunes software.  Both were up to date, so I think I 2.0.4 on my iPod and 12.3.2.35 on my iTunes.  Apple told me that I can't go back to an earlier version of the iPod software because I have no iPod backups on my iTunes.  Therefore they told me the only solution is to spend $ 400 on a new iPod, which I can't afford to do it, nor have you I feel it's a reasonable solution, since my iPod is perfectly good and I was very careful care of her.

  Is there anything that can be done to make the two compatible?  Can I download an older version of iTunes?  I'll be able to get my most recent iTunes library on the older iTunes?  Should not continue making it compatible, the iPod classic and iTunes since so many people use iPod classic, and they are the only thing like him around?

  I looked in the other forums on the topic, but nothing seems to talk about this compatibility problem and provide a solution.  Someone at - it ideas?  Can you manually manage your music on your iPod, even if the two are not "compatible"?

  Thank you!

  So I called Apple Support and they told me that my iPod software is not compatible with the iTunes software.

  Seriously...?  My 'classic' 3rd gen iPod in 2003 still works fine with the latest version of iTunes and the latest OS X.  Even the original iPod should still work (assuming the iPod itself still works).  Your iPod classic 2009 is certainly consistent.  That support the needs of the person coming back through training...

  When you connect it now, it seems in iTunes?  Are you able to select in iTunes, go to the settings screen, where you see the iPod photo and name in the upper left corner of the window and a box below that?

• Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

  Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Question
  Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Firefox 9 is Compatible with Norton 2011, 2012, 360 v5. See:

  • http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-9-support-for-Norton-toolbar/TD-p/615563

• Windows 7 Professional is not compatible with the WPS ENABLED?

  Hi all:
  I have a desktop (HP Pro 3500 Series) with Windows 7 Professional and another laptop (HP COMPAQ CQ58) with Windows 8, 1 pro.
  My internet provider is Jasstel, and it worked perfectly in my two computers.
  I decided to activate the WPS of the router (comtred AR 5387un) and they started the problems. The laptop with Windows 8, 1 runs normally.
  The desktop with Windows 7 without work and it does not allow the connection to the Internet. The generated error is security configuration, it is incorrect.
  I erased the net so that I have again the password. You ask that I introduce the safety key from the net. I introduce the key (which she's right, because it works in another computer), and he told me that I should he Nail or the sentence of the password is not right and there is not the case.
  The only thing you change is the operating system. Windows 7 is not compatible with active WPS?
  I thank any help no I don't know what to do.

  A cordial greeting.

  Text of the Decree No. presidential East I translated it with a commercial translator. I am ignorant of the quality of the translation. Excuse me, otherwise it is all about what is good who do.

  Hello colambrero,

  This model is a class computer business and would be better asked in the forum of the Business Enterprise community.

  Here is the link to the appropriate section. http://h30499.www3.HP.com/T5/business-PCs-Compaq-Elite-Pro/BD-p/BSC-271

  I offer you my thoughts.

  I was wondering why you have decided to activate the WPS? It's easier to connect wifi devices but also creates security problems.  WPA2 with a good password is more reliable in my opinion.

  In addition, your Wifi adapter must be compatible WPS and I can't confirm if your model has one or not (I assume it does).

  Windows 7 that has Service Pack 1 installed? SP1 has a fix for problems with connections WPS for Windows 7.

  Personally, I would consider not not using WPS for security issues.

  Here is an article to example of Sophos Security explaining why not to use WPS.

  http://nakedsecurity.Sophos.com/2014/09/02/using-WPS-may-be-even-more-dangerous/

  It will be useful.

• Running game - this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program

  I'm having the same problem that is described in this topic: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/f15edea1-f88f-492e-bb42-4db2b06fdf05

  My error message is: "this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program and then contact the software publisher. »

  I tried to run the program in question (Castle of the winds) in each mode of compatibility that is on the list and it is giving me this error message every time. Other people have managed to get the program to work, so I don't know, it does not work on Windows 7, but I can't make it work for me.

  Help?

  Hi autohaptic,

  (a) on the computer what Edition\Version of Windows 7 operating system do you use? What type of system? 32-bit or 64-bit

  If you are running Windows 7 64-bit operating system, you can install the 64-bit computer game program.

  (b) on the computer which the castle of the winds game version are you running?

  I want to clarify, if you try to install the program or trying to run.

  Step 1: Put the computer in a clean boot, and then try to run the game

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  You can consider the right version of the game for your computer relocation program.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• During the installation of Microsoft Flight Simulator 2004, the following error occurs: the version of this file is not compatible with the version of Windows you are using.

  Former title: Microsoft Flight Simulator will not install on Windows 7

  I have Windows 7 Home Premium 64-bit.  I try to install MFS 2004.  The first 3 discs work fine, but when I insert disk 4 to complete the installation, I get the following error message:

  "The version of this file is not compatible with the version of Windows you are using.  Check your computer's system information to see if yo need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I have a Dell Studio 1558

  Intel i5 - 520 M

  ATI Mobility Radeon HD 5470 graphics card

  8 GB RAM DDR3

  What can I do?

  Hello
  
  1. which edition of Windows are you using? Is - this edition is 32-bit or 64-bit?
   
   
  Given that the game is compatible with Windows 7, I suspect that the conflict can be 32-bit or 64-bit architecture.
  The link below shows the compatibility of this game with Windows 7.
  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Software&p=Microsoft%20Flight%20Simulator%202004%3A%20A%20Century%20of%20Flight&v=Microsoft&uid=&pf=1&pi=3&c=PC%20Gaming&sc=Simulation%20%26%20Driving&os=64-bit
   
   
  Method 1.
  We must ensure that the edition of the game must correspond with the operating system.
  If you use 64-bit in this game, you need the 64-bit Windows to install it.
  Method 2.
  If the above information matching I you recommend to start the computer in clean condition and then try to install the game.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.