Windows 7 key not accepted

Similar Questions

• Windows Vista does not accept my password (unchanged) but I have no recovery disk - Windows is already installed

  Hello

  As the title says after using my laptop without any previous problems, suddenly I can not connect on Windows Vista.

  I'm 100% sure that the password has not been changed, caps lock, shift, caps lock Num etc is not active.

  When I bought the laptop, Vista was already installed, so I don't have a recovery disk.

  Any help would be appreciated.

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  This is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Malware can also cause problems with passwords:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the above does not fix it:

  Here are the different methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• my windows xp willl not accept the lifecam 3.5 software

  my windows xp willl not accept software lifecam 3.5, I installed the software on a laptop vista without any problems, help

  Hello

  1. what exactly happens when you try to install the LifeCam 3.5 on the computer software?

  2. you receive an error message when you install the software?

  3. What is the serial number and model of the webcam LifeCam?

  See the link below and try the steps mentioned to update drivers manually and registry entries, check if it works.

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  As mentioned in the article above of Microsoft to install the updated drivers, make sure that you select the correct camera model.

  Method 2

  If the previous step fails, and then connect to another computer and check if it works.

  For further assistance, you can contact Microsoft hardware support.

  http://support.Microsoft.com/hardware

• Hello microsoft xp is to continue to tell windows xp key not valid im wondering to which I could talk to?

  Hello microsoft xp is to continue to tell windows xp key not valid im wondering to which I could talk to?

  Start the Activation Wizard and take the phone option activate.

  When the auomated service asks you what service you need, do NOT respond. This should force the operator to pick up.

• Windows Vista will not accept my passowrd even if I put the password in. What should I do? I can't get into what it is.

  Windows Vista will not accept my passowrd even if I put the password in. What should I do? I can't get into what it is.

  Hello

  This article describes how to use the system restore feature to log on Windows 7 or Windows Vista when you lose access to an account.

  http://support.Microsoft.com/kb/940765

  If the above does not work

  I'm sorry, but we cannot help with forgotten passwords

  It is a policy of microsoft in these forums

  you need to reinstall vista

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• Windows 7, will not accept an XP program, with on a d3drm.d11... How to fix... Thank you

  Windows 7, will not accept an XP program, with on a d3drm.d11... How to fix... Thank you

  Hi Ron,

  To provide the proper resolution, that I would need more information on your side.

  1. What is the name of the program that does not open?

  2. What is the accurate and complete error message?
  3. when, exactly, you get this error message? It is by running the program or the installation of the program?

  This problem can occur if the program is not compatible with Windows 7.

  Method 1:
  I suggest you try to open the program in compatibility mode. Check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Method 2:
  If the problem persists, you can try to install XP Mode and then try to run the program in XP Mode.

  Note: XP Mode only works with Windows 7 Professional and ultimate edition. Try these steps if you are using Windows 7 Professional and ultimate edition.

  Windows XP Mode
  http://Windows.Microsoft.com/en-in/Windows7/products/features/Windows-XP-mode

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• Windows 7 will not accept any ati driver and catalyst control center at the same time.

  I tried a number of ati drivers. My card is a 4870 x 2 2 GB edition. The driver that windows installs will not accept any CCC.

  I did also install CCC and only driver left. I tried to play Everquest 2, first game to install, and it crashes before the charge, gives me an error of ref dx9.

  I'm assuming that windows 7 has the new package dx so I shouldn't have to reinstall that. I downloaded some of them however.

  I'll try a restore and see if it works. If I could go back in time and never bought this o/s I now.

  This is ridiculous.

  Windows 7 DirectX 11.  You can also download and install v9 and have both at the same time, which is what I have on two different computers for this reason.

  Press the low a 3rd to: http://www.microsoft.com/downloads/en/resultsForProduct.aspx?displaylang=en&productID=9C954C37-1ED1-4846-8A7D-85FC422D1388

• request for upgrade windows 7 to windows 8 do not accept Canadian postal code

  request for upgrade windows 7 to windows 8 do not accept Canadian postal code

  Hello

  This problem would be better suited to be managed by the sales and support. Check out the link.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_Us

• Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How to install my versions?

  Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How to install my versions?

  Hi Tuulah6441378,

  Photoshop 4 and 7 are very old versions, downloads for them are no longer available and the operating system you are using is the most recent, so there will be compatibility problems.

  Adobe has not tested these applications on newer operating systems.

  Please see, historical version of Adobe Photoshop - Wikipedia, the free encyclopedia

• Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How can I manage my versions to download?

  Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How can I manage my versions to download?

  The download, it's what you do to get a file from a Web site to your computer... Installation is what you do to have the installation files to put a program on your computer and the link to your operating system... what you do... Download or install?

  If you mean that Win10 will not allow you to INSTALL the program, read below

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions... said FULL yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• Product key not accepted when you try to install Windows XP.

  Windows Xp reinstall the product key invalid pop up

  OK, so here starts my road of woes. First of all, I got a problem with a driver updated on a COMPAQ DeskPro ENS P866. It complements removed all the sounds of this PC. I tried every fix on every techie forum goes without result... including uninstalling, resettlement (thanks to automatic and manual methods). Stop and start services, Fix IT, restores... etc etc. You name it I tried it. I knew that these drivers were on the original Windows installation, so I decided to bite the bullet and do a complete Tassel and take all the patches from its state of origin (desperate that Yes). OK so I took screen prints of my information on the product and information system before you start... I started to follow the XP Reinstall instructions by the support site for windows... and everything seemed to be going great until I arrived at the main screen of the product. I put in my 25 char key and got the pop up "the product Id you entered is not valid. The CD I have, was not a copy retail it was a copy of illigit. However, I bought a license real profit to perform this legal copy... then this could explain why its causing me problems? Otherwise why the * it will not accept my key bought. I checked then double I indexed in as it was printed... and I am really frustrated. Ive gone 1 speaker works do not, no noise, no computer/XP... I tried the Chat Support and they confirmed my product key is still valid... and is the version correct etc etc. But thensaid I need to call a number paying to discuss further. I realize XP is under extended warranty... They want to pay my 46 + VAT + extras before they will even speak with me... at all. So what now? Product ID is 7558881-76487-084-22948 Microsoft Windows XP Professional... updated originally to NT/2000. The sticker on the unit refers to the earlier version HELPPPPP!

  Hello

  I suggest you to return the item and check if it helps:

  Support for the Microsoft Product Activation issues

  http://support.Microsoft.com/GP/cu_sc_prodact_master

  Resolve activation problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

  The article also applies to Windows XP operating system.

• After replacing my hard drive, Windows Vista does not accept my product key.

  product key for Windows Vista

  I recently had my hard drive replaced, windows asks now windows vista activation key product but will not accept the key on the label? Ive tried everything but can't accept and follow my last day.

  The product Id in the registry is not that of a my label and the pc will not accept either

  The laptop came pre installed with vista home premium,

  What happens when my time expires and how can they only activate?

  Sidwright,

  I don't advise borrowing software is not legal.

  http://www.Microsoft.com/piracy/MPA.aspx

  Try this instead and explain your situation to a live person.

  1 / click on the Start button.

  2 / in the Search box type: slui.exe 4 and press enter.

  3 / in the find window available for activation phone number, select the nearest location where you lie in the location box. You can click the arrow to the right of the location box to expand your choice of venues.

  4 / once you have selected your location, click Next.

  5 / If the user account control box, click continue or, if you are not the administrator, type in the username and password for permission to continue.

  6 / the window Activate Windows now will appear indicating the phone number you are dealing with a series of installation identification numbers.

  7 / now compose the activation number is displayed on the screen. The phone number is free of charge (telephone), unless otherwise stated.

  8 / you understand that, initially, the line of Activation is Automatic, so you will be asked to enter the numbers displayed on your screen using your telephone keypad.

  9 / once the numbers entered via the keypad of your phone, the automated service will issue you with another set of numbers that you Type in the dialog box that is displayed on your computer screen.

  10 / now you must follow the instructions issued by the automated service to activate your copy.

  11 / if, after going through this process, the activation service informs you that the product cannot be activated and then DO NOT slam the phone down in rage. Rather STAY ON THE LINE and your call will be transferred to an Activation of the device, in other words, someone real who will help you to activate your copy of Windows Vista.

  12 / I am aware that these steps can be a pain, but nine times out of ten, Activation is automatic and can be accomplished quite easily on the internet. This is the reason why the service is automated. It is true that sometimes the automatism cannot stop, and when this happens, you are put through to someone who can help you.

  http://vistasupport.MVPs.org/product_key_already_in_use.htm

• Windows Vista does not accept my 25 character product key. I said that I have to activate my copy of Windows today.

  How to activate windows vista family premium 32-bit when my 25 character product key isn't accepted I tried for a week to get help I downloaded ie8, because there has been no help offered there at - it a download to fix this? I also need a mass storage controller. activation is most pressing

  original title: my 25 character product key is not accepted so I can't activate vista 32-bit I said, it must be activated today

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Windows Activation by clicking the Start button, right-click computer, clicking Properties, and then clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Why my product key for windows 7 is not accepted

  I BOUGHT WINDOWS 7 A 32-BIT DISK A SECOND DISK 64-BIT 32-BIT HAS BEEN ACCEPTED BUT THE 64 BIT ON A SECOND COMPUTER WILL NOT ACCEPT THE PRODUCT KEY CAN HELP ANYONE!

  You can have 2 DVD (s) one for 32-bit and one for 64 bit version, but the product key is good for installation «One» Once you have installed and activated the 32-bit version, that the key cannot be used to activate a different installation of Windows.  A key = a single computer.

  If you want to use the 64-bit version and to give up using the 32-bit version, you can uninstall Windows 32-bit computer, install the 64-bit and then activate by phone.

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  J W Stuart: http://www.pagestart.com

• My installation of Windows 7 is not accept my product key

  Hello!

  I recently did a full clean and fresh install Windows 7 on my computer, but Activation Wizard is not accept my product key. I bought my copy a few years ago and I had no problem before, it is only now that I have a problem.

  Any help would be greatly appreciated!

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us