Windows 7; Laptop computer DV7; I feel school drop-outs and odd noises

Similar Questions

• Impossible to attach Windows 10 laptop computer to the Internet via cable USB iPhone 5 c after update to iTunes and iPhone (March 2016)

  System information:

  Tactile Lenovo Y50-70

  Construction of 10.0.10586 of Windows 10-10586

  iPhone 5 c - iOS 9.2.1

  iTunes - 12.3.2.35 / 64-bit

  Cell carrier: Etisalat AF

  Last year in Afghanistan, I have used my iPhone 5 c to attach my laptop to the internet simply by connecting via USB.  It has always worked.  Was very simple.  When I returned to the States for R & R in November 2015, I've updated my iPhone and iTunes to the latest versions and upgrades Windows 8.1 to Windows 10.

  I am now back in Afghanistan and USB tethering no longer works.  WiFi tethering works half the time.  The other half of the time, when I try and connect to the network of the iPhone, it is said, you cannot connect to this network.  When I can't connect to the phone, I disable the personal hotspot, WiFi and Bluetooth on the phone and then I turn it back on.  I also turn off my WiFi adapter on my laptop and turn it back on.  Which usually solves the problem and then I can connect via WiFi.

  Do some research on the internet, I read that there was a file corrupted when the current generation of iTunes, but Apple had set and you just need to reinstall the current version, which I did.  I have reinstalled iTunes by suggestions from different site.  After reinstalling iTunes and restart, I can always have my phone to connect to internet via the USB cable.

  I want to be able to connect my laptop to the internet using my phone via the USB cable.  I want it all works just as it did previously.  Connection via WiFi is a pain in the ass, because it does not work half the time and disconnects on a regular basis.

  Please tell us what should I do to solve this problem.

  Thank you.

  OK, I finally understand how to solve this problem.

  I was able to understand because of this post:

  https://discussions.Apple.com/message/29267225#29267225

  The problem is that Windows 10 was not install appropriate drivers for my iPhone.

  You can see 2 places to see.  We're in the control panel.  After you plug in your iPhone, the iPhone will be displayed and highlighted as not having is not a compatible driver.  The other place is in "Devices and printers", there you will see 3 apple devices: 1 Apple Mobile Device USB Driver, iPhone 2, and 3. Apple iPhone.  All three appear when I plugged in my iPhone.

  However, the problem was one that said iPhone really should have said "Apple Mobile Device Ethernet".

  So, how to fix this?

  Open devices and printers-> right click Iphone which should be under "Unscpecified"-> properties-> hardware-> Propterties tab-> change settings-> tab driver-> update driver-> Browse my computer for software Local-> Browse to the directory "C:\Program Files\Common Apple Mobile Device Support".

  Make sure you have the files box to include under verified.

  Who did.  Windows successfully installed the necessary drivers.  Now, I can easily connect to the internet via the USB cable again without any problems.

• I have a desktop Dell Windows 7, a Windows XP laptop computer and a range of printers HP 3050 has, but I can't get the laptop to Windows XP to print wireless.

  I have a new computer (Windows 7) Dell, a new printer (HP 3050 has) and a laptop with Windows XP.  I can't get my laptop to print.  I installed the software.  Help

  original title: Networking

  You use the HP 3050 has as a wireless printer, or have you connected it to the Windows 7 computer via USB?

  You have a wireless router?  What brand and model?

  Assuming the printer is wireless, what happened when you put the CD in the Windows XP laptop?  Although these printers can be installed manually, it is much easier to let the installer of HP to do.  This is page 3 of the "reference Guide" (emphasis added):

  You can share the printer HP Deskjet with other computers which are also connected to your home network. If the HP Deskjet is already connected to your network home and installed on a computer on the network, for each additional computer you install the HP Deskjet software. During the installation of the software, the software will automatically detect the HP Deskjet printer on the network. Because the HP Deskjet is already connected to your network, there is no need to configure it again when you install the HP Deskjet software on other computers.

  Please describe all the steps you have taken and the symptoms you have.  If you receive error messages, enter them completely, without paraphrasing.

• By mistake I disabled all user accounts and cannot connect to my dell latitude d610 laptop computer. Tried going into the bios and turning off everything, what does not work!

  By mistake I disabled all my user accounts and cannot connect to my laptop, the Dell Latitude d610. I tried to restart in all modes as well as rotating directors passwords and disable in the bios. Nothing works!

  Hi kathleenvickers,

  1. How you have disabled all the user accounts on the computer?
  2. What do you find in the login screen when you restart the computer?

  See the articles below and check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• my laptop computer says internet Explorer has stoped working and reopen again and I can not close the program

  product name: hp pavilion g7-1167dx Notebook PC

  Windows 7

  Hello

  You can try resetting Internet Explorer as follows: be aware that this will remove bookmarks and saved passwords etc

  Open windows control panel, open Internet Options, click the Advanced tab, and then click the reset button.  Click 'Yes' or 'Ok' for all additional guests needed to complete the process.

  Kind regards

  DP - K

• Windows 7 updates. Important updates options are grayed out and unable to change

  I am running Home Premium Windows 7 and in Windows Updates settings, I chose "check updates but let me choose whether to download and install them". This worked well until about two months ago, when I stopped to alert me to fresh updates of messages. Now, I find the options in "Change settings" under "Major updates" are greyed out and I can't change them.

  Any advice would be appreciated. Would prefer to have the same option, I'd settle for automatic installation.

  Thanks in advance.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• Recovery disk failure after replacing hard drive of a laptop computer DV7 series

  I have a HP Pavilion dv7-4270us with Windows 7 64 bit and recently received a message on start-up indicating that the intelligent of my hard drive failed. I bought a hybrid Momentus XT drive. I bought the recovery discs, since I neglected to follow my own advice and did not have a game. Replaced the hard drive, and begun the process of recovery, after the disc of the Application, the system was declared finished, clicks the button, the system shuts down. Activated power, recovery took over for a few minutes, declaring that he was copying files, a few minutes later, he said it was over asking me to click done. After that I did it, the system has rebooted hung on the screen of the HP logo with the statement in the lower left corner indicating "press ESC for the Start Menu. My only recourse was to power down the machine. When I restart the computer, I get the message 'Bootmgr' missing

  I have already paid through the forums and tried to download the Windows 7 Home Premium 64 bit DVD of digital life. As it starts installing, it indicates that a driver is missing, I poured by drivers for this computer and see nothing for SATA, and none of the others would be required to start. I succeeded in my Windows 7 Professional on the loading system, but since I don't have an extra code to hang out professional, it's not helping right now.

  I also tried to partition the new disk manually using a device that allows me to see the drive using a USB port and my office, but he's not right. The good news is that the old drive still works to a point. I can read it via USB, and I can back up the drive, with the exception of the recovery partition. But when I put the new disk and set up similar scores for the original drive, it still does not start.

  I have tried many other things all pronounce the failure, I'm not used to failure when it comes to computers, so be gentle.

  Hello:

  The missing pilot is due either to a bad burn or use another brand of DVD. You must burn the ISO at the slowest speed possible file that you can.

  In addition, check the size of the ISO file that you downloaded. Sometimes you do not get the full 3. XX GB even if the download says completed.

  If you have 4 GB or more large USB flash drive, you can install W7 as it.

  Just follow these instructions...

  Download the MS of W7 USB installation tool and read the instructions on the page to use.

  http://www.microsoftstore.com/store/msstore/HTML/p bPage.Help_Win7_usbdvd_dwnTool

  You may also make this mod as I did if the flash tool-error.

  Download the bootsect file form http://www.everettsporting.com/bootsect.zip

  You will need to go into Control Panel, select display large icons, go to the icon of folder options, view tab, and select the hidden files and folders option.

  Once downloaded, copy the BootSect.exe file in the same folder that contains the file of Windows7-USB-DVD-Download - Tool.exe installed. This file in Windows 7's default installation directory is C:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\
  
  Run the application from the Windows 7 USB/DVD download tool as described on the Microsoft Store website. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

  Paul

• upgrade laptop computer DV7 AMD cpu of two to four hearts

  I have a HP DV7 4xxxus (I forgot the exact model number is not at home) with a Dual AMD Phenom II N620 processor 2.80 GHz and was thinking about upgrading to a processor 2.20 GHz AMD Phenom II Quad N970. I've read enough up to this point to ensure that it is possible, but what other factors should I be aware of? I know that this model had a tendency to overheat, but I personally have never had my overheating at the stop. I keep the back elevated to get more air and took part more than once to clean the fan and replace the thermal compound (Arctic Silver) without incident. I use my machine mainly for the compilation of the Android ROM, so believe me when I say that this machine were put to the test the way the most extreme I can think of (the two hearts run at near 100% for hours at a time). I build these Roma back to back sometimes, and my laptop turns on for a period of days. I know it's clearer at the fair and buy new, but this machine gave me good years of use, and if I could find a good deal on a processor, I'd be willing to give it a try. Both processors have the same characteristics (2.0 MB of L2 cache, bus front end to 1 333 MHz, 35W 3.6 gigatransfers per second), so I don't foresee any problems on that front, but what the BIOS? It will need to be updated? Where can I find a viable for this new processor bios update? Can I upgrade the GPU as well? There are other concerns that I think not? Any help would be appreciated...

  Here's the appropriate Manual:

  Manual

  The N970 is supported. You don't need to update the BIOS or something. The motherboard is configured to use this processor. It is generally advisable to reload the operating system after an upgrade of major processor that Windows can have parameters of system based on the original processor and you can lose some of the benefits of the upgrade if you do load a new OS, but apart from that there is nothing really to do.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Windows XP - laptop computer purchase on eBay and o/s has no validation

  I'm helping a friend and now I need help.  The friend bought a laptop Compaq from eBay.

  Installation of a USB adapter in the computer wireless laptop and decided also do updates of Microsoft security and introduce an anti-virus because it was not one.  Updates went to the validation of the software, and it failed.  There is a product key of MS on the bottom that is easily readable.  The windows xp update product key failed.

  I then noticed that the key is for XP Home Edition.  The laptop had XP Pro installed.  I have a dusty copy of XP Home Edition (I'm only Win 7) a PC long gone.  Can I use it and the key on the bottom of the laptop?   My copy has a product key on the box.  Really looking forward to the re - install, but this is the case.

  Digital River has a copy of XP Home Edition I can get?

  The laptop does not even Vista specifications.

  Thanks for him and me.

  Darryl

  Do not wonder that he's been blocked - this is a Volume license key, and never was valid for the employees of the Organization of the holder of the licnese in any case.

  The installation of Office is also very likely to be non-genuine - it is a version which I believe was only sold under Volume License.

  You will need to reformat and reinstall, preferably with the manufacturer recovery media.

  If you can not hold a set of media, then the second best option is to reformat and then install using a disc OEM System Builder for XP Home and the wrench of the sticker

  [edit] It may be possible to reinstall using your media available - you won't lose anything by trying - you may need to use the product key update tool after installation to change the key to that on the sticker.

  [/ Edit]

• After the automatic installation of Windows updates, laptop computer stops unexpectedly

  After that I installed the automatic updates my laptop stops unexpectedly. No one knows why this happens?

  Hello

  · The updates have been installed on the computer?

  · What is the service pack installed?

  · You receive an error message or error code when the computer starts?

  You can follow the link below and get the exact error message or error code: Windows XP restarts unexpectedly or restarts when you shut down the computer: http://support.microsoft.com/kb/320299

  For reference: Advanced Troubleshooting for shutdown problems in Windows XP: http://support.microsoft.com/kb/308029

• Cannot start Windows XP laptop computer... Very Urgent

  Hey guys...
  I have a DELL laptop, with pre installed Windows Vista, I want to remove Vista and load Windows XP
  I removed all my data, now when I put the XP CD and restart my computer.
  the installation program started
  When I press on enter to begin Setup, and error comes stating "SETUP CANNOT FIND HARD DISK DRIVE ON YOUR COMPUTER, make sure of COURSE, YOU HAVE the DRIVE HARD CONNECTED AND powered CORRECTLY."

  Please help me its very urgent

  thanx

  Not XP drivers SATA drive controller. You must be on a floppy disk and a USB floppy drive connected. Press F6 in the first part of the installation routine. Or integrate the drivers into your XP installation CD.

  Integrate the RAID or SATA controller drivers:
  http://www.MaximumPC.com/2005/01/how_to_slipstre.html
  http://unattended.MSFN.org/unattended.XP/view/Web/36/SESSID=8b0c51fd6eca712e465d2e6f79256fc8/

  IMPORTANT: If you have not already went him to the Dell Web site and checked to make sure they have XP drivers for this laptop, you should do this. If Dell can't stand Vista on this machine, you will not be able to install XP. MS - MVP - Elephant Boy computers - don't panic!

• I can't get Skydrive to load my documents via Windows XP laptop computer.

  I bought a smartphone with Windows Mobile 7 HTC7. I tried to save my SkyDrive documents via my laptop Windows XP (service pack 3). I can't do any feedback between my cell, a Note of Office, Skydrive, and there is nothing to synchronize, or downloads and I am already upset by all this. There is little or no information out there for this cell phone and your software. I called HTC and nobody could give me an answer, I called and talked to T-Mobile (since its my carrier) and no answers either. You are my last hope before I change my mind on the choice of the cell phone. Its a nice phone, yet his worthless as an office tool. Please send me some instructions on Windows Mobile 7, Skydrive and Office OneNote.

  SkyDrive is a product of Windows LIve. They have a forum for Windows LIve products.
  Click on the link below to ask your question in the appropriate forum for Skydrive.
  http://windowslivehelp.com/product.aspx?ProductID=6

  Sincerely,

  Marilyn

• Resolution of screen of Windows 7 laptop computer rose after updates. Cannot read the menus.

  My laptop has a new installation of Windows 7 SP1 Pro who had before correct screen resolution updates have been installed. Today, I managed to install all updates after fighting with a lot of problems with outdated update Agents. Now, the resolution of the screen has increased so that text and on the desktop, the menus are invisible. Among the updates could be for the video driver. Now, I can't use the settings menu or control panel to change the resolution, because the menus show only as tiny arrows. Even the Start Menu does not appear. The command prompt window is normal text, so I can use it for the closing session and stop.

  Is there a curse from command line to get the desktop settings? I tried the "Windows"I"suggestion for another post, but it does not bring up the settings menu. And "Control +" does nothing on the desktop.

  Thank you.

  MS has probably included a video driver in the list of the optional updates for your system of brand not specified and the model.

  You should look at those carefully and decline/hide video driver updates.

  Generally, it is not wise to accept updates of hardware driver (audio, video, network), available from MS, and many are the woes of people who (and then have your question).

  If you see offered, it is best to diminish and hide so that you do not see them yet.

  Here you can see where certain nVidia and Western Digital updates have been hidden:

  

  If after completing your 208 updates of the video is messed up again, you should be able to just push this update of the video driver from Device Manager instead of having to run the system restore:

  

  It might help to check the Device Manager when the system works well to see and note that the graphics card version, this is before making updates so that you know what he looks like when he's not working properly.  Then you will know what is the "right" driver version  After the updates (and before rebooting), you can check the driver again and roll back before restarting.

  If you can get only / still at the command prompt (or the run menu), you can open the device like this Manager:

  

• Explorer Windows stopped working in particular a folder in windows 7 laptop computer OS

  Hello

  I have a problem in windows Explorer in windows 7 OS in my laptop in a specific folder. I tried to check the online solution, and then restart the program. but the problem is not resolved. An error message is as shown below:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: Explorer.EXE

  Application version: 6.1.7600.16450

  Application timestamp: 4aebab8d

  Fault Module name: DivXMFSource.dll

  Fault Module Version: 1.0.0.65

  Timestamp of Module error: 4b7f00b4

  Exception code: c0000005

  Exception offset: 0000000000020941

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 2057

  Additional information 1: 5afa

  More information 2: 5afa2ad43cc2eeb798be80d854b75d25

  Information additional 3:9372

  Additional information 4: 93723d2672b628931492a9de5501df54

  Read our privacy statement online:

   

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Please give me the solution for this problem.

  Fault Module name: DivXMFSource.dll

  Hi, the cause of the accident is the DivXMFSource.dll file, which is part of DivX. So update please, or remove it from DivX. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows XP SP3 computer takes a long time to start and stop

  original title: where to get support for Win XPsp3?

  computer takes long to START and CLOSURE and the search can't find anything

  Try to carry out the instructions in the link below firstly to improve the speed and performance of your computer:

  http://www.Microsoft.com/windowsxp/using/Setup/expert/northrup_restoreperf.mspx

  In addition, you can get technical support for Windows XP by using the link below. In the link provided, simply select the appropriate version of Windows XP you are using. You have the ability to chat, e-mail or telephone.

  http://support.Microsoft.com/select/default.aspx?target=assistance&C1=509&

  You can also get in touch with them by calling the 800-936-5700. Their opening hours are from Monday to Friday from 05:00 - 21:00 and Saturday-Sunday 06:00 - 15:00 Pacific time.