8610: 8610 software

Similar Questions

• HP Officejet Pro 8610: Software not download

  My printer connect to my Mac. Then I run the installation and it asks me if I want to install only the essentials or also Easyscan. When I select one or both it hangs on 109 MB and does continue. Is there a way to manually download this software?

  HGi,

  Follow these steps to install the essencial software:

  http://support.HP.com/us-en/document/c04510394

  If you experience any issues mnually install the following package:

  https://support.Apple.com/kb/DL907

  Finally, install the application HP Easy Scan from the link below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Shlomi

• 8610 HP printer all in one: how to scan with very high resolution 1000 dpi?

  I'm scanning pictures very old, very low (about 1 by 1"). On my 8610, the highest resolution I can apparently is 300 dpi. On my 6600 previous, I was able to get 1000 dpi? Is the 8610 really not able to scan at such a high resolution?

  Hello

  The printer supports up to 2 400 ppp, but only from the glass flat, while the automatic Deeder top of Document (CAD) is limited to 300 dpi.

  Open the HP Officejet Pro 8610 software and tap on scan a Document or Photo.

  Change the source of the default 'ADF' value to 'flat glass', then analysis higher resolutions will become accessible to the general public within the drop-down list resolution .

  Kind regards

  Shlomi

• HP 8610: Printer scans only through the tray and not the ADF

  I recently bought a HP 8610 and installed Windows 7. Printer scans only through the plateau. Originals loaded in the ADF (there is a sound that confirms this), but the default scan is flat. Infact the options of the status bar in the configuration of the printer displays only Tray 1. Help, please.

  Hello

  The HP Officejet Pro 8610 software click on scan a document or Photo.

  Ensure that all source scan as use charger (if installed) documents and not as the glass flat.

  If that doesn't help, can make you a copy of the feeder by selecting copy > start copying in black from the rpinter Panel?

• OfficeJet Pro 8610: Easy transfer Fax speed dial list between 2 printers?

  I just bought the 8610 pro and I want to know if there is an easy way to move the dial list fast fax during the bonus of 8600 with ease? As opposed to delayed manually each character on this small touch screen of the printer!

  Hello

  CERES a printer speed dial can move to another. but you can click on manage fax from the HP Officejet 8610 software settings, and then select the speed dial tab.

  From this screen, you can add new Ceres using your PC speed dial.

  If you still have your old printer you can locate the existing entry as its software.

  Shlomi

• Office Jet 8610 all-in-one: fax does not install

  Can someone help me please?   I have printer uninstalled somehow the 'fax' when I was on the move. I set the printer to the top, even re downloaded the driver for Mac Os X. I "added" a new printer, but it still does not show the 'fax' option when I hit 'print' as before. And the 'fax' does not appear in my list of printers.  I could use some help.  Thank you in advance. Gigi

  Hello @GGSA!

  Thanks for posting on the HP Forums!

  I would be happy to provide you with some suggestions that can help solve the problem!  There may be a slight problem with the software.  I know that you have reinstalled the drivers, but I suggest you uninstall the HP software. Once the software uninstalled I recommended to perform a "repair disk permissions" on your Mac. A repair disk permissions is a utility built into the operating system Mac designed to detect and resolve problems or errors. After that permission to repair disc is finished, reboot your Mac computer and re-install the software.

  To uninstall the software HP click here: uninstall the HP software

  To perform a repair authorization disk click here: repair disk permissions

  To download the HP software, click here: Officejet 8610 software and driver

  After the installation I recommend that you check the software updates on the Mac. To search for software updates, click the icon "Apple" to the left and click on the "app store". In the app store, you can click on the "updates" at the top of the window. Updates install and Hp or a printer. After the update, you must restart the computer.

  If please, after back and let me know if this worked for you!

• HP Officejet Pro 8610: Try to install the full software concludes printer, but the IP address is the address of the router, not the printer

  I tried several times to remove printer, uninstall the drivers, reboot, reset the printer to the factory, etc. without success.  I even went into the registry and deleted the printer reference as much as I could.

  Please note I know how to connect the wireless printer and did successfully to the router with IP 192.168.1.108.   The problem is that the installer will search for a printer on the network and detects the 8610, but it appears with the IP address 192.168.1.1, which, of course, fails to install correctly.

  How can I get the dialog box to see the printer with the CORRECT IP ADDRESS?

  Well, I gave up trying to connect wireless and connected the printer with an ethernet cable.    Re-installed software that went much smoother, but still showed printer with IP router when you try to add it.   I chose "other devices" and is manually entered IP ethernet.

  Everything works now, including scanning.

  I think that the new router (for satellite internet) blocking a port that is required to complete the driver installation.   I had to add a switch to have an additional ethernet port to connect the printer.

  It was NOT a good experience.   I had a lot of practice of deleting, downloading, installation, configuration of the HP printer again and again well, therefore perhaps not all a lost cause.

• OfficeJet Pro 8610: Officejet Pro 8610 wireless printer is constantly busy and does not update the software drivers.

  I'm trying to update my printer via the steps outlined on the HP website. However, when identify my printer and try to install the revised version of the software of my printer continually says its busy. This means that the printer will not update.

  When I first tried this software update the status of the printer was ready however after failing at the start of this first attempt each following update failed because the printer is busy. I turned he walks several times and even turned off then the option automatic updates with no luck.

  Without being able to change that status, I can't update the printer. I know that it is able to connect to the network, because it checks and tells me that he has the latest software version available fo, so I am very confused as to how I can fix this.

  Any suggestions?

  Hey @Branthwaite, welcome to the Forums of HP! I'd love to help you update your JO 8610.

  From your description, I understand that you cannot refresh the printer as it is stuck in the free/busy information.

  We will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in. Also, even if you have used a surge protector/power bar this whole time and you feel this isn't the cause, please plug it in to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  * In this document, you will see, QUESTION: questions or problems may occur when a printer HP LaserJet series printer is connected to a UPS (UPS), a power strip or a surge protector that is not limited to the Laserjet printers.

  I can't wait to hear back on your part. If performing a hard reset, or move the printer to a socket solves the problem, please click Accept as Solution button below so that the community can see your problem is solved. If the problem persists, please don't forget to leave me and I'll do everything I can to help.

• HP OfficeJet pro 8610: new software update for HP OfficeJet pro 8610

  Dear HP guys!

  I'm officially confirm that I used compatible cartridges for my MFS and don't need no guarantee for this. Please just return old version of the software for my device so that I can use it. I bought this unit for my private needs and according to the Russian law, I am free in what to use with it.

  p.s. I always buy Komus - your recommended non compatible cartridges.

  Future prospects for the quick response.

  Hi Donal_M

  My 8610 rose like a Phoenix from the ashes)))

  Click on the link below (PS any updates from HP)

  https://www.brozkeff.NET/2016/09/01/how-to-downgrade-firmware-on-HP-OfficeJet-Pro-8610-to-allow-using-old-or-refilled-cartridges/

  ... the truth is always on the side of cheating on her...

• OfficeJet Pro scan 8610: 8610 computer software not found

  Hi - I have a fairly new Officejet Pro 8610 and it uses a wireless network with a MacBook Pro. Wireless printing function works perfectly; and, as a first step, the it function analysis did too. Without apparent reason, has now ceased to work, and every time I try to activate using the HP app, I get an error message indicating that the required software/driver is not found on the computer. However, I re-downloaded and installed the driver full value several times on the site of HP (no effect). The computer always communicate perfectly with the printer, and I'm able to activate the scan through the Mac system preferences function.

  Any help gratefully received...

  Hey @pleigh20,

  Welcome to the HP forums!

  I see that you have problems with your Officejet Pro 8610 scanning your Mac 10.9. I can help you with that.

  Given that you have a problem scanning I want to make sure that the printer is plugged directly into a wall outlet and not a surge protector. Once this is done, we will do everything that follows.

  1. On your Mac, go to Applications.
  2. Open your Hewlett-Packard folder.
  3. Run Uninstall HP if it is present.
  4. Go to Applications and utilities.
  5. Open disk utility.
  6. Click "Macintosh HD" on the left.
  7. Click on verify disk permissions. It will take about ten minutes.
  8. Click on repair disk permissions. It will take about ten minutes.
  9. Restart your Mac.
  10. Go to your Apple icon and the software updates. Download the updates that are found.
  11. Download and run the HP Installer (if you need the link you can click here).
  12. Try scanning.

  I would like to know if it works for you. If it's not please let me know what happened and I will be able to help you further. Even if it solves all please let know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a great weekend!

• OfficeJet Pro 8610: Install the HP software

  Hello!

  I have a HP Officejet Pro 8600 and a HP Officejet Pro 8610; When connected to my wireless router.

  I have a new laptop Lenovo with 10 windows and I want to know if I need to install two (8600 and 8610) Officejet software under Windows (to print and scan) or if the installation of the will (most recent) software only Officejet 8610 let me print and scan on both devices (8600 and 8610)? I also use the "scan-to-network-folder" on both devices.

  Thank you.

  Hello

  You need to install the software and drivers for both and you can select the default (primary) and the other as secondary.

  Kind regards.

• OfficeJet Pro 8610: problem to define the officejet pro 8610 mac software

  Hi, I have a problem to set up the software with easy start. For my desktop computer (Imac), it worked very well, but for my laptop (mac), it is stuck at 93.3% when downloading the necessary software... If you explain that it will be welcome. Thank you.

  Hello @Ahlmy, greetings!

  Thanks to their participation in Forums of HP! I see by your post that you encounter the problem to set up the printer on your laptop MAC 10.11. I will definitely do my best to help you.

  Please, try the steps mentioned below and check:

  • Click on the Apple menu icon and then click on System Preferences.
  • Click on printers and Scanners, print, Scan, or print and Fax.
  • Click the Add (+) button.
  • Search, then select the name of your printer in the Printers list, and then click Add to add your printer.
  • Click on print to help... and then select the name of your printer (default "Airprint" would be selected)
  • Now try printing.

  These measures should be the case, I would like to know the results

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• OfficeJet Pro 8610: Can device driver software corrupt

  At least once a week the software of the printer device driver is damaged. When you run thr troubleshooting indicates that the printer is not enabled (although it is) and the shooting hurt program then reports that there is a problem with the software device driver that requires me to uninstall the software and then reinstall it.

  It works for about a week and then the rpoblem begins again.

  Hi dklawitter,

  No problem, I am happy that the problem is resolved for now. Let me know if something happens.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Best regards!

• Hp Officejetpro 8610: oj8610_198 drivers install only basic software win 10 x 64

  Hi, after a crash of windows store the software compared to rhe mentioned printer disappeared.

  I tried to reinstall the package more complete, but he only install the basic software.

  He has not yet requested software complementary which I want to install.

  You have a solution?

  Hello

  Try this for scanning.

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.

  Thank you.

• OfficeJet Pro 8600 Plus: problem of scanning the computer

  I have a HP Officejet Pro 8600. It is configured for a wireless connection.  All the features work, i.e. copying, printing out of internet/office, Fax, with the exception of scanning.  The printer is displayed the "OS is not taken in charge for this feature.  He has never done this before.  I was always able to scan to my computer before. My OS is Windows 7, 601.64.  I tried to reinstall the HP with the provided CD, but which does not allow me to run that is.

  Any suggestions before I have throw out the window?

  Hello

  Can scan you from the HP Officejet Pro series 8610 software by clicking Scan a Document or Photo?

  If not, try after HP print and the doctor Scan by selecting the difficulty of analysis:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E013-1&h_keyword=DG-NDU

  What are the results reported?