Windows 7 Local - error during Reconfiguration Converstion
I've been through the Google results for this question but that you have not found the magic bullet yet, so I figure it's time to let someone with experience look at my logs.
I have a pair of new laptops (Asus N53SN-SV1 - quad core i5 improved to 8 MB of RAM, Win 7 Home Premium). The goal is to install Ubuntu desktop on them Windows under Vmware Workstation 7.0. I use a converter standalone 4.3 installed on the machines being converted. Each attempt has so far resuled "FAILED: could not find the system volume, reconfiguration is not possible."
The disks are partitioned with OEM, System C: drive recovery partition and a vacuum for the most part D: partition. I told you the converter to convert only C:, which is marked as active and boot partition. There is no current mirroring I can say of the window settings. I tried to adjust the disk controller to IDE instead of the default "preserve the source." Win 7 don't use Boot.ini. Conversion for workstation necicitates that the number of processors virtual capped at 2 and the machine virtual RAM has been set at 2 GB. For fun, I tried to start the virtual machine that the converter created under my computer: Windows starts at startup then bluescreens, then on the next attempt complains that the Starter is broken (and cannot be repaired). Try to repair from the Windows CD that we will fail. Safe mode no longer works.
If I missed something, ask here.
Start the virtual machine in your Windows 7 recovery CD.
See http://sanbarrow.com/p2v2008r2.html
Make sure that you assign the drive LSI - SAS - IDE does not
Tags: VMware
Similar Questions
-
Error during reconfiguration (at 96%)
Hello
I'm trying to convert a physical Windows 2008 std server in a virtual machine, using the vCenter Standalone Converter, but I always get an error to 96% of the conversion process. The error that I see on the "Log highliths" part of the window that says "error: an error during reconfiguration.» ".
I exported the newspapers from the last test, which I am placing below:
2013 09-18 T 20: 54:47.968 + 03:00 [info 02448 'Default'] [user, 890] successfully authenticated the user administrator
2013-09-03:00 [error 03600 "Default"] Found dangling SSL error + T 18, 20: 54:48.390: error:00000001:lib (0): func (0): reason (1) [0]
2013 09-18 T 20: 57:55.248 + 03:00 [info 02160 "Default"] connection to host on port 443 10.2.8.2
2013 09-18 T 20: 57:55.248 + 03:00 [info 02160 "Default"] at localVersion is: vim.version.version7
2013 09-18 T 20: 57:55.279 + 03:00 [info 02160 "Default"] remote version is: vim.version.version7
2013 09-18 T 20: 57:55.295 + 03:00 [info 02160 "Default"] root user authentication
2013 09-18 T 20: 57:55.357 + 03:00 [info 02160 "Default"] ComputeResource for vim. HostSystem: ha-host is vim.ComputeResource:ha - computer-res
2013 09-18 T 20: 57:55.357 + 03:00 [info 02160 "Default"] ResourcePool to vim.ComputeResource:ha - computer-res is vim. ResourcePool: ha-root-pool
2013 09-18 T 20: 57:55.373 + 03:00 [info 02160 "Default"] ComputeResource for vim. ResourcePool: ha-root-pool is vim.ComputeResource:ha - computer-res
2013 09-18 T 20: 57:55.373 + 03:00 [info 02160 'Default'] data center for vim.ComputeResource:ha - computer-res is vim. Datacenter: ha-datacenter
2013 09-18 T 20: 57:55.373 + 03:00 [info 02160 "Default"] vim VM root folder. Datacenter: ha-datacenter is vim. File: vm-folder-ha
2013 09-18 T 20: 57:55.373 + 03:00 [info 02160 "Default"] reuse existing connection of VIM to 10.2.8.2
2013 09-18 T 20: 57:55.373 + 03:00 [info 02160 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
2013 09-18 T 20: 57:55.389 + 03:00 [info 02160 ' vmomi.soapStub [6]'] adapter reset for Server TCP:10.2.8.2:443 heel: closed
2013 09-18 T 20: 57:55.389 + 03:00 [info 02160 "Default"] connection to host on port 443 10.2.8.2
2013 09-18 T 20: 57:55.389 + 03:00 [info 02160 "Default"] at localVersion is: vim.version.version7
2013 09-18 T 20: 57:55.420 + 03:00 [info 02160 "Default"] remote version is: vim.version.version7
2013 09-18 T 20: 57:55.436 + 03:00 [info 02160 "Default"] root user authentication
2013 09-18 T 20: 57:55.498 + 03:00 [info 02160 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
2013 09-18 T 20: 57:55.514 + 03:00 [info 02160 "Default"] ComputeResource for vim. ResourcePool: ha-root-pool is vim.ComputeResource:ha - computer-res
2013 09-18 T 20: 57:55.639 + 03:00 [info 02160 ' vmomi.soapStub [7]'] adapter reset for Server TCP:10.2.8.2:443 heel: closed
2013 09-18 T 20: 57:55.639 + 03:00 [info 02160 "Default"] created a new element of planner with id = '2', firstTimeToRun = '20:57:55.389 2013-09-18', source = ' ', targetRPOInMinutes = '0 '. -__thiscall Converter::Server:Scheduler:SchedulerItemImpl: ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/schedulerItemImpl.cpp:87")
2013 09-18 T 20: 57:55.639 + 03:00 [info 02160 'Default'] point planner with id = '2' created - __thiscall int Converter::Server:Scheduler: ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/priorityQScheduler.cpp:49")
2013 09-18 T 20: 57:55.639 + 03:00 [info 02360 "Default"] Scheduler scheduling pos.2 executing time = 20:57:55.639 2013-09-18. -Sub __thiscall Converter::Server:Scheduler:SimpleScheduler:Run (void) ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/simpleScheduler.cpp:109")
2013 09-18 T 20: 57:55.920 + 03:00 [info 02372 "Default"] connection to host on port 443 10.2.8.2
2013 09-18 T 20: 57:55.920 + 03:00 [info 02372 "Default"] at localVersion is: vim.version.version7
2013 09-18 T 20: 57:55.951 + 03:00 [info 02372 "Default"] remote version is: vim.version.version7
2013 09-18 T 20: 57:55.967 + 03:00 [info 02372 "Default"] root user authentication
2013 09-18 T 20: 57:56.029 + 03:00 [info 02372 "Default"] ComputeResource for vim. HostSystem: ha-host is vim.ComputeResource:ha - computer-res
2013 09-18 T 20: 57:56.045 + 03:00 [info 02372 "Default"] ResourcePool to vim.ComputeResource:ha - computer-res is vim. ResourcePool: ha-root-pool
2013 09-18 T 20: 57:56.045 + 03:00 [info 02372 "Default"] ComputeResource for vim. ResourcePool: ha-root-pool is vim.ComputeResource:ha - computer-res
2013 09-18 T 20: 57:56.045 + 03:00 [info 02372 'Default'] data center for vim.ComputeResource:ha - computer-res is vim. Datacenter: ha-datacenter
2013 09-18 T 20: 57:56.045 + 03:00 [info 02372 "Default"] vim VM root folder. Datacenter: ha-datacenter is vim. File: vm-folder-ha
2013 09-18 T 20: 57:56.045 + 03:00 [info 02372 "Default"] reuse existing connection of VIM to 10.2.8.2
2013 09-18 T 20: 57:56.123 + 03:00 [info 02372 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
2013 09-18 T 20: 57:56.139 + 03:00 [info 02372 ' vmomi.soapStub [8]'] adapter reset for Server TCP:10.2.8.2:443 heel: closed
2013 09-18 T 20: 57:56.639 + 03:00 [info 02372 "Default"] Started task 'task-25' for job = ' job-25 ", item '2' = - __thiscall Sub Converter::Server:Job:JobProcessorImpl:StartProcessingJobs (void) ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:383").
2013 09-18 T 20: 57:56.686 + 03:00 [01184 info "Default"] ConverterConnection: KeepAlive timer cancelled, StopKeepAlive succeeded
2013 09-18 T 20: 57:56.701 + 03:00 [info 01184 ' vmomi.soapStub [5]'] adapter reset for server PIPE:\\.\pipe\vmware-converter-worker-soap heel: closed
2013 09-18 T 20: 57:56.732 + 03:00 [info 03928 'Default'] [task, 338] [task-25] - BEGIN - convert
2013-09-03:00 [03928 error "Default"] Found dangling SSL error + T 18, 20: 57:56.779: error:00000001:lib (0): func (0): reason (1) [0]
2013 09-18 T 20: 57:56.920 + 03:00 [info 03928 'Default'] [taskSpec, 467] task [25] [TaskMap] - 25:task - 2
2013 09-19 T 00: 25:57.006 + 03:00 [03928 error 'Default'] [task, 350] [LRO] Unexpected Exception: converter.fault.ReconfigurationNoSystemVolumeFault
2013 09-19 T 00: 25:57.006 + 03:00 [info 03928 'Default'] [task, 379] [task-25] - ERROR - convert: converter.fault.ReconfigurationNoSystemVolumeFault
-> (converter.fault.ReconfigurationNoSystemVolumeFault) {}
-> dynamicType = < unset >
-> faultCause = (vmodl. NULL in MethodFault),
-> description = "InternalError"
-> msg = ""
->}
2013 09-19 T 00: 25:57.006 + 03:00 [info 03928 'Default'] [diagnosticManager, 267] retrieved taskInfo for ' converter.task.Task:task - 25 ' mapping to "converter.task.Task:task - 25". "
2013 09-19 T 00: 25:57.006 + 03:00 [info 03928 'Default'] [diagnosticManager, 307] the task with id = 'task-25' proved to be a task 'recent '.
2013 09-19 T 00: 25:57.006 + 03:00 [info 03928 'Default'] [diagnosticManager, 321] no existing group of newspaper found to task with id = "task-25" The task is still 'young' so a bundle of newspapers going now is assigned.
2013 09-19 T 00: 25:57.006 + 03:00 [info 03928 'Default'] [diagnosticManager, 790] recovery job related diagnostic for the tasks of server with id = "task-25"
2013 09-19 T 00: 25:57.146 + 03:00 [info 02364 "Default"] passage work 0 'job-25' completed with an error. -struct Converter::Server:Job:JobExecutor:SchedulerUpdateSpec __thiscall Converter::Server:Conversion: ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/conversion/conversionJobExecutorImpl.cpp:405")
2013 09-19 T 00: 25:57.287 + 03:00 [info 02364 "Default"] suspended 1 elements of Planner for employment (job-25) - __thiscall Sub Converter::Server:Job:JobProcessorImpl:SuspendJobAux(const_class_Converter::Server::Job::InternalJob_&,class_Converter::VdbConnection_&) ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:828")
I tried to convert the machine with vSphere Standalond converter from several machines (running just the customer, not the converter itself). I use version 5.0.0 build-470252 of the stand-alone converter and I am trying to host it on a 5.0.0 ESXi hypervisor 469512.
Any help would be really appreciated...
Kind regards
Angelos Pitsos
Hello
It took me almost a week, but the problem is finally solved!
In the meantime, I did several tests which I want to mention in order to help others.
I used a nice backup/cloning tool, called EaseUS ToDo Backup. Who created images of two readers, I have so been able to get back them in the VM to boot with the rescue disk (the CD iso file) EaseUS. Unfortunatelly even that did not help, because I was getting the message "BOOTMGR is missing" at the start of the system.
So I tried to restore these images to the bare metal on a HP DL380 server. It took several hours to complete that, comparing with the previous trial on the virtual environment, but when it finished I got the same problems. BOOTMGR missing.
On these two options, I tried to start with support for Windows Server 2008, but I couldn't "see" the disc. Also, it not there no other options repair that might help. I've tried everything. No luck with the Windows Server CD.
Then I tried to see if I can fix it from the command prompt using the DISKPART command. Unfortunately I could not fix again.
I was thinking about giving up, but I remembered my motto, that said 'Everything is possible', so I started to think about another way. I thought it might be a good idea to try to search for the problem that I see and not what I believe. I mean the problem started because the conversion went well, but the virtual machine was there. It was migrated into the virtual environment at the end, and finally he just was not able to start. Also, I restored "images" of the physical machine, created with another way, but I always got the same message. So it should not be the conversion itself, but something else that was causing the problem with the trunk.
After spending some time searching the web for a solution I found here: BOOTMGR is missing in Windows Server 2008 R2
Start with an image of the DVD Windows 7 x 64 Pro and try to automatically fix problems twice, gave me a c. bootable disk and an operating system of Windows 2008...
I hope that helps someone else who will be the face of similar problems with a migration/conversion which will give after an error "BOOTMGR is missing".
I would also like to thank you all who spent time with my problem and posted about it. I really appreciate it a lot.
Kind regards
Angelos Pitsos
-
Error during reconfiguration win 2008 R2 VM
Hello
I'm done clone of windows 2008 R2 VM, while reconfigureing the VM gives error "7044 P2V [task, 296] error" task failed: P2VError UNABLE_TO_DETERMINE_GUEST_OS() "."
My VC details: VC4 update1, build 208111, Converter version 4.1.1
as I went through the blogs of VMware converter 4.1.1 will not hired widows 2008 r2.
I just want to know if VC 4 Update 2 will upgrade to version converter, and if it will support the windows 2008 r2 version.
Kind regards
Shirish
vCenter Converter 4.2, which came with vCenter 4.1 and 4.3 Standalone converter added support for Windows 2008 R2 and Windows 7 sources. See the release notes:
http://www.VMware.com/support/vSphere4/doc/vsp_vcc_42_rel_notes.html
http://www.VMware.com/support/converter/doc/conv_sa_43_rel_notes.html
Then Yes, you would need yo day vCenter (in a 4.1, not 4.0 U2) or install Converter Standalone on another machine.
-
Windows 7 Upgrade error during installation
During the installation of Windows 7 Home Premium (64-bit), I get this error message "Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070017. In this case at 65% of the files copied. I use the option to upgrade the current operating system Vista Home Premium. Removed external devices and disabled Virus/Malware protection. Any thoughts on this error or a similar discussion that I didn't know. Thank you
Rick
Try to download a backup copy:
For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.
It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.
Given that this option is no longer available, what are your options? See the article for more details:
How to: What are my options for Windows 7 reinstall media?
Make sure you scroll down and read the section:
What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?
-
Media Go Windows Media Runtime error during installation
Windows XP SP3, installed all the prerequisites set out in http://mediago.sony.com/enu/frequently-asked-questions/ the error still appears. Looked around the forum, but there is no solution that worked. This is starting to remind me the nightmare of SonicStage, I had some time ago
Run Windows Update and check if there are updates available for Windows Media Player. That might be easy.
-
Windows 10 has failed 75% error oxc 1900-ox 400 d has failed in the second phase of startup with the error during the operation of the Migrate_data on my windows desktop 7 using media creation tool. Help please.
Turn off the computer.
Wait 10 minutes.
Start the computer.
The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows.
Launch the prompt with administrator privileges.
Press the Windows key + X
Click prompt (Admin)
Type the following command:
Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN
Press enter on your keyboard
Exit command prompt
Restart
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times and try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Do a clean boot, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
- If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
I have a 64 bit Windows 7 PC and cannot install updates. Here are two screenshots.
One contains two error message that I get when trying to update
"WindowsUpdate_80070641" "WindowsUpdate_dt000"
"WindowsUpdate_00000641" "WindowsUpdate_dt000"The second erorr is what I get when you try to start the Windows Installer Service.
Windows cannot start the Windows Installer service on computer local error 216:0xd8
I follow several steps that are listed in the web pages of solving problems. Tried to make own reboots, use the Microsoft Fix and it does not detect any problems. I tried to install Windows Installer 4.5 and I get a message telling me that this update is not applicable to your computer
Please notify
See if this ad helps-
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/213770d0-e94b-43B4-9ff6-99e6366b556b
TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
error code 0x80070005
Upgrade Windows xp to Windows 7 Professional. During installation I got the error code 0 x 80070005. Solution?
How to troubleshoot the error codes Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers
http://support.Microsoft.com/kb/938450Error code 0x80070005
Symptom
When you try to use a KMS host, a KMS client, or a MAK to activate one or more computers, you may receive the following error message:0x80070005
Access denied that the requested action requires elevated privileges.Cause
This problem occurs if the user (UAC) access control does not allow activation of process run in a not high command prompt.
Workaround
To work around this problem, follow these steps:1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as.
2. click on the next user and then select Administrator in the user name list.
3. click on OK.
4. at a command prompt, type the following command and press the "Enter" key: slmgr.vbsJ W Stuart: http://www.pagestart.com
-
Windows dream scene met a fatal error during decoding of the video
my windows dream scene does not work there is a message that says: "windows dreamscene has encountered a fatal error during decoding of the video". My os is windows vista ultimate. I tried to update and installed the feature with enough space but always has encountered an error. What should I do to recover and use the feature?
Hello
Thank you for using the Microsoft Windows Vista Forums.
Follow the instructions below that may help you resolve the issue.
Method 1:
If you have installed on your computer from Roxio, uninstall it and see if the problem is resolved.
Method 2:
If this does not work, let us perform clean boot that could help you solve the issue.
To perform the clean boot procedure, follow the instructions in the link below.
Step 1: Perform a clean boot
Step 2: Enable half the services
Step 3: Determine whether the problem returns
Step 4: Enable half of the startup items
Step 5: Determine whether the problem returnsStep 6: Resolve the problem
Step 7: Reset the computer to start as usual
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
After checking the problem, turn the computer back to the Normal mode.
Uninstall or update the program that is causing the problem.
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
Getting the 80070005 error during the backup with windows vista home premium then closes backup
When I use backup in windows I get errors then backup closes. the errors were 0x800700AA and now 0x80070005. I'm not familiar with what they mean but have tried Fixit without success.
Hi Brian,.
This error code means that the file or folder you want to backup does not have the necessary permissions.
Method 1:
If you need to make a backup of any file or folder, please ensure that give you all the permissions for that particular file or folder.
To set the permissions of files, see the procedure below:
a. right click on the file or folder and then click Properties.
b. click the Security tab.
c. under group or user names, click your name to see the permissions you have.
d. If they don't get permission, click on change and give the full control.
e. then check if you are able to backup.
Method 2: Check if you are able to backup by following these steps:
Try to temporarily disable your anti-virus and malware during execution of the backup. If the backup works fine, then you have to search for updates and firewall settings in the security software.
Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.
Method 3:
Disable UAC during backup control.
Enable or disable the User Account Control
Note: Make sure that you enable user account control and the back of the antivirus on the computer after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.
-
original title: The Audio service is not running windows vista
Hello
I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.
I saw it in Event Viewer
The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.
Thank you
-Majid
original title: The Audio service is not running windows vista
Hello
I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.
I saw it in Event Viewer
The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.
Thank you
-Majid
These error messages are a pain in the neck to extract useful information.
I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.
If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.
Realtek and NVIDIA, for example get stuff good free audio driver.
If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period
-
Fatal error during installation of Windows Live Writer
A few days ago MSN prompted me to update my MSN to the latest version. I did and after the update, I noticed that I could not install Live Writer. I tried many times and I'm still stuck.
I received an error message stating:
"Fatal error during installation. .
Please close all other open programs, and then try again. It looks like a another program prevents the installer to work. HR:0 x 80070643 "
Help, please. Thank you.
Hello twmagee,
Since you have problems with Windows Live Writer, it is best to post in the forums of Windows Live Writer.
Click here for a link to their forum.They have experts and available solutions in their forums.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
in the face of Windows 8 store error 0 error problem x 80240437 during installation of applications
Hello
I am facing problem of Windows 8 store error error 0 x 80240437 during the installation of apps or update applications
Please solve this problem
Thank you
Saurabh
Slim,
I followed the advice of e-mail from Microsoft, and it worked! I wanted to help if possible. Please see the information below:
Go to control PANEL and under SYSTEM & SECURITY go FIND & CORRIGERA PROBLEMS. Here on the right one can click on one or all the rubrics ~ ~ programs/hardware & sounds/network & Internet/System & Security, and each of them find and solve problems. However, I found just pass under security & system and find and fix problems with windows update fixed the problem I had. I hope this helps!
Ginger
-
My computer is a Macbook Pro of 4 core (i7) with the OS X Yosemite system.
The problem: when I try to install Adobe Acrobat (perpetual license) the final stages of the process I get a notice about an error during installation and advise him that I have to contact the software manufacturer.
Anyway I can run the program and it seams to work in many aspects, but a problem, I started to work with her.
Work problem: it's when I try to use the option (under File menu) "save under" it pops up a new window totally in white without box or numeric button. Then I can't do anything with this window, and therefore I can't save it as what it is.
I have a few comments to solve this problem.
I did try to solve this problem, it was to first uninstall and install again. But I don't have the problem with the option "Save as."
Thanks in advance for your support.
IMVB
Hello
For "save under" the number of empty window.
Go to the Acrobat icon on the top left, and then select Preferences
In, click general categories
Uncheck the option 'Show when saving files from storage online'
Click Ok
I would like to know if it works for you.
Thank you
Abhishek
-
during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?
I just had to go to the directory "Win Support files" and open the implementation file. Now it's working.
Maybe you are looking for
-
Moving iPhoto/photo library
Hello I'm moving my iPhoto and photo library to an external hard drive to save space on my MacBook Pro SSD. Once I located in my home folder, then the folder images, both iPhoto and photo libraries are there, and they say they have a capacity of appr
-
HP pavilion g7-2259nr: Hp pavilion g7-2259nr Windows 7
Hello My girlfriend bought this laptop for me that came with Windows 8.I installed Windows 7 Professional 64-bit (Original), but I have some problems with it. I first noticed windows update continues to operate without finding anything and then I wen
-
Call a help file (.chm) when press a button on the front
I can't call a help file (.chm) when press a button on the front. I have only called when press a key then right click the mouse and navigate the selected key for the button.
-
I used to be able to burn CDs, but now I can not... solutions?
I recently bought a new laptop, but I have a lot of music on this computer. I used to have no problem extraction and CD burning, but because I was not on this topic for awhile now it won't burn CDs at all. I'm not sure what would have happened. All i
-
High-speed router of the provider is located in the basement
Hello I think buying a system of Vonage, unless someone has something better to offer. My wireless router is in the basement because when Verizon Fios we passed to the fiber is the simplest installation method. My question is this: with my router i