Windows 7 Media Center TV Tuner problem

Similar Questions

• Qosmio G50 - cannot install the FM Tuner in Windows Vista Media Center?

  Can someone help me get the most out of Windows Vista media center with my new Qosmio G50.

  There is a tuner inside this laptop and I have the antenna and its plugged in. The drivers all seem to be installed but WMC tells me that I don't have the hardware to run FM stations and I can't make it work. Also, I can't record library but although I can't watch TV no problem at all.

  Someone out there have the answer?

  Hello

  Are you sure that your equipped G50 FM tuner to 100%?

  As I know a few models of G50 has been equipped with a tuner TV with antenna TV port that allows to connect a coaxial cable to this port to watch a TV program and then save.
  But as I said earlier, this feature is not included with all models of G50.

  Sorry, but I didn't find any info regarding the FM tuner.

• Problem, reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005

  I have problems with MCE 2005.  My hard drive crashed and the technician that restored my repressive said that he could not work in MCE 2005.  It's a shame because he was working before the hard drive crashes.  I work with windows XP.
  When I go to install the internet and begin to test the connection it gives me "Critical error of process - Code 2"
  When I go to the TV configuration, it tells me "Tuner not found".  Even if I know it works because I also Win TV7 in Hauppauge. My TV tuner is HVR-1600.
  With these problems, I thought that the solution might be to reinstall rollup 2 according to the Microsoft.
  http://support.Microsoft.com/kb/910905
  However, when I go to reinstall the Update Rollup 2, it seems to be to establish a restore point and then it stops when it hits hotfix (KB891593).
  I took a copy of the mcelog and have attached a copy of the log below.

  Assistance or management, you can provide me to solve this problem would be highly appreciated.

  At this point, I'm a newbie to this and I don't have a clue as to the cause of my problems and any ideas you may have for me would be much appreciated.

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB891593 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1046.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package

  Process creation: WindowsXP-KB895961 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1047.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899337-v2 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899510 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB888795 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB902841 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Creation process: KB900325.exe/quiet /norestart
  0x00000bc2 returned by process

  Function (ExecCmdInThread) Message of Post for the Package id: 1048.

  "Creative process: c:\0f7019deb34a2ccd3d5c2a4d9e4f3e57\bin\wmfdist95.exe/q: a/r: n /C:"wmsetsdk.exe/WMFDIST/q/r: n /DisallowSystemRestore.
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1044.

  A generic Package: 05/12/11. 21:26:14
  Looking for an existing installation of the generic package

  A generic Package: 05/12/11. 21:26:53
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 06/03/12. 21:27:50
  Looking for an existing installation of the generic package

  A generic Package: 06/03/12. 21:28:23
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 09:44:39
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 09:45:16
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 10:11:58
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 10:12:30
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  Hi kwanray,

  Welcome to the Microsoft community. According to the description of the problem, you can not reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005.

  I'll help you with this problem. I suggest you follow the steps in the article.

  Update Rollup 2 for Windows XP Media Center Edition 2005

  Reference: Support for Windows XP Media Center Edition 2005

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows Media Center TV tuner not recognized

  MEDIA CENTER TV tuner

  Our computer does not recognize the TV tuner, it says that the region (Canada) is not possible, even if we were watch and record the TV for two years. We took the tour get served today and the technician could not find anything wrong, that he hung the Tower while I was in the store and everything worked very well he played TV programs that we previously recorded on the computer. On their return, I hooked the tower to have the same problem until I took the tour of duty please help with advice.

  Hi Kimberly MacDonald,.

  1. What is the full error message that you receive?

  I suggest that you reconfigure the TV signal in the media center of Windows and check if it works.

  one) to configure the tuner for use with Windows Media Center, on the Start screen, navigate to tasks.

  (b) click settings, click TV, and then click Set Up TV Signal.

  (c) follow the on-screen instructions to complete the installation.

   

  Set up a TV signal in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-TV-signal-in-Windows-Media-Center

   

   

  Solve problems with watching TV on your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  If the problem persists, then you need to install the updated driver for the TV tuner card by visiting the website of its manufacturer.

  Get help for your TV tuner card

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-for-your-TV-tuner-card

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem changing channels in Windows 7 Media Center

  My Windows XP Media Center 2005 machine had a hard drive crash, and so I just replaced with a Windows 7 machine, also with a TV tuner.

  Old set up has worked perfectly, blaster/transmitter infrared has been able to control the cable box - Scientific Atlanta Explorer 2200 to Comcast.

  Set up the new machine, also with the IR Blaster.  New machine can change the channel correctly in 'Live TV'.  It works by pressing a channel upward / channel down, or entering the channel number.

  But when machine is trying to change the channel to start a new record, or jump off the Media Center Guide, it shows that the first digit, and then displays the cable box '? "and does not change the channel.  So I think it's something that the decoder does not correctly or correctly, interpret or Windows has problems, change the signal.

  I have experimented with different requirements of speed of IR and whether or not he must enter/OK but have not been able to make it work.

  Thoughts of what he must try or change then?

  Thanks for any help.

  Update on my original post.  I "think" I have success.  I am now able to change the channel using the guide and the system can change the channel while recording in the background.

  I went from the Scientific American cable on a 'Digital Transport adapter"box that Comcast sent me.  The manufacturer of the box is listed as "Made in China for Technicolor", and is the model number: DCI105COM1.  The box is extremely

  For the settings, I had to use: 3 digits, enter the channel number and the speed of the middle.

  Let's give it a few weeks and see how it works and if there are differences in quality.

• 64-bit Windows 7 Media Center does not detect not tv tuner

  Hello

  Windows Media Center is not able to detect my usb hybrid tv tuner in trying to set up live TV. When you try to solve any problems are detected, I downloaded the latest drivers and install and the device is listed as working properly in Device Manager.

  It is a kworld atsc usb hybrid tv stick ub445-u

  I am at a loss on what to do because there are several product reviews that say the tv tuner works very well with windows 7 with no hiccups...

  Any help or steps would be appreciated!

  Update

  Everything uninstalled and reinstalled media library but her has not helped either

  KWorld hybrid TV Stick UB445-U USB 2.0 is a Windows 7 Media Center compatible tv tuner card, and there is no need to install any third-party application.

  You can create a different user account with admin rights to check the issue.

  http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=KWorld%20UB445-U%20Hybrid%20Tuner%20Stick%20USB%20TV%20Tuner%20Card&v=KWorld&uid=UB445-U&l=en-US&pf=1&pi=9&c=TV%20Devices&sc=TV%20Tuners&os=64-bit

• Windows XP Media Center - Code 3 error when you try to watch the tv/record tv ratings, etc.

  I have a windows xp media center and all of a sudden when I try to use the media center, I get an error 'code 3' I tried to do a few different dates on the system restore but it did not fix the problem. I also tried to find out which driver to restore or reinstall but I don't really know what driver to do. I know that is not under the modem or a printer, but after that, I'm lost. Any help that anyone can give me would be greatly appericiated. Thanks in advance. Trevor C.

  Hello

  1. What is the exact error message?
  2 have you made changes on the computer before this problem?

  The following article might be useful:
  You receive an error message "Failed to save component", an error message "Critical process failure" or a "Tuner not found" error message after you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/910905

• Windows Vista Media Center crashes when I change the channel

  Original title: Windows Vista Media Center

  Since the beginning of June whenever I try to change the channel on the TV tuner in Media Center it crashes. I tried to do a system restore but restore never worked on my count. Problem event name: APPCRASH. Application name: EHShell.exe I'm looking for suggestions that might solve this problem.

  1] updated TV Tuner card driver. Visit the manufacturer's Web site and download and install the latest driver.

  [2] delete the file mediaCenterDataStore.db. By default, this file is located in the following location:
  %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB
  
  Delete: -.

  Start > run > type in %SYSTEMDRIVE%\ProgramData\Microsoft\eHome\mediaCenterDataStore.db > OK.

  Locate mediaCenterDataStore.db and right-click on it, select Delete.

  Restart the Media Center.

  S.Sengupta Media Center MVP

• Setup live TV in Windows 7 Media Center hangs at «Downloading TV setup data»

  Original title: Windows 7 Media Center live TV Setup

  I have Windows 7 Home Premium on your desktop Gateway SX2840-01.  I have a HP usb TV tuner.  I'm unable to set up Media Center to receive television through the tuner.  Put in place hangs at the page «Downloading TV setup data»  It just stay there with no error message or another pop ups. The line of progression on the display benchmark does not advance.  If I run troubleshooting, this indicates a problem and "WITHOUT difficulty".  The same tuner hooked to another computer had no problem with installation and operation.  This computer has Win 7 and the same drivers downloaded from the Hauppauge web site that has the entry door.  Please give me some possible fixes to complete set upward on the bridge.  Thank you.

  I solved the problem listed in the original post on this thread by disabling Windows Media Center and by removing all the files and folders in the shadow of Microsft eHome folder, then by restarting the computer.  I then enabled Windows Media Center and again rebooted the computer.  Of detailed instructions for each of these steps is available in Googleing or Windows support.

• Windows 7 Media Center: scanning channels - System.EntryPointNotFoundException

  My Windows 7 Media Center has worked very well for a few years, a few days ago, some television channels have lost their EPG and I then ran the channel scan who got in what relates to downloading the guide, then crashed as it seems to start to scan channels:

  System.EntryPointNotFoundException was not handled
  Message = entry point was not found.
  Source = ehiProxy
  TypeName =""
  StackTrace:
  at ehiProxy.BackgroundScannerClass.StartScan)
  at MediaCenter.FirstRun.GlidServiceScanner.Start)
  at MediaCenter.FirstRun.ScanPage.StartScanners)
  at MediaCenter.FirstRun.ScanPage.StartScan)

  ...

  I deleted it and reinstalled Media Center in Windows 7 features and erased, it has databases using "mcupdate - MediaCenterRecoveryTask" and deleted all the latest Windows updates (but not security patches) and I tried a different USB TV tuner but it always crashes.  As I know everything, but the channel scan works very well.  I don't often find chains so don't know when it went wrong, but can not think of a new software which would have affected it.

  Probably the exception I have now two incompatible parts of the software on the machine, but what are they and how can I solve this problem?

  Ideas please...

  Finally, I had all this work once again :)

  To do this, I uninstalled all Windows updates and patches safety installed this year, uninstalled Windows Media Center from Windows features, rebooted and reinstalled Windows Media Center.

  At this point, he still had the flaw.  Finally still with no idea of what could be the problem, I gave up, ran the scan channels one last time which failed, then reinstalled all the Windows updates, try running Windows Media Center Channel Scan again just in case, and it worked perfectly, the guide is also fully filled again.

  I guess you updates of Windows was installed incorrectly and killed the Media Center channel scan.

  Thanks for trying to help.

• Windows XP Media Center 2005 cannot connect to the Internet

  Dear all,

  I'm having a problem with Windows XP Media Center 2005. The problem is that when I connect the cable from the modem to the laptop, I only send packets without receiving. The IP address I get is also 169.254.207.207, which is not a valid IP address to connect to the internet, and so I guess that something is blocking the laptop to get the IP address. Another thing I noticed is that when I turned off the modem and restart it, I have connectivity maybe 5 seconds and then return to no connectivity.

  You guys can tell me what is the problem, and if I have to download something but in addition to the internet so that I can get my laptop to work. That said, I can connect to wireless with no problems.

  Thanks for your help and your time

  Martyna

  Hello

  Sorry for the question but what modem did you mean?
  A simple analog modem or DSL (broadband) modem that supports support a LAN connection.
  If you mean the second then I would check the TCP/IP settings in the properties of LAN card. The settings should be set to automatic

  You should also check that you firewall settings.

• Windows 7 media center tv guide planning lost .dll

  My anti-virus found a .dll suspect something like a regular planning. I deleted the .dll file and it seems that it was necessary for the update to Windows 7 media center tv guide (now displays the available data). I have reset media center several times with no luck. Unfortunately, I can't restore to an earlier date or obtain the file from my Recycle Bin. I still have Windows 7 64 bit upgrade disk if I can find the name of the file and know where to copy it in.

  Thanks for your help,

  jqh947

  Hi jqh947,

  1. you remember which dll file has been deleted?

  I would say Mr scanner SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows xp Media Center from windows xp media center for windows 7

  I have windows xp media center 11.  I need to have windows 7 to be able to configure the USB tv tuner to record/watch tv programs

  Hi Bevtravel,

  Windows Media Center on Windows XP, like Windows 7, can use external USB TV Tuner to watch/record TV. Make sure that external USB TV Tuner is compatible with the version of Windows Media Center that you have on your computer (2002, 2003, 2004, 2005, etc.).

  Access the link to learn more about recording TV in Media Center.

  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/record-TV/default.aspx

  Besides the link above, you can also access the following link to see what all is possible in Windows XP Media Center against Windows 7.
  http://Windows.Microsoft.com/en-us/Windows7/products/compare?T1=tab20

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Xbox 360 and Windows XP Media Center Edition 2005

  Hello

  Hoping to get help with this, because I searched everywhere and had not found an answer.  All the work around the items, reference Windows 7 and 8 not XP my Dell Dimension C521 shipped with Windows XP Media Center Edition 2005 pre installed.  I've upgraded to SP3 of XP.  A friend of mine gave me his old Xbox 360 (bought a new unit).  When I try to connect to the XBox 360 I get an error message in media library "uninstall the update for media center 2005 and then re-install the update of the site Web of Windows update.  Then, re-run Setup for Xbox 360'

  I checked in my under settinds program control panel, but don't see any element for Media Center 2005, even with show checked all of the updates.  I don't see Media player listed and 2 updates for it.  I have disabled the Windows Firewall did not help.  The Xbox 360 test shows that I can connect to the internet, Xbox Live (no NAT problems) and PC running Media Center.  It fails on the media center connection test.

  I don't want to reinstall all of the Dell backup image software supplied with the camera, I'll have to back up and start over.  Any help is welcome!

  Thank you

  Matt

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  I suggest for the link and follow the steps in the article:
   
  Error message when you try to install a program for the Xbox 360 Media Center Extender in Windows XP Media Center Edition 2005 with Service Pack 3: "There is a problem with the installation of Windows XP Media Center Edition 2005"
  http://support.Microsoft.com/kb/954622?WA=wsignin1.0
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.
   
  Also see Help links:
  Turn your Xbox into Windows Media Center Extender
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Extender-for-Xbox
   
  http://support.Microsoft.com/ph/7024
   
  Windows Media Center on the Xbox 360
  http://support.Xbox.com/en-us/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-Info
   
  I hope this helps.

• I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe.

  original title: error with ehshell.exe

  I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?

  This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.

  You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.