HP F2G72A stapler: stapler HP F2G72A accessory

Similar Questions

• HP M4555, mailbox 3 bins stapling (CE736A) - does not sort the paper during printing of z/os.

  Hello

  Shortly:

  Printing from z/os on HP MFP with stapling Mailobx joint - does not sort the paper. All the paper goes to an output tray, instead of outputb different locations, depending on the configuration of the printer settings.

  With more details:

  1 device (HP LaserJet Enterprise M4555fskm MFP printers):

  2 mailbox HP stapling 3 bins of 900 sheets (CE736A)

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/4AA3-2888EEE.PDF

  Our Organization has Mainframe, where the documents are printed (ESF printing system, language PCL).

  We have 3 print queues in Windows print - P1, P2, P3 server. All 3 have the common TCP port - at the end, there is multifunction print device: HP M4555, where we tied - sorter of stapling to the 3 bins 900 leaves HP (CE736A) and configured in this way:

  1 P1 queue prints to: upper left bin.

  2 P2 queue prints to: average left bin.

  2 P3 queue prints to: lower left bin.

  When I print the test page from windows server to P1, P2 and P3 - ir printed paper properly in appropriate output tray. But my problem is that these print jobs, coming from the Mainframe to these queues - are not sorted by bin (P1 to P2 - in the Middle, P3, Upper - Lower) - the paper goes to a location, for example - Upper (or if not configured device in Control Panel mode mailbox - Lower).

  I have fought with this problem too long and cannot be resolved.

  Driver, that is used:

  HP LaserJet M4555 MFP PCL 6.

  P2/properties/Device Settings:

  Accessory output bin: HP 3 stapler/stacker - Mailbox Mode:

  

  Output:

  

  I already tried to change the settings to:

  1 Windows print queue server settings;

  2. from the device settings (side of built-in web server);

  3. the side HP jet admin web.

  Nothing happens. For me it is too difficult, which is priority 1, 2. or 3. option, see above?

  Location:

  

  Impatience on your part.

  Andrejs Sobolevs

  Service Desk COMPUTER team

  This problem has been resolved the side Mainframe, VPS printing system. Administrator has made the installation program there. There is no need to do it on the side of the unit.

  Solved.

• HP Photosmart Plus 210: new ink cartridges - $62 at Staples: work only the color cartridges:)

  I bought new cartridges of ink today at Staples... a complete package of black and 3 colors #564.

  work of the colors, I'm disappointed... the colors are not as important as black ink.

  Gina

  In the paper here troubleshooting steps can help solve the black does not print on your printer Photosmart Plus b210.  Go through all the steps in order.

• HP Deskjet 1000 J110 series how to print on both sides of the paper and staple Yes to change?

  HP Deskjet 1000 J110 series how to print on both sides of the paper and staple Yes to change?  I looked everywhere I can think of. You are my last resort.

  Windows 7 ~ 64-bit

  Hello

  Unfortunately, this printer does NOT support duplexing (printing on both sides):

  http://support.HP.com/us-en/document/c02231304

  Kind regards.

• I can not get my PrintMater 8.0 to open since having tune up at Staples

  Last week, my computer was in service at Staples. They removed all viruses. Today I clicked on my PrintMaster, he showed for a second and never again. In my programs, it appears with more than 2,000. MO, so I guess it's still there. I called Staples and the tech said that they have not eliminated the program files, but if PrintMaster has been infected, the virus has been removed. I tried to uninstall it, and that no longer works.

  Hi DotGallagher,

  1. what happens when you try to start the program?

  2. you receive messages or error codes?

  Method 1:

  I suggest to run a SFC (file system check) scan on the system and check if the problem is resolved.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2:

  If this does not help then, I suggest to create a new user account and check if the problem persists. Follow the steps mentioned in the article below.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  You can also read the following article and check:

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Hope this information is useful.

• HP Color LaserJet 9500 - stapling feature missing in the printer driver Uviversal

  Hello everyone,

  We use a Color LaserJet 9500 in an enterprise environment. He had a hardware failure, our service partner repaired. Since then, the stapling function is missing from the universal printer driver. On the machine itself, we are able to use the stapler, but not on our PC.

  You can see from the attached images, official stapling is visible on screen captures, but on our machines, stapling is missing.

  How we miss?

  Thanks in advance!

  Paul of Hungary

  Don't know where on your driver, but he should be a tab like device settings on this tab will be a section called installable options and in this section that you will need to change the clip in not installed not installed. Most likely, the driver was reinstalled and the default probably isn't for the stapler unit. You must go to the folder of your printer and right click on the printer icon and then scroll the first properties if more than one and then left click and find the tab that has the installable options. Good luck.

• Staples relay USB key does not?

  Recently, I bought a relay 8 GB USB Flash drive, and it works great under XP. But in Vista, it will run for 2 seconds and then stops. I tried everything I can think of. (Tho can't really remind them now. =) Staples support has not been able to help me, (big surprise), so I guess it has something to do with Vista. I just installed SP2 as well and it still doesn't work. When I bought it, I have the formatted in FAT32, with the Vista laptop.

  It does not give any error message, it just stopped responding. Almost as if I would take it outside, but it's not. Whenever I try to open it, it closes. With whatever it is.

  Help, please. :( I have things that I need it.

  Hi Tosai,

  Welcome to Microsoft Vista answers Forum!

  Vista does not recognize devices that are the reason for the USB key to the FAT 32 format, that is perhaps not getting recognized, you may need to convert the machine to NTFS, follow these steps to convert the machine to NTFS:

  Click Start > type in the Device Manager in the research starting > expand disk drives to find the USB device > click with the right button on the player > select Properties > then go to the policies tab > select the "Optimize for performance" option and click OK, and then do the format, then select NTFS.

  Additional information: convert a hard disk or partition to NTFS format:  http://windowshelp.microsoft.com/Windows/en-US/Help/414a3808-283a-4e4d-b5ff-1a6d06f597d31033.mspx

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Color Laser Jet MFP M880 flow: Staple Option grayed out

  Hello world

  So basically one of our users has not had the function of staples when it tried to print a document. It is located in the tab out in properties during printing. But it was grey for him. I checked the drivers and everything was set up very well. No one else has this problem, wait for him.

  I use a HP Universal print PCL 6.0 driver.

  

  Anyone know what could be the problem? As you can see in my attachment, it works very well for me. This option is grayed out for a single user and is quite a problem.

  I hope someone is able to help me. Thanks in advance!

  >> ... Sometimes, it appears that it can staple, and sometimes it is simply grayed...

  Maybe for some reason, the driver periodically performs an action of "automatic detection" to check the capabilities of the target device and this fails, then the pilot sets the unit of the stapler by is not installed.

  Then a subsequent reverse it.

  I don't know that if or why the driver should do, but perhaps one of the possibilities is that the Automatic Configuration is not set to Off in the part of Installation Options in the tab device settings in the dialog printer properties for the instance of the printer in question?

  ... or maybe it depends on which paper size and / or paper type is selected for the print job?

• 2 PCs to a printer with Staples USB 2: 1 splitter - work light only one?

  I have two computers to a printer with Staples USB 2: 1 splitter but only one of the LEDs are lit and only that one works.  When I reverse the son again once the same side on works.  Is this new defective product or only light #1 and you must constantly spend to print from alternation of computers?  Thank you very much ~ is probably going to return the product because it does not work otherwise.

  Hello

  I got it now... did not know there was an installation CD inside packing... happy that I kept the package because I thought I was going to come back he ~ works great!

  Thank you

• Windows 7 OS disk for the Dell Inspiron new bought at Staples?

  I just bought a new Dell Inspiron 1545 at Staples this weekend.  Instructions and several responses from forum help, see using my drive operating system in the event of serious misconduct.  I note, however, that none of the disks that came with the computer seem to be my drive of the Windows 7 operating system.  He has been excluded erroneously, or is my Windows 7 operating system that is included in one of the following discs, & I didn't it?

  Here is what WAS in the box:

  * Dell Application - already installed on your computer: to reinstall the Dell Webcam Central software

  * Dell Application - already installed on your computer: to reinstall the software Cyberlink PowerDVD 8.2

  * Dell Drivers and Utilities - already installed on your computer: to reinstall Dell Inspiron and Dell Studio laptops software (content: device, Diagnostics and utilities drivers)

  * Dell Microsoft Works 9.0

  Is my Windows 7 (emergency) software anywhere on any of these discs?

  Thank you!  ~ Ashley

  When you buy a computer from a store, Windows disks are not included. The computer will have a utility that will allow you to create a recovery disk if you need it. If you have a question, I suggest that you contact Dell. Frenchie

• I don't have a product code for word 10 that was installed by Staples, when I bought my new laptop. Staples said that they do not have it. What should do?

  I bought 10 word a few years ago when I bought a new laptop, and had him install Staples. I later discovered that I need the key code of the product for Word and called Staples. They said it should be on the label at the bottom of the computer - but this number seems to be the code for Windows 7. I still need the code for Word but do not know how to find. Any suggestions?

  Belarc Advisor or MagicJelleyBean can recover the key on a working PC

• What configuration to use for the paper to use Staples label paper photosmart 5510

  I have a photosmart HP 5510, on paper defining it does not "thick paper" when you use staples or avery label paper.

  It shifts the label paper just by using the parameter "plain paper".  Suggestions as to what paper to use setting.

  Thank you

  This printer does not appear in support of printing labels according to the specifications of the product. You may be able to do work using a different printer driver. I will connect these instructions below. If this does not work, you will not be able to print labels with this printer.

  How to assign other drivers to print in different Versions of Windows

• Hello! I have the CD of Acrobat Pro DC version and then to buy the subscription monthly I couldn't code redemption to work for my MS Surface Pro 4... as obviously cannot use the CD but Staples has sold to me, I opened it: Staples said that they c

  Sorry I added it in the question, sorry about that part!

  Hello! I have the CD of Acrobat Pro DC version and then to buy the subscription monthly I couldn't code CD Exchange to work for my MS Surface Pro 4... as obviously cannot use the CD but Staples has sold to me, I opened it: Staples said that they could transfer to my Surface and they canceled the monthly... but no, I'm still paying every month and I have a box of cd $ 500 that I can't use! Help, please!  How can I activate this pay redemption code (which does not work? I tried for hours!) and I pay monthly?  Help, please!

  Hi shannonr44052735,

  I see that you have an active subscription to Acrobat Pro DC under your email address.

  See this KB doc for help: redemption code help

  If your redemption code does not work, I will propose you to return what you already active subscription.

  You can install Acrobat Pro DC from this link: download Pro or Standard versions of Acrobat DC, XI or X

  Make sure that you use the same Adobe ID, in which you have Acrobat subscription.

  Let us know if you need help.

  Kind regards

  Meenakshi

• It is a nightmare. Absolute total nightmare. Like a fool, I went to San Luis Obispo staples and bought Adobe Photoshop elements Adobe Premiere elements 14 and 14. I have logged on to your Web site with the code redemption and received your series num

  It is a nightmare. Absolute total nightmare. Like a fool, I went to San Luis Obispo staples and bought Adobe Photoshop elements Adobe Premiere elements 14 and 14. I logged on to your Web site with the redemption code and received your serial number. Of course, he did not.  Any of you have ideas.

  What is the error message?

  It is unacceptable to permit http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

• Print and staple of pdf Adobe Professional

  Hello

  Could someone tell me how to print and staple a document with 8 pages.

  I want"and"tp print double sided staple set by set (collect).

  The Xerox machine has good configurations, but for some reason, Adobe overwright this configuration.

  The result is 2 clips set set...

  Thanks in advance

  Found this in a froum:

  1. click on print, 2), click Advanced, click 3) check the box marked 'print the image's

  Works great!