Windows 7 mouse problem - my mouse has been lagging and skipping

Similar Questions

• My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is installed and running on the SSD, with my old drive system currently used for storage a

  My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is in place and running on the SSD, with my old drive system now used for storage as it is still readable.  The only product Adobe, that I reinstalled so far is drive XI but I would like to reinstall items 8 and Acrobat 9 without occupying more licenses that both are also installed on my laptop.  Can you tell me the best way to do it?  -Thank you

  If you have two activations allocated already and one was lost on the hard drive that has failed, then you must contact the Adobe Support via chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• My system has been repaired and the operating system has been replaced by a non-genuine version of Windows. How do we install the real version I used to have back?

  Windows vista installation

  my computer has been repaired and reinstalled with a non-genuine version of the window. I have now the true window vista but I don't know how to do in this regard.

  I just insert the disk and follow the instructions?

  Hello

  You need to change the Boot order to make the CD/DVD drive 1st in the boot order, then restart with the Vista DVD in the drive and follow the instructions.

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Here's how to do a clean install

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  See you soon.

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L40 - 14N: problem has been detected and windows has been shut down

  Help.

  My laptop worked perfectly well until my son used last night and went on various games.
  Since then when you turn it on, it is a blue screen that says: "a problem has been detected and windows has shut down to prevent damage to your computer.

  He said that he has downloaded something or added a new hardware or software.
  So, off it and tried.
  Have tried everything to make it work. tried to get into F8 and F12.

  Tried from the safe mode and the recovery disc tried following all the resulting instructions always blue screen.
  Not knowing what else to do. I have

  s he Knackared now?

  As I got the BSOD appears also after the use of the disk recovery and after a fresh install of the OS.
  Is this right?

  Unfortunately, buddy, but sounds more like a hardware problem as a problem related to sound.

  I would contact a technician for laptop and organize an audit of the material.

• "A problem has been detected and Windows has shut down to prevent damage to your computer"... * STOP: 0x0000007e (0x805c49b8, 0xf7a172b4, 0 x 80000003, 0xf7a16fb0)... blue screen

  Hello!

  For the life of me I can't figure out how to get my machine to boot successfully. Nothing changes when I choose Safe Mode, last known good Configuration, enable VGA Mode, booting, Directory Services Restore Mode or Debug Mode logging.

  It's very stressful, because I'm right smack dab in the Middle a semester at the College. I have most of what I currently need access to supported illuminates... but not quite all :( It is also very reassuring to be able to take care of the school of work away from the library of the University. Yesterday, my computer was working fine... I think that Windows has completed an update, if I can't remember now. As I woke up this morning, I was not able to boot all the way to Windows only once.

  My laptop is a HP Pavilion dv6000 running XP Media Center, and I have not installed new hardware since I bought the machine about 3 years ago.

  Here are more details, where they can help in the diagnosis of my problem:

  • ID of the system board: 30BB
  • Type of processor: Genuine Intel(r) CPU T2250
  • Processor speed: 1730 MHz
  • Total memory: 1024 MB
  • Video memory up to: 128 MB
  • BIOS version: F.06

  Here's the entire message to the blue screen:
  - - - - - - - - - - - - - - - - - - - -
  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.

  Technical information:

  STOP: 0X0000007E (0X805C49B8, 0XF7A172B4, 0 X 80000003, 0XF7A16FB0)
  - - - - - - - - - - - - - - - - - - - -

  I also learned to a blue screen that says something about "PAGE_FAULT_IN_NONPAGED_AREA". I think that this happens when I try to start safe mode.

  Also, I never did much with computer problems beyond what could be repaired with the restoration of the system... so not being is not able to boot at all me has to stop. Please, I beg you! Help me?!

  With great appreciation for your time,.
  Damaya

  Quick suggestion

  Some HP partition the hard drive. have you tried to type F11 or F12 during startup (before that he go to the option mode start screen)? It might take you for a HP recovery program in that partition (because windows don't be loading not to use that recovery)
  Good luck

• When I turn on the computer, the screen indicates "a problem has been detected and windows has shut down to prevent damage to your computer.

  Original title: when I turn on the computer.

  the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.

  Hi Cjdaniello,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• disc has been removed until windows xp has been installed and now it won't do anything

  I was installing windows xp and the installation screen had left and it was there the windows screen and the words please wait I already have windows xp on the computer and I thought he had problems, so I used the reinstallation disc provided with the computer which is a dell optiflex. but before the end of my sister installation remove the disc, now all I have is a screensaver with microsoft xp logo and no task bar and I tried to use the disc again and nothing happens everything has been removed and she released the album before everything has been reinstalled. Help

  Hello

  I suggest to refer to this link and follow the steps below linka nd try reinstalling Windows XP again and check if this may help:

  http://support.Microsoft.com/kb/978788

  It will be useful.

• Windows has been removed and once again, the Epson Stylus CX4800 printer acceptable printers.

  Download driver printer Epson Stylus CX4800, etc., last nite... today do not have access to the printer... Windows has been removed and once again, the Epson Stylus CX4800 printer acceptable printers.  What can I do to get this printer permanently replaced on the acceptable list of printers or if I should buy a new printer!  This has been a problem for almost 2 weeks now... What can I do? Every time that you add the printer to the list as soon as I turn off the PC, the printer is removed from the list of Windows! Is this a defect of the windows program I or is this printer is no longer one that windows will recognize?

  Help!

  Hello

  "Every time that you add to the list"

  We do not do anything.

  It is not Microsoft.

  These are public Forums set up by Microsoft on their servers and animated by them.

  We are mainly Windows users help each other here.

  Here is the link to Epson to the latest drivers for your printer model.

  Choose the appropriate operating system from the Menu drop-down.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=58606&BV_UseBVCookie=Yes&infoType=downloads&platform=OSF_W_VISTA-32

  And a Troubleshooting Guide for it.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=58606

  See you soon.

• My hard drive has been corrupted and I had to format and reload windows 7. It has worked OK for 6 weeks, but now says it is a counterfeit copy

  My hard drive has been corrupted and I had to format and reload windows 7. It worked OK for 6 weeks, but now says it is a counterfeit copy. I used the original product key, when I rebooted it. Ideas?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• Why the option "show me other ways to activate" in 'Screen of Activation Windows' has been disabled and grayout outside?

  Hello

  My company PC have installed the version of 7-64 bit window, these computers are not allowed to connect to the internet for security reasons. On other computers phone allows us to make the windows activation. But on a PC, the option "Show me other ways to activate" in 'Screen of Activation Windows' has been disabled and grayed out out. Any suggestion to solve this problem?

  Thanks in advance.
  Allen

  Try this method

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• I get errors certificate on the websites I visit. How will I know if my connection has been intercepted and how can I fix this problem if it has?

  I get errors certificate on the websites I visit. How will I know if my connection has been intercepted and how can I fix this problem if it has?

  Check your date and time system and make sure that they are correct.

  Update your Windows.

• Windows 8 has been deleted and my windows.old/programfiles?

  I was rather annoyed that windows 8, rather than integrate my existing programs and settings, pushed everything including parameters in windows.old/ProgramFiles (what is the point of having a check box that says 'keep existing settings' if it has not yet rendered my inaccessible email until I downloaded windows live mail again?)

  However, after hours of violin, I managed to do a combination of programs to re - install and run with difficult settings from the file directory windows.old/program through desktop shortcuts
  In recent days the shortcuts no longer works and I see windows 8 has been deleted and my windows.old/programfiles directory!
  It is not in my trash, it isn't in my forties AVG
  
  Anyone know where it is!
  I did not understand why windows 8 should go through all my programs from the road, so it would take me hours to do shortcuts... but deleting the entire directory and my settings? Come on, this is ridiculous
  HELLLLP!

  Andy

  Hello

  Thanks for posting your question on the Forum of the Microsoft community.

  From your problem description, I understand that the Windows .old folder is deleted from your computer Windows 8.

  To better help you, pease provides us with the following information.

  1. When did you install Windows 8 on your computer?

  I understand that the inconvenience caused to you, unfortunately widows .old folder will remove automatically after 28 days, as Windows has been installed.

  It will also remove automatically when the player has less than 10% free space.

  I'm sorry to inform that it is not possible to recover if the Windows.old folder is deleted from your computer.

  Response with the required information. If you have additional questions, please get back to us and we would be happy to help you.

• Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

  Original title: recovery of original windows 8

  When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

  Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

  Hello Vishal,

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

  See the suggestions posted by Andre Da Costa replied on March 7, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

  In addition to this, see:

  Product key lost or misplaced (certificate of authenticity) for Windows

  If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

  Hope this information was useful.

• My iPad has been slow and unstable. What can I do if this is caused by a virus from the Internet because that is what I suspect. The problem started after a message like "scripts to run.

  My iPad has been slow and unstable - it actually seems to be hung when I use it. Once I put it, a blue line with four faces (which forms a rectangle or square) appears on the display and moves as he tries to anticipate my next actions or touch on the scree. All started about four days ago while I was downloading of articles in google scholar. A message that reflects something as "run scripts" or "scripts to run" appeared just before the problem started. Please advise on what I can do.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.