Windows 7 network problem (network computers and devices slowly filling)

Similar Questions

• 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  It took a reinstall (upgrade) to get actually it works again.

• After replacing my HARD drive with a 1 software to, serverals collapsed at work, such as messenger, Windows Update, network (printers and computers cannot be seen).

  I use Windows Vista SP3, Intel core Duo, 1 TB HDD processor. I copied the two partation, I had (from old HARD drive). After that my msn, the network (only the local network, internet is ok), Update Windows... stoped working. I got a messenge for windows update in saying that the service is not running, but according to services.msc it still running. When I try to sign in to Messenger, it is said that the service is temporarily unavailable.

  How ould I do to fix?

  Kind regards

  Carlos sales Junior

  Hello

   
  How the printer is connected to the computer-wired or wireless?
  
  Method 1:
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  Method 2:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Tab Windows Home Server 2011 dashboard computers and backup no longer displays the server as a backup computer

  The tab of my Windows Home Server 2011 Dashboard under computers and save watch is no longer the server as a backup computer.  I have a drive that is put in place and it appears in the server hard drives and folders tab. So I can't say if the server is the backup folders designated or not. Help is appreciated!

  Hi Curleyjack,

  Since the issue is with Windows Home Server, I suggest that you post your question in the Forums Windows Home Server.

  Windows Home Server Forum

• Need help to try the Windows 7 network computers after the plant level and fresh

  I'm having a bad time trying to network Windows 7 computers after a few updates and install fresh is someone as trouble with windows 7? homegroup? IsUP WTF? Tried x

  Hi Bert Primus,

  Welcome to the Microsoft community forums!

  If I understand correctly, you need assistance in networking to Windows 7 computers after the upgrade. I've surely you will help find a solution on the issue.

  1. how many computers trying to network with each other?

  2. what happens when you try to connect to the computer as a whole?

  3. do you get an error message?

  Method 1:

  If you set up a home network in Windows 7, see the article:

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/is-is/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  See also:

  
  Networking
  http://Windows.Microsoft.com/en-in/Windows7/products/features/networking

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  Method 2:

  To learn more about homegroup in Windows 7, check out the links below:

  What is a homegroup?
  http://Windows.Microsoft.com/is-is/Windows7/what-is-a-HomeGroup

  
  Homegroup from start to finish

  http://Windows.Microsoft.com/en-in/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win8tab1&V2H=win7tab1

  Home Sweet homegroup
  http://Windows.Microsoft.com/is-is/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Provide more information about the issue so that we can help you. Hope this information helps.

• The Windows 7 network computers lose connection to all printers

  Printers are on a Windows 2003 cluster server.  I installed several Windows 7 workstations.  Workstation will lose the connection to network printers. When you try to print that they receive "Windows cannont print due to a problem with the installation of the current printer.  The user can re-boot, then print.  Sometimes it takes several reboots, or if the administrator connects and disconnects and allows the connection of the user (power user rights), then it will work. I tried to update the drivers of the printer on the network. Help!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 networking broken (and fixed)

  It is not so much a question as it is a public service announcement.

  A week ago, networking has stopped working on my Windows 7 Ultimate machine.  The built in ethernet adapter has been enabled.  The pilot looked good and was up to date.  Everything was beautiful.  But the icon in the system tray network had a big red X and windows refused to see the network.  When you enable the network controller, it wouldn't go through the normal DHCP dance and get an IP address.  He wouldn't even ask a.  Static IP no longer works.  I could put in the correct values, but he refused to see the network.

  After the top for a few days, I decided that the jury of network on the motherboard must have failed.  Then I went out and bought a wireless card throw PCI to hold me until I could get a decent ethernet card.  After setting this up, he could see wireless networks.  But when you try to connect, no IP address... even as a member of the Council.

  I've done some digging in google and tried again to find the problem.  Someone said that Hello had caused them some problems, and you must update to the latest version.  I just uninstalled.  This corrects the problem.  Hello is apparently a software from Apple, and I think related to iTunes or iPod.  I have not tried to connect my iPod yet, so I can reinstall this gem shortly.

  Brian

  Hello

  Thanks for sharing this information, it will help others solve this kind of issue. In case if you have problems related to Windows, feel free to post on the Microsoft answers Forum and we will be more than happy to help you.

  Thank you.

• Navigation for the AVG firewall Windows XP - network sharing and occasionally be blocked due to uknown UDP outgoing local traffic remotely different ports... Repeatedly enters FilterDevice in the firewall log

  Various involved Ports:
  Local: 257 remotely: 513
  Local: 513 remotely: 6146
  I also saw port 259 and a few others...
  The firewall settings work for various other users, but seem to don't like is not something in my configuration.

  As a member of a domain running Windows XP Pro SP3
  When it blocks the traffic, they are always directed to a remote IP address of a domain within my local network controller. I uninstalled a lot of applications, and made sure I have no services for unix/linux installed.  For a bit, I thought he may have something for security certificates because my computer and user accounts are configured with our local CA... I doubt, however, that is related...

  I also know that my domain name is not the configuration as tight as we would like to see because we had to reduce some of the security settings for old Windows 98 and AS / 400 systems.  So I remember an old key "reg" which might not help:
  Location: HKLM\System\CurrentControlSet\Services\lanmanworkstation
  \Parameters
  Key: enablesecuritysignature
  Initial value: 0
  New value: 1
  This changed seemed to help but then after another it reboot started appearing again...

  Amaranth Hello,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to the area and would be better suited to the TechNet Forums community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Keith
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 sounds decreases between Applications and devices (Dell Vostro 1015)

  I'm having a problem where all that sound comes from applications Stoops when he goes to the peripheral output. To illustrate the problem, here is a picture of what's going on.

  

  I turned on and turned off all the improvements, changed options of exclusivity and changed the format of sample rate.
  I know that's not a hardware problem, because sometimes the speaker will be a decent volume, but only temporarily, usually until when I update the volume in firefox or another application that I use for sound.
  The thing that triggers this turns on the improvement of Loudness equalization, change my 24-bit, 192000 Hz sampling rate and by checking the boxes 'allow applications to take exclusive control of this device' and 'give exclusive mode applications priority '.

  Hey Evan,

  Thanks for posting your query in Microsoft Community.

  There could be possibility of hardware problem. However, let's try the following and check.

  Run utility troubleshooting for discover connection issues that may exist, the instructions are below:

  Click Start > Control Panel

  Type of troubleshooting in the top-right search field > select "troubleshooting."

  Click "Hardware and sound" > select "play Audio".

  In addition, please refer to the tips in the article below and check.

  No sound in Windows

  Tips for solving common audio problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Windows vista activation problem product ID and Java (0xc0000005) fatal error after installation of windows vista format.

  Original title: try to put wrong question ID problem!

  Due to problems of Java, I formatted and made a new installation.  My Vista Home Premium says its active.  When I try to put my product id was not found. When I try to leave microsoft to find that they can't pick up my computer and I can't enter by hand, he said its incorrect.   When I try to ask online chat, I cut that they deal with activation problems.  It is activated, I can't get the Web site recognize my product id, so I can post for help?  The world is - that sound familiar at all?

  I have fatal routine Java errors when I play a game Runescape.  I'd appreciate any help anyone could give me. Thank you

  A fatal error has been detected by Java runtime environment:
  #
  # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6d884dca, pid = 3032, tid = 2976
  #
  # Version JRE: 6.0_30 - b12
  # Java VM: Java hotspot Client VM (20, 5 - b03 in mixed mode, sharing windows - x 86)
  # Problematic frame:
  # V [jvm.dll + 0x94dca]
  #
  # If you want to submit a bug report, please visit:
  # http://java.sun.com/webapps/bugreport/crash.jsp
  #

  Hi Verisetti,

  Have you installed security software after formatting windows?

  If so, you can uninstall the security software temporarily and check if you receive the access violation error.

  If the uninstallation of security software solves the problem, you may need to configure the settings of the software of safety accordingly. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you install the security software after the trial.

  What about Windows vista product ID, you can try to validate Windows and check if it helps.

  For more information, see the following articles:

  What is the validation, and how does it work?

  Genuine Windows: Frequently asked questions

• Windows 8 store problem of cache and licenses

  Hello

  I recently bought a computer dell laptop Windows 8. I have a few problems in the windows store. I'm unable to update or check out all the new apps on the store. I continue to by clicking on the icons of application but nothing downloads and updates existing fail as well. When the troubleshooter in Windows 8 App running it is said that ' Windows store cache and licenses can be corrupt " I cleared caches and updated licenses both manually and through the application of the resolution of the problems, but the problem persists and I get the same message of the cache corrupted every time troubleshooting tool. Any help would be appreciated.

  Thank you

  Thank you very much for your reply, Prandeep :)

  I have no day my computer, nor have I received error messages. I could scroll down and browse the store but it was insensitive to all clicks I did, so I was not able to download/update anything

  When running the troubleshooter, I still got the message on corrupt cache even after fixing using the Troubleshoot utility.

  However, I have just above, came the problem. I have consulted the storage of the C drive windows folder and manually created a cache folder.

  I read the solution on a Web tech site and it worked for me.

  Will put in place a link here for all other people facing the same problem, as soon as I find them still.

• Can homepage of many computers and devices I sync to my pc at home with FireFox Sync

  I was wondering if it is possible to merge the browser information from more than one device of Fire Fox

  Sync uses a server to store your data for synchronization of multiple devices, it is not a direct connection from one device to another device. I don't know there is a limit to the number of devices that can use the same sync account, I had 5 devices on the same account with no problems.

• Windows 8 compatibility problems (no MUSE and Quicktime .mov files)

  I'm bummed that Adobe Muse seems to be compatibile with Windows 8. I just bought a new machine with 8 on it and I'm trying to get used to. So far, it of a real disappointment and also the fact that Quicktime (and, therefore, the .mov files) are not compatible either. ANY help would be great. I can be downgraded to Windows 7 if I can't find a solution. Recommendations?

  Thank you

  Adobe Muse is compatible with the desktop version of Windows 8. Muse is not compatible with the version of RT Windows 8 tablet (ARM).

• Firefox installed on Windows 7 but the menu bar and icons is filled with small horizontal lines on the icons and the menu bar...

  I installed Firefox 21 on a new Windows 7 operating system. The menu bar and the toolbar at the top of the windows is full small horizontal lines. Sometimes, there are more lines and sometimes less. It makes the icons and menu items almost impossible to see. So far, is that the Firefox screen that made it. Other programs I have installed so far doesn't do this.

  Any ideas?

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Impossible to activate permanent "network discovery and file sharing" in advanced sharing without turning windows firewall at the wide service.

  Environment:

  I have a workgroup Windows 8 pro PC with all updates from Windows update. The PC is connected via WiFi (home) to a router (the same thing happens if I am connected to the router directly via RJ45). It's my "private network (NAT). I have the Windows Firewall is enabled in its default configuration. I use "Windows Defender" as my protection\firewall of virus software.  "When I go to: change options for sharing different network profiles" under advanced sharing options. I try to turn on file sharing and network discovery in the private profile. It shows that "the private sector is the current profile. The radio button lights. However, when I go to the file Explorer / network I got the message ' network discovery and file sharing are turned off. " The network computers and devices are not visible. Click here to change... " I click to change, however when I click to change it keeps returning and gives me the same message. I then go in ""network control and Internet\Network and sharing Center\Advanced sharing settings " and the option buttons in private profile for the network discovery and file sharing are turned off."

  If I turn off the Windows Firewall. Everything works. I need to open a hole in the windows firewall for 2 applications was discovered and network file sharing. I opened rather not just blindly ports. However, if this is the only solution, what ports do I need open.

  Hi all

  I have exactly the same problem.  (and I'm not the only one. - There are many!) The problem does not lie with the Windows Firewall. If I turn it off, discovery network and file sharing is turned on-tour he turn it back on and its all disabled subsequently and the rest of the way.  I've been round and round the forums of the world looking for a solution but still find a definitive answer. Can certain software engineering in Microsoft Please arrive at the correct answer.

  Thank you very much

  PT.