Windows 7 not starting not not by any sign of power

Similar Questions

• Backup files Vista - "Windows could not find any backup sets [file path]."

  I have a Vista computer.  The hard drive broke so until I replaced it I backed up all the files on the computer to another computer running Windows 7. I did it in the backup and Restore Center.  I made a backup of files, not a full backup of the system (I've seen the full backup of the system mentioned in other posts, but that was not an option... maybe which is only available on Vista Premium).  In any case, I replaced the hard drive and then try to restore the files, but I get the message "Windows could not find any backup sets [file path]."  Anyone have any ideas?  Thank you.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck!
  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 8 blocked to 13%/Will Windows Update not load any OS

  I have recently upgraded to Windows 8 on a Lenovo ThinkCentre PC.  Three days later, when I finally had the chance to explore the operating system, the PC suddenly warns me that it stops to install updates.  Let him install the update but it is stuck at 13%.  During the six hours of waiting, I noticed that the PC keeps restarting once every 30 minutes.  At this point I because the office and try to start it in Mode safe mode (SHIFT + F8).  Safe mode seems to work and I then reconnect to check for problems in Windows.  I was told that the driver sound or anti-virus can be the question so I uninstalled my antivirus.  Before that I could finish the uninstall, Windows starts once more to close the programs and stop them.  He tells me to "Please wait while it installs the updates... "I never had a warning or anything like that.

  So my PC restarts and bring back me to the same screen.  It increments to 13% and stops.  I wait another 2 hours before the powerfailing again.  Ms tells me that I may need update my PC and explains how to do this.  When I get to the screen to refresh my PC and select the option, my PC just freezes and does nothing for a few hours.  At this point, it is almost an entire day just trying to install an update.  After a few hours, my PC restarts and lead me to a screen that says "auto repair failed" and it gives me 2 options: Shut Down or Advanced Options.  When I choose advance options, it brings back me to the same screen that I was at the front where I can refresh, reset, or stop.  No matter which I select, it freezes and resets after a few hours to a black screen with a blue Windows logo and a ring of spinning of points.
  Seeing that something is really wrong, I disconnect my external backup to ensure that the information I have (library of music family photos/set) is correct.  I plug my external laptop and to my horror EVERY SINGLE ONE of my files has a generic icon (white sheet of paper) that does not open!  None of my MP3 or JPEG files opens.  I unplug the external and that someone else plug it into their PC and now I have NO file.  They can see from the outside and move files in there very well, but it's almost like my drive has been corrupted and then reformatted.  If at this point, I lost my full backup with all my information (family photos, music library, database of KeePass, a few years worth of .pst files, etc..)
  I spend the next two days speaking with Microsoft and they come to the conclusion that my data was lost (both on my external hard drives and desktop) and I need to re - install Windows 8.  I put the DVD in the drive and choose to start using the DVD.  Nothing.  It brings back me to the exact same screen with blue Windows logo.  Remotes tech in my laptop and check the disc and everything seems in good condition.  Try us again and it always brings back me to the same screen.  At that time, it downloads Windows 7 and advises that we put on that return.  After 3 hours (close), it finally downloads and it puts it on my USB.  I select the USB to boot after the PC is powerfailed.  It gives me the message: could not load the operating system.
  So, at this point, I lost ALL my data and my desktop PC was essentially bricked since 5 days with absolutely no resolution.  Office worked very well during the past year with Windows 7, but Windows 8 days and even I can't use it.  Microsoft says have absolutely no knowledge of the same question if their own forums and full of people have the same problem with the update.
  I am looking for help with a problem that caused Windows 8.  The situation is becoming worse than Win98 and Vista!  I lost almost a week with Microsoft technicians to tell me that it is a problem with "my system".  Really?  Well well... my system was working fine until I was stupid enough to put Windows 8 on it.
  Ranting side... Help, please!  I lost everything this week and I'm looking to rebuild.

  Hello, DefaultUserOne,

  Try the solutions listed here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/Windows-Update-on-Windows-8-not-working-stuck-at/dc22f534-be29-45CB-ad4e-c7803c7feeb4

• My music app 8 windows does not show any xbox options music... in the opening, it just shows my local music

  The title of the app is always music not Xbox, how can I get Xbox Music on my Windows 8? even the case of videos. His shows videos no videos Xbox.

  I got the reason for this. For me, iam in music of the India and the xbox is not available in India. This may also the right for you. To get the music from the xbox, just change the location in the United Kingdom we something in "change of position" under region (we can get by searching for "change location" in the Panel). Thank you

• error code 0 x 80070002 "Windows could not complete any requested change '"WindowsCannot find the file specified. "

  Windows 8

  Hello I get error code 0 x 80070002 when I try to play downloaded games.  I tried to play Roller Coaster Tycoon and Age of Empires 2, downloaded from Steam and I get this error even for the two games.  I searched around, and it seems that other people with this error code have very different problems (any of them get trying to run a game).

  Any help would be great.

  Hello Trevor,

  Please provide the necessary details.

  From the description, I see that the problem is specific to games that are downloaded from Steam. Adding weight to this statement, I noticed that you are able to play games without any problem. I suggest you contact the community Steam Support to improve assistance in this regard.

  Keep displayed if you need help.

• Open the link in a new window does not. Any ideas how to fix?

  Hello

  I created this Web site

  Haven of the legends

  On the Club of mountaineers page there are links in the text, I clicked on the box in the hyperlinks to enable the option, but the link opens in the same window.

  I tested it on Chrome and Safari and get the same result with block popups checked and unchecked.

  Help, please.

  Jason

  Hello Jason,

  I tried to reproduce the problem at my end, but it works very well at my end.

  I would like to take a look at your .muse file, please send it to me through via Dropbox or any such similar service.

  Please share the download link of file in a private message and for this hover just mouse over the username and click on "message".

  Best regards

  Ankush

• Error code 80070490? Windows will not find any updates?

  I've seen this before, but none of the other post saying how to fix? How can I fix this error?  Vista 64 b

  Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  See...

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Invisible signatures by the incremental update does not have any signs?

  Hi all!

  Sorry if here is not the right place for my question. If this is the case, is - can someone inform in the right place?

  Well, I am trying to build a tool to sign a PDF of incremental update using Delphi [].

  I am beginner in PDF structure and the brevity of the time made me perhaps a bit inattentive and desperate.

  After 2 months of hard fighting, I managed to get Acrobat Reader know my PDF (initially created by a java tool called SignServer) has a signature and recognize the certificate but it says that the certification is not valid because 'the byte range is invalid.

  I analyzed the PDF file in a hex editor and the byte range signature so any other object compensates seems correct.

  My PDF test is here: https://drive.Google.com/open?ID=0B0KKmaB-a0Z4SDZfNXdZRWZEem8

  Can you tell me what the problem with this PDF?

  Many thanks for any help!

  Specifications and PDF language

• Windows XP does not detect any internet at all despite the computer with the modem to work.

  I recently installed Windows XP Professional on my new iMac via bootcamp.  While Windows itself works fine, it won't connect to internet at all.  Despite being connected to a modem ADSL via a Ethernet cable, and also have wireless internet, Windows does not detect any signal.  On the internet in the Control Panel, all connections page that appears is "1394 connection" under the heading "LAN or Internet high speed."  I tried several times to put in place a new internet connection through the Setup Wizard and everytime, no internet is detected.

  I know that the modem works because all the other computers in my house are fine online, including on the side of Mac of the iMac.  If anyone has an idea as to how I should resolve this problem, your help would be greatly appreciated!

  Thank you

  Daniel

  Moreover, these are things I've already tried:

  I've tried to manually and automatically set up an internet connection
  I spoke with my ISP, the modem works fine
  I have re-partitioned the hard drive and reinstalled XP

  The "1394 connection" is the IEEE 1394 (FireWire) from your computer.  There should be cable system and under the heading wireless connections "LAN or Internet high speed."   There is no need to run the Network Setup Wizard or set up a new connection.

  Open the Device Manager (Start > run > devmgmt.msc ) and go to the network adapters section.  You may need to install the drivers for them.

• Windows was not able to find any backup sets

  My hard drive crashed yesterday. I knew it was coming and made a full backup of the system using Microsoft Backup and Restore last thing before it crashed. I backed up on my external hard drive. I replaced the failed hard drive and reinstalled Windows Vista Ultimate x 32. Now when I go to the backup and restore, select Advanced Restore > Advanced Restore > files from a backup made on another computer > FreeAgent drive (f) (the name of the external HD), I get the error message "Windows could not find any backup sets on F:\.» Please select a different location. »

  I can see various research (executed on another, operating system Windows 7, because I have no internet access on my computer that has only Windows Vista and nothing else installed on drive hard nine), I can not completely a cumbersome process involving download Virtual Server 2005 that it works, but I seem to not be able to find the download file to actually download.

  Download Microsoft Virtual Server 2005 R2 SP1 here:

  http://TechNet.Microsoft.com/en-us/evalcenter/bb738033.aspx

  And the solution to your error message is located here:

  http://www.Vistaheads.com/forums/Microsoft-public-Windows-Vista-performance-maintenance/48541-restore-wont-find-backup-set.html

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.

• Windows 8 store does not install any application

  Hello Microsoft. My name is Mikado and I own a dell pavilion g6-2301ax. It comes with a windows pre-installed 8. The problem ive had to deal with is that the store windows does not install any application. After you download the application, it displays a message that the application could not be installed. The same thing happened with the update of windows 8 for windows 8.1.  Could you please help me with how I can solve this problem

  Thank you citrus but it was actually the firewall in my system that it blocked. I had to install the BFE service that does the work. Now I can install any application from the store windows.

• Mail window will not receive ATT email error 0X800CCC90, 0X800CCC0F and 0X800420CD.

  Original title: Mail window will not receive any emails ATT

  After you have not used my Windows Mail to receive my emails on my Dell computer that uses Vista Ultimate for two weeks, now I am unable to receive emails from my ATT yahoo email account.  Whenever I try to receive I get #14864 and 14865 with error 0X800CCC90, 0X800CCC0F and 0X800420CD messages.  Will you please tell me how to solve this problem, so I can use my Windows Mail.  I have no problem sending and my account is set to pop.att.yahoo.com.

  Hello

  Have you done any software or changes to the material on the computer before this problem?

  You can check these links.

  Solve problems with Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Refer to the steps from the link that resolves a similar problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/cannot-send-or-receive-emails-in-Windows-Mail/3306783c-7a07-4cea-86d0-ad750723a027

  For reference:

  http://support.Microsoft.com/kb/942495

  Check if it helps.

• I just installed Windows 7 on a PC that I just built. Being new to Windows 7 I started to play around him and did not find any games at all. Does anyone know how to fix this?

  I just installed Windows 7 on a PC that I just built.  Being new to Windows 7 I started to play around him and did not find any games at all.  Does anyone know how to fix this?

  Salvation Ita; tribal

  Congratulations on a newly built Windows 7 computer. Selected games may not be that is the reason why you are unable to find all the games on the computer.

  Follow the steps to turn on the games feature.

  1. click on start.
  2. type optionalfeatures.exe in start search.
  3. place a checkmark for the games.
  4. click on OK.

  After the computer has been restarted, check if you can play games on your computer.

  See the article: features on or off Windows activate: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers Feedback Forum and tell us what you think.
  

• Qosmio G45-AV680 - Windows could not start

  My cousin has this laptop and could not start the system. It displays the message:

  "Unable to start Windows. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you don't have this disk, contact your system administrator or computer manufacturer for assistance. Status: 0xc000000f

  "Info: the boot selection failed because a required device is not accessible.

  I tried to go into safe MODE, but it cannot do so. It starts to load the drivers, but it stops at some point and will not continue...
  The problem is that she did not have any DVD with laptop. I guess that the Vista operating system, that comes with it is the special partition on the hard drive, but how can I access it? How can I reinstall the system? I don't mind if I lose data, I used just to make it work...

  If DVD recovery is not assured that means installation of recovery can be started from the HARD drive. I don't know how it works exactly on cell phones in the United States. Try pressing zero button after starting upwards to see if HARD drive recovery option can be started.

  By the way: check the Toshiba U.S. support under http://laptopforums.toshiba.com/tshb/ forum
  Maybe someone there can explain how it works to start the installation of the OS on the HARD drive.

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...