Windows 7 - OEM - Pro 32 bit - > 64-bit

Similar Questions

• Windows 7 OEM Pro 32 Bit will provide drivers? Espescially LAN driver?

  If I install a recently purchased new Windows 7 Pro 32 Bit OEM, will I lose my drivers, especially my LAN driver.  After Windows 7 type of installed clean detail he worked drivers with digital signatures to Microsoft.  OEM provides the generic Microsoft drivers as the retail versions do?  I have more key for my retail copy.  I did the upgrade of Windows 10, he wiped my Windows 7, I did a clean install of Windows 7, but it will not activate without lost key.

  Hello

  If previous retail Windows 7 clean install provided drivers I needed, the OEM 7 would also provide them (for the same devices)?

  Not necessarily, because you may have been using Dell recovery media which has been customized by Dell and injected with drivers specific for your model Dell computer at the factory.

  Long version of the question below

  About network drivers for all three machines currently running Windows 7, but do not activate or allow changes (bad copy needed to recover from 10 Windows could not upgrade).

  1. I have a Dell Dimension E521, currently using

  According to the Dells, the latest drivers that they have is for Windows Vista, you can use.

  http://www.Dell.com/support/home/us/en/19/product-support/product/dimension-E521/drivers

  Its most likely the Windows 7 installation media will have the class drivers appropriate for at least your Broadcom, which you can use to connect to the Internet and update via Windows Update.

  Still download important factors in advance to have at least a working system:

  Which architecture of Windows 7 are install you, 32 bit or 64 bit?

  Broadcom 440 x 10 100 embedded controller v4.60.0.1 (bcm4sbxp.sys) digitally signed by Microsoft, I think that the previous clean install of Windows 7 at retail.

  http://downloads.Dell.com/Network/R150593.exe

  1.a. I copied from my Dell Windows 7 PC existing (bcm4sbxp.sys) to my network.

  1.b.  Dell offers no support for this model using Windows 7.

  1.c. downloaded from Broadcom 4401 for XP Vista & as: bcm4sbxp.sys, b44win.inf, b44win.cat; that seems to be what I use for Windows 7, but these files are not executable (s) then how would a re-install?

  2 gateway 9310 S (Marvell 88E8050 PCI-E ASF Gigabit Ethernet Controller Yuknon {which seems to be signed by Microsoft of the previous clean install of windows 7})

  2.a. Bridge existing as yk62x86.dll & yk62x86.sys PC

  2.b.  Downloaded from Marvell under Win7 Server 2008-R2 32-bit - 11.45.4.3.zip.

  2.c. Zip includes; yk62x86.sys, yk62x86.inf, yk62x86.cat; that seems to be what I currently have for Windows 7, but none of the files are executable, so, how would I install the driver?

  (3 acer Aspire M5100 (Marvell Yukon 8858056 PCI-E Gigabit Ethernet {which seems to be signed by Microsoft of the previous clean install of windows 7}))

  3.a. On Acer PC existing as yk62x86.dll & yk62x86.sys (same as walkway above)

  1. downloaded from Marvell under Win7 Server 2008-R2 32-bit - 11.45.4.3.zip.

  Even download accurate to Marvell for Acer and Gateway

  If it's too hard, no problem, appreciate the help so far.

• With the help of VWmare on my Windows 10 machine & I need an OEM Windows 7 Ultima Pro 64 bits for Xilinx Vicado to run

  I am development engineer and my material design of Xilinx Vicado package will not work in the new Windows 10. I said that he can not find running libraries etc.. They use batch to determine if the directories exist etc. Well, I've spent big buck to get the latest version of VMware. I install my OEM of Windows 7 Ultra Pro 64 bit version and install the key software must work. So after you have installed, the activation of my key does not work. I made several suggestions, but it is not supported anymore. Yes big problem so it is not supported, I understand that I watch the news and reading materials. I use Microsoft products since the first Windows 286 and spent a lot of money using your products. So Microsoft is going to fuck me a disable us marine veteran? After paying my bills every month I $168 to feed my son and myself. I may as well cancel all subscriptions and eat food, but I'm 65 years old and that I have to keep my mind active but a brain injury, broken back and I might as well jump off a cliff, but I love my child and myself. So tell me how are you going to fuck me.

  James Wm Hussey

  E-mail address is removed from the privacy *.

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=W10 '

  Hope this information is useful.

• Validity Sensor does not not in dv7t - 6 c 00 CTO Quad Edition using Windows 8.1 Pro 64-Bit

  Hello

  I have a Pavilion dv7 (dv7t - 6 c 00) CTO Quad Edition (product # A1L77AV) I can't get the validity fingerprint sensor to work after installing Windows 8.1 Pro 64-Bit from scratch.

  Windows 8 drivers that are available for this model do not seem to work. Other drivers Windows 8.1 available in the HP site do not seem to work either.

  The unit shows in the management of the computer as a work, I guess by using a Microsoft Driver. The Unit presents itself as "validity sensors (WBF) (PID = 0018)' in the biometric devices topic."

  Any help will be appreciated.

  Thank you

  Hello SauveDuro, welcome to the Forums of HP.

  I see you are trying to install the drivers for the fingerprint reader on the laptop for Windows 8.1, you've seen questions get this working.

  Unfortunately, HP does not drivers for Windows 8.1 for your laptop.

  The most I can recommend in this case, check the manufacture of each component for Windows 8.1-compatible drivers.  Here's a link of validity, you may be able to get drivers that work for him: http://www.validityinc.com/software/hp/wbf.php.

  This can also help you to: Troubleshooting a (Windows 8) fingerprint reader.

  Sorry for the inconvenience that this may cause. I hope that something can help you.
  Thanks for posting on the HP Forums.

• Driver for Laser Jet P1005 for Windows 8.1 Pro 64-bit

  Hello. Desperately looking for Laser Jet P1005 for Windows 8.1 Pro 64 bit drivers. Is it still out there? Can if so someone you please provide a link? Thank you.

  Hi @Evanescenc3,.

  I see by your post that you are looking for 64-bit Windows 8.1 for the Laserjet P1005 drivers. I can help you with this.

  Here's the URL to the printer drivers. Base driver HP LaserJet P1000 P1500 Hostbased Plug-and-Play.

  You can also select the tab for the installation. It provides the steps for installation.

  If you need help, let me know.

  Good day!
  Thank you.

• Pavilion 14-ab133tx: need driver for windows 8.1 pro 64-bit

  PLS, I want to downgrade to windows 8.1 pro 64-bit

  Can send the link to download the drivers? Thank you

  Hi, @Martinuss :

  You should be able to use all the W8.1 drivers and software (except the BIOS and firmware files) of the 14 t-ab000.

  http://support.HP.com/my-en/drivers/selfservice/HP-Pavilion-14-ab000-notebook-PC-series/7771364/model/8341282

  For graphics, use the latest Intel driver listed and graphics drivers from nvidia.

• HP ProBook 450 G2: HP ProBook 450 G2 Wi - Fi adapter problem Windows 8.1 pro 32 bit

  I did a clean install of Windows 8.1 pro on the laptop. Everything is functional and installed outside the Wi - Fi adapter.

  I tried the drivers available on the HP website for laptop specific downloads section, however there is no registration for Windows 8.1 pro 32-bit. most of the drivers available in section 8.1 of the 64-bit pro is compatible, however the network card is still not recognized and I can't use the Wi - Fi

  In the device manager network controller has an exclamation mark next to it. Here is a screenshot of the hardware ID

  Any help would be most appreciated.

  

  Hello:

  I would just use the drivers wireless and bluetooth directly from Intel...

  Wireless: 1 pilot on the left.

  https://Downloadcenter.Intel.com/download/25834/Intel-PROSet-Wireless-software-for-Windows-8-1-?product=75442

  Bluetooth: 1 pilot on the left.

  https://Downloadcenter.Intel.com/download/25839/Intel-PROSet-Wireless-software-for-Bluetooth-technology-for-Windows-8-1-?product=75442

• I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure?

  * Original title: upgrade

  I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure? I see that Windows 7 or 8, a free update to Windows 10 is offered. Should I buy 7 or 8 then you spend 10 or just buy 10?

  Thank you

  Jim

  Hello

  Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

  There is no free upgrade Vista to 7, 8.1, or 10.

  Follow these steps before you buy Windows 7.

  Microsoft sells more than 7; Try Amazon.com.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@

  Follow these steps before buy you and upgrade (new installation) of Windows 8.1.

  Microsoft sells more than 8/8.1.

  Try Amazon.com, etc.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  "Update to Windows 8.1: FAQ".

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@

  How to buy Windows 10:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• Windows 8 pro and windows 8.1 pro 64 bit drivers ralink rt3290 and lan realtek PCIe FE Family Controller

  Hello

  I have a HP Pavilion GP A10 AMD laptop 2313-AX. The latest drivers from the HP website for windows 8 pro and windows 8.1 pro 64-bit drivers ralink rt3290 and lan realtek PCIe FE Family Controller appear limited in my laptop, but in the same laptop connectivity when I start in Windows Server 2008 R2, both LAN and wifi works very well.

  Are there drivers available updated 2013 for these two hardware devices as dated?

  Are there universal or generic drivers that can act as a workaround?

  If so, please give me the URL for the same thing.

  Kind regards
  Sriram.

  Hi Steve,.

  I came across similar issues where the driver manually enabled users to solve the problem. Uninstall the current network adapter drivers and manually install drivers that you previously downloaded.

  a. press Windows key + R key, type devmgmt.msc, hit the Enter key to open the Device Manager.

  b. expand network adapters, right-click on the listed network adapter and select Update driver software.

  c. click Browse my computer for driver software, click Let me pick from a list of drivers for devices on my computerand then click on disk.

  d. in the dialog box to install from the disc, click Browse, locate the drivers, and then click Open.

  e. follow the steps described in the DeviceName update driver software dialog box to update the driver.

  Try these steps and let us know the results.

• Sony Vaio VPCEG25EN Driver for Windows 8.1 pro 64-bit

  Hello people, in fact I had installed windows 8.1 in my laptop Sony Vaio E VPCEG25EN series and now I am facing a problem. There is no graphics driver provided in the download page for the driver for windows 8.1 pro 64-bit. So please guide me to get the graphics and all drivers vaio accessories as vaio gate is not available. So please guide me as soon as Possible... Thank you very much in advance.

  Hi kunalkakkad,

  For further assistance about your concern, please contact nearest your place of residence Sony offices/Sony representative offices in the Asia-Pacific region due to the proximity, they are in a better position to respond to your questions or concerns.

• Cannot install VMware Workstation on Windows 8.1 Pro 64 bit 11.1.1 - Please help

  You want to install VMware Workstation 11.1.1 on new 8.1 Windows Pro 64-bit PC.

  I had VMware Workstation 11.1.0, and deleted the original installer but did not finish the installation of the new version

  The installer gets about 2/3 way (progress bar) and then crashes, Windows Installer says Event Viewer hung.

  Race tried without firewall and AV, always not install question

  A ran the installer with / clean option and then tried again, but still he did not finish the installation process (crashes at the same place)

  Noticed in the Manager tasks that VMware Installer runs at about 14% of CPU, but nothing happens

  I'm really at a loss as to why I can't install VMware Workstation 11.1.1, all the other soft\ware settles very well.

  Please could someone help me?

  Thank you

  Peter

  Ran Windows Update Troubleshooter

  It fixed a number of things

  I could then install VMware Workstation

  No idea but why the installer got himself in this State

• USB 3.0 for Windows 7.0 Pro 32-bit driver

  Hello

  I recently bought a HP Pavilion 500 - 020L (H5Y82AA #UUF). I install Windows Professional 7.0 (32-bit) ON this PC.

  I was not able to find the Windows 7 driver for 2 Ports USB 3.0, because the HP site have Windows 8 drivers.

  Can someone please help?

  Thank you.

  Lau Kok Chiang

  Hello:

  Here is the link for USB 3.0 driver your PC if necessary;

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-112308-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5197679 & sw_lang =

• How can I customize the appearance on windows in WIN7 pro 64 bit

  In Win XP & Win 98 we could click right on the desktop select properties and refine set all the appearances of soundcards how can we do this with windows 7? specofically I want to expand the police and get rid of the white back ground on windows Explorer as it runs the pain of my eyes.

  See this tutorial

  http://www.sevenforums.com/tutorials/282-window-color-appearance-change.html?filter [2] = appearance Customize

• Corrupt SPDLR. SYS in Windows 8.1 Pro 64-bit

  When the system hung up, I was installing a silverlight plug-in. After the reboot of the machine, I learned that he had become corrupt. Try to run the routine repair was useless - I just received a message that Windows could not make repairs. I suspect problems with the system disk and started the prompt using the installation DVD. It turns out that drive C is available as drive E. I ran bootrec who reported that some errors were repaired, but that it could not fix everything. So I ran sfc in offline mode. In the srttrail.txt log file, I see that SPDLR. SYS is corrupt and attempt to repair failed (error 0 x 2 and 0 x 490 code). What should I do now?

  Kind regards

  Morten Ericson, Norway

  Hello Morten,

  Thank you for the update.

  As the system has been configured in RAID and a complex issue, I recommend posting this query in the TechNet forums so our specialists can help you better.

  TechNet Forum

  Thank you.

• HP Pavilion Slimline s3760in D: need help in Clean install Windows 10 pro 64-bit?

  Hello

  For the past few months I am running windows 10 pro where I had to upgrade windows 8.1 pro 32 - bit windows 10 pro 32-bit. If my system is activated in windows 10 pro and it is authentic.

  

  When I checked in the type of system, it says operating system 32-bit, x 64 processor.  4 GB RAM only 3.12 GB of RAM is usable.

  This means that my processor supports 64-bit operating system. That's why I intend to clean windows install 10 pro and install the 64-bit version so that I can use all 4 GB of RAM.

  That's why went into a tool for creating media and downloaded Mediacreation Toolx64 but when I try to launch the app it shows error "this app cant run on your pc. But Mediacreation tool for 32 bit gently. According to me, given that my current OS is 32-bit so mediacreation toolx64 is not running.

  So I was wondering if I run 32-bit tool mediacreation and choose 'create multimedia installation for another pc' and chosen architecture (32-bit and 64-bit) times, then the clean installation of windows pro 10 OS will I have the option to choose between the version 64-bit and 32-bit version?

  [2] already my windows 10 pro is active in 32-bit version, I get a product key error when I clean install 10 pro for the 64 bit version of windows?

  [3] will be my windows 10 64-bit pro is activated? Since my windows 10 pro turned in a 32-bit version.

  Microsoft memo said "Your PC will activate online automatically as long as the same edition of Windows 10 has been activated successfully on this PC using the free Windows 10 upgrade offer."

  HI Varadar,

  You're right, you choose the installation program of the media creation tool that corresponds to your current system, but create a support for another PC and select 64-bit or both.  I would choose 64-bit.

  Yes, what you plan should work.  Once you have upgraded to Windows 10 32 - bit and Windows checked 10 32 - bit is set, you can use Media Setup to switch to Windows 10 64 - bit.  But... I could ask you to wait a month.  It was reported on the sites a Updatefor Windows 10 is expected in November.  This update will include some changes and corrections that we have already published to our group of insiders test.  The recent blog post is hereand scroll to the bottom of reading on the Activation stuff.  We also wrote about the changes, including the news of your task in our own forum.

  What do you think should work now today, if there is no problem or bug there is no backup.  But if you wait a bit, then the backup as explained will use your Windows 8.1 Pro key into your HP motherboard.

  I hope this helps,

  Charles