Windows 7 pro "updated" crashes when you exit on vmware 4.1

Similar Questions

• When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions.

  When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions. What now? Thank you

  Hello

  Disconnect all external devices from the computer and try to restart the computer and check what is happening.

   

  Step 1:

  Try to boot to the desktop in safe mode and check what is happening. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Flash 11.8 beta crashes when you exit the full screen

  Flash 11.8 beta plugin crashes when you exit the full screen.

  * The crash of the plugin that brings in ComodoDragon 26.2.2.0 and Firefox21.0

  * The accident occurs in Flash 11.8 beta only

  * Flash Player 11.7.700.202 not crushed.

  * The accident happens on Wndows7x64 and WndowsXPx32 as well

  Steps to reproduce:

  1. install the Flash Player 11.8.800.50

  2. run ComodoDragon 26.2.2.0 or Firefox21.0

  3 open http://www.youtube.com/watch?v=55s3T7VRQSc

  4. click on the icon at the bottom right of the video fullscreen

  -observe the Flash video becomes fullscreen mode

  5. press ESC to exit full screen

  -observe the Flash pluin crashes

  Actual results:

  The Flash plugin crashes

  Expected results:

  The Flash plugin should not fall down.

  The video should play continue.

  Hi, it is already known.

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=869838 = adbe 3556886

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=772097 = adbe 3550712

• First Pro CC crash when you drag the project window media

  I had so many problems with the CC (2014) since the 8.1 update. The last problem is interacting with the media in the project window. In any version of PP (7, 8.0.1, 8.1), when I try to drag the media from the project to the timeline window, I get the crash 'first Pro CC met a serious error... ". ». I use a Macbook Pro i7, 16 GB of ram, Nvidia GT graphic map of 750 m, on OSX Yosemite. I tried to clear the cache of media and the parameters of compensation at the start with alt + shift. I've been using 8.0.1 due to previous problems with ui serious lag on 8.1. I had more problems with the PP in the last 3 months than in the previous 7 years, I have used.

  Hi Bryan,.

  You have the extension installed "Pushbullet" Chrome? If so, you and Baemon should try to remove and then see if the problem goes away. He worked for others: Re: Premiere Pro CS6 crashes when drag-and -

  Thank you
  Kevin

• Window and the mouse crashes when you try to close the windows

  Original title: window crashes when you click on the red X

  I use Windows Vista Home Premium (64-bit platform).  Just recently, when I right click on the red X in the upper right to close a window, the window and the cursor freezing for about fifteen seconds.  The window then closes, and the slider works normally.

  This happens to my office, although my laptop (same operating system Vista, except for the 32-bit version) works normally.  I use CCleaner on a regular basis, and I have the latest version of AVG anti-virus and Microsoft Security Essentials installed.  This Setup has worked well for over a year.  This problem appeared only in the last 24 hours.

  Gordon

  Houston, Texas

  Hello, Mr. the President Y. K..

  First, as soon as the computer and then restarting it later in the day, the question has not repeated itself.  I had read on Google that people with this problem a couple of years, were not so lucky.

  I have not addded any software, except to perform Windows updates usual a week ago.  The suddenness of the appearance of my problem led me to believe that these patches were probably not at fault.  When I went to log on to this second time, I had planned to restore the system to a previous backup to see if that gave me work around the problem.  However, it was not necessary.

  No error message appears when the problem occurred, and the problem was if I was in the office or on the Internet.  Nevertheless, I intend to register your comments useful diagnosis for later use, and for your efforts, thank you very much!

  Kind regards

  Gordon

• LabVIEW application crashes when you exit a VI with one or several clients on remote control

  Hi all

  This is the question that I met with LabVIEW 8.2 and LabVIEW 8.6. I publish one of the screws dynamically launch my application as a Web page. Then I load the application and launch this dynamic VI and connect to this VI by using a web browser from a PC intranet. Then if I try to exit from VI when the client is still connected to it, the application crashes. Please see the attached picture.
  This behavior occurs randomly. Sometimes, everything works as expected when you exit the VI - the main screen of the application appears and in the client side, there is a "remote connection Panel is closed.
  What could be the reason for this?

  Thank you
  Luxama

  Oops... The method of 'Close links' to work correctly. I apologize for the error.

  Regarding the issue of application crash, I did this close relationship, then wait a few milliseconds and then quit the VI. Today, the application seems to work very well.

  In the meantime, I had another doubt. Is there a way to link to the application instead of a VI?

  Thank you
  Luxama

• First Pro CC crashes when you use jpg images in the timeline. Any help?

  My CC PP (on Mac) crashes when you use jpg (large) images in an HD timeline. PP gives me this way in an error message: [/ sirreact64/releases/2013.03/shared/adobe/MediaCore/Backend/Make/Mac/... /.. / Src/video/Vid eoPreviewCache.cpp - 75]

  But it's not the worst. This accident of the project folder destrys and I can't open it again, so all the work is lost. Also backup files will not open. Someone knows how to fix this?

  I'm working on a 1/2 hour documentary and I am not satisfied with the PP CC now!

  Thanks for the tip, findingmyself.

  I would also advise people to resize pictures and graphs to not more than twice the size of the frame they have for their sequence settings be on the right side and for better performance. Bigger than that you are having problems.

  Thank you

  Kevin

• Windows Update crashes when you try to download updates. (2 different BIT errors)

  Windows 7 Pro 64 bit. AVG free.

  When I press "install updates" in the windows update window, it says downloading updates... 0 percent and it freezes.

  After a long time, itll fail and give me code error 80246008. I did what was said on this site, and it still doesn't work. http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

  I don't know if because it is not windows 7 specific, that i should even have to do that. The problem is that whenever I start CUTS in services, itll give me the error:

  "Windows didn't start the Service on the Local computer's Background Intelligent Transfer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service-specific error code - 2147024891. »

  In the event viewer, I have 2 errors. The first said "the BITS service was able to start. 2nd one that follows, error 0 x 80070005. ' said ' the Background Intelligent Transfer service completed with the specific service error %-2147024891.. »

  Anyone have any ideas?

  Thank you!

  Thanks Kim, but could you be more specific about where the path of % ALLUSERSPROFILE might actually be on a standard installation of C:?

  I don't think that this folder exists nowhere in C:/users, including hidden files. Would be - it different in Windows 7?

  EDIT: Thanks for the help guys, I decided just to format, because that would be a guaranteed solution and everything seems to be working again now.

• Premiere Pro sometimes crashes when you open a file Explorer window

  Hello

  I've had this problem for a while now but have never been able to find a solution. Basically if I use something within Premiere Pro that opens a Windows Explorer dialog box (for example, when you choose a custom LUT), the program sometimes goes a little crazy.

  The dialog boxes is not pop up and the program becomes unclickable. And when you try to click on what, whether it gives it its particular of Windows. That occurs when you use a program and a dialog box has popped up and you try to click outside the dialog box.

  In the past, if I tried to end task and then cancelled, the program will open. However, with the last update things became different. It unlock again, but the program does funny things as it won't save. It does not update the video window when you rub. Etc., basically it becomes unusable and you will need to complete the task without being able to save your work.

  All Adobe autour staff member?

  Hi Inazuma,

  Rarely. This is a user to user forum, mainly. Contact 'Adobe' here.

  Thank you

  Kevin

• Windows 7 explorer.exe crashes when you go to properties.

  Hello, I have a windows 7 Ultimate x 64. I was working on my PC after using Windows Update, and when I go to check the properties of 'Computer', it crashes. I tried rollbacking that updates, but that has not worked, and the system restore is irrelevant. Also, now I have to pay almost all of the programs to run in "Windows 7", on a Windows 7 compatibility mode! Is it a mistake to register when you enter the properties of the computer? Please help since my error is specific.

  I managed to fix it.

  Those who have the problem, try turning off graphics driver via Device Manager and go to the properties of the computer, if I'm right, it should not give the error explorer.exe. If so, I recommend that you have installed the previous version of the driver for the card.

  And auggy, I erase the DLL, they did not affect the operating system. Thanks for your help.

• Premiere Pro CS6 crashes when you drag

  Trying to change in PP CS6 and get this error whenever I drag the files.

  «I'm sorry, that a serious error has occurred which requires Adobe Premiere Pro stop.» We will try to save your current project".

  
  

  This happens everytime I try to drag images. Apart from files or sites.

  I'm working (at least trying) on a Mac Pro (mid-2012) running OS X Yosemite 10.10.1.

  Processor- 3.2 GHz Quad-Core Intel Xeon

  Memory- 16 GB 1066 MHz DDR3 ECC

  Graphics- ATI Radeon HD 5770 1024 MB

  Says Adobe Application Manager everything is up-to-date and I've tried everything I can think of.

  Restart the computer.

  Tests of various video files in the project (which happens with all)

  Moving the files to another drive

  Create a new project on another drive

  Old project with images that have worked before.

  No luck with anything.  Any help is greatly appreciated! I have deadlines to meet and no backup computer!

  UPDATE!

  I also lived down in Illustrator. I found my way to this subject and discovered that my problem is a Chrome extension called Pushbullet. After the suppression of Pushbullet of Chrome and restarted my computer, I was able to drag clips into my script again. If you use Pushbullet or perhaps another ill run Chrome extension, chances are, that could very well be the source of your problem!

  Illustrator crashes when I try to move an object with the Selection tool

• Flash Pro CC crash when you use the pencil, Brush tool

  Hello

  I bought the full package of CC and installed Flash Pro CC today on my laptop (lenovo y50) and im getting crashes when I use pencil and Brush tool.

  When I use the selection tool the selection is not in the right place. program feels weird.

  IM using latest version

  running windows 8.1

  lastest flash and air and graphics drivers.

  IT hangs just does not show even a mistake just benggg has stopped working.

  Can someone help me?

  Greatzz

  solved

  I was having the same problem and found the solution from Adobe.

  Go to the Control Panel - hardware and audio - display-

  change the size of the text for the smallest a 100%

  Restart the OS and start adobe flash

  I hope this will help you

• Safari 9.0.2 on Yosemite crashes when you exit

  When you leave Safari 9.0.2 on Yosemite 10.10.5 seems stuck.

  Turning beachball and no reaction. Have to force quit again and again.

  Already disabled cash all the extension, cleared and cookies...

  Someone has an idea? Thanks in advance!

  Corruption Safari       See post by Linc Davis

• Windows Update crashes when you try to install an update.

  Running Windows Vista Home-system hangs at the screen that says: do not unplug or turn off your computer - installation of update 1 of 1.  Has been hung for 2 hours on this same screen.  Update is currently set to automatically install updates.  Should have started last night.  Cannot use the computer without defying the screen that says do not unplug or power off the computer.   What should I do?

  Here are two methods you can try: method 1: start with the Windows installation disc and use the repair feature method 2: start the computer in safe mode and then use the system restore feature

  Source: http://support.microsoft.com/kb/949358

  FOR INFO:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  TaurArian [MVP] 2005-2011 - Update Services

• Windows XP SP3 system crashes when you unplug the USB device

  the user has a laptop Dell Latitude D630 under Windows XP SP3.  In the last 2 weeks, the laptop started to hang when it unplug a USB device.  Click on the system tray icon to remove the device but the system gives breaks down.  That's all the info I have at this point.  What should I look for?  Does anyone have ideas on how to solve?  Thank you.

  How to crash the system?

  What is a blue screen crash?

  If so, it can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.