Windows 7 Recovery Manager no start the thread

Similar Questions

• I need Recovery Manager or start the recovery within Windows

  Stupid boring history:

  I work in a local store of pawn and we also miss a place ebay store. Some people are not the brightest.

  We have a HP Pavilion A6400Z that origionally came with Vista Home Basic.

  Apparently at some point they thought it was too slow, so they took an acer recovery disk and put XP on there. There is no drivers / whatnot.

  I put vista Home premium on there to see how he could play, and it works well. The recovery partition is surprisingly intact, with all of the HP Preload files there.

  What I do:

  Only I have a disk of vista Home premium and want to the factory restore using the recovery partition that is always there.

  Pressing F11 at startup is not in recovery mode, I need to get the software HP Recovery Manager, or find a file on the partition recovery that will do it for me.

  Thank you in advance!

  By pressing F11 on HP Invent blue screen, as soon as it presents, should start the Recovery Manager.  If it isn't, there are two other ways to get it started.

  (1) try to start in Safe Mode, tapping F8 (not now) after the blue HP screen.  Then go on the recovery partition and mark it as active in the "disk management", then restart.  Back in safe mode, and it must ask that the installation of Windows you want.  If it does not order them HERErecovery Kit.  You can see several items that apply but do not require the "Vista Business". 5092-7398 or 5092-7399 should work.

• When you try to connect to a wireless network I get this error: "If you want Windows to configure this connection, start the Wireless Zero Configuration service.

  original title: WiFi

  I want to connect to a wireless network on my laptop. When I go to the page of networks wirelss under the "choose a wireless network" it says "Windows cannot configure this wireless connection. If you want Windows to configure this connection, start the automatic Wireless Configuration service. My other laptop does not, and I don't know how to make the wireless network options appear. Any help is appreciated!

  Hi AshleyHenley,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  See the article and run the Fixit tool available, check if it helps.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• Windows Explorer opens whenever I start the PC

  Hello

  I bought my lenovo laptop u410 a few days ago and yesterday the office system map begins suddenly after I booted up.
  How can I stop this? I searched the internet, but none of these solutions work.
  I looked at my card to start, but it is empty. Also, I looked in the registry editor, but unfortunately no luck.
  Can someone help me please? Thank you!
  Original title: desktop card system suddenly starts up?

  Your problem is

  Windows Explorer opens whenever I start the PC

  - - - -

  I suggest that you change the question - just click on the Edit link, you can see right under him [almost where I would be selecting the link address instead].

  - - - - - -

  Also, check these settings: -.

  1 in Windows explorer, Union, file & search options, see tab, [down] restore file when connecting windows - make sure that is not selected.

  2 click the Start button, the cursor on the entry for all programs, right click, select Open, double-click programs, double-click Startup - check that you don't have a Windows Explorer shortcut it.

  3 click the Start button, hover over the entrance for all programs, right-click, select open all users, double-click programs, double-click Startup - check that you don't have a Windows Explorer shortcut it.

• After starting Windows Vista Recovery dvd 64-bit, the files are loaded on my laptop, however after the loading screen are replaced by a black screen and the white slider.

  Hi all

  I have my laptop startup problems, and after you use the Windows Vista Recovery dvd(64 bit), I get a black screen with a white cursor. If I try to start the system in safe mode, I get an error message "windows/system32/ntoskrnl.exe is missing or damaged. Because I can't run the recovery dvd, I'm a bit stuck. Any suggestions?

  Evan

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Unable to connect to networks wireless on laptop Windows 7 Enterprise. Cannot start the autoconfiguration WLAN service. "Error 1068: the dependency service or group could start."

  original title: cannot start service autoconfiguration WLAN and EAP services

  I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."

  I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.

  I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.

  When I tried to start the WLAN auto configuration service, I get the following error...
       Windows could not start the service WLAN autoconfiguration on Local computer.
       Error 1068: The dependency service or group could start.

  When I tried to start the service of Extensible Authentication Protocol, I get this error...
       Windows could not start the service on Local computer Extensible Authentication Protocol.
       Error 1053: The service did not demand launch or timely control.

  I found that all dependent services for the EAP are running. And all dependent services for autoconfiguration WLAN service are running except the EAP service.

  I searched the internet for the solution madly before posting here. Any help is greatly appreciated!

  Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921

  This link has the solution that worked for me.

• By using the Recovery Manager to repartition the HARD drive

  I started a post a few days back on my pavilion DM1-3014AU netbook that runs on AMD APU-E350, 2 GB of ram and comes pre loaded with windows 7 Home Basic. I had a number of requests because I want to repartition the hard drive, do a fresh install of windows 7 my disc and I also want to keep some of the hp software.

  After going through a few messages in this forum, I learned that we can use the Recovery Manager to do a minimal install, IE windows 7 and only the hp software. That's what I have to do unless I also want to repartition the hard drive.

  I currently have 4 partitions, C drive, hp tools (hidden) and backup (hidden). I have already created recovery disks. Now, my questions are:-

  1. can I use recovery disks or Recovery Manager to delete all existing partitions and recreate my own partitions. This means that I would remove the recovery, tools and backup partitions.

  2. After doing the above I'll be able to do a minimal install (os + hp software) via the Recovery Manager or the recovery disks.

  3. my intutions are that I can accomplish the above two using the recovery disks and not the recovery partition. If the above two steps are possible using recovery discs, it would ultimately have no partition on my hard drive recovery. I will then be able to use the recovery disks in the future to make the same minimum install (os + hp software)

  4. I wouldn't really keep the recovery, tools and backup partitions if they can be of any complacency in the future but the reson why I want to delete them, is that windows 7 Home Basic allows no more than 4 partitions and I want to be able to create at least 4 partitions for my use.

  Any help would be really appreciated...

  Yes Vikrant... it is unnecessary to install UEFI to update BIOS.

  Yes, if you install the update to the BIOS using the link I provided in my previous thead element, you can as a revert to a version of BIOS as soon as possible if you feel that the system is unstable.

  Even if you reparition the whole HARD disk and do a manimized install, you can install the BIOS update in the future.

  Updating the BIOS is independent if you did full recovery or minimizes recovery.

  BIOS update will not affect the use of recovery disks and procedures. You can safely use them in the future without any problem.

  You will use the ability to run F9 diagnostics incase of any software system crash, and you are unable to start Windows.

• Has anyone managed to start the Switch 10 from a USB?

  I have only the option of widows Boot battery and usb is not listed as an option.

  Thank you.

  Thanks for the replies.  I tried several times to get the Switch 10 to show me the options to start without success.

  Here is my procedure: I use the laptop settings to enter recovery.  I choose the option restart.  I chose to change the settings for uefi.  I disable secure boot.  I have enable f12.  Once the machine restarts, only the windows startup option is available.

  What I am doing wrong? I can't get the machine to boot from a usb key.  It's a little disturbing, given that I created a usb backup by using the backup utility Acer.

  I have a drive ready to go with 10 windows on it, after using Rufus.  Would love to load and preview Windows 10.

  Thanks for any light you can contribute on it.

• Windows 8 Recovery Manager download

  Hi, I need to download the recovery for windows Manager 8 Please, my laptop is the

  HP TouchSmart 15-b130ea

  I had to replace the HARD drive and install windows 8, since that I have now managed to unravel the HARD disk original and found the recovery partition is still intact with all the files needed to do a full factory restore unfortunately I canoe this

  unless I can download the ROM for windows 8 Please?

  Sincere greetings

  Martin

  The HP Recovery Manager is not a downloadable product. It comes with all new Windows laptops and hard disk with a recovery media creator. The owner of the laptop is applied during the installation, if he or she is ready to create a recovery media. It seems that you forgot to do so.   The following method has been available from Windows or F11 (at startup) unless Windows has been corrupted or the recovery partition has been moved or deleted.

  

  

  

  The operating system is still bootable from the original HARD drive?

  If it is then you temporarily reinstall, Windows and create recovery media usb by using the HP Recovery Media creator. Otherwise, you will need to order and purchase HP recovery media.

  You place your order of recovery media for Europe, Middle East and Africa regions

  http://h10010.www1.HP.com/ewfrf/wc/document?CC=NL&LC=NL&DLC=NL&DocName=bph07143

  Is your sleekbook still within its warranty period?

  Check the status of your warranty here.

• Start the UCM 11 g and IBR on Windows Server 2008 when you start the server

  Hello
  
  I installed ucm 11g with an inbound refinery on a 64-bit windows server 2008. The AAU and the bovine infectious rhinotraecheitis are supposed to start automatically after the server is running.
  
  1. I put the startWeblogic.cmd and the startNodeManager.cmd in the directory Autostartup. The weblogic and the nodemanager are starting very well in a denial of service console.
  2. I tried to start the University Complutense of Madrid with the following startManagedWeblogic of the UCM_Server1 command. Then he asks me a username and password and then, he throws a java exception and the UCM_Server1 will not be started.
  
  The current situation is that the weblogic and nodemanager starts automatically and the UCM_Server1 and IBR_Server1 must be started manually.
  
  What is the usual way to start the AAU automatically? Can we establish some Windows Services?
  
  Greetings
  Brahim

  The best way is probably a Windows Service. Here's the Oracle documentation on how to do it.
  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103/server_start/WinService.html

  You can also try the Windows Task Scheduler. I heard that this works well (even if a Windows Service would be better).
  http://www.windowsnetworking.com/articles_tutorials/working-Windows-Server-2008-Task-Scheduler-part1.html

  This post shows how to store your WebLogic login information encrypted on the disk.
  http://corecontentonly.com/2010/07/27/start-WebLogic-managed-server-without-username-and-password/

  Jonathan
  http://www.corecontentonly.com

• Windows xp: services do not start the access denied error 5 or error 1068

  Original title: windows xp: service does not start

  win xp: none of my important services like firewall, DHCP or the server does not start.  Everyone says error 5 access denied or error 1068 could not start dependencies... Please help

  Hello

  1. do you have security software installed on the computer?

  Try the methods provided below and check if the problem persists.

  Method 1:

  I suggest that you disable the security software and then try to start the service and check if the problem persists.

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  You will also need to start long-term services and check if that helps.

  To view service dependencies, click the link below.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/srvdep_view_service_dependencies.mspx?mfr=true

  Method 3:

  Check if the computer isn't on selective startup.

  How to configure Windows to use a Normal startup state

  Configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

   

• Windows resource protection could not start the repair service

  Hello

  I have a computer running Windows 7 with Office 2013 thereon. I forgot to remove the 2013 desktop in the control panel and the removal of FixIt. He suggested something wrong with the system. Then I run sfc/scannow, I got "couldn't windows resource protection start the repair service". The Windows Modules Installer service is started.

  Please tell us how to solve this problem.

  Thank you

  Hi Grace-

  Follow these steps to make a Windows 7 repair facility .

  It explains how to find the Windows 7 support for your version in step 1 of the clean reinstall Windows 7   If the repair facility does not help then I would follow the steps in the Installer Clean link to get and keep the best possible installation.

• Windows 7 - using VMware installation start the DHCP server

  Original title: Question

  When I try and install windows 7 using vmware its Dungeon rather start the DHCP server and then start from the selected ISO file I selected

  

  Hello Cordy,

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  In addition, you can also contact VMware support for assistance.

  See this link:
  http://www.VMware.com/in/support.html

  Thank you

• Smartphones from blackBerry Desktop Manager to start the laptop

  I installed Desktop Manager and is set to auto-start whenever I restart my laptop. How can I change to manually start menu programs?

  Hi and welcome to the forums!

  This should help you to manually start the DM.

  Thank you

  Bifocals

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB11920&sliceId=1&docTy...

• How can I configure windows update in order to start the procedure, when I connect to the school network?

  OT:help configuration of Windows Update.

  I use windows 8, now my problem is that I have to enter a user_name and password each time you start the browser, if you close the browser, or open another browser, you must enter user password again once you use a wifi or lab computers. Now when I connect to wifi, my browser instantly request name username-password but windows update is not so. I tried this a few times, only once named windows update displays dialong box asking username and password and it takes hours to do.

  How can I configure windows update already if start update already when I connect to the school network.

  Wifi authentication which traverse the browser means that you still need to open a browser and a connection that first, before any other programs can access the network.