Windows 7 - RunDLL

Similar Questions

• I am running xp Pro 64-bit and get entered C:\WINDOWS\system32\ rundll.exe error: FQ10 what to do?

  I followed the instructions to load the OS disk, type expand C:i386\rundll.ex_ C:\windows\system32\rundll.exe, etc., but the error continues to appear.

  Looks like you had a meeting with the FBI MoneyPack (Ransomware) malicious software.  Fact that all sounds familiar (FBI, your PC is locked, you need to pay your fine, etc.).

  You must first perform some scanners from reputable and do what they can do, but sometimes leave you with a fake startup item that you must manually remove using something like Autoruns.

  No matter what you use for protection against malware, perform the following analyses for malware, then correct any problems:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time):

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  They can be uninstalled later if you wish.

  The scans by operating clean, restart, and then fix any problems.

  If you still receive the message, delete the element of persistent starting using Autoruns.

  Here's how:

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.

• c:\\windows\system32\rundll.exe please help error message clueless me and computor's not workin right at all

  I have an error message on my desktop saying c:\\windows\system32\rundll.exe ive tried to download a tool to repair, but pc asking what program I want to open again theres none that can run it please help what I do

  Hello

  1. When you receive this error message exactly?

  Method 1:

  This problem occurs because of a missing or corrupted Rundll32.exe file.

  To resolve this issue, follow these steps:

  (a) put the CD ROM of Windows XP disc into the CD-ROM drive.

  (b) click Start and then click Run.

  (c) type expand X: \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.

  (d) restart the computer

  Method 2:

  This problem can also be caused by a virus.

  You can download and run a full scan of the system using the Microsoft Safety Scanner and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• error message: "WINDOWS\system32\rundll.exe is not found."

  WINDOWS\system32\rundll.exe cannot be found please check the root etc... etc... I've tried everything here.  How do I just uninstall WINDOWS and then reinstall it? I tried ALL of the suggestions I found here.  It is not in my Cache file, either this one's empty! Please help me.

  Click Start > run > type or paste c:\windows\servicepackfiles\i386 > Ok. Now, look in the folder for the file i386. If you cannot find the download from HERE and place it in c:\windows\system32.

• After download of Internet Explorer 8 I can't open all the icons in the control panel. On display is come information that Windows cannot find 'C\WINDOWS\system32\rundll.32.exe '.

  Dear Sir/Madam,

  Yesterday, I downloaded Microsoft Internet Explorer 8 web from Microsoft Download Center.

  After downloading Microsoft Internet Explorer 8, I can't open any icons in the control panel.

  On display is come information that Windows cannot find 'C\WINDOWS\system32\rundll.32.exe '.

  Help, please. Thanks Gene.

  Thanks Gene.

  Dear: :

  Running sfc/scannow will not replace the missing rundll32.exe file.

  Why you post methods that do not work and will be just wasting time?

  Hove you never even seen this problem before, tried to recreate it so that you can actually see, or have you never really fixed?

  Why you learn not what sfc/scannow does and does not do?

  Here is a simple test to you and all your colleagues in the technical support engineer:

  Rename or delete just your c:\windows\system32\rundll32.exe file is "missing".

  Rename rundll32.exe---> rundll32.xxx

  If you started normally, before you can blink, the 'missing' rundll32.exe file quickly and quietly replace the copy in the dllcache folder.  It is the Protection of Windows file in action and you will see something like this in the Event Viewer log system:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64002
  Description:
  File replacement was attempted on the protected system file c:\windows\system32\rundll32.exe. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5512.

  I beg you to perform this simple test to know how the sfc/scannow:

  Boot your system to Safe Mode or the recovery for the Windows File Protection Console does not run.

  For this example, we will use the system critical file rundll32.exe.

  Rename or delete your c:\windows\system32\rundll32.exe.exe file so the file is now "missing."

  A critical file, is it true?  It is on the list of the file 3498 knows the Protection of Windows and SFC files, but now he isn't.

  If Windows File Protection is running, the "missing" file would be quickly and silently replaced (try to rename or delete it in normal mode and it will be quickly and quietly replaced).

  Now, with your file rundll32.exe missing, start in Normal mode and try to use something like control panel to open something like Power Options and you'll see that familiar message:

  Control Panel
  Windows cannot find 'C:\WINDOWS\system32\rundll32.exe '.  Make sure you typed the name correctly and then try again. To search for a file, click the Start button, and then click search.

  Now you have recreated a common problem with the missing file and seen the error of our own eyes.  A Microsoft Support Engineer will usually suggest running sfc/scannow for this kind of problem, but it will not work or help and you can prove it to yourself, and now you have reproduced the error.

  You follow own advice and run sfc/scannow to the end.

  The rundll32.exe is always had disappeared, right?  Did run sfc/scannow replace the missing critical system file?

  How can he be so sfc/scannow is supposed to replace the missing system files?  This is because it is not this that sfc/scannow does.

  Now you know sfc/scannow does not.  He did not replace your missing system file (don't forget to put your rundll32.exe back so you will have a).

  Now, go to c:\windows\system32\dllcache and delete or rename the file rundll32.exe from there - and it will be gone and not replaced automatically because the Windows File Protection does not seem after this record.

  Run sfc/scannow in full again.

  Replace the file rundll32.exe missing in the dllcache folder, since it handles missing files (not the system32 folder) IS the folder that sfc/scannow.

  Now you know sfc/scannow does.

  Do you need help to know too much about the corrupt system files?

  Since most people do not have a genuine XP bootable installation CD, they will not be able to develop a copy of the file that is missing from the installation CD, they have not.

  After some directions on how to replace the file when the user has no XP bootable installation CD authentic and that will be useful to all.

  If you don't know how to say "I don't know how" and I'll help you.

  You want to inform/warn the poster that SP3 is installed that running sfc/scannow will take a long time for the installation of SP3 CD?

  If you do not have a CD with the same Service Pack as your installation (most people don't), the posters are in for a rough and frustrating time.

  Of course this will help with the detachment of the Ministry of Education of the impossible to try things that don't work, but I thought I'd throw it out there for the 100th time.

• How to add and remove programs via the control panel when access pops up an error of windows\system32\rundll.exe

  need to know how to fix the windows\system32\rundll32.exe to be able to go to add remove programs and other options in the Panel

  From the other thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/how-to-access-Add-and-remove-programs-through/852bd751-106C-481F-B471-9f32ddc40eab

  old question, new question so what I do or how to set or return rundll.exe in my computer?

  old question question/new - matter always request how to fix or recover from the windows/system32/rnudll.exe in computer science. I see no other answer to this anywhere

  Hi DadVQ,

  ·         Did you do changes on the computer before the show?

  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps mentioned in the article below and check if the problem still persists.

  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340

   

  Method 2: If the problem persists, I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• At the start of Windows 7 RunDLL error message

  Hello

  When I start my laptop I am getting following error message:

  RunDLL

  Problem beim Starten von
  C:\Users[user-name]\Music\iTunes\iTunes-name of my laptop-AppData-Roaming-shell32C.dll

  I'm afraid, maybe it's the virus. My antivirus program has found 2 viruses and stored.

  Thanks in advance for your comments!

  DayWalker cordially...

  Well, I use the freeware Anvira Antivir software + the avast! Free antivirus
  Both are installed and work great.

  We recommend that you install this to scan your system again.
  Also install the CCLeaner to clean the system and the registry.

• Computer kills Trojan horse erases the c:\windows\system32\rundll.exe for all applications.

  I asked a question on the internet about how to fix a leak in a washing machine.
  many Web sites came and I chose the one has "mr fixit" type anyone, among several, could offer advice for a fee. I logged to find out what it is and after reading the blogg decided not to go forward with it. It appeared to come from Australia, but infact it's America.
  As I have argued on the site of a link swung upward to invite me to "back to the main and clear site.
  What I've done and everything was okay, right there.
  A little later, I went to log on to another totally different site only to shown a pop = towards the top of window referring me to use a chosen program. weired thought that this has not happened before.
  A windows alert popped up to tell me that I have a problem of serious virus with at least 19 problems and 2 Trojans. My ' bitdefender cleaned one but not the other, and now my computer is dead.
  Please can someone tell what is my best option.

  I downloaded a copy of rundll32.exe on my SkyDrive (everyone has a SkyDrive).

  You can download it and when you do, put a copy or rundll32.exe in these files:

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to the file:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 307

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• Windows cannot find C:\WINDOWS\system32\rundll.exe. Make sure you typed the name correstly and then try again. To search for a file check the Start button and then click search.

  I tried to launch my Spysweeper and found that is not there, then I re downloaded and I could not install it because it was already on my computer.  I went to the control panel to remove and got the message:

  Windows cannot find C:\WINDOWS\system32\rundll32.exe.  Make sure you typed the name correctly and then try again.  To search for a file, select the Start button and then check the search...

  What should I do?

  Hi gsrow,

  You can go there!

  Cannot find the Rundll32.exe file when you open the control panel:
  http://support.Microsoft.com/kb/812340

  Alternatively, copy the folder C:\Windows\System32\DllCache Rundll32.exe file to the System32 folder. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Cannot run most of the programs in Control Panel because it says that I don't have \WINDOWS\system32\rundll.exe'. on my hard drive

  I recently installed sp3 on my computor he had sp2 now when I access panel, I can't run any programs like display or add or remove programs or internet con. I tried the system restore but it will not go forward or backward I always got the error this file \WIndows\system32\rundll32.exe'. is not on the hard drive that I can reistall sp 2 with sp3 hope somone can help thanks lindell wood

  If you have installed SP3 and now the file is missing, the opinion of the Support Engineer Microsoft won't help you unless you have a genuine XP installation CD also is Service Pack 3.

  That's extremely unlikely, unless you did it yourself and some people have never seen a real installation of XP bootable CD in their life then, how is this will help...  But, this is a link to a Microsoft KB article.

  When you try to open a control panel applet, you see a message like this:

  Control Panel
  Windows cannot find 'C:\WINDOWS\system32\rundll32.exe '.  Make sure you typed the name correctly and then try again.  To search for a file, click the Start button, and then click search.

  If the file is actually missing, it was probably quarantined (actually deleted) programmatically your antivirus or anti-malware not specified that you use.

  You might want to reconsider anything not stated antivirus or antimalware you programs use and whether or not they are effective to protect your system.

  You can look in the c:\windows\system32 folder and see if the file is actually missing or not, but you should replace it somehow.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called rundll32 when the name of the file should really be called rundll32.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• Windows cannot find C:\WINDOWS\system32\rundll.32.exe

  Windows cannot find C:\WINDOWS\system32\rundll32.exe

  This show upward in a box gray, whenever I go to control panel > add or remove programs.

  It also appears when I right-click on the screen with the desktop icons. He appears in the gray area after I click on properties.

  That's why I'm unable to use one of these. Cannot add or remove programs, or change the properties. I tried searching but the same answer.

  Hi cls3028,

  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.

  Try the steps listed in the link below: cannot find the Rundll32.exe file when you open the control panel:http://support.microsoft.com/kb/812340

  Also scan virus online to check if there is any malware or virus activity. See the link below:http://onecare.live.com/site/en-us/default.htm

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

  Original title: Windows Rundll error on startup

  My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

  What is a rundll error?

  File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

  Why do you Rundll errors?

  Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

  STEP 1: IDENTIFY

  The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

  STEP 2: STOP THE PROCESS

  Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
  1. open your Start menu.
  2. click on run
  3. in the command screen type:services.msc
  4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
  5.stop the "dll" service immediately.

  NOTE: sometimes the dll process can not be stopped by this method.

  

  STEP 3: CHECK FOR AND REMOVE

  You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  This action will help you speed up the considerable load time of your applications. Here's how:

  1. click on Start
  2. click on run
  3. type regedit
  4. find this registry key:
  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
  6. delete the value and reboot.

  

  SPECIAL REMARKS

  Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

  The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

  ======================

  More information is a lot to explain and resolve the problem.

  Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

  Because not only it solves problems, there will be new user settings and the program files needed for the user account.

  Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

  Here is the link.

  Run hitman pro 3.5

  http://www.SurfRight.nl/en/downloads

• the host process (Rundll 32) Windows

  Gentlemen:

  I get a pop up asking to install: windows host (Rundll 32) process, I don't know what it is and the weather, I should install it or NOT. ? ? ?

  Any help you can give me would be greatly appreciated.  Thankns

  Sincerely:

  cvillalvajr

  Hello cvillalvajr,

  This thread has been created in Windows Vista | Install, upgrade and activate forum; the Microsoft moderation team has moved this thread on the forums of performance and Maintenance.

• "windows host process RUNDLL 32 has stopped working" I ran the cleaning disc etc. without success. Help, please!

  Internet explore and Incredimail has stopped working after power failure with the following error message "windows WHAT RUNDLL 32 host process has stopped working. I ran the cleaning disc etc. without success. Help, please!

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Error loading C:\Windows\icodonokecikotad.dll

  On startup, I get a message window

  RUNDLL
  Error loading C:\Windows\icodonokecikotad.dll
  The specified module could not be found
  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.