Windows 7 runs slowly using Standard MS Project 10 with a Pool of resource/schedule Master 20 projects running. But XP works well?

Similar Questions

• I upgraded to firefox 3.6 recently 11, but firefox11 works well with my windows 7. It became slow and strucks on for 6 seconds for each click.

  11 Firefox hangs frequently for about 6 seconds for each click as switching between tabs, closing tabs, opening new tabs.
  by clicking a link etc,
  3.6.17 worked well, but 11 Firefox is too slow.
  problem is the same with version 4 and 4.01
  can someone please help me to solve my problem

  I'm sorry that you have problems with Firefox doesn't work is not as fast as it should. I'd like to help you here so that you manage Firefox running at great speed.

  Firefox, try to start Firefox in Safe Mode. It temporarily disables your extensions, customizations, etc. so that we can see if they slow down Firefox. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker. Once you do, you can disable this add-on.

  I also see you have advise McAfee Site. I would recommend disabling that, as it is known to cause leaks of massive memory than Firefox slow down

  If Safe Mode does not work, you can also try updating your graphics card driver. Update your graphics drivers to use hardware acceleration and WebGL reading can show you how to do this.

• Question about the use of sharing with several pools of resources

  The design of our environment vSphere has several pools of resources at the root, each series 'Normal' value stocks, and if the resources tab shows that each resource pool '% of the shares' value of 3%.

  However, some resource pools have 50 + VM and others have only 1 or 2.

  Is someone can confirm that this is wrong and that should have a pool of resources with more than VM have a proportionately higher value of action?  This assumes of course that all the resource pools are of same priority (be they makes me wonder why we use pools of resources at all... but that's another issue)

  The reason why I ask is that the 'worst deal allocation' is for memory and CPU is much higher on the pools of resources with multiple virtual machines, so it's obviously something in the algorithm of resource allocation that is aware of the total number of virtual machines in the pools. Resource pools are defined as extensible and I'm assuming that this "worst case allocation" would go down considerably as the cluster approached his ability, but I wanted to check before starting to change things...

  Welcome to the Forums - you are right to worry about this situation - check on http://www.yellow-bricks.com/2010/02/22/the-resource-pool-priority-pie-paradox/ for description - but don't worry Duncan also has a solution - http://www.yellow-bricks.com/2010/02/24/custom-shares-on-a-resource-pools-scripted/

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Flash wont 'register' on XP sp3 using IE7 but that works well on Safari

  Hello

  I lost flash on my desk, that I don't even remember how long ago. I just downloaded safari and used for things that need flash as youtube and others.

  I really want to solve this problem, so it does not work with Internet Explorer again, however. I read several help letters posted and tried to uninstall and reinstall and reboot several times and search the stop bit for all sorts of things but no luck. When I go to the control panel and click on the flash icon it says flash is installed for safari, but not for IE safari version is 10.3.181.34 when I do the installation for IE, it works 53% and fails and says "error unable to save. I ran malwarebytes, ccleaner and avg and avast antivirus, thinking there had to be some kind of malware, but no difference.

  If someone take me by the hand and tell me step by step what to do to diagnose and fix this problem I would be estatic. So, thanks in advance for any help offered.

  Jim III

  Sorry about that; I forgot the download link is incorrect; Download the file from http://kb2.adobe.com/se/cps/494/cpsid_49419/attachments/reset_fp10.zip

  (I will alert you tech services to fix this link of writing).

• I want to use my camcorder panasonic SC-with v720 good hdmi as a webcam how do I do that

  Subject: I want to use my camcorder panasonic SC-with v720 good hdmi as a webcam how do I do that

  I was looking for a good webcam (video camera) that I can use to spread my webinars.

  I can't find on the website of apple that works well with my macbook so I can use it in quicktime, Skype, facetime, google den, jam Webinar, goto webinar etc.

  If you know that a good webcam please let me know.

  Then I found an article on the internet how to use your own video camera as a webcam.

  But you must have some sort of converter video thunderbolt Blackmagic Design UltraStudio datalogger of 150 dollars.

  I don't understand that, my camcorder has my mac book has hdmi hdmi why isn't is possible to connect them so that I can use my camcorder as a webcam.

  My panasonic SC-720v is also compatible with imovie.

  Please who can help out me.

  Greetings

  Conrad

  The Netherlands.

  By the present the link which connect a video camera with the crush blabla UltraStudio recorder of Blackmagic Design Mini converter

  https://Ozar.me/2014/03/using-HD-camcorder-Mac-webcam/

  I think that the HDMI on your Air port was released only to screen external which is why you need the converter.

• I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black

  I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black, the upper band has Taylor Swift and a few small icons to the bottom of the page. If I type Perry Como, in the search box, the page does not change.

  lysdexic01, I know almost exactly what you describe on my screen of iTunes Store recently updated for Windows 7 64-bit. Only difference is that the icons in the black box are invisible until I move the mouse above them, their location by trial and error. Once activated, the icon remains visible. Each found icon flickers at first, but stops flashing if I pass the mouse over it.

  I think that the store is now functional and useless for those of us experiencing this problem. Other users have reported that their iTunes store screen flickers since they updated iTunes to the latest version, but most did not mention the area big black screen that you and I see.

  So far, Apple seems not to believe that there is a problem with the software to update iTunes. It is therefore important that users continue to report these problems to Apple that there are enough complaints for attention even during a week of office party.

• I get a server error live when I try to load Halo 2 in windows 7. I Shadow Run responsible, and I am disconnected. It worked fine on vista 64. Can I disable Windows Live? I use the game as independent.

  Upgrade to Windows 7 Pro 64.   Loaded Shadow Run, works well, tried to play Halo2, which was already on the machine, and it does not open.  I get an error message that the server is already running.  I tried the compadiblity box and disconnected the modum by forums, it still does not work.  Thanks for all the ideas.  Mike Moczan

  Hi, Mike Moczan,.

  Welcome to the Microsoft Answers site!

  I suggest you to load the game in a clean boot state to see if the problem is not caused by the interference of any third-party application.

  To perform a clean boot on a computer that is running Windows 7, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.microsoft.com/kb/929135.

  In addition, see the section on how to restore your computer to a Normal startup mode.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you run sfc/scannow, using i386, getting the error "files required for Windows to run correctly have been replaced by unrecognized versions.»

  When I run the sfc/scannow, I get a message telling me "files which are required for Windows to run properly have been replaced by unrecognized versions." To maintain stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition Service Pack 3 CD now"with options; try again, more information or to cancel.

  A CD came with the computer and I don' t know how, or if I can use the i386 at this stage. contains WINNT i386. EXE, and WINNT32.exe indicating me a full copy of the system.

  If it is doable but requiring a major tech-skills, I will put an end to this attempt and try to find a CD. (old dog, new tricks)

  Thanks for any advice.

  Hello

  Please go through this page.

  http://www.updatexp.com/scannow-SFC.html

  Thank you

  Dinesh

  You can vote if my answer is helpful. Thank you

• Do I still need to run the Windows Firewall when I use Norton360?

  Do I still need to run the Windows Firewall when I use Norton360?

  Hello

   
  A firewall is software or hardware that checks information coming from the Internet or a network, then it blocks or allows it to pass through your computer, depending on your firewall settings.
  A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.
  A firewall is not the same thing as an antivirus program. To help protect your computer, you need a firewall and an antivirus and anti-malware program.
  
  Norton 360 from Symantec's all-in-one security service that protects your computer and your data against today's Internet threats.
   
  Norton 360 can be functioning as an antivirus, firewall, or offer according to your settings.
   
  We recommend that you only have an antivirus and a firewall on your computer, the choice of what antivirus or firewall is yours.

• where can I buy product keys for windows 7 pro for use on 3 laptops now running on xp pro?

  I have now 3 laptops with XP pro, end of support I consider buying windows 7 pro, but I'll need more of a product key.

  System requirements:

  * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

  * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

   

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

  Where you buy Windows 7 Professional:

  Full version - Microsoft Windows 7 Professional

  Version upgrade - Microsoft Windows 7 Professional Upgrade

• I have a new computer with Windows 10 and will use Acrobat 9.0 Standard of my old computer (Windows 7). I download the program for Adpbe and when I install it so I put my serial number and get the answer, it is not a number valid serial. What it takes

  I have a new computer with Windows 10 and I use Acrobat 9.0 Standard of my old computer (Windows 7). I download the program from Adobe, and when I install it then I put my serial number and get the response "is not a number valid serial. What should do? I have an account at Adobe with all my serial number

  Hi rolfb13339293,

  I would like to inform you that acrobat 9 is not compatible with windows 10.

  You can check system requirements here: Adobe Acrobat required configuration

  The latest version is Acrobat DC.

  Please let us know if you need additional assistance.

  Concerning

  Sarojini

• I use Photoshop for 12 years or more on a succession of computers.  It works well on my current machine (Windows 7), but will not work on a computer that is running Windows 10 built for me.  Photoshoppowers upward but then gets off by Win

  Question? I use Photoshop for 12 years or more on a succession of computers.  It works well on my current machine (Windows 7), but will not work on a computer that is running Windows 10 built for me.  Photoshop turns on but gets so turned off by Windows 10. V. frustrating - what can I do?

  What version of Photoshop? have you tried to do a right-click on the icon and selecting run as administrator

• Can I use my license to run LabVIEW to work on a PC and at home on an iMac?

  I would like to be able to work on my LabVIEW projects at home to avoid a long drive, which seems to be allowed by the license (single user license). However, my work computer is a Dell PC and my home one as imac and I said I need another license for the iMac, which is very expensive. The license does not say computers must be of the same type, and I am fulfillng the license terms that I can't run both versions at the same time. If someone else has had this problem and if so, how is it resolved.

  TIA for any help.

  (I hope this is the right forum for this question, but I can't find one for a single-user license)

  Hi LongTom,

  LabVIEW for Windows and LabVIEW for Mac are not only different licenses, the software is actually different. The architecture of operating systems is different enough so that the copy of Windows in LabVIEW and the copy of Mac have different software in them.

  But do not despair, there is a way around this. You can install a virtual Windows on your Mac Machine. This creates an environment on your Mac, which is actually a Windows environment. Once you have done this, you can install the software on your Virtual Machine and it use it.

  The license allows that LabVIEW named users to install on 3 computers at work and another at home, then you are in the terms of the license.

  Vsenior

• Computer with Windows XP running slow and what is Svchost.exe?

  Original titile: my Acer One ZG 5 is apparently very slow a file called scvhost.exe (I think) eats memory. What can I do?

  My Acer One ZG 5 is apparently very slow a file called scvhost.exe (I think) eats memory. What can I do?

  What is useful or even possible to upgrade to windows 7?

  Hello

  Svchost.exe is a process on the computer that hosts, or contains, other individual services that Windows uses to perform various functions. For example, Windows Defender uses a service that is hosted by a svchost.exe process.

  There may be multiple instances of svchost.exe running on your computer, each instance containing different services. One instance of svchost.exe can host a single service for a program, and another instance can host several services related to Windows. You can use Manager tasks to display services running under each instance of svchost.exe.

  To view the services that are running under svchost.exe:

  (a) open the Manager the tasks by right-clicking on the taskbar and then click Task Manager.
  (b) click on process tab.
  (c) If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
  (d) Hovering mouse on one of the processes will show you a list of all the services.

  You mentioned that your computer is running slowly. Follow the troubleshooting method specified in the link here.

  Method: Follow the steps for Windows XP.

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=ZX7S9AI1uI1

  You can follow the steps here to upgrade Windows XP to Windows 7.

  Upgrade Windows XP to Windows

  http://Windows.Microsoft.com/en-in/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See this link:

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=I9GWec8FSz3

  Email us if you have any further questions. We will help you.

• Problems with windows update, run sfc/scannow and boot into safe mode. (Vista Home Premium)

  Hi all

  Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.

  To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.

  A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.

  I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.

  Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.

  I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.

  I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.

  Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.

  Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.

  If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!

  DISM is a thing of Windows 7. First test the hardware.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.