Windows 7 saves only me as a temporary user. Cannot connect as an administrator.

Similar Questions

• How to activate Windows XP after the installation of repair when you cannot connect to Normal startup.

  I got XP Home SP2 OEM installed on an AMD machine and the power supply is dead.
  I have a P4, I prefer to use in any case, I moved the hard drives of the AMD machine to machine P4.  Of course, XP wouldn't boot.
  Without saving anything, I performed a repair installation (under the installer, not Recovery Console).
  Everything seemed ok, but eventually, I restarted XP and a message box informed me that I could not connect until I had activated XP.
  Unfortunately, I can not run the Activation Assistant because I can not connect.

  I found that I could start the computer Safe Mode / command prompt and could then start Windows Explorer from the command line.
  I followed some advice I found online: I extracted wpa.dbl drive OEM installation and copied in the folder Windows\System32 and rebooted.  Nothing apparently changed; "" I still couldn't log mode "normal".
  I restarted mode safe mode / command prompt, began to Windows Explorer and installed XP SP3.

  Now I can connect mode safe mode without network but cannot connect with networking.  Normal mode is not yet available.

  When I try to start 'normally', the saying that I need to activate before I can connect message.  If I say 'Yes' to 'Activate now?', the background of the desktop appears (my own shows JPG) - but that's all.  The mouse cursor is there, but I have found no way to access all the features after it.

  I need suggestions for possible patches that will avoid the need to reinstall completely.

  Here is the response of Fracture, it worked for me:

  http://social.Microsoft.com/forums/en-us/genuinewindowsxp/thread/ece30d55-d72d-4FF9-AFE8-a577f0f4564f

• The user cannot connect to a Windows 7 PC unless you are an administrator

  I'm deployment Windows 7 SP1 x 64 bit computers throughout my business.  Only, it was brought to my attention that impossible to connect a user trying to connect to a PC that is part of the field unless they are configured as a local administrator on that computer.  When they try to log on, they get the message: "service Servicethe profile of the user didn't login.  Could not load user profile. »

  In each case where it happened, a user tries to connect to a PC for the first time with their powers AD and get the above error.  If I add the user to the Administrators group, they can connect with no problem.  The other answers, I found have dealt with a bad profile, but in this case they user has never been on the PC so there is no profile for this user.

  Does anyone have any suggestions?

  Hello

  Please contact the Microsoft Community.

  I would have you post your query in the TechNet forums because it caters to an audience of it professionals.

  Check out the link-
  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• Windows Server 2008 fax and scanning... .cannot connect fax modem

  Hello

  I am running Windows Server 2008 R2. Recently, apparently after you install some automatic updates when the server unexpectedly shut down several weird errors are produced on the machine. First to be noticed was that faxes were more to be received. While they inspected more, the fax service had stopped working and could not be restarted, such as the Windows event log. After searching for some time, a solution was found here: http://social.msdn.microsoft.com/forums/en-US/windowscompatibility/thread/c75ae899-d05b-411d-a7f2-00fdd33b8589/

  Fix Subinacl.exe described in the post didn't work, but deleting a corrupted windows journal file did, and the diary of events and fax services would begin again.

  I thought that my problem was resolved, but the fax service is still broken.

  Trying to set up the server to receive faxes with Windows Fax and Scan, once more, as he had done very well before, I came across another error. What the first implementation account fax by following the Wizard launched by selecting "new fax" for the first time, or through the tools-> accounts-> options for adding fax, the mistakes of the wizard with this message: "there was an error in setting up the account. Please contact your administrator. " After reviewing several other forums (this issue has been much more difficult to find information on then the first described error), this solution seemed to be what has pointed out several positions:

  http://www.Vistaheads.com/forums/Microsoft-public-Windows-Vista-print-fax-scan/50649-fax-account-Wizard-error-2.html

  This solution involves deleting the registry keys for accounts via regedit. I tried this, and it did not work.

  It doesn't seem to be that much more that I can do. I was ready to try a restore of the system on the server, but apparently there were not a restoration of recorded images, even if this isn't an option.

  Are there any other fixes documented for this?

  Hi JaredGohr,

  I suggest you to send your requests in the link for better support below.

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

  I hope this helps.

• I use windows 7 64-bit edition Home premium and I cannot connect to access database in java program.it shows error database connection driver not installed.

  I am using windows 7 64 bit home premium I installed ms office 2007 and did all the settings.
  but I am unable to connect to the Access database in java program.it shows error database connection driver not installed.
  Please give me the solution...

  Hello

  I suggest you to ask your question about Java programming forums on the subject.

  https://forums.Oracle.com/Forums/Forum.jspa?forumid=922

  You can also ask your question on the forums to access.

  http://answers.Microsoft.com/en-us/Office/forum/access?page=1&tab=all&TM=1349633636662

• User cannot connect again PC Windows 7, error "the user profile service has no logon. User profile cannot be loaded.

  Our plant manager just got a new PC and I've set up with Windows 7.  I can log on fine using my user account.  But when it tries to connect, it receives the "the user profile service has no logon. Error could not load the user profile.  It can connect to other computers fine, Windows XP & Windows 7 computers.  It's just that a laptop could not connect to.

  It was a VIP user.  He's my boss of bosses bosses if you know what I mean.  What I can do.  I tried "patches" for the mistake that I found online, but none of them helped.
  Help me!  Please, I beg you!

  I did other tests just now and I seemed to have found a "solution".  Here are the steps:

  1 Add the user to the local Administrators group
  2 log in as a user
  3. close the user session
  4 log in as network administrator / local
  5 remove the user from the Administrators group
  6 log in as user
  7. the success!
  Still do not understand what was going on the devil, but at least I know the work around her now!

• "Backup and restore" in Windows 7 saves nothing, except the data files?

  I want to save my 'Favorites' of internet list, messages stored in Live mail and my address book in Live mail.  It seems that the "Backup and restore" function in Windows 7 saves only data files unless you choose the option of system image, and then it is not yet clear and seems to save much larger files that I could put on a DVD.

  Can someone direct me to information on this topic or suggest a better method of simple backup.

  By default, Windows 7 saving files in libraries and folders for all users.  That includes everything in your user folder: data applications, contacts, desktop, downloads, Favorites, music, photos, documents, etc..  Windows Live Mail stores messages in the application data folder, so they are automatically backed up.

  The system image contains everything on your computer.

  Both types of backup can create more data that a DVD can hold.  I recommend that you get an external drive for backups. Owner, Boulder computer Maven
  Most Microsoft Valuable Professional

• Users cannot use a smart card to log on a Server Terminal Services session on a computer that is running Windows Server 2008 R2 with SP1

  We have a Windows Server 2008 R2 with Sp1. There was the same exact problem in Windows Server 2008 (KB958596).

  When you use RDP or ICA (Citrix XenApp 6), smart card login prompt at random does not appear. When we close the RDP or ICA and make a new session of the guest of the smart card is here.

  Where can we get a fix, or a reg fix?

  Hotfix for Windows Server 2008 below...

  http://support.Microsoft.com/kb/958596

  In this scenario, users are unable to connect with their card chip and instead, he is invited for their usernames and passwords. If users don't provide these details, the Terminal Services session times out and disconnects.

  When this problem occurs, the option of smart card logon does not appear in the Terminal Services session. Users cannot connect by using their secret codes, and they must provide a user name and password. The option of smart card logon working again after that that they reconnect to the Terminal Services session one or more times

  Hello y2000max,

  Your windows server is beyond the scope of what is generally answered in these forums of consumers. I would recommend reposting among our public IT to Technet-Windows Server securityprofessionals. Thank you!

• I have 10 windows and items 14. The game version saves only the edited phito. Have checked the appropriate boxes.

  I have 10 windows and elements 1. The ENP only the retouched version. I checked the boxes to include and save.

  williamp74752947 wrote:

  Thank you for your response. My problem is when I try to back up the original

  and edited the photo in the Organizer, it saves only the edited photo. I have

  checked the boxes to save them both. My 12 items records both in the Organizer.

  ??? When you save as a set of version, the original is just closed without change; This is the main reason, keeping the original unchanged. This is the version that is recorded. What boxes did you check? Maybe after a screenshot.

  There is no difference between 12 and 14 versions, except that the 14 shows default version of the 'adaptive grid' discovers instead of the "detailed" view You can switch between the two views with the shortcut Ctrl + D. Only the former 'detail' lets see show you both the original and the version.

• How can I save ONLY bookmarks and extensions

  I'm about to do a clean reinstall of Firefox. I want to save ONLY the bookmarks and Extensions and ANY OTHER Firefox profile. How can I do this please?

  Thank you

  Christine said

  I'm about to do a clean reinstall of Firefox. I want to save ONLY the bookmarks and Extensions and ANY OTHER Firefox profile. How can I do this please?

  Thank you

  For bookmarks:

  • Click the Bookmarks button, and then select show all bookmarks to open the bookmarks library. (You can use these keyboard shortcuts: Ctrl + Shift + B)
  • In the library window, click on import and backup button, and then select backup...
  • Save the file in your favorite place on the hard drive.

  But I'm not sure of the extension. So here's an idea on my side that connect to your account with synchronization. See this help: How can I set up Firefox Sync the sync settings, choose only bookmarks and Add-ons. Hope this can help.

• Windows Installer error only by the installation of the machine is allowed. Please make sure that the user has the appropriate rights to do so.

  Trouble with trying to install an MSI Package. Receive the error message only by the installation of the machine is allow. It's when you try to run manually. When you try to run msiexec cmd

  msiexec /i "C:\Mimecast Services for Outlook 4.0.411.5287 (32 bit) GPO.msi" /qb/log "C:\install.log.

  = Recording started: 04/09/2013-10:36:27 Build type: SHIP UNICODE 5.00.7601.00 appeal process: C:\windows\system32\msiexec.exe =.
  MSI (c) (58:C0) [10:36:27:087]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

  MSI (c) (58:C0) [10:36:27:087]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

  MSI (c) (58:88) [10:36:27:107]: Resetting cached policy values
  MSI (c) (58:88) [10:36:27:107]: value of strategy Machine 'Debug' is 0
  MSI (c) (58:88) [10:36:27:107]: * RunEngine:
  Product: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi
  Action:
  Command line:
  MSI (c) (58:88) [10:36:27:107]: Client and UI is none or basic: full installation running on the server.
  MSI (c) (58:88) [10:36:27:107]: grabbed execution mutex.
  MSI (c) (58:88) [10:36:27:147]: Cloaking enabled.
  MSI (c) (58:88) [10:36:27:147]: attempt of activation of all disabled privileges before calling install on server
  MSI (c) (58:88) [10:36:27:147]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C 54:4) [10:36:27:157]: running the installation inside the multi-package transaction Services C:\Mimecast for Outlook 4.0.411.5287 (32-bit) GPO.msi
  MSI (s) (C 54:4) [10:36:27:157]: grabbed execution mutex.
  MSI (s) (54:F8) [10:36:27:157]: Resetting cached policy values
  MSI (s) (54:F8) [10:36:27:157]: value of strategy Machine 'Debug' is 0
  MSI (s) (54:F8) [10:36:27:157]: * RunEngine:
  Product: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi
  Action:
  Command line:
  MSI (s) (54:F8) [10:36:27:477]: value of strategy Machine 'DisableUserInstalls' is 0
  MSI (s) (54:F8) [10:36:27:477]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (54:F8) [10:36:27:477]: "DisableMedia" user policy value is 0
  MSI (s) (54:F8) [10:36:27:477]: value of strategy Machine 'AllowLockdownMedia' is 0
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: Media enabled only if the package is safe.
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: looking for sourcelist for product {C28136F7-F2C7-4426-B26F-F7E03922B34B}
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: added {C28136F7-F2C7-4426-B26F-F7E03922B34B}; for the potential sourcelist (pcode; disc; relpath) list.
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: check now product {C28136F7-F2C7-4426-B26F-F7E03922B34B}
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: Media is enabled for the product.
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: attempting to use LastUsedSource from source list.
  MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: source C:\windows\ccmcache\4\ by train.
  MSI (s) (54:F8) [10:36:27:787]: entering CMsiConfigurationManager::SetLastUsedSource.
  MSI (s) (54:F8) [10:36:27:787]: source specified is already in a list.
  MSI (s) (54:F8) [10:36:27:787]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'DisableBrowse' is 0
  MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'AllowLockdownBrowse' is 0
  MSI (s) (54:F8) [10:36:27:787]: adding new sources is allowed.
  MSI (s) (54:F8) [10:36:27:787]: the LastUsedSource value: C:\windows\ccmcache\4\.
  MSI (s) (54:F8) [10:36:27:787]: value LastUsedType: n.
  MSI (s) (54:F8) [10:36:27:787]: A LastUsedIndex: 1.
  MSI (s) (54:F8) [10:36:27:787]: SOURCEMGMT: resolved source: 'C:\windows\ccmcache\4\ '.
  MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'LimitSystemRestoreCheckpointing' is 0
  MSI (s) (54:F8) [10:36:27:787]: Note: 1: 1715 2: Services for 32-bit Outlook Mimecast
  MSI (s) (54:F8) [10:36:27:787]: SRSetRestorePoint API call. dwRestorePtType: 0, dwEventType: 102, llSequenceNumber: 0, szDescription: «Installed it Services for Outlook 32-bit»
  MSI (s) (54:F8) [10:36:27:787]: the system restore service is disabled. Referred State: 1058. GetLastError() returned: 1058
  MSI (s) (54:F8) [10:36:28:117]: file will have the applied safety of OpCode.
  MSI (s) (54:F8) [10:36:28:147]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> ' C:\Mimecast Services for Outlook 4.0.411.5287 (32 bit) GPO.msi ' against the software restriction policy
  MSI (s) (54:F8) [10:36:28:147]: STRATEGY of RESTRICTION SOFTWARE: Services C:\Mimecast for Outlook 4.0.411.5287 (32-bit) GPO.msi has a digital signature
  MSI (s) (54:F8) [10:36:28:547]: STRATEGY of RESTRICTION SOFTWARE: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi is allowed to run at the level of authorization 'unlimited '.
  MSI (s) (54:F8) [10:36:28:547]: dialogue of end not activated
  MSI (s) (54:F8) [10:36:28:547]: ==> C:\windows\ccmcache\4\Mimecast4.0.msi original packaging
  MSI (s) (54:F8) [10:36:28:547]: we're running out of ==> C:\windows\Installer\14b48052.msi package
  MSI (s) (54:F8) [10:36:28:547]: APPCOMPAT: looking for entry with ProductCode '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' appcompat database
  MSI (s) (54:F8) [10:36:28:547]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (54:F8) [10:36:28:557]: MSCOREE not loaded loading copy from system32
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisablePatch' is 0
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'AllowLockdownPatch' is 0
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableLUAPatching' is 0
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableFlyWeightPatching' is 0
  MSI (s) (54:F8) [10:36:28:557]: APPCOMPAT: looking for entry with ProductCode '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' appcompat database
  MSI (s) (54:F8) [10:36:28:557]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (54:F8) [10:36:28:557]: transformations are not secure.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is 'C:\install.log.
  MSI (s) (54:F8) [10:36:28:557]: command line: MSIINSTALLPERUSER = 3 CURRENTDIRECTORY = C: \ CLIENTUILEVEL = 2 CLIENTPROCESSID = 3672
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding PackageCode property. Its value is '{6C9809C5-9DBC-4683-AE5F-3E05D53939EA} '.
  MSI (s) (54:F8) [10:36:28:557]: Product Code spent in Engine.Initialize: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
  MSI (s) (54:F8) [10:36:28:557]: the Product Code of the table of properties before transformations: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
  MSI (s) (54:F8) [10:36:28:557]: the Product Code of the table of properties after transformations: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
  MSI (s) (54:F8) [10:36:28:557]: unregistered product: first start installation
  MSI (s) (54:F8) [10:36:28:557]: has determined that the existing product (this product or the product being upgraded with a patch) is installed by user.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MSIINSTALLPERUSER property. Its value is '3'.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: deleting ALLUSERS property. Its current value is '1 '.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: deleting MSIINSTALLPERUSER property. Its current value is '3'.
  MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is assigned admin: LocalSystem has the key to publish.
  MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is managed.
  MSI (s) (54:F8) [10:36:28:557]: MSI_LUA: invites of credentials not required, the user is an administrator
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding ProductState property. Its value is '1 '.
  MSI (s) (54:F8) [10:36:28:557]: entering CMsiConfigurationManager::SetLastUsedSource.
  MSI (s) (54:F8) [10:36:28:557]: source specified is already in a list.
  MSI (s) (54:F8) [10:36:28:557]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (54:F8) [10:36:28:557]: adding new sources is allowed.
  MSI (s) (54:F8) [10:36:28:557]: the Package name from the configuration data: "Mimecast4.0.msi."
  MSI (s) (54:F8) [10:36:28:557]: Note: 2 1: 2262: AdminProperties 3:-2147287038
  MSI (s) (54:F8) [10:36:28:557]: Machine policy value 'DisableMsi' is 0
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'AlwaysInstallElevated' is 0
  MSI (s) (54:F8) [10:36:28:557]: "AlwaysInstallElevated" user policy value is 0
  MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is assigned admin: LocalSystem has the key to publish.
  MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is managed.
  MSI (s) (54:F8) [10:36:28:557]: the product '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' is running with elevated privileges: product is affected.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MSIINSTALLPERUSER property. Its value is '3'.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is "C:\". ».
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '2'.
  MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is '3672'.
  MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding MsiRestartManagerSessionKey property. Its value is 'b9237eca8dffb44583db9105bf61f283 '.
  MSI (s) (54:F8) [10:36:28:567]: MANAGER of REBOOT: logon.
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: deleting MSIINSTALLPERUSER property. Its current value is '3'.
  MSI (s) (54:F8) [10:36:28:567]: TRANSFORMS property is now:
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding PRODUCTLANGUAGE property. Its value is "1033".
  MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application data
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Favorites
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Network shortcuts
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Documents
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Printer shortcuts
  MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Recent
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\SendTo
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Templates
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\ProgramData
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\Users\tech.support\AppData\Local
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\Users\tech.support\Pictures
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Menu\Programs\Administrative of Directors Data\Microsoft\Windows\Start
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application start\program Data\Microsoft\Windows\Start
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Desktop
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
  MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\windows\Fonts
  MSI (s) (54:F8) [10:36:28:587]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
  MSI (s) (54:F8) [10:36:28:597]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
  MSI (s) (54:F8) [10:36:28:597]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding USERNAME property. Its value is "Oriel securities user".
  MSI (s) (54:F8) [10:36:28:597]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is "Oriel Securities Ltd.".
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\windows\Installer\14b48052.msi '.
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is 'C:\windows\ccmcache\4\Mimecast4.0.msi '.
  MSI (s) (54:F8) [10:36:28:597]: value of strategy Machine 'MsiDisableEmbeddedUI' is 0
  MSI (s) (54:F8) [10:36:28:597]: Note: 1: 2205 2:3: Package_correctif
  MSI (s) (54:F8) [10:36:28:597]: policy value 'DisableRollback' Machine is 0
  MSI (s) (54:F8) [10:36:28:597]: strategy user 'DisableRollback' is 0
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding UILevel property. Its value is '3'.
  = Logging started: 04/09/2013-10:36:28 =.
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding ACTION property. Its value is 'INSTALL '.
  MSI (s) (54:F8) [10:36:28:597]: doing action: INSTALL
  Action start 10:36:28: INSTALL.
  MSI (s) (54:F8) [10:36:28:597]: ExecuteSequence running
  MSI (s) (54:F8) [10:36:28:597]: action driving: FindRelatedProducts
  Action start 10:36:28: FindRelatedProducts.
  MSI (s) (54:F8) [10:36:28:597]: action driving: AppSearch
  Action ended at 10:36:28: FindRelatedProducts. Returns the value 1.
  Action start 10:36:28: AppSearch.
  MSI (s) (54:F8) [10:36:28:597]: Note: 2 1: 2262: Signature 3:-2147287038
  MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding NETFRAMEWORK40FULL property. Its value is '#1 '.
  MSI (s) (54:F8) [10:36:28:597]: Note: 2 1: 2262: Signature 3:-2147287038
  MSI (s) (54:F8) [10:36:28:597]: action driving: OutlookVersionCheck
  Action ended at 10:36:28: AppSearch. Returns the value 1.
  MSI (s) (54:C8) [10:36:28:627]: call for a custom action to distance. DLL: C:\windows\Installer\MSI837D.tmp, point of entry: OutlookVersionCheck
  MSI (s) (54:B8) [10:36:28:627]: generation random cookie.
  MSI (s) (54:B8) [10:36:28:637]: created server custom with PID 4656 (0 x 1230) Action.
  MSI (s) (54:80) [10:36:28:667]: running as a service.
  MSI (s) (54:80) [10:36:28:667]: Hello, I am your 32-bit custom action Server Impersonated.
  Action start 10:36:28: OutlookVersionCheck.
  SFXCA: Extraction of a custom action to the temporary directory: C:\windows\Installer\MSI837D.tmp-\
  SFXCA: Link to the CLR version v4.0.30319
  Call to the custom action CustomAction_OutlookCheck! CustomAction_OutlookCheck.CustomActions.OutlookVersionCheck
  BEGIN OutlookVersionCheck
  OUTLOOK BITNESS IS: x 86
  Key checking: Software\Microsoft\Office\11.0\Outlook
  Key checking: Software\Wow6432Node\Microsoft\Office\11.0\Outlook
  Key checking: Software\Microsoft\Office\12.0\Outlook\InstallRoot
  Key checking: Software\Wow6432Node\Microsoft\Office\12.0\Outlook\InstallRoot
  MSI (s) (54. 68) [10:36:28:827]: PROPERTY CHANGE: adding OUTLOOK_INSTALLED property. Its value is 'TRUE '.
  Key checking: Software\Microsoft\Office\14.0\Outlook\InstallRoot
  Found version: Outlook 2010
  Key checking: Software\Wow6432Node\Microsoft\Office\14.0\Outlook\InstallRoot
  MSI (s) (54. 68) [10:36:28:827]: PROPERTY CHANGE: property to change OUTLOOK_VERSION. Its current value is 'NONE '. Its new value: "Outlook 2010".
  Found version: Outlook 2010
  OUTLOOK_INSTALLED is: TRUE
  IS THE VERSION of OUTLOOK: Outlook 2010
  MSI (s) (54:F8) [10:36:28:830]: action driving: LaunchConditions
  Action ended at 10:36:28: OutlookVersionCheck. Returns the value 1.
  Action start 10:36:28: LaunchConditions.
  MSI (s) (54:F8) [10:38:26:502]: product: service Mimecast for 32-bit Outlook - only by the installation of the machine is allowed. Please make sure that the user has the appropriate rights to do so.

  MSI (c) (58:C0) [10:36:28:850]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

  Installation is allowed only by the machine. Please make sure that the user has the appropriate rights to do so.
  Action ended at 10:38:26: LaunchConditions. Return value 3.
  Action ended at 10:38:26: INSTALL. Return value 3.
  Property (S): UpgradeCode = {586A589B-D6D5-48D3-9B6D-571EF230ED6A}
  Property (S): NETFRAMEWORK40FULL = 1 #.
  Property (S): LAUNCHOUTLOOKONEXIT = 1
  Property (S): WIXUI_INSTALLDIR = INSTALLDIR
  Property (S): OutlookOpen = false
  Property (S): ProgramFilesFolder = C:\Program Files (x 86).
  Property (S): VersionNT = 601
  Property (S): Manufacturer = Mimecast Ltd
  Property (S): ProductCode = {C28136F7-F2C7-4426-B26F-F7E03922B34B}
  Property (S): ProductLanguage = 1033
  Property (S): ProductName = Mimecast Services for 32-bit Outlook
  Property (S): ProductVersion = 4.0.348.5166
  Property (S): ARPPRODUCTICON = MainIcon.exe
  Property (S): ARPHELPLINK = * address email is removed from the privacy *
  Property (S): ARPNOMODIFY = 0
  Property (S): Platform = *.
  Property (S): ROOTDRIVE = C:\\
  Property (S): MsiBitness = x 86
  Property (S): MimecastInstaller = *.
  Property (S): CAP_Common = *.
  Property (S): CAP_Common.Options = *.
  Property (S): CAP_Common.Options.Credentials = *.
  Property (S): CAP_Common.Options.ChangePassword = *.
  Property (S): CAP_Common.Options.Network = *.
  Property (S): CAP_Common.Options.Network.Read = *.
  Property (S): CAP_Common.Options.Network.Update = *.
  Property (S): CAP_Common.Options.Capabilities = *.
  Property (S): CAP_Common.Update.Manual = *.
  Property (S): CAP_Archive = *.
  Property (S): CAP_Archive.Search = *.
  Property (S): CAP_Archive.Search.Quick = *.
  Property (S): CAP_Archive.Search.Basic = *.
  Property (S): CAP_Archive.Search.Builder = *.
  Property (S): CAP_Archive.Search.Context = *.
  Property (S): CAP_Archive.Search.Recent = *.
  Property (S): CAP_Archive.Search.Favourite = *.
  Property (S): CAP_Archive.Search.Manage = *.
  Property (S): CAP_Gateway = *.
  Property (S): CAP_Gateway.Block = *.
  Property (S): CAP_Gateway.Block.Address = *.
  Property (S): CAP_Gateway.Block.Domain = *.
  Property (S): CAP_Gateway.Block.ReportSpam = *.
  Property (S): CAP_Gateway.Block.ManagedSenders = *.
  Property (S): CAP_Gateway.OnHoldItems = *.
  Property (S): CAP_Gateway.OnHoldItems.Personal = *.
  Property (S): CAP_Gateway.OnHoldItems.Moderated = *.
  Property (S): CAP_Gateway.OnHoldItems.Release = *.
  Property (S): CAP_Gateway.OnHoldItems.Block = *.
  Property (S): CAP_Gateway.Track = *.
  Property (S): CAP_Gateway.Transport = *.
  Property (S): CAP_Gateway.Transport.Secure = *.
  Property (S): CAP_Gateway.Transport.CCM = *.
  Property (S): CAP_Gateway.Transport.Stationery = *.
  Property (S): CAP_Gateway.Transport.Stationery.None = *.
  Property (S): CAP_Gateway.Transport.Stationery.Select = *.
  Property (S): CAP_Gateway.Transport.Attachments = *.
  Property (S): CAP_Gateway.Transport.Attachments.Convert = *.
  Property (S): CAP_Gateway.Transport.Attachments.Metadata = *.
  Property (S): CAP_Gateway.Transport.Attachments.StripLink = *.
  Property (S): CAP_Continuity = *.
  Property (S): CAP_Continuity.Mailbox = *.
  Property (S): CAP_Continuity.Mailbox.ReceivedItems = *.
  Property (S): CAP_Continuity.Mailbox.SentItems = *.
  Property (S): CAP_Continuity.Monitor = *.
  Property (S): CAP_Continuity.Monitor.Auto = *.
  Property (S): CAP_Continuity.Monitor.User = *.
  Property (S): CAP_Continuity.Monitor.Admin = *.
  Property (S): CAP_Continuity.Enable = *.
  Property (S): CAP_Continuity.Enable.Auto = *.
  Property (S): CAP_Continuity.Enable.Admin = *.
  Property (S): CAP_Piits = *.
  Property (S): CAP_Piits.Management = *.
  Property (S): CAP_Piits.AutoMount = *.
  Property (S): Global.Service.AccountType = *.
  Property (S): Global.Service.Username = *.
  Property (S): Global.Service.Password = *.
  Property (S): Global.WebProxy.Enable = *.
  Property (S): Global.WebProxy.Type = *.
  Property (S): Global.WebProxy.URL = *.
  Property (S): Global.WebProxy.Username = *.
  Property (S): Global.WebProxy.Password = *.
  Property (S): Global.Settings.IgnoreLocal = *.
  Property (S): Global.AutoUpdate.URL = *.
  Property (S): Global.AutoUpdate.Enable = *.
  Property (S): Global.Logging.LogDirectory = *.
  Property (S): Global.Logging.MaxFileSize = *.
  Property (S): Global.Service.MaxRolls = *.
  Property (S): Global.Logging.Level = *.
  Property (S): Session.Pits.FolderSyncInterval = *.
  Property (S): Global.Piits.MaxMessagesPerFolder = *.
  Property (S): Global.Service.InstallDirectory = *.
  Property (S): Global.Service.DataCacheSize = *.
  Property (S): Session.Continuity.PreDupeDuration = *.
  Property (S): Session.Continuity.PostDupeDuration = *.
  Property (S): Session.Continuity.HardFrequency = *.
  Property (S): Session.Continuity.SoftDuration = *.
  Property (S): Session.Continuity.EndContinuityExchangeAvailable = *.
  Property (S): Session.Continuity.EndContinuityMimecastUnavailable = *.
  Property (S): Global.Feedback.Recipients = *.
  Property (S): DefaultUIFont = *.
  Property (S): MSIRESTARTMANAGERCONTROL = DisableShutdown
  Property (S): REBOOT = ReallySuppress
  Property (S): OUTLOOK_VERSION = Outlook 2010
  Property (S): OUTLOOK_BITNESS = x 86
  Property (S): ErrorDialog = ErrorDlg
  Property (S): SERVICE_DIR = Windows Service Mimecast
  Property (S): SecureCustomProperties = NETFRAMEWORK40FULL; NEWERPRODUCTFOUND; OLDAPPFOUND; PREVIOUSVERSIONSINSTALLED; WIX_DOWNGRADE_DETECTED; WIX_UPGRADE_DETECTED
  Property (S): MsiHiddenProperties = _LicenseAgreed; CAP_Archive; CAP_Archive.search; CAP_Archive.search.Basic; CAP_Archive.search.Builder; CAP_Archive.search.context; CAP_Archive.search.favourite; CAP_Archive.search.manage; CAP_Archive.search.quick; CAP_Archive.search.recent; CAP_Common; CAP_Common.options; CAP_Common.options.capabilities; CAP_Common.options.ChangePassword; CAP_Common.options.credentials; CAP_Common.options.network; CAP_Common.options.network.read; CAP_Common.options.network.Update; CAP_Common.update.manual; CAP_Continuity; CAP_Continuity.enable; CAP_Continuity.enable.admin; CAP_Continuity.enable.Auto; CAP_Continuity.mailbox; CAP_Continuity.mailbox.ReceivedItems; CAP_Continuity.mailbox.SentItems; CAP_Continuity.monitor; CAP_Continuity.monitor.admin; CAP_Continuity.monitor.Auto; CAP_Continuity.monitor.user; CAP_Gateway; CAP_Gateway.block; CAP_Gateway.block.address; CAP_Gateway.block.domain; CAP_Gateway.block.ManagedSenders; CAP_Gateway.block.ReportSpam; CAP_Gateway.OnHoldItems; CAP_Gateway.OnHoldItems.block; CAP_Gateway.OnHoldItems.moderated; CAP_Gateway.OnHoldItems.personal; CAP_Gateway.OnHoldItems.release; CAP_Gateway.track; CAP_Gateway.transport; CAP_Gateway.transport.attachments; CAP_Gateway.transport.attachments.convert; CAP_Gateway.transport.attachments.metadata; CAP_Gateway.transport.attachments.StripLink; CAP_Gateway.transport.CCM; CAP_Gateway.transport.secure; CAP_Gateway.transport.stationery; CAP_Gateway.transport.stationery.None; CAP_Gateway.transport.stationery.Select; CAP_Piits; CAP_Piits.automount; CAP_Piits.Management; DefaultUIFont; Global.AutoUpdate.Enable; Global.AutoUpdate.URL; Global.Feedback.Recipients; Global.Logging.Level; Global.Logging.LogDirectory; Global.Logging.MaxFileSize; Global.Piits.MaxMessagesPerFolder; Global.Service.AccountType; Global.Service.DataCacheSize; Global.Service.InstallDirectory; Global.Service.MaxRolls; Global.Service.Password; Global.Service.Username; Global.Settings.IgnoreLocal; Global.WebProxy.Enable; Global.WebProxy.Password; Global.WebProxy.Type; Global.WebProxy.URL; Global.WebProxy.Username; MimecastInstaller; PLATFORM; Session.Continuity.EndContinuityExchangeAvailable; Session.Continuity.EndContinuityMimecastUnavailable; Session.Continuity.HardFrequency; Session.Continuity.PostDupeDuration; Session.Continuity.PreDupeDuration; Session.Continuity.SoftDuration; Session.Pits.FolderSyncInterval
  Property (S): MsiLogFileLocation = C:\install.log
  Property (S): PackageCode = {6C9809C5-9DBC-4683-AE5F-3E05D53939EA}
  Property (S): ProductState = 1
  Property (S): PRODUCTLANGUAGE = 1033
  Property (S): CURRENTDIRECTORY = C:\
  Property (S): CLIENTUILEVEL = 2
  Property (S): CLIENTPROCESSID = 3672
  Property (S): MsiRestartManagerSessionKey = b9237eca8dffb44583db9105bf61f283
  Property (S): VersionDatabase = 200
  Property (S): MsiSystemRebootPending = 1
  Property (S): VersionMsi = 5.00
  Property (S): VersionNT64 = 601
  Property (S): WindowsBuild = 7601
  Property (S): ServicePackLevel = 1
  Property (S): ServicePackLevelMinor = 0
  Property (S): MsiNTProductType = 1
  Property (S): WindowsFolder = C:\windows\
  Property (S): WindowsVolume = C:\
  Property (S): System64Folder = C:\windows\system32\
  Property (S): SystemFolder = C:\windows\SysWOW64\
  Property (S): RemoteAdminTS = 1
  Property (S): TempFolder = C:\Users\TECH~1.SUP\AppData\Local\Temp\
  Property (S): CommonFilesFolder directory = C:\Program Files (x 86) \Common Files\
  Property (S): ProgramFiles64Folder = C:\Program Files\
  Property (S): CommonFiles64Folder = C:\Program Files\ Files\Fichiers
  Property (S): AppDataFolder = \\gblon-v-fp001\users$\tech.support\Application Data\
  Property (S): FavoritesFolder = \\gblon-v-fp001\users$\tech.support\Favorites\
  Property (S): NetHoodFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Network Shortcuts\
  Property (S): PersonalFolder = \\gblon-v-fp001\users$\tech.support\Documents\
  Property (S): PrintHoodFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Printer Shortcuts\
  Property (S): RecentFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Recent\
  Property (S): SendToFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\SendTo\
  Property (S): TemplateFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Templates\
  Property (S): CommonAppDataFolder = C:\ProgramData\
  Property (S): LocalAppDataFolder = C:\Users\tech.support\AppData\Local\
  Property (S): MyPicturesFolder = C:\Users\tech.support\Pictures\
  Property (S): AdminToolsFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start administration Tools\
  Property (S): StartupFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start demarrer\programmes\demarrage\
  Property (S): ProgramMenuFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\Programs\
  Property (S): StartMenuFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\
  Property (S): DesktopFolder = \\gblon-v-fp001\users$\tech.support\Desktop\
  Property (S): Font = C:\windows\Fonts\
  Property (S): GPTSupport = 1
  Property (S): OLEAdvtSupport = 1
  Property (S): ShellAdvtSupport = 1
  Property (S): MsiAMD64 = 6
  Property (S): Msix64 = 6
  Property (S): Intel = 6
  Property (S): PhysicalMemory = 4027
  Property (S): VirtualMemory = 5339
  Property (S): AdminUser = 1
  Property (S): MsiTrueAdminUser = 1
  Property (S): LogonUser = tech.support
  Property (S): UserSID = S-1-5-21-583907252-2049760794-725345543-5685
  Property (S): UserLanguageID = 2057
  Property (S): ComputerName = OSLLONPC052
  Property (S): SystemLanguageID = 2057
  Property (S): ScreenX = 1024
  Property (S): ScreenY = 768
  Property (S): CaptionHeight = 22
  Property (S): BorderTop = 1
  Property (S): BorderSide = 1
  Property (S): TextHeight = 16
  Property (S): TextInternalLeading = 3
  Property (S): ColorBits = 32
  Property (S): TTCSupport = 1
  Property (S): Time = 10:38:26
  Property (S): Date = 04/09/2013
  Property (S): MsiNetAssemblySupport = 4.0.30319.1
  Property (S): MsiWin32AssemblySupport = 6.1.7601.17514
  Property (S): RedirectedDllSupport = 2
  Property (S): MsiRunningElevated = 1
  Property (S): The privilege = 1
  Property (S): Name of USER = Oriel securities user
  Property (S): COMPANYNAME = Oriel Securities Ltd.
  Property (S): basis of DATA = C:\windows\Installer\14b48052.msi
  Property (S): OriginalDatabase = C:\windows\ccmcache\4\Mimecast4.0.msi
  Property (S): UILevel = 3
  Property (S): ACTION = INSTALL
  Property (S): OUTLOOK_INSTALLED = TRUE
  MSI (s) (54:F8) [10:38:26:532]: see clean files/packages, if there
  MSI (s) (54:F8) [10:38:26:532]: MainEngineThread returned 1603
  MSI (s) (C 54:4) [10:38:26:542]: RESTART MANAGER: closed Session.
  MSI (s) (C 54:4) [10:38:26:542]: sequence number number for this installation system restore.
  = Logging stopped: 04/09/2013-10:38:26 =.
  MSI (s) (C 54:4) [10:38:26:542]: strategy user 'DisableRollback' is 0
  MSI (s) (C 54:4) [10:38:26:542]: policy value 'DisableRollback' Machine is 0
  MSI (s) (C 54:4) [10:38:26:542]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3:2
  MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3:2
  MSI (s) (C 54:4) [10:38:26:542]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (C 54:4) [10:38:26:542]: restoration of the environment variables
  MSI (s) (C 54:4) [10:38:26:542]: object to destroy RemoteAPI.
  MSI (s) (54:B8) [10:38:26:542]: end of thread Custom Action Manager.
  MSI (c) (58:88) [10:38:26:542]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (c) (58:88) [10:38:26:542]: MainEngineThread returned 1603
  = Recording stopped: 04/09/2013-10:38:26 =.

  Appreciate that any direction. Seems that maybe the MSI package might have broken this machine

  Hi Dan,

  This computer is on a domain network?

  I suggest that post you the question in Mimecast forums for more information support:

  Support community-powered Mimecast

  https://community.Mimecast.com/Mimecast

  Hope this information helps.

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thank you

  Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thanks in advance

  Just a thought...

  It may be interesting to try to open Movie Maker and go to...
  Tools / Options / compatibility... tab and left click of the
  "Restore all defaults" button / OK.

• 2 operating systems: Windows 7 makes all folders and files on another partition (Windows XP) read-only! What now?

  2 operating systems: Windows XP and Windows 7

  Windows 7 is to make all the folders and files on another partition (Windows XP) read-only!

  Once, I opened a file from "My Documents" from XP in Windows 7.

  But when I Wen back to Windows XP.

  But while starting up, I got a lot of error messages:

  Access denied!

  When I am gone to Windows 7 yet once I noticed that all records on the other partition where unalterable.

  But after I tried to void that lookt again to see if she had cancelled it.

  But he remains unalterable reports!

  I have lookt on Google and Bing, but could not find someone with the same problem!

  Now it works!

  I used these 10 steps to solve the problem!

  10 STEPS TO GET FULL CONTROL ON a FILE / FOLDER / PARTITION (Microsoft Windows Xp):

  1. press F8

  2. select Safe Mode

  3. log in with an administrator account

  3. go into the properties of the folder / partition / file that you cannot access

  4. Select security and then advanced

  5. in 'owners' define yourself as an owner (if it is not defined)

  6. click on 'Ok '.

  7 configure yourself: make sure you clickt on the box "Total control" (allow)

  8. click 'OK' and then 'apply '.

  9 reboot

  10. the test (if it still does not, try again a few times)

  ____________________________________________________________________________

  And then it worked!

• My Windows Media Player only burns the 1st and last titles, nothing in between, anyone have a solution?

  My Windows Media Player only burns the 1st and last titles, nothing in between, anyone have a solution?... the titles of the first and the last burn, but the tracks between say ERROR OCCURRED, it was working perfectly last night!

  original title: Windows Media Player does not burn!

  Hello

  1. What is the exact error message you get during combustion?
  2. were there any changes (hardware or software) to the computer before the show?

  Method 1: Run the Fixit and see if it helps.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2: perform the steps mentioned below and see if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Click on the link mentioned below as reference.
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Hope this information helps.