Booster and wireless network

Found it difficult to get a signal in some places in the House. I have a WRT54GS router and just bought a Lynksys signal booster.  Can get internet on Mac laptop and desktop wired.  On my desktop wireless, I have signal strength is very good, but cannot access the internet.  Help

JC

What is the model of the wireless adapter?

Which operating system you are using on the Wireless Office?

Which exact error message do you get when you try to connect to the wireless network...?

Tags: Linksys Routers

Similar Questions

  • How to configure a multihomed in Windows 7, wired network and wireless networks at the same time?

    Hello

    I have a fixed computer Windows 7, I need to configure for the use of wire and wireless networks.

    On the phone we transfer vast amounts of data, astronomy cameras than only products of 20 to 30 seconds, space images 3-4 GB each. The cameras are connected to the top of a tower, which in turn is connected via a 45 feet cable CAT-5 to the search engine.

    Internet access requires a wireless network connection.

    These two connections work - separately. I have to disable an and activate the other to pass. This jump back and foth is obviously a bit inconvenient.

    How to configure Windows 7 to manage both types of networks at the same time? On another forum I learned this kind of configuration is called multihoming, and it's something difficult to achieve.

    Having studied more about it, there is another possible solution called Internet connection sharing. that may be easier. I haven't used this option for years (since the routers were introduced) but is still active.

    Disable DHCP on the Dovado or use a cable between the PC and the laptop.

    Turn on the wireless on the PC and make sure that you have an internet connection. Disable wireless on the laptop. Connect the PC's LAN ports and laptop (via router or a cable crossover).

    IN the network of PCs and next to the connections Sharing Center, you must have 2 Ethernet and WiFi options. Double click on WiFi, then on the next screen, click Properties.

    The second tab in the next screen is sharing, check allow other users of the network to connect and then OK.

    Define the IP addresses for PC and laptop as in my previous post, but this time on the laptop set the default gateway to the IP address of the Wired of the PC port, the 1st DNS to the address of the Huawei and value of secondary school who suggested for your ISP.

    This affects your PC to access wireless internet and allows the laptop to access the internet via the PC

    Basic information about ICS are HERE

    Manuals for the Dovado HERE

  • a6755y: a6755y wired and wireless network hard

    I already spoke with my ISP nothing helps technical support.

    I recently created my desktop computer again after having been stored for several months. Before I put it there, I was using wireless internet and local wireline connections regularly and without problem, and now I can not access to either. I have a strong connection with the modem/router device, so I thought that the issue could be in how its configuration or interpret the connection from my computer, but nothing, I have discovered has indicated that this was the case, and convenience store customer support my ISP did not find anything abnormal. I was now more confused when I discovered that it also fails to connect to another computer using a direct wired connection, even though I had in the past linked their and transfer large files regularly. I would like to assume that these issues are linked, to make the simplest solution; but as one involves a separate network adapter, and the other connects directly to the motherboard, I don't think that's likely.

    For any help or suggestion would be appreciated.

    Hi there @_GS

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I understand that you pulled on your desktop, storage and now you can not connect to your wireless network.  I'm happy to help you with this problem.

    Is this the same router that you were using before you put the computer in stock?

    How is the computer to the router? (Sometimes too much signal is as bad as not enough)

    What type of cable you are using for the connection from computer to computer, you mentioned?

    There is special software required?

    Have you other wireless devices that are connected to this router without problem?

    The following pages are useful to the resolution of the problems of wireless connectivity and can help solve this problem.  Try it and tell me if it helps.
    Troubleshooting wireless network and Internet (Windows Vista)

    HP and Compaq Desktop PCs - troubleshooting your network wireless (Windows Vista)

    In addition, you can watch the the power management of your wireless adapter:
    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Forget a network (Windows Vista)
    1. start network and sharing Center.
    2. in the pane tasks, click on manage wireless networks.
    3. right click on the connection that you want to delete and then click on remove network.
    4. in wireless networks handle - warning dialog box, click OK.
    5. the connection is removed from the list of wireless connections that you can view or edit.

    Reset TCP/IP on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here, but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an ethernet connection:
    Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  • Satellite 1900-303 and wireless network?

    I just hand on one of these laptops. However, there is a switch that seems to have a Simbel wireless on the right side of the machine and a light symbol on the front that does not appear in the manual for this laptop wireless. Anyone know if this phone has the ability to internal wireless network? What does this switch and the light? How to activate it etc?

    Any help much apreciated

    Al

    I bought the same laptop new 2 years ago and in the manual, there was an addendum explaining that if there were an equipped module as a dealer option then the machine was Wi Fi... The symbol on the front lights up when you press the switch on the right side when a Toshiba module is mounted but not if you use a card pc as a Belkin (which I use)... Please see response below Toshiba.
    ==============
    The internal Wireless LAN Mini PCI card is no longer supported.
    The option of Toshiba part number was PA3212U-3MPC (Wireless LAN Mini PCI Card
    -2, 4 GHz, 802. 11B - dealer Option). You can check with our sales
    and Marketing shop Toshiba team on 0870 444 8944 to determine if
    stocks remain and if so, information on prices.

    The LED on the laptop only turns on when you use the internal wireless
    LAN Mini PCI card. When you use the PC as the Belkin card LED will be
    does not light. If the Belkin card works and meets your needs, then we
    suggest that you continue to use you this card.

    Concerning

    Customer Contact Center
    Division of information systems
    Information systems of Toshiba (UK) Limited

    Hope that solves your query,

    Considers that Russell.

  • Satellite C660 - key FN and wireless network detection no longer works

    Hi people,

    As a result of a virus, I put my computer to its factory settings.

    I have however lost the use of the function fn (end?) of the keyboard since and therefore cannot control the lighting of the screen and so on via the F keys any longer.

    Also, my computer can not detect wireless networks more. I did all the required updates and checked the State of the wireless card, but still nothing.

    Any ideas?

    See you soon!

    Hello

    May I ask what system you have installed on this laptop?
    Is - this Windows 7?

    If you are using Windows 7, you need to install Toshiba Value added Package and Support Toshiba Flash Cards for utility work affects FN.

    I m nit course on the WLan driver because different C660-xxx supports various wireless network cards. Perhaps you could provide the name of the complete model of the C660-xxx
    This would facilitate the search for the Wlan driver.

  • (Satellite-M45-S269) alternating current and wireless network connection

    Hey!
    Recently I had the following problem: when the laptop is plugged into AC power, wireless works strangely. I want to say that I am able to connect (in fact the signal strength is excellent and packages, the computer receives notoriously exceeds those sent) However, every four or five minutes and always connected, unable to load web pages, as well as the lights of the connection icon in the taskbar wireless network does not appear then this problem occurs (which I (, it means that I stop receiving packets)

    However, this only happens when the laptop is plugged into AC power.
    Any ideas on what's going on? The battery begins to fail? The other day when I turned on the laptop, the screen went black and started making a strange noise, so I removed the battery and put it back, and it worked again.

    Hope someone can help me.
    Looking forward to hearing responses.
    Thank you
    Augustine.

    Hello

    I recommend following:
    First check to see if you can update the WLan card driver.
    If the new driver WLan is available the updated it!
    Also the BIOS should be updated to the newest version too.

    After the update did go to Device Manager and check WLan card properties.
    There is a last power management tab.
    There, you can disable the WLan Card for energy savings.

    Check it out!

  • PC connection and wireless network?

    Only, I ordered my mom a HP Envy 5530 and have looked through the manual. I'm a little still well confused on which method to use to connect to the wireless network.

    Currently, she has a Canon printer & scanner connected to a PC via USB and I could leave them installed until I'm sure she'll love the envy... its router is connected to this PC.

    She would like to be able to use the 5530 for print & scan from the PC but also to print wireless from its iPhone / iPad.

    So should which method I use to connect the 5530 to PC & Wireless network?

    This is possible. Once the printer on the network, it can print from any device that is also on the network. In other words, if the PC is on the network, it can print her wireless too, she didn't need the USB cable connected to anything. If she wants to connect the USB cable to the computer on which is correct also. In the end, as long as the printer is configured for the network, she will be able to print from his iPhone and iPad!

    He didn't need a wireless adapter, the printer is equipped with a wireless radio which allows it to be configured for the network.

  • No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

    I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

    Deactivation and reactivation of these two connections: FAIL.

    "Diagnose and repair" on the two connections: FAIL.

    Under dynamic I.P. type to static/static to the dynamic: FAIL.

    Uninstalled all network via Device Manager devices, then restart: FAIL.

    Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

    The command ipconfig/all text follows:

    ----------------------------------------------
    Microsoft Windows [Version 6.0.6002]
    Copyright (c) 2006 Microsoft Corporation. All rights reserved.

    C:\Users\Brooklyn's>ipconfig/all

    Windows IP configuration

    Name of the host...: Brooklyns-PC
    Primary Dns suffix...:
    Node... type: broadcast
    Active... IP routing: No.
    Active... proxy WINS: No.

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :
    ... Description: Intel (r) Wireless WiFi Link 4965AGN
    Physical address.... : 00-21-5C-31-87-95
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. :
    Description...: Realtek RTL8102E Family PCI - E Fast Ethern
    and NIC (NDIS 6.0)
    Physical address.... : 00-1E-33-4E-2E-F7
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    NetBIOS over TCP/IP...: enabled

    Card tunnel Local Area Connection * 6:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
    B4B}
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 11:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
    0FA}
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 14:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 02-00-54-55-4E-01
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    C:\Users\Brooklyn's >
    --------------------------------------------------

    Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

    I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

  • change router and wireless network

    After I change provider and wireless router my wireless printer won't connect and print wireless will print with cable but not wireless. What should I do to fix this

    Hi floats,

    You will find that this document contains instructions to install the product in a wireless network using an access point , such as a router . This type of network is called an infrastructure network. HP recommends the type of network infrastructure for a wireless connection to your product.

    Follow the steps outlined in the document below and let me know how it goes?

    http://support.HP.com/us-en/document/c02213840

  • I have a compaq presario cq57 notebook pc and my wireless is not solving the problems of work said that the access point and wireless network card works I need help to fix this please

    the internet works only with the ethernet cable and not wireless. I have service with comcast.

    Hi, Antonia.
    Thanks for posting your question on the Forums of community of Microsoft.
     
    1. do you get an error message?
    2. don't you make changes to the computer before the show?
     
    Here are some ways you can follow to resolve the problem:
     
    Method 1:
    Check out the link and follow the steps in the article:
    Troubleshooting your wireless network and Internet access (Windows 7)
    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02543015#n55
     
    Method 2:
    Reference:
    How can I troubleshoot network card?
     
    Hope this solves the problem
  • Tecra M2 and wireless network - signal strength problem

    Need advice buying wireless kit.

    I have a DSL phone line connection and I am currently using a Speedtouch USB modem connected to my workstation down.

    I have a laptop Toshiba Tecra M2 with construction of wireless support. I want to be able to share the internet connection which comes in the workstation down. I guess that my options for the workstation are to use a DSL wireless modem to share the internet connection or to use a PCI card in my computer. I tried them both.

    I first tried to set up an infra mode network with the laptop using a LinksysWAG54G which was connected to the telephone line and a computer. But the problem with that I was t couldn't do accept the subnet mask that my ISP (Lixxus) provided 255.255.255.255 (PPoA). This modem has all the masks of SN in a dropdown list, but mine isn't in this list. I returned this modem.

    I tried then set up an adhoc network purchase buy a PCI Wireless card for my desktop, and internet connection sharing etc. on the workstation. However, while it worked, and I could see the desktop of my laptop, the problem has been the wireless range. The signal disappear when I wore the laptop in the back room on the first floor. It would have been a distance of 10 meters in a straight line between the laptop and desktop. There are walls two bricks and a floor between the two machines. It seemed hopeless, so I sent the PCI card.

    I'm not sure what to try next.

    Any suggestions that I could try next?

    Suggested hardware?

    Signal strength - could the problem be that the antenna in portable insufficient Tosh - it too small?

    Hello

    I have the same situation at home. The best solution for this is to use the wireless router. Here you have the possibility to connect several computers desktop or laptop. In this case the configuration of wireless connection is very easy and it works fine. I also use it at home and in front of my house with no problems.

  • 2000-2314TU HP: not able to connect to the LAN and Wireless network

    Hello

    I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?

    You are the very welcome.

  • When I connect to the wireless network, it shows that I'm offline and I can't open a webpage as Google or Skype.

    Original title: network Ethernet NIC network adapter wireless network device

    I WAS USING MY COMPUTER, THEN HE WAS BLOCKED COMPLETELY, SO I HAD TO REINSTAL IT AGAIN, BUT WHEN IREINSTALIT AGAIN ONCE I STARTED TO HAVE A PROBLEM THAT IS (WHEN I CONECT TO WIRLESS AFTER 5 MIN SHOWES TI I'M OFFLINE AND I CAN'T OPEN ANY PAGE ON GOOGLE OR EVEN MY SKYPE) ALTHOUGH I AM STII ONLINE, SO I HAVE TO SWITCH IT OFF AND TURN IT BACK ON, CAN YOU HELP ME FIX IT, THANKS

    Hello

    1. what version of windows you are using on the computer?
    2. do you get any error code or error message?
    3 were there any hardware or software changes made on the computer before this problem?
     
    See the help article and check if it helps.
     
     
    Response with more information to help you.
  • Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

    hardware device

    my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

    Hello

    What operating system installed on the computer?

    Note: Look for errors in the network card device manager.

    Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

    Using the troubleshooter from network in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2:

    He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

    For more information, follow the below mentioned article:

    Set up a wireless router:

    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

    Follow the below mentioned articles and see if they help you:

    Set up a wireless network:

    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

    Wi - Fi and in Windows network connection issues:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Wireless network card: frequently asked questions:

    http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  • My computer is constantly acquiring network address for wired connections and wireless.

    my computer is constantly acquiring network address

    my computer is constantly acquiring network address wired and wireless. Note my Dell inspiron B130, Windows xp 32-bit windows 8. also under the management of the network, the details are 0.0.0.0 IP address 0.0.0.0 assigned by dhcp and active ipv6 subnet mask. Thank you

    Hello

    1. what exactly is the problem?
    2. are you able to go online?
    3. have you made changes on the computer before this problem?

    The following articles can be useful if you are having a problem with internet connectivity.
    How to troubleshoot possible causes of Internet connection problems in Windows XP
    http://support.Microsoft.com/kb/314095
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

Maybe you are looking for

  • Info on a new worm (Mytob.GV)

    Hello forum users I found a very interesting article about a new worm that can be very dangerous for your system. The Spanish software provider antivirus Panda software warns against a new variant of the Mytob Wurms. More data on this worm, you can f

  • Copy and paste effects between clips

    Is it possible to copy and paste effects between clips and overwrite the previous settings?  When I just stick your ads in existing settings, which means that I have to delete everything before gluing

  • How do I know if I have a keylogger

    Yesterday, I got a pop up on Safari which even told me and told me to call a number of Time Warner (my broadband provider), because I had malicious software.  He had nothing to click on, but it was a box that says "do not show this" and I clicked on

  • NVIDIA GeForce GT 85 - error code 43

    I'm not trusting Microsoft more like today I installed an update for the graphics card NVIDIA GeForce GT 85 and stopped Vista map function with error 43.  I never install optional updates and will buy a Mac computer next time I get a new computer.  I

  • Add bulk users to a group

    Is it possible using which you can add users in bulk to a group using: Web client Fat client PowerShell--> provide the cmdlet and the full syntax