Windows 7 sees not hard drive (sata)

Similar Questions

• Windows 7 sees no hard drive in the installation program

  MB: Gigabyte GA-X58A-UD3R

  BIOS recognizes the hard drive SATA and IDE is set.

  HD is installed in channel 6.

  Hard drive was working fine before I reformated using the installation disc and am not convinced that it is a hard drive failure.

  I can access the drive on CMD in the full version of Windows 7 dvd.

  I reformatted the hard drive from the RAW to NTFS format, but did not have any partitioning prior to formatting. I don't know how to partition on a Virgin HD no OS.

  The MB is assigned to the IDE is really a driver problem?

  It is as if Windows 7 does not recognize it as a hard drive.

  Photo 1 (installation of windows 7)

  Photo 2 (diskpart cmd.exe)

  I'm totally ideas and I think it's a simple solution that I don't know how or where to look.

  He solved.

  What I did this from the site Microsoft...

  Method 8: Use the Diskpart.exe utility to clean the disk, and then run the Windows Installer again

  If you have tried all the methods that are listed in this section and the problem persists, use the Diskpart.exe utility to clean the disk, and then run the Windows Setup program again.

  Note Use this method only if you want to perform a new installation of Windows. When you clean the hard disk, it is formatted. All data on the hard drive and all the partitions are deleted permanently. We strongly recommend that you back up the files on the hard disk before cleaning the disc.

  To use the Diskpart.exe utility to clean the hard disk, follow these steps:

  1. Insert the DVD into the DVD drive.
  2. On the disk selection screen, press SHIFT + F10. A command prompt window opens.
  3. Type diskpart and press ENTER to open the diskpart tool.
  4. Type list disk and press ENTER. A list of available hard disks.
  5. Drive of salt of type number , and then press ENTER. number is the number of the hard disk you want to clean. The hard drive is now selected.
  6. Type det disk, and then press ENTER. A list of partitions on the hard disk. This information is used to verify that the correct drive is selected.
  7. Make sure that the disk does not contain required data, type clean all and then press ENTER to clean the disk. All partitions and all data on the disc is removed entirely.
  8. Type exit and press ENTER to close the diskpart tool.
  9. Close the command prompt window.
  10. Click the Refresh button to update the disk selection screen. This step lists the disk. (I installed the driver in this step)
  11. Restarted the computer because the interface was giving me errors.
  12. Run Windows Setup to perform a new installation of Windows.

• I got my product key Windows 7 enabled on my computer, then my hard drive crashed, so I had to reinstall Windows on a new hard drive. He is now not letting me turn it back on.

  original title: activation problem

  -I got my product key Windows 7 enabled on my computer, then my hard drive crashed, so I had to reinstall Windows on a new hard drive.  He is now not letting me turn it back on.  What should I do?  I don't want my computer or Microsoft thinks I use a version of Windows

  It is Windows 7 Home Premium, and I my here in front of me activation code.  But it is to say that it is not valid.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• How can I empty the Windows installation on my hard drive?

  How can I empty the Windows installation on my hard drive, please?  I was going to re - install, then I changed my mind.
  Now, every time that I reboot, instead of launching Windows XP Pro, it try to run Windows installation.  The installation program appears as a second menu item under "Windows XP Pro" on the black screen at launch.

  How can I remove it from the startup screen and flush it out of my system?

  Any correction, automated for this?

  Thank you.

  It is difficult to determine what you did, but the symptoms you describe can be eliminated by editing the boot.ini file (you can also make things really difficult if you make a mistake when you edit the boot.ini file, so be careful).  Will not be "flush out the Windows installation" of your system, but it will stop the menu from appearing at startup time.

  See http://support.microsoft.com/kb/289022

  Your boot.ini file probably has a second line in the [operating systems] section.  Make sure that you delete only the line that points to the installation routine.

• Windows 7 computer portable HARD drive connected to a professional XP S3

  Windows 7 computer portable HARD drive connected via USB to a desktop XP Professional SP3 PC.

  PC shows the folders, I have access to the folder of Photos, but cannot access the Documents folder where files I need. I tried to share the folder, but it does not work.

  Any suggestions please?

  Probably, this can be corrected by taking possession of these files / directories.  Once you do this, however, you will find probably your permissions in disarray try to re - install the drive in your computer to Windows 7...

  "How appropriate a file or a folder in Windows XP"

  <>http://support.Microsoft.com/kb/308421 >

  HTH,

  JW

• Has had a phone call claiming to be "Windows", claiming that my hard drive was contamintaed with viruses (s). Is this valid?

  Call from Microsoft

  Has had a phone call claiming to be "Windows", claiming that my hard drive was contamintaed with virus (s)

  They then read me coorrectly code full windows of my windows disc cover, sounds scary!

  Fake phone calls to technical support

  Calls unrequested telephone of this nature are almost always a common scam. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment.

  Please see:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  Microsoft issues never not solicited for phone calls of support or security.

  These types of callers can use completely fictitious names or bogusly claim to be of real companies other than Microsoft as well.

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• Installation of Java has wiped out everything on the computer receiver error message: "windows-delayed write filed" hard drive failure ' x 5

  I installed java and it wiped out my computer, no program, no picures, no parameters on the left? He even wiped my restore points.

  I tried to restore to the point of installation of java, but alas nothing has happened, now I get all these boxes warning "windows-delayed write filed" hard drive failure ' x 5 and also warning mean my HDD is in peril of the personal data.  This single icon left on my desk is the internet explore and internet runs very slowly, I am reluctant to sign something incase, there a virus or something.

  Please help me!

  Hi Carolinelightfoot,

  This error message occurs when the system could not read and write data to the registry file. The error indicates a problem with the registry.

  Method 1:

  You can run a Checkdisk to see if there are drive errors that can cause this problem.

  Check your hard drive for errors

  Note: When you run the disk check, there is a chance of losing the data that you can take a backup of important data before you run checkdisk.

  Method 2:

  You can also try to boot from a full version of Windows Vista installation disc and try to perform a restore of the system to WinRE (Windows Recovery Environment)

  What are the system recovery options in Windows Vista?

  Hope this information is useful.

• How to install windows on a new hard drive

  I lost my hard drive and buy a new.  I do not have my disk but have a product code valid for my computer.   How to install windows on a new hard drive

  OT:

  Windows 7 home premium edition

  You will need to borrow a disc of Windows 7 Home Edition Premium or borrow a disk upgrade or full version retail and create a bootable copy with option to select Windows 7 Home Premium during installation. To learn more:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

• Second activation of Windows 7 after formatting hard drive

  I recently installed Windows 7 on my desktop PC and activated.  However, due to display problems (which is happened because of Lightning), the technician computer that provided the proposed Windows 7 reformat the hard drive and I agreed.  After formatting, Windows 7 has been installed from the original disk even.  I am not able to activate now even after providing the correct product id.  The message says that I have to buy a new license!

  Another curious aspect: I tried a day before activation, which asked me to download a software (from Microsoft of course).  I followed the instructions, and after a lot of screens, I thought I found 'successful activation.  However, booting my PC this morning, I find that I have 0 days for activation and that he chose the option "Activate now" with the same result (after providing the correct product id).

  Add to my great surprise, after restarting the PC, he said now "27 days to activate. Activate Windows now.

  Could someone please guide me how to actually activate my Windows 7 now?  (Either by the way, I had also installed MS Office 2007 before reformatting and activated.  After reformatting, Office was installed from the same disc again and I had no problems activating the office...)

  How to activate Windows 7 manually
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone and wait for someone to help you with the activation. (Tell the person what happened to your computer).

  Also:
  How to activate Windows 7 by phone
  http://support.Microsoft.com/default.aspx/KB/950929/en=us
  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Can I transfer the license of windows 8 from a hard drive die on new hard drive?

  I have PC and windows license 8.

  A week before, the hard drive of my pc which contained the C drive was dead because bad sector.

  I want to buy the new hard drive and want to transfer the windows license 8 old hard drive.

  Is this possible?

  I read an article which is only possible if you format the old hardisk first.

  But in my case, I can't turn on my old hardisk to format.

  I have PC and windows license 8.

  A week before, the hard drive of my pc which contained the C drive was dead because bad sector.

  I want to buy the new hard drive and want to transfer the windows license 8 old hard drive.

  Is this possible?

  I read an article which is only possible if you format the old hardisk first.

  But in my case, I can't turn on my old hardisk to format.

  The OEM of Windows 8.0/8.1 license is related to the motherboard and not the hard drive, so you can reuse the new hard disk provided his will in the same computer.

  About the old drive you need not to worry about the formatting as the old disk can never be reused. If you want to be sure, you can physically break the old disk with a hammer before throwing.

  Use Windows 8.1 media tool on another PC to prepare Windows 8.1 with updated installation media 1:

  http://Windows.Microsoft.com/en-GB/Windows-8/create-reset-refresh-media

• CQ62-423NR: can I attach a hard drive Sata III of PNY CS2211 for my laptop CQ62-423NR using usb adapter?

  Can I attach a hard drive Sata III of PNY CS2211 for my laptop CQ62-423NR using usb adapter? I have the maximum memory (8 GB)

  Hello

  Yes, you can put any SDS/disc HARD SATA to USB HDD enclosure and you can use it as any HARD drive externally.

  Kind regards.

• How can I reinstall windows from my old hard drive on a new solid state drive?

  I'm considering buying an SSD and want to reinstall windows from my original hard drive (there is only a recovery partition on the original hard disk and no drive of the Windows operating system).  Anyone can guide me through the process or do I buy a new copy of Windows.

  Hello

  You can create a recovery from your old hard drive disk, or you need to contact HP technical support and order the part or click on the link given below on a command line drive by yourself.

  Create a set of recovery disks operating system

  Order of the recovery disc for Windows 7, Vista or XP

  
  

  
  

• Windows vista 683 gb hard drive full of only the dates, how can I clean it? Fixed thanks

  Windows vista 683 gb hard drive full of only the dates, how can I clean it? I have 9 GB of free space. PC still allows me to watch Netflixs. Cool

  You are welcome.

  See you soon.

• Installation of Windows on a new hard drive

  I have a computer I want to get a new, more large hard drive. The vehicle currently has Windows Vista installed on it and the hard drive still works, I just need more space. What should I do to install Windows on the new drive? I will use the installation disc that came with the computer. If I get out the old hard drive, install a new one, put Windows on the new, then format the old one? Basically, I want to avoid having Windows installed on two hard drives to work.

  Hello

  the steps you have mentioned are correct:

  take out the old hard disk - the new drive hard install - reinstall vista - old erase hard drive

  You can then use a the old hard drive to backup your data

  and read too much about the displacement of the full to avoid you operating system having to load data and programs again. but then you still wipe the old disk

  It might make you save time and effort:

  hard drive manufacturers will normally provide the cloning software to move your operating system installed from the old to the new hard disk

  Search for information on this subject on their Web site

  If you have vista business or ultimate, you can use the builtin vista complete PC Backup to move

  read the information below

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  or if you have vista home version you'll need 3rd party software

  link below is an example of this:

  http://www.Acronis.com/homecomputing/products/TrueImage/index.html