Windows 7 Setup cannot create vCenter Server Directory Services instance

Similar Questions

• vCenter install error: Error 25003 Setup cannot create vCenter Server repository

  Hello

  I build vCenter server install 5.5.0U1C with the two server model where the instance a host DB and others welcome rest the vCenter Binaries.Below is the error that I got when running vCenter

  I ran the query

  SELECT CASE WHEN 'A' = 'a' THEN 'NOT CASE SENSITIVE' ELSE 'CASE SENSITIVE' END

  
  

  I got back as "NOT case sensitive.

  
  

  But if I'm correct error it says precisely because of the failure as "the database is installed using insensitive case" that proves this query.

  
  

  I fell the Mode Case Insensitive mode case-sensitive mode by changing the ranking "SQL_Latin1_General_CP1_CS_AS'.

  
  

  I have this time received the error

  
  

  

  
  

  I have no idea which has now gone wrong make install failed.

  
  

  BTW, the version of the Client on the remote DB server and application server are the same and I use MS SQL 2012 SP1 with windows 2008 R2 SP1 on windows OS both side.

  
  

  Please help me find the solution, I have really now clueless with the cause of it.

  
  

  
  

  Thanks in advance

  
  

  BR,

  
  

  MG
  

  Nevermind, I got this problem fixed by the server being destruction and reconstruction new virtual machine and install this on it.

• error barsigner: cannot create application data directory

  Hello, I got this error when I try to sing my application:

  error barsigner: cannot create application data directory

  I tried everything: as an administrator, change the directory security and so on.

  I get this error with the command line and from Flash Builder.

  I have v.0.9.1 SDK

  I have my application ready to be submitted, but cannot understand this error, I would be very disappointed to not meet the deadline of March 31 :-/

  Any clue? Thank you

  Really 0.9.1? could sign you your application with this version? have you tried the SDK 0.9.4?

• Active Services Web Directory has encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance

  VCenter Server 4.1, I installed it on a physical machine. This is the error message that appears whenever I try to follow what is happening every 1 min event viewer.

  Error:

  role for users: log name: Active Directory Web Services

  Source: ADWS

  Date: 2010-07-28 15:55:21

  Event ID: 1209

  Task category: Instance ADWS events

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer: wwubmw.williamwoods.local

  Description:

  Services Web Active Directory encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance.  Services Web Active Directory will try again this operation regularly.  At the same time, this body will be ignored.

  Instance name: ADAM_VMwareVCMSDS

  The event XML:

  The OS is Windows 2008 R2. What should I do to solve the problem.

  Thanks for the reference Troy

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Gregg Robertson, VCP3, 4, MCSE, MCSA, MCTS, MCITP

• Setup cannot create a new partition system or locate an existing system partition error on installing windows 7

  I am trying to install windows 7 on my emachines T6520 in with a single hard drive. so far, I can get to where it says select the partition. so I select the single partition it and it gives me this error "cannot create a new partition system or locate an install" ive tried EVERYTHING. I have only plugged in the USB is a MI to help install windows from. This time the boot priority is hard disk and then cd rom. ive google search for days and nothing helps. I have the windows installation disc, but whenever I boot from the disc it loads the configuration files and then right until he finishes it says "unexpected error" and I can reboot or turn off the computer, that's why im starting on a USB key. Ive also tried DBAN and no luck. Help, please!

  Hello

  I suggest you view and perform the steps from the following link to install Windows 7.

  Installation and reinstallation of Windows 7

  Always if you have any problems in installing Windows 7 perform the steps from the following link.

  Solving Windows installation problems

• Satellite C55-A-1JL - 10 Windows sound driver - cannot create the instance of the APO

  Hello.

  I have Toshiba Satellite C55 - A (PSCGAE).

  Yesterday, I've updated my Windows 8.1 to Windows 10 and install the drivers.

  Version 1.2.41.0 of his Studio of DTS (32/64 bit).

  When I try to open this application I have error: cannot create the instance APO.

  What should I do?

  You need to update the audio driver (I guess that your device uses IDT HD audio card)
  But double check in Device Manager, then expand the section audio controllers, video and game to find out what kind of sound card you have.

  DTS Studio seems to be already aware...

  So I advise you to go to the Device Manager and uninstall its drivers Associates
  After reboot new, Windows 10 must check updates automatically... in case that it does not happen, you can try to manually start the update of the Device Manager.

• Windows 7 Advisor - cannot reach the server

  I installed the Windows 7 advisor and both yesterday and today, he cannot reach the server updates - or before scanning - so it does not work for me.  Any ideas? The server is down? I can access many other things!

  It seems to run normally today.

• Cannot change "vCenter Server Address"

  Hello

  After change vCenter server of Windows to 6.0 device

  vSphere replication appliance 6.0 do not work.

  I try change "vCenter Server Address:" to the new IP address, but when I press "Save and restart the service", I get the error:

  "Can't get the SSL certificate: Bad server response; a vCenter server listens on the given host and port? »

  and the new unregistered IP address.

  Hello

  OK, so your problem is the browser's cache. Please close all instances of your browser and then open firefox own all hides browser and open the VAMI RV user interface and go to the Configuration tab.

  PS: Do NOT use IE

  Thank you

  Dzhem

• version of vCenter Ops 5 Enterprise Windows - how to connect to vCenter Server?

  IM stumped...

  Ive installed vCenter Ops Enterprise edition on a Server Windows, its place and work.

  The next step for me would be to point to our vCenter servers... I can't understand how do... anyone done this?

  I need a reading vCenter server adapter, but I can't seem to a fine.

  John, file a support request... Apparently, he must get to you.

• Cannot download vCenter Server

  I signed up for the VCP exam on 10 August.  I'm trying to set up my test environment. I have problems.  Time is running out.  Help, please!

  I downloaded and installed VMware Workstation, ESX and ESXi.  I can't be able to download vCenter Server.

  I go to: http://downloads.VMware.com/d/

  I click on: VMware vSphere 4

  Then under "Standard" or "Advanced", I click on: VMware vCenter Server 4.1 and modules.

  Then I click on the download button for the version 4.1

  I get: "sorry, at the moment you cannot download VMware vCenter Server 4.1 and modules.

  If I go to any ESX instances that I installed and click on the web page: download VMware vCenter

  It goes through a similar process, but has sign me in with my e-mail address and password VMware on the way.

  Same result: "sorry, at the moment you cannot download VMware vCenter Server 4.1 and modules.

  Can you get it someone please let me now how do I get the Server vCenter?

  Thank you

  -dog

  Usually, when you sign up for a trial, the download will be available for 60 days (same amount of time as the trial license). If you have not subscribed to the assessment, you can do so at http://www.vmware.com/go/tryvsphere

  If you have already done this, you should consider doing the same operation with a different e-mail account, ISOs will be available on this new account for more than 60 days.

  VMware allows test or with the licenses associated with accounts to download any software.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• Cannot get vCenter To Start Services!

  For the reasons that I'm don't understand that I can't get to my sever via the client vSphere vSphere.  When I try to login, I get this error:

  vSphere County Client connects with the VirtualCenter Server "ip of the server here.

  Details: A connection failure has occurred (unable to connect to a remote server)

  To investigate the problem, I noticed that two services configured to start automatically are not running at all.  Services are; VMware vCenter Management WebServicesand VMware VirtualCenter Server.  When I manually start the service "VMware VirtualCenter Server" I get this error:

  "Windows has no start VMware VirtualCenter Server on the Local computer."  For more information, see the system event log.  If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code. »

  Here are the mistakes of the event on the vSphere server log:

  Log name: System

  Source: Service Control Manager Eventlog Provider

  Event ID: 7024

  Message: The VMware VirtualCenter Server service is stopped with the error service special 2 (0x2).

  Log name: Application

  Source: VMware VirtualCenter Server

  Event ID: 1000

  Message: The description for event ID 1000 from source VMware VirtualCenter Server is not found.  Either the component that triggers this event is not installed on your local computer or the installation is corrupted.  You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included with the event.

  Force the closure of VMware VirtualCenter now, the message resource is present but the message is not in the string/message table.

  -

  ---

  List of products VMware & installed Versions:

  • vCenter Orchestrator, version 4.0.1.4502

  • VMware Infrastructure Client 2.5, version 2.5.0.64238

  • VMware vCenter collector Service, version 3.0.32.31376

  • VMware vCenter Converter, version 4.1.0.5213

  • VMware vCenter Guided Consolidation, version 4.0.0.10021

  • VMware vCenter Server, version 4.0.0.10021

  Running 2 servers ESX 4 and 1 ESX 3.5 server.

  If anyone has any ideas please, it drives me crazy.  Oh and thanks for reading this far.

  You can not have IIS running, it will conflict with port 80

  http://KB.VMware.com/kb/4824652

• Cannot create agents on the DB Instance in Foglight 5.6.4

  Hello

  We use Foglight 5.6.4 Infra-monitoring.

  We monitor Web, App and DB servers using the tool for different applications. In the Assistant database discovery database dashboard, we find all the instances running on a particular host of DB. We are able to establish connectivity between the host and the instance by providing credentials in the wizard.

  The question here is, when we try to follow the proceedings by creating an agent, it throws an error ' ERROR CREATING AGENT'. We checked the credentials as well as with the relevant team, but we are unable to create the agent on the instance.

  Please advise on the same.

  Kind regards

  Guenoun

  Cool, glad to help you.

  Please mark this as answered.

• How cleen install Windows 7 Ultimate on HP 2000-120CA - Windows Setup cannot create partition...

  Greetings,

  I deleted all partitions on my HP 2000-120CA with acronis Disk Director... and you try to install Windows 7 Ultimate. I can't create partition with installation - just load the driver... I try to load the http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#2 drivers, didn't work...

  Please any suggestions...

  p.s. - Sorry for my bad English

  Solved!

  I finally get to Support HP recovery disks...

  Thanks for the suggestions...

• Windows XP Setup cannot find hard drive

  Running VMWare Fusion 2.01 (128865).

  I'm doing a repair of my installation of Windows XP Service Pack 3 on the VM.  I am able to boot from the CD and start the Windows Setup successfully.

  However, installing Windows says it is unable to find a hard drive and cannot continue.

  When I hit F3 and restart the computer, the virtual machine load XP on the virtual hard disk as before.

  How can I get the Windows installation to recognize my virtual hard disk and do a repair?

  Take a look at the following...

  If the virtual machine was created using Windows Installer Easy or has a VMware SCSI virtual hard disk, you must download the Drivers SCSI VMware and select the file vmscsi - 1.2.0.4.flp like the floppy drive of the virtual machine in the Virtual Machine settings sheet of the target. This disk image contains the necessary VMware SCSI disk drivers when booting with the Windows XP CD and you will need to press F6 when it says "press F6 if you need to install...". "at the bottom of the Virtual Machine window and it will then invite the driver after he continues to load additional files. Just follow the guests.

  BTW you may need to press the Fn + F6 etc. and this can be changed in system preferences > keyboard & mouse > keyboard > use all F1, F2, etc...

  If the Virtual Machine is not initiating the CD/DVD or ISO Image, and then select the CD-ROM in the Boot Menu.

  Engage the Boot Menu and select the CD-ROM drive...

  The bottom of the virtual machine just above the status bar after the Virtual Machine is started, it has...

  "Press F2 to enter SETUP, F12 for the start-up network, ESC for Boot Menu"

  On the status bar, it features...

  'To direct entry to this virtual machine, click inside the window.'

  BIOS flashing by is very fast so you need to work quickly however give it a try and if the Start Menu cannot be higher then the configuration of the Virtual Machine file .vmx must be edited to slow the STATION and or change the boot order.

  OK, click the big Play button on the screen of the virtual machine, and then quickly mouse click in the Virtual Machine screen and then press the ESC key to bring up the Start Menu and select the CD-ROM drive. If it boots the CD very well and if the Boot Menu does not appear, because he goes just to quick access and then try again or...

  Watch the Boot Delay section in the current user's Guide to VMware Fusion and the section of the virtual machine files of A Beginner's Guide to VMware Fusion on when the configuration of the Virtual Machine's .vmx file is and add the following lines to the file. TextEdit can be used to edit the .vmx file.

  To give more time to indulge, the Start Menu Add the following...

  bios.bootDelay = "3000".

  For, once, force the VM in the BIOS to change the Boot order in the BIOS if the CD-ROM is first add the following...

  bios.forceSetupOnce = 'TRUE '.

  Note: by default in the normal Fusion 1.x virtual Fusion function file are created in the folder "~/Documents/Virtual Machines" and according to host operating system version and or Fusion worm. There may be a .localized after Virtual Machines although by default, this extension is not visible in the Finder.

  ~ Is your Home Directory.

  The files that make up the virtual machine are placed in a folder (aka Bundle and or packing) bearing the extension '.vmwarevm' which, by default, this extension is not visible in the Finder.

  Example: "~/Documents/Virtual XP.vmwarevm Machines/Windows" in the Finder would just resemble an icon named "Windows XP."

  To view the contents of the entire file "Windows XP.vmwarevm" ctrl-click (or right-click) on the "Windows XP" icon and select Show the contents of the package.

  To change the configuration file of .vmx ctrl-click (or right-click) on the "Windows XP.vmx" file and select open with > choose another... then in Application choose TextEdit.

  Note: If you use Firefox do not copy and paste the parameters if TextEdit unless you copy only the exact line and nothing else in the case, use an editor such as TextWrangler.

  Also...

  When you use utility disk in order to have a bootable ISO Image, you must select Master CD/DVD without encryption in which case by default, it will have an extension .cdr file and in version 1.1 of the merger and later does not need to be changed in .iso, although one can if one chooses to. A default .dmg image is compressed and is not bootable, as an uncompressed .dmg will start if changed in .iso and of course the source CD/DVD should be bootable in the first place.

  To create an ISO Image using disk utility...

  1 insert the CD or DVD disc into the optical drive of your computer.

  2. open disk utility (/ Applications/Utilities/Disk utility).

  3. Select the CD or DVD drive in the list of disks and volumes.

  4. Choose file > new > "Disk Image from (name of the disc)."

  5. type a name for the disk image.

  6. choose "DVD/CD master" from the Image Format pop-up menu.

  7 choose "none" from the encryption pop-up menu.

  8. click on save.

  Also...

  Take a look on: VMware Fusion menu bar > help > VMware Fusion help > manage virtual machine > configure the CD/DVD drive

• Error 5 access denied, cannot create the installation directory

  Please can someone help?
  I can't install anything on my PC!

  As this question by another user: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/error-5-access-denied-setup-unable-to-create-the/e9e9ad9b-9a81-4a99-962e-3e5f0708a855
  When I try to install anything, I get the error:
  ---------------------------

  Error

  ---------------------------

  Setup could not create the directory "C:\Temp\is-27LQO.tmp".

  Error 5: Access is denied.

  ---------------------------

  Ok

  ---------------------------
  no solution I can find online won't work! (the name of the .tmp file changes every time)

  I tried to change my account temporarily in a new folder I created, C:\Temp, same result. I tried as admin, same result, I tried with UAC on and outside, same result. Create a new user on the PC, same result. Check the permissions on the folder (inherited), removed the permissions & re-added, same result. This seems to be an exe that I try to run to install something, it's fine by week or 2 ago.
  Any help appreciated.

  Take a look at the messages that appear in the right-hand side of the screen when you open your thread. They deal with the same issue.

  

  Give full control permission

  C:\temp folder and

  C:\Users\Username\AppData\Local\Temp

  Reason

  Malware blocked your permissions for these two folders (and subfolders)

  Malwarebytes repair this problem.

  These two records are essential to the installation and execution of your programs.