vCenter install error: Error 25003 Setup cannot create vCenter Server repository

Similar Questions

• While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  KB952155 Setup Error.

  While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3

  Eivind Aakhus Hello,

  If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.

  Follow these steps to activate the ActiveX module.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  b. click Tools, point to manage add-ons and then click Enable or disable add-ons.

  c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.

  d. choose the one you want to activate, and then select Enable.

• When Microsoft Excel loads the following error occurs: Error 1406 Setup cannot write the value in the \xlsx registry key.

  I have Windows XP on a PC, I bought at the beginning of 2009.  I have been using Microsoft Office applications with no problems until now.  When I try to open Excel, the following events occur: 1) a presentation box appears and poster - "Please wait while the window configures Microsoft Office Home and Student 2007.  Collection of the required information.   2nd) another box displays the following message: Error 1406 Setup cannot write the value in the \xlsx registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, see PSS10R. CHM.
  3rd, the next area said cancel, start over or ignore.   Retry and ignore just redisplays the same message box again.  When I click Cancel, the following error message is displayed - fatal error during installation.   I do not understand why this is happening since 1) I've been using Excel for quite a while and 2) I'm not trying to install office as it was installed on my PC when it came from the manufacturer (Dell).  Also, I have no problem with the opening of other Office programs.  I am the only user on this computer.  Help, please!  Thank you, Dennis

  Okie dokie.

  Well I dug on the web and found someone with the same problem, and they said that when they have disabled "McAfee VirusScan 8.5 Access Protection", this error has disappeared. If this applies to you, give it a whirl if you wish.

  But the best support that I found came from this website: http://support.microsoft.com/kb/838687. The jist of it is (trying to fix it yourself):
  Fix it myself to fix this problem yourself, follow these steps:

  1. Log the computer by using an administrator user account.
  2. Start Microsoft Windows Explorer.
  3. On the Tools menu, click Folder Options.
  4. Click the view tab.
  5. Under hidden files and folders, click Show hidden folders and files.
  6. Clear the Hide extensions for known file types check box, and then click OK.
  7. Open the following folder: C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data\
  8. If you are running Office 2003, right-click Opa11.dat, and then click Properties. If you are running Office XP, right-click Data.dat, and then click Properties.
  9. Click the Security tab.
  10. Click Advanced.
  11. Click the permissions tab.
  12. Click to select everyone in the list entered permissions and then click change.
  13. Click to select the full control check box.
  14. Click OK three times. If these steps do not resolve this issue, delete the Opa11.dat file or the Data.dat file in the following folder and then restart an Office 2003 program or an Office XP program:
      C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data

      If this does not work for you, I would take my installation CD< completely="" uninstall="" microsoft="" excel="" (or="" any="" other="" problems="" that="" are="" giving="" you="" this="" error),="" then="" install="" microsoft's="" windows="" installer="" cleanup="" utility="" (which="" completely="" removes="" all="" stuff="" pertaining="" to="" whichever="" program="" you="" delete,="" for="" you,="" excel)="" and="" then="" reinstall="" microsoft="" excel.="" this="" utility="" program="" is="" really="" powerful,="" and="" you="" can="" download="" your="" copy="" from="">http://support.microsoft.com/kb/290301.

      So, here are three options for you to try. I hope one works for you - let me know it to be.

  -Carson

  P.S. - KC Chiefs? Colts all the way! :)

• Cannot open the file, I get the runtime error 429 ActiveV cannot create object

  I have sved a folder tax, but every time I try to open it, the runtime error 429 ActiveX cannot create... just until she made 3 times and tried all of the suggestions for correct... help!

  Finally, I contacted Vernisoft... signed up with them on top of a prior problem when I was hacked and they finally fixed it... after 3 hours.  In short, they have finally installed IE8 and the Run-time error notice disappeared and I was able to record and transmit my record.  No problem since so far.

• Error Lightroom: You cannot create the required folder

  Hello

  I have an error with the Lightroom program. I installed from application cloud creative and seems to be all right. When I open the program I get the error:

  There was an internal error. You cannot create the required folder: / users / lived / Library / Application Support / Adobe / Lightroom / metadata Presets.

  

  Report an error by CAT, but apparently there are problems and not receive messages from operators. They worked on my files internally and now have problems because the app says that some files cannot be synchronized.

  Can someone help me? Please

  Hi viviang,

  Greetings!

  There is a permission problem.

  Try to give permissions to both libraries (library system & user library) and the Applications folder.

  For the Applications folder

  ---------------------------------

  Open Finder

  On the left panel, you will find applications-> folder, right-click on this (CTRL + click) and then click on read the information.

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Done with file applications here.

  For the user's library

  -----------------------

  Open Finder

  Click OK at the top of the page and select 'go to folder '.

  Type "~ / Library ' and press go

  Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Made with the user here library folder.

  For the library system

  ----------------------------

  Open Finder

  Click OK at the top of the page and select 'go to folder '.

  Type "/ Library" and press go

  Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Done with the record of the library system here.

  Please let me know if it works

  Please note: do not just right-click on MAC HD complete and provide all permissions that can bring the MAC in any startup mode.

  Concerning

  Jitendra Khatwani

• Setup cannot create a new partition system or locate an existing system partition error on installing windows 7

  I am trying to install windows 7 on my emachines T6520 in with a single hard drive. so far, I can get to where it says select the partition. so I select the single partition it and it gives me this error "cannot create a new partition system or locate an install" ive tried EVERYTHING. I have only plugged in the USB is a MI to help install windows from. This time the boot priority is hard disk and then cd rom. ive google search for days and nothing helps. I have the windows installation disc, but whenever I boot from the disc it loads the configuration files and then right until he finishes it says "unexpected error" and I can reboot or turn off the computer, that's why im starting on a USB key. Ive also tried DBAN and no luck. Help, please!

  Hello

  I suggest you view and perform the steps from the following link to install Windows 7.

  Installation and reinstallation of Windows 7

  Always if you have any problems in installing Windows 7 perform the steps from the following link.

  Solving Windows installation problems

• Receive error message when you install Windows 7 "Windows Setup cannot find a location to store temporary installation files.

  * original title - Windows Setup is unable to find a place to store temporary installation files. To install the winds make a partition on your startup disk has at least 686 MB free space *.

  Current operating system: Windows XP SP 3

  Windows 7:32 - bit Premimum Family Pack upgrade

  Hardware: Dell dimension 3000

  I read a number of different solutions for this problem.  None have worked.  I have 25 GB of free space on my C drive.  I formatted a dvd using the tool to download Windows 7 USB DVD.

  I ran sfc/scannow to repair system files

  I ran the suggestion to start installing from a command using D:/setup.exe /tempdrive:c window - it did not work.

  Does anyone have any other suggestions on how to perform this upgrade?

  Try these suggestions:

  Error 0 x 80070005 occurs if the upgrade doesn't have permission to the folder writecertain. Try the following steps:

  Reset permissions
  ============

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:

  off @echo

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause

  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
  8. you will see a window of type BACK treatment.

  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  If the same thing happens, move to the next step.

  Run the upgrade by using the built-in Administrator

  ================================

  1. click the button start-> all programs-> Accessories.

  2. right click on command prompt and select "run as Administrator".

  3. click on continue when user account control window appears.

  4 copy the following command and press ENTER:

  NET user administrator / Active: Yes

  5 restart the computer and then log on the computer of this administrator account.

  6. run the upgrade to windows 7.

  Error code 0 x 80070005 usually indicates that you don't have enough privileges or the operation is blocked. I know, some programs (Boot Camp on a Mac PC, etc.) is not compatible with Windows 7, if you have installed these programs on the computer, you may not be able to perform the upgrade.  You should uninstall these programs before upgrading. In addition, such a question may be related to UAC, I recommend you turn off UAC in Windows Vista, if you have installed security software, try uninstalling the security application as well.

  BTW, for your references, I found similar questions:

  Windows could not create a required installation folder. Error code: 0x80070005
  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/d04e9cf3-3eae-4A1F-a9f8-e2c5ed88d183/

  "Cannot create file" error when you try to install Windows 7
  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/3621e8cf-B2CE-479b-BEAC-08acc435a856

  Error 0 x 80070005 when upgrading to windows 7 from vista
  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/08986904-c822-4801-95a5-55ddd5aadcea/

  See also:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/cb679e27-f2e6-4CD5-b708-a4992cec5a9d

  CREDIT: Dale Qiao Microsoft, host and cdobbs releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Error "Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "When you try to install Windows.

  How can I configure my windows 7 after restoring my laptop to the factory conditians?

  My laptop had a blue screen and I couldn't get rid of it, I went into safe mode and restore my computer to factory conditions. When the computer says "the installation program starts services" you stop and I couldn't turn it back on for 15 minutes. When I turned on and tried to contained my setup, a message keeps poping up "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "But no mader, how many times I reboot my laptop, the same message appears. What should I do? I've restored my computer several times and never had this problem.

  You should try another recovery.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

• Error: System Restore cannot create a restore point.

  When you start System Restore, I get the error message from Web page "line: 166; "Error: unspecified error."  When I continue to try to create a new Restore Point, I get the message "System Restore cannot create a files.  Restart the computer, and restart System Restore. "Restart the computer does nothing for me, it simply again creates the same mistakes.

  Hello

  
   

  1. don't you get an error code along with this error message?
  2. have you done any change in software on the computer lately?
  3. have you installed a third-party backup software?
  4. do you have Norton or McAfee installed?

   

   

  Method 1.

  Try the steps listed in the article below and check.

  You cannot create a restore with a HighPoint driver installed
  http://support.Microsoft.com/?kbid=322246&SD=RMVP

  Method 2.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 3.
  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows XP Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows XP.
  e. when Windows starts, try using System Restore and verify.
   
  Hopt this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 Setup cannot create vCenter Server Directory Services instance

  When you try to install Vcenter server on a computer that is running windows 7 ultimate RC1 x 64 I get the error mentioned in the title.

  I read the discussions related to the error (http://communities.vmware.com/thread/211289), but could not find a solution.

  I gave all the NETWORK SERVICE permissions to the root of c:\, installed DSACLS to a domain controller, and AD LDS, copied LDIFDE services gave all toNETWORK SERVICE permissions more HKLM in the reg, disabled IPV6.

  The Machine is not part of a domain and the installation is for testing purposes.

  I would be grateful if someone could help me solve the problem!

  Windows 7 is not the same operating system as Windows Server 2008. The two systems are just based on the same core, but it's on how they manage the memory and processes.

  Client OS such as Windows XP, Vista and Windows 7 are not supported and vCenter cannot be installed on them.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• How to find duplicate keys found when error ORA-01452: cannot CREATE a UNIQUE INDEX.

  Hi gurus,

  I fall for this stupid error

  "cannot CREATE a UNIQUE INDEX; duplicate keys found.

  
  

  It is that the Unique Index key is composed of multiple columns

  CREATE A UNIQUE KEY001AUTORISATIONS_APPORT ON TFT_AUTORISATIONS_APPORT INDEX

  (AUT_APPORTEUR, AUT_AGENCE, AUT_PRODUIT, AUT_OPTION, AUT_TARIF, AUT_DATE_AUTORISATION)

  TABLESPACE KEYS_TFT NOPARALLEL NOLOGGING

  Now,.

  My question is, how to find duplicates keys blocking Index creation?

  Thanks if you can help

  Run this query to display the list of the duplicates already existing.

  Select AUT_APPORTEUR, AUT_AGENCE, AUT_PRODUIT, AUT_OPTION, AUT_TARIF, AUT_DATE_AUTORISATION, count (1) as cnt

  of TFT_AUTORISATIONS_APPORT

  Group

  AUT_APPORTEUR, AUT_AGENCE, AUT_PRODUIT, AUT_OPTION, AUT_TARIF, AUT_DATE_AUTORISATION

  view count (1) > 1

  Concerning

  NJ

• Error code: 0 x 57 while trying to install Office updates and error: 1402: Setup cannot Cholakov registry key

  Original title: failure of the updates to download and installation failed request due to registry

  Running XP PROFESSIONAL - two questions...

  • Automatic download of updates of window failed.

  Error code: 0x57A on

  1. Update of security for Microsoft Office Excel 2003 (KB2541025)
  2. Update for Microsoft Office 2003 (KB2539581)

  Error code: 0 x 80070652.

  1. Update of security for Microsoft Office 2003 (KB2509503)
  2. Update of security for Microsoft Office Excel 2003 (KB2541025)
  So I tried looking for a solution and came across a blog that said I should turn off my antivirus and try again.  Did not work.  The blog suggested that MS Office to uninstall and reinstall. So I did.  Uninstalled MS Professional and then tried to re - install...
  • message received Error - 1402

  The installation program cannot Cholakov registry key

  HKEY_LOCAL_MACHINE\SoftWare\Microsoft\CurrentVersion\Run\OptionalComponents\MSFS

  Can someone say if these two things are related or how to fix it.  I was stupid and didn't return to the top.

  Hi jbb59,
   
  -Can install you any other updates without any problems?
  -You receive this mCode error while trying to install Office updates only?
   
  Error 80070652 means that a previous installation is not completed successfully. Restart the computer usually solves this problem.
   
  Try the methods listed in the articles given below to resolve this issue:
   
  How to troubleshoot incidents to update your installation of Office on the Office Update Web site
   
  You receive an error message when you install an Office program or you open an Office program or a document

• Try to install the creative cloud, but it keeps giving me the error message 'Setup cannot initialize' Please help

  Setup could not initialize... help me please download the creative cloud. I get this error message.

  Try to perform the steps mentioned on

  https://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• I get error message "Setup cannot initialize.

  I use windows 7 SP2, I recently got an error message saying "Missing Application manager. so I downloaded the new application manager and when I try to start the installer it says "Installer failed to initialize". I tried to use cc cleaner and uninstalled all my adobe apps but did not work. Now when I try to re install my apps, I get the same error on all of them.

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Æ 6 errors in Maverick: cannot create files in the library.  How can I fix it?

  Initially, I installed CS6 Master Collection on Snow Leopard and everything was great.  I just bought a new iMac with Maverick.  I reinstalled my Master Collection CS6 and make me now 2 major mistakes when I open After Effects.  I've updated AE to 11.0.4.2

  First error reads as follows:

  After effects of warning: directory ' / users/will/Library/Preferences/Adobe/After Effects/11.0/Adobe after effects Disk Cache - William Brook iMac (3) .noindex ' could not be created. Please check the rights of protection or permission from parent directory.

  The second error reads as follows:

  After effects error: unable to write to Disk Cache folder, cache so disk will be disabled. Please check your settings in the media and Disk Cache preferences.

  I've updated all programs of the suite.  Everything seems to work very well with others, After Effects only seems to have a (major) problem.

  I seem to be able to run AE, but it cannot save the project I'm working on that.

  This is the main program, I need to use.  Any advice on how I can solve this glitch to Maverick?

  Yes, set the Preferences folder to be writeable by all.