Windows 7 several times not start

Similar Questions

• Help - HP Pavilion a6030.uk desktop computer. Have to press the power button several times to start?

  Hello

  I have a HP desktop computer. The model is HP Pavilion a6030.uk, Opertating system: windows vista.

  My computer has had no problems at all until yesterday for some reason, I had to push the switch several times to start until he finally turned and did normal starts. As I would press the power as normal to start button, but all of a sudden, it turns off after about 2 seconds and so I would tap on the switch several times and each time it will not start and turn off, then the power button could be pressed again until it would finally turn on and start and run as normal and seems to work correctly. And it was the same thing today, I pressed the power button mutiple times (for example 6 times) until she finally started as usual.

  Savvy/computer im not very well informed or wise in this area, please someone will help me and give me some advice/help to fix/resolve this problem.

  Thank you for taking the time to read this and any help would be appreciated for this problem.

  Thank you.

  Vonbon90, welcome to the forum.

  When I see these symptoms on an old computer, I think it may be a power supply (PSU) failure/ing.  Here's a guide that will help your troubleshooting it.

  In addition, you could test the memory.  This can be done by removing all modules of memory and replacing them one at the time and start.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Windows xp help does not start - unmountable boot volume and recovery console work ethier

  Original title: windows xp help does not start and the recovery console will not work ethier

  the symptoms are used to my windows XP boot it says unmountable boot volume, so I tried to fix it via the recovery console as everyone says but every time I enter fixboot for one of my drives hard /i have 3 I think / it won't work and says unidentified boss so I create another boot and exit area and it does not work so I go back and try fixboot again and it says unknown again after the creation of we know. Same mistakes for chkdsk /r and /p never tried / f but I'm guessing that it won't work ethier. It's like my recovery console won't save the changes it brings to all of my discs hard does anyone have an answer to this

  Hello
  • Will there be any changes made before the show?
  • Did you try to start in safe mode?
   
  You can check these links:
   
  Unmountable Boot Volume
  http://support.Microsoft.com/kb/555302
   
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545
   
  If above does not work, I would say to contact the manufacturer of your computer.
   

• Windows xp sp3 does not start after the failure of windows update and restart.

  Hello

  My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.

  Can anyone help?

  Thank you

  Hello

  · The updates you have installed prior to this problem?

  You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669

• I have nothing on my screen except the window side bar same not start how he back?

  I have nothing on my screen except the window side bar same not start how he back?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 and its updates. I tried to upgrade to Windows 10 several times and I just can't make it work.

  Hi I have a laptop Toshiba Satellite with Windows 7 and its updates.  I tried to upgrade to Windows 10 several times and I just can't make it work.  After pressing the race it stops just to do something.  Does anyone have any suggestions?

  Tom

  Hello

  You can try out it by going to the link below, click on upgrade now and follow the instructions.

  This tool checks your computer before starting the upgrade.

  https://www.Microsoft.com/en-us/software-download/Windows10

  before you perform the upgrade, I suggest that you back up all your important files on an external drive or a drive.

• 15 170tu ac: I HAV to press the power button several times to start the laptop...

  I HAV to press the power button several times to start the laptop... works well with the power supply on.

  all My drivers & bios is updated... but when I opened the lid... I HAV poer press several times the button and he then began 4-5 min.

  Hi @Vishalwagh123,

  Welcome to HP's Forums a great way to get help. It's a great place to find answers and advice! Thanks for the post.

  I understand you have questions turn on/off the device and you must press the power button several times for him to start. I'll be happy to help you.

  Please try these steps first. Perform a hard reset.

  • Steps to do:
  • Turn off the computer and unplug the charger. Then remove the battery.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.

  If it fires up immediately the issue is resolved. Otherwise, try to turn on the computer without the battery and check that it works immediately.

  In your message, you said that it works very well with the charger. However, I need more clarity here to help you better.

  It works immediately when the adapter is connected and the power button is pushed only once?

  If you again press the power button several times, it may be a faulty power button, and you will need to contact the hotline at the service of the unit.

  Let me know what happens when you try to turn on the unit without the charger?

  Visit this link to contact support phone:

  http://HP.care/2bjG4nE

  Hope the problem is solved without hassle. Please keep me in the loop.

  Take care and have a week Holy.

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• Windows xp: services do not start the access denied error 5 or error 1068

  Original title: windows xp: service does not start

  win xp: none of my important services like firewall, DHCP or the server does not start.  Everyone says error 5 access denied or error 1068 could not start dependencies... Please help

  Hello

  1. do you have security software installed on the computer?

  Try the methods provided below and check if the problem persists.

  Method 1:

  I suggest that you disable the security software and then try to start the service and check if the problem persists.

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  You will also need to start long-term services and check if that helps.

  To view service dependencies, click the link below.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/srvdep_view_service_dependencies.mspx?mfr=true

  Method 3:

  Check if the computer isn't on selective startup.

  How to configure Windows to use a Normal startup state

  Configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

   

• Windows Mail & Windows Live Mail does not start, could not open the message store

  Windows Mail & Windows Live Mail will not start. In both cases, I get an error message "Windows Mail could not be started. The application could not open the windows mail message store. Your Windows Mail mailbox data is currently used by another program, such as a virus scanner. Close the program or wait so he could complete its operation, then open Windows Mail again. (0x800C0155, 2). Waiting and turning off antivirus program do not solve the problem. For Windows Mail, I also have the message (Windows Mail could not be started because MSDE.) "DLL cannot be initialized). This message is not displayed for Windows Live.

  Hello

  1. did you of recent changes to the system before the show?

  I suggest you to follow the methods mentioned below and check if it helps.

  Method 1: Troubleshoot Windows Mail

  Follow the link below and troubleshoot Windows Mail and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:

  (a) open the windows Explorer.

  (b) make a right click on the user C: folder, click Properties.

  (c) uncheck the 'read only' option, and remember that there is no blue rear field in the box.

  (d) apply to all subfolders.

  (e) let run its course.

  Method 3:

   

  EDITING REGISTRY WARNING:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  (a) go to Start, type regedit in the search box.

  (b) expand this registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows Mail.

  (c) right-click and choose export to back it up.

  (d) then make sure that Windows Mail is closed and right click on the key again and choose Remove.

  (e) then try to start Windows mail.

   

  Also, I suggest you to send your application in the Windows Live Solution Center for better support.
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  It will be useful.

• The Windows Audio Service does not start

  I have no sound at all. Show my audio device is installed and working. I get a message that the Windows audio service and audio end point service Windows (I think (does not start.)

  Hi JamesSimpson11759,

  ·         What happens when you try to start the Windows Audio Service? You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  I suggest you to run the Microsoft Fixit and check if the problem still persists.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  You can also view the article mentioned for more information:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Let us know the results.

• Windows Media Player does not start, and the accidents of life Mail

  Hi all

  I have a problem: I'm using Vista Home Basic version US, MS 2 MS and my Windows Media Player does not start, Windows life Mail (worm 2009) crashes when I want to write a new e-mail message and does not work Windows 7 Upgrade advisor. So there must be a common problem.
  Any suggestions how to solve this problem would be highly appreciated.
  Marek Köter

  Hi Marek D,.

  A. what happens when you start the media player?

  B. what happens when you run the Upgrade Advisor?

  C. when he last work very well?

  D. recent changes made on your computer?

  E. you get any error message?

  Please answer in return.

  For issues related to windows live mail, you can post your queries to the discussion of direct mail.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Bindu S - Microsoft Support

• get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

  Original title: Windows Media Center

  Whenever I try to add videos (or whatever it is) on my media center it will not add and I get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

  And I restart it, but it still gives me the same thing whenever I'll add things. I also have the Extender for my xbox 360 and video flies never show there either. A few moments ago, I got this working with my xbox and everyhting showed, now it gives me fits. Can someone please help

  Try this for me:

  Task Scheduler (Local)-> library of Task Scheduler-> Microsoft-> Windows-> Media Center-> MediaCenterRecoveryTask

  If this does not work, try this:

  1. open regedit by clicking on the start menu and type "regedit" in the search box and clicking on the link of the regedit program that opens.

  2. go in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

  3. click on the file --> export and save a copy of this portion of the registry where you can find later if you need IT.

  4 Note the values in the column of data to "ProgramFilesDir" and "ProgramFilesDir (x 86(). (If you have only one of those that, don't worry. I think that only users of Windows 64-bit will have both, but I don't know.)

  5. If you have a standard installation of Windows, the right for "ProgramFilesDir" column should read "C:\Program Files" and the right column for "ProgramFilesDir (x 86) ' should read"C:\Program Files (x 86)"." If they are not, try changing them to these values. To do this right click on the name in the left column and selecting Edit. Copy the 'correct' value of this message in the data value field in the box that opens. Click OK , and then do the same for the other (if you have two).

  6. RESTART. It will not work until you restart your computer.

  7. Open Windows Media Center and see if the problem is resolved.

• Windows Firewall service does not start after the removal of Virus

  Hello

  I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
  I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
  I also tried the troubleshooting of Windows Firewall that confusedly says:
  "Windows could not start the Windows Firewall... Not fixed
  "Set permissions for the registry keys involved"... succeeded
  "Windows Firewall service is not started. Not fixed
  "Starting the Firewall Service"... succeeded
  Any ideas would be most appreciated.
  Thank you.

  It seems that I solved the problem by running this:

  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
  that I found in a post on this thread:
  http://social.technet.Microsoft.com/forums/Windows/en-us/5366225a-46e7-4D6C-A389-8bd18a5c3aad/Windows-Firewall-damaged-by-Windows-7-antivirus-2012?Forum=w7itprosecurity

• Windows media player will not start.

  Windows media player will not start. a popes of the window to the top and said to go to the microsoft website I tried to reinstall windows media player 12, I am running windows 7.

  Hello Scotsman,

  How have you tried to uninstall and re-install Windows Media Player 12?

  Uninstalling and reinstalling Windows Media Player:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  If you encounter problems with Windows Media Player, try using the troubleshooter to see if this fixes

  the problem.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

  If the size of the .wmv files is too large, it can cause Windows Media Player to stop working.

  I try and remove videos from Windows Media Player library and test to see if the size of the files could be a problem.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think