The Windows Audio Service does not start

Similar Questions

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• Windows Firewall service does not start after the removal of Virus

  Hello

  I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
  I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
  I also tried the troubleshooting of Windows Firewall that confusedly says:
  "Windows could not start the Windows Firewall... Not fixed
  "Set permissions for the registry keys involved"... succeeded
  "Windows Firewall service is not started. Not fixed
  "Starting the Firewall Service"... succeeded
  Any ideas would be most appreciated.
  Thank you.

  It seems that I solved the problem by running this:

  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
  that I found in a post on this thread:
  http://social.technet.Microsoft.com/forums/Windows/en-us/5366225a-46e7-4D6C-A389-8bd18a5c3aad/Windows-Firewall-damaged-by-Windows-7-antivirus-2012?Forum=w7itprosecurity

• "The Windows update service does not work. Please restart your computer.

  If I click on "Check for Updates", a dialog box appears:

  "The Windows update service does not work. Please restart your computer.

  I rebooted several times, but the same error.
  Help, please.
  Thanks in advance.

  This site will help you get the update of Windows running service

  http://pcsupport.about.com/od/Windows-8/a/Windows-Update-settings-Windows-8.htm

• No sound (audio service does not start, error 1079)

  I have no sound on my laptop.when I have troubleshooted the program that is to show that audio service does not work when I tried to start the audio service is not starting and showing an ERROR: 1079.

  I tried several times but it's showing the same...
  is there a solution for this problem?

  Hello

  Did you change your computer?

  This error code 1079, pop when you try to start the audio service?

  Method 1:

  (a) click Start, type services.msc and press ENTER.

  (b) double-click the "Windows Audio" service

  (c) click on the tab to open a session.

  (d) click Local System account, and then click OK.

  (e) right click on the "Windows Audio" service and then click Start.

  (f) follow the same steps for the service "Windows Audio Endpoint Builder.

  (g) check if the problem persists.

  I suggest you follow the link and check.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

  http://support.Microsoft.com/kb/2478117

  Method 2:

  I suggest to uninstall the sound card in Device Manager and then reinstall it.

  Follow these steps:
  1. click on start and then type devmgmt.msc in the start search box and press on enter.
  2. from the list of devices, expand sound, video and game controllers.
  3. right click on the sound card, and then click on uninstall.
  4 restart the computer.

  After restarting the computer, sound card get installed automatically. Update the drivers manually for your sound card.

  Make sure that you have installed the Windows

  Method 3:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Windows Defender service does not start on Windows 7

  On my laptop, Windows Defender is no longer in effect. Reads the message: the service does not start. When I manually try to start the Defender, the massage is: file not found!
  I can't remove Defender another upodate no longer works.

  Someone knows a solution?

  Hello

  Go to configuration-system board and security - administrative tools - services. Find the windows defender and double-click it. Then choose, auto start option, click on apply. turn it back on.

  In addition, you can read about trouble of Windows defender:

  http://support.Microsoft.com/kb/931849

• Error: The Windows wireless service does not work on this machine and is called autoconfiguration WLAN service.

  Original title: I do not see my available networks

  I get this message when I try to solve the problem: Windows wireless service does not work on this machine and is called autoconfiguration WLAN service. Does not start Windows wireless service failed questions available detection area 5 Windows wireless service does not work on this computer only set not Windows wireless services is also called the autoconfiguration WLAN service.  Network Diagnostics log file name: 5894B3A3-5541-48-A8FE-7A7E2E8E3B10. Detection of Repair.Admin.0.etl detail information name of the computer Collection: RODRIC29 - PC Windows Version: 6.1 Architecture: amd64 time: Thursday, August 23, 2012 12:27:11 Publisher details Windows Network Diagnostics detects problems with network connectivity.  Package version: 1.0 Editor: Microsoft Windows can help anyone? (Windows 7 Inspiron computer laptop)

  Hello

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have security software installed on the computer? If Yes, is it updated regularly?

  3. have you done any software or hardware changes on your computer before this problem?

  4. What are the troubleshooting steps you have tried to solve the problem?

  Refer to these methods.

  
  Method 1:

  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service.

  (a) click Start, type Services.msc and press enter.

  (b) locate the autoconfiguration WLAN service, double-click to open its Properties window.

  (c) on the general tab, change the Startup type to Automatic and click on the Start button.

  (d) click apply and then click ok.

  (e) try to connect to the wireless connection and check the result.

  See also:

  For more information on the wireless settings, see this link:

  http://TechNet.Microsoft.com/en-us/library/ff802404.aspx

  Method 2:

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check if it helps.

• Windows time service does not start

  When I try to start the time service Windows, I get a message:

  ------------------------------------------------------------------------------------------------------------

  Windows could not start the time Service Windows on the Local computer.

  Error 1290: Starting the service failed because one or more services in the same process have a service SID inconsistent type parameter.  A service with service restricted SID type can only coexist in the same process with other services with a restricted SID type. If the type of SID for this service has been configured, you must restart the hosting process in order to start this service.

  ------------------------------------------------------------------------------------------------------------

  The service is listed in the services page and entered into the automatic start mode, but does not start.   I don't have any idea what to do next... Thank you

  To resolve this issue, follow these steps:

  1. Click Start, type regedit in the Search box, and then click regedit.exe in the programs list.
     If you are prompted for an administrator password or a confirmation, type your password, or click continue.
  2. Locate the following registry subkey and click on it:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TapiSrv
  3. In the details pane, right-click ImagePath, and then click Edit.
  4. In the value data box, type the following registry value, and then click OK:
     %SystemRoot%\System32\svchost.exe k NetworkService

     Note If NetworkService does not appear in the value of registry NetworkService %SystemRoot%\System32\svchost.exe - k, the problem that is described in the "Symptoms" section may occur.

  5. Exit the registry editor and restart the computer.

     Note If you try to start the telephony service before you restart the computer, you may receive the following error message:

     Error 1290: Starting the service failed because one or more services in the same process have a service SID inconsistent type parameter. A service with service restricted SID type can only coexist in the same process with other services with a restricted SID type. If the type of SID for this service has been configured, you must restart the hosting process in order to start this service.

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Vista - Error Code: 0 X 80072726 (Windows Update Service does not start)

  When I run Windows Update it says that it is impossible to connect to the service because the service is not running. When I go into the Services to start the Windows Update service, it says: Windows could not start the Windows Update service on Local computer. Error 0 x 80072726: an invalid argument was supplied.

  I am running Vista - 32 SP2, Mcafee antivirus (day and daily scanned), IE v8.0.6001.18904

  Everything was working fine a week ago.  The only thing I changed on my PC since it is that I have installed Bioshock 2 and Games for Windows Live.  Uninstalling these applications has not solved the problem.

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. manually & repeatedly updating the McAfee application until you get a invite "no update more".

  3. components of Windows Update (new) reset: http://support.microsoft.com/kb/971058 [access KB971058 via IE8 only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]

  4. restart & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Firewall service does not start

  I got the majority of the problems fixed but something is always messed up. When I try to activate the windows firewall service, he says:

  Windows could not start the firewall windows on the local computer. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code.

  Log name: System
  Source: Service Control Manager
  Date: 20/04/2013 18:09:38
  Event ID: 7024
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Michael-PC
  Description:
  The completed Windows with special service error following firewall service:
  The system cannot find the specified file.
  The event XML:
  
   
     
      7024
      0
      2
      0
      0
      0 x 8080000000000000
     
      245232
     
     
      System
      Michael-PC
     
   
   
      Windows Firewall
      %%d Ko
      4 00700073005300760063000000
   
  

  I conducted several analyses of different viruses and the system seems clean.

  This will help you identify your problem

  If this also isn't that the problem may be that your firewall service is damaged...

  Try to repair the firewall service

  (1) open a command prompt using run as administrator

  and copy - paste these

  rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 netrass.inf

  and press enter

  (2) prompt (run as administrator), type "netsh advfirewall reset " and press "enter."

• Windows time service does not start. Error 1290

  I was a matter of troubleshooting time and performed the following commands

  net stop w32tm
  w32tm /unregister
  w32tm /register
  net start w32tm

  And I got an error message.  (the document is not)
  Went to services and tried to manually start the service and reveived the following message is displayed.

  Error 1290: Starting the service failed because one or more services in the same process have a service SID inconsistent type parameter.  A service with service restricted SID type can only coexist in the same process with other services with a restricted SID type. If the type of SID for this service has been configured, you must restart the hosting process in order to start this service.

  I did the steps in this post on the forum and it still does not work.     I get the same error.  I can't run w32tm.

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/6bbea43f-5575-4E78-9b52-ac766632bfc2

  Restarting the server several times without success

  Hello William Beattie,.

  1. did you restart the computer after you complete the steps?

  I suggest that you restart your computer after you complete the steps. If you already have, I suggest that you restart the computer again. Any changes made to the registry would be effective only on a reboot.

  I also suggest that you perform the same steps and check the registry again and restart the computer.

  Once you restart the computer, try to start the service and check if you are able to boot.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• continues to tell me IES3H must be installed, and that the Windows Hosting Service does not work?

  IES3H no - where on the computer, continues to tell me host Service Windows does not work, and that Windows will notify me when a solution is found. Very confused.

  Hello

  Please see this thread in the IE Group on this subject:
  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/b2fefc18-79a3-4C3C-a9de-54d1a2062183 Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• USB ports no-opperational in the Windows 7 environment, does not start mode command line safe

  Quick description: experienced difficulty trying to reformat a HD problem. It has been suggested that I have download the diagnosis of the manufacturer. Did. Restarted the computer as required to run the new program. After reboot, no USB port work Windows. Considering that all my USB inputs, it is extremely annoying. Input devices still work on other computers and still work during the start upward (before windows), also does not open in safe mode with the command prompt.

  I tried to reformat a LaCie HD that was previously used for a Mac for PC usage. Gave me a code 43 error and a problem code: 0000002B. Had a bad"block" in the HD somewhere read that I should try to use the manufacturer diagnostic tools to check the HD on.» Downloaded the "LaCie Update Tool" and installed it. It took a reboot. After the reboot, any USB devices worked. (Will begin another thread on the HD as soon as I have this problem.)

  Tried to restart in Mode without failure. Then the Safe Mode with the command of the DVD prompt. (However, I'm not 100% sure that I'm loading from the DVD, I couldn't find a good answer on how to do something so basic.) Always seems to load in the window 7 - always end upwards the newspaper account on screen - certainly no command prompt.

  The keyboard and mouse work on other systems and the keyboard works fine before the Windows 7 screen (the selection of mode that starts in) so I'm pretty sure that it is a Windows 7 problem. Can't really get in the error codes that I can't enter anything now or move the cursor at all. (I'll try to borrow a non-USB keyboard and mouse).

  After a reboot when it asks me what I want to start the computer in safe mode or normal windows 7, loading the drivers, it stops at:

  \windows\system32\DRIVERS\CLASSPNP. SYS

  I don't know if this is normal or the system stuck.

  I tried a manual reset of the motherboard and deleted manually the CMOS on the motherboard did not help - but don't expect really.

  I think I need to run a disk check / fix from the command prompt, but I can't even at the command prompt to the top.

  Thanks to anyone who takes the time to answer, a lot of satisfaction in advance.

  My system:

  Windows 7 64 bit

  ADM Phenom 955 Black Edition Quad

  ASUS 890FXA-UD5

  Microsoft USB wireless keyboard and mouse

  Less relevant stuff: ADATA DDR3 1600 G XPG 2 X 2 GB, Sapphire Radeon 4670 1 GB, Western Digital Caviar Black 640 GB HD, ASUS DVD/CD drive (DRW 24B1st) Corsair TX 750 W

  The Repair Mode command prompt supports USB devices. Here is how you get there:

  1. put your BIOS so that it uses the DVD drive as its primary boot device.
  2 start the computer with your Windows 7 repair CD.
  3. press a button if you are prompted to start from the DVD.
  4. Select repair when prompted.
  5. Select the keyboard language when you are prompted.
  6. When you are prompted, select command prompt.
  In step 2, you can also use the Windows 7 installation DVD. The subsequent steps are similar to those above.

  The process described above is independent of everything that is on your hard drive. If your USB devices still do not work then you probably have a motherboard problem. If it is a desktop computer then you could by a 4 port USB card.

  If you get an account and password for the boot process then you dΘmarrez not from the CD/DVD. I've seen a number of messages in which people reported that they were unable to boot from the CD/DVD drive. Here are the most common reasons for these failures:
  -L' poster neglected the prompt to press a key to boot from the CD/DVD drive.
  -The CD/DVD boot was not a boot disk or was damaged. Use it on another machine has confirmed this.
  -Some BIOS setting was incorrect. Start with some other boot CD/DVD (for example here: http://pogostick.net/~pnh/ntpasswd/) confirmed it.
  -The CD/DVD drive has been damaged or is unable to boot from a boot CD or DVD.
  -The machine has a hardware problem (for example, a motherboard problem) which prevents start in any mode.

• The Windows Setup program does not start

  I'm trying to install 10 windows using boot camp. I'm on a macbook pro retina early 2015 on OSX 10.11.2

  I opened the boot camp assistant and it brings me to a screen to select the ISO and partition my drive.

  After I choose how I want to partition my drive, it brings me to a screen where it downloads windows supported, copies of windows install files and restarts.

  At this point, I expect 10 to start windows installer, however it brings me right to the normal sequence of boot OSX. I tried now option when it is booting, but I only see the OSX disk to start. Then, I go to bootcamp again and it gives me the ability to delete my bootcamp partition. I checked in disk utility, and it seems that the drive is partitioned in fact, but I can't get the windows installer to run and install windows on the new partition.

  I was wondering if anyone had questions similar to this.

  Thank you!

  Please perform the following two procedures...

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  If you have any external storage connected, unplug it during the installation process. New attempt of BCA. You will need to remove the previous partition, and start all over again.

• Windows time service does not start. Verified dll and registry keys.

  I'm having a problem with the position of the user.

  Windows XP SP3 and joined to a domain

  User, called because timezone was incorrectly at the time of the East - the user is in Chicago, Ministry of the Interior is in New Jersey.

  I run remotely to machine operator and successfully changed the time zone under the local administrator account. However, the time of the user in the system tray has not changed

  After a little digging, I discovered that the time service Windows has not been started. When I try to start it I get

  126 system error has occurred.

  The specified module could not be found

  I checked that the file in the System32 folder w32time.dll

  I tried without registration and re - register the DLL file

  I tried repository and re-enrollment time Service Windows

  I tried to replace the DLL with a copy from an XP SP3 installation disc

  I tried to replace the DLL with a copy from a working PC

  I tried to replace the registry entries for service with the entries from a working PC

  I checked to ensure there is no space in the TYPE key: http://support.microsoft.com/kb/959113

  I always have the system 126 error and time will not be updated.

  Help, please.

  Hi Derek Hansell.

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads