Windows Firewall service does not start after the removal of Virus
Hello
It seems that I solved the problem by running this:
Tags: Windows
Similar Questions
-
Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.
Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3
I hope this helps...
-
Windows xp sp3 does not start after the failure of windows update and restart.
Hello
My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.
Can anyone help?
Thank you
Hello
· The updates you have installed prior to this problem?
You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669
-
Windows Firewall service does not start
I got the majority of the problems fixed but something is always messed up. When I try to activate the windows firewall service, he says:
Windows could not start the firewall windows on the local computer. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code.
Log name: System
Source: Service Control Manager
Date: 20/04/2013 18:09:38
Event ID: 7024
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: Michael-PC
Description:
The completed Windows with special service error following firewall service:
The system cannot find the specified file.
The event XML:
7024
0
2
0
0
0 x 8080000000000000
245232
System
Michael-PC
Windows Firewall
%%d Ko
4 00700073005300760063000000
I conducted several analyses of different viruses and the system seems clean.
This will help you identify your problem
If this also isn't that the problem may be that your firewall service is damaged...
Try to repair the firewall service
(1) open a command prompt using run as administrator
and copy - paste these
rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 netrass.inf
and press enter
(2) prompt (run as administrator), type "netsh advfirewall reset " and press "enter."
-
HP Quick Launch HPWMISVC service does not start after the installation of new
Hello
I installed an SSD in my laptop as the C: drive, and I did a clean install of Windows 7 using an official ISO image, which eliminates the partition HP Recovery, sorry . I have installed sp54001 - HP Quick Launch, which is correct, but the HPWMISVC service will not start. My research, I found that the service is supposed to allow interaction with the desktop. However, this feature was supposed to be turned off in Vista because of security risks. Any thoughts? Thank you very much.
HP Pavilion dv7-4285dx
Product number: XZ029UA #ABA
Windows 7 Home Premium 64-bit from the ISO image: X 17 - 58997.iso
"If you made the wrong schema, so what wire did I just cut?"-Robert E. TierneyHello
I did more research and it seems that HP Quick Launch, it's not what I'm looking for. I was looking for visual feedback for volume changes by using the function keys. I opened the Windows Mobility Center and pressed the up/down volume function keys and the volume changes indeed. It's good enough for me. I thought that special software was necessary. Thank you very much.
-
Utility profile WLAN does not start after the removal of some tools from Toshiba
Here, I would like to say that Toshiba software (utilities, entering in laptops) is poor, unstable and mostly useless. I think it makes sense to launch a call to management of Toshiba to stop dealing us with the ugly such software.
SHAME ON THEM!For example: in my new Toshiba laptop utility of LAN/WLAN profile (the program is useful only) did not work. It has not removed after uninstalling some of the Toshiba Utilities, their menu program shortcuts forms and I can also see their icons to the left in the notification area settings.
In addition, some of the utilities did not start (like Toshiba disc Creator). Also utility Toshiba are very different, poorly described and localized, do not appear in between them and their shortcuts are entwined in the menu of programs with shortcuts to documentation.
Hey Buddy,
To be honest I don t understand why people post only the negative side of utilities Toshiba pre-installed you also noticed that they make your (computer) life easier?
I don t want to count each tool of Toshiba, but they provide useful functions like CD burning, material is diagnosed, assistant LAN/WLAN connection and so far.
If you don't like it, n no one said that should be used. Uninstall it and be happy with your laptop. :)
Regarding your problem:
I put t know why don t tool work harder because you don't l t post the exact name of it, and that the tools you deleted but say you ConfigFree? The program is useful for WLAN/LAN connections then try to reinstall Toshiba page. -
computer does not start after the Windows XP logo window
Windows xp home edition
service pack 2
Dell inspiron 15011. computer does not start after the Windows XP logo window
2 works well in safe mode, even connect to the external monitor
3. I reinstalled xp many times, problem stil exist.All the answers?
Hi dhanushm,
- What happens after the Windows logo screen?
- You receive an error message?
- You have security software installed on the computer?
- Have you performed an installation clean Windows XP and even after that this problem exists?
Method 1
As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
- Click Start , and then click run.
- Type msconfig , and then click OK.
The System Configuration utility dialog box appears. - Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
- When you are prompted, click restart to restart the computer.
Method 2
If fails it above step can refer to the article below and try the steps mentioned, check if it helps.
After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
-
ITunes does not start after the installation of Windows 10
ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).
Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support
Solution, according to this link, is:
If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
vCenter Server Service does not start after P2V
Hello community.
A problem that I have not been able to solve and looking for help.
Problem:
vCenter Server Service does not start after that Windows Server was P2V would be. We get an ERROR 2 of the Service. Get the error of the system Windows 7024 event log.
History:
The client, I currently work with that tries to smash to the high location of the DEV VCENTER. Location of DEV vcenter works now all for this site (domains, dns and all development servers). If its VCENTER PRODUCTION of this location. Currently, SQL Server (dedicated to vCenter), VCENTER and SSO are all sitting on the same box. Let's break the SSO, SQL and VCENTER in their own servers. However, the client wants to re - use the current physical server for SQL Server. So I need P2V physical server existing until I can start the new environment.
I was able to get all of the services working on the virtual vCenter (SQL, SSO, Update Manager etc etc) but have been unable to get the real vCenter Server Service works. Fails every time with the 2 ERROR Code. I was unable to get a KB of VMWARE item that corresponds to the issue I'm having. ERROR 2 code has many articles and none have worked.
Details:
vCenter 5.1 Build 799731
SQL 2008 R2
Windows 2008 R2
When the vCenter Service tries to start it will stop at the 50% mark and gives this error: (I removed the names for security reasons)
Windows could not start the VMware VirtualCenter server on <server name>. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code
When I saw the Windows system event log I get this error:
EVENT ID: 7024
The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...
When I go through the vpxd log file I see this at the end of the newspaper: (I removed the names for security reasons)
2013-12 - T 03, 16: 08:21.843 - 05:00 [info 09168 'dbdbPortgroup'] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [0]
2013-12 - T 03, 16: 08:21.844 - 05:00 [info 09168 "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI value: https:// < name of vcenter server: Port #> / sso-adminserver/sdk
2013-12 - T 03, 16: 08:21.844 - 05:00 [09168 "authvpxdMoSessionManager" info] certificates [OSP] [SessionManagerMo::Init] download m root...
2013-12 - T 03, 16: 08:21.858 - 05:00 [01440 info "Default"] wire attached
2013-12 - T 03, 16: 08:21.880 - 05:00 [09168 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: unexpected exception
-> Backtrace:
-> backtrace [00] rip 000000018018977 a
-> backtrace [01] rip 0000000180100 c 98
-> backtrace [02] rip 0000000180101fae
-> backtrace [03] rip 000000018008aeab
-> backtrace [04] rip 00000000005 b 4971
-> backtrace [05] rip 0000000000551298
-> backtrace [06] rip 00000000005516 c 9
-> backtrace [07] rip 00000000004c0fae
-> backtrace [08] rip 00000001405bbfb8
-> backtrace [09] rip 000000013f4b0078
-> backtrace [10] rip 000000013f4b016a
-> backtrace [11] rip 000000013f4b0279
-> backtrace [12] rip 000000013f4b0609
-> backtrace [13] rip 000000013f7f2903
-> backtrace [14] rip 000000013ff9e4b9
-> backtrace [15] rip 000000013ff9835c
-> backtrace [16] rip 00000001401b8a3b
-> backtrace [17] rip 000007fefedca82d
-> backtrace [18] rip 000000007783652d
-> backtrace [19] rip 0000000077ccc521
->
2013-12 - T 03, 16: 08:21.881 - 05:00 [warning 09168 'VpxProfiler"] ServerApp::Init [TotalTime] took ms 4603
2013-12 - T 03, 16: 08:21.881 - 05:00 [09168 error "Default"] could not initialize VMware VirtualCenter. Closing...
2013-12 - T 03, 16: 08:21.882 - 05:00 [09168 "vpxdvpxdSupportManager" info] free/busy information wrote
2013-12 - T 03, 16: 08:29.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-39d3665d =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms
2013-12 - T 03, 16: 08:41.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-da6b3df9 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001
2013-12 - T 03, 16: 08:53.281 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-5086bf7f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001
2013-12 - T 03, 16: 09:05.282 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-3abd7c64 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms
2013-12 - T 03, 16: 09:17.283 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-b9c8c88a =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001
2013-12 - T 03, 16: 09:17.353 - 05:00 [info 09168 "Default"] forcing of VMware VirtualCenter stop now
I pulled the virtual machine in a laboratory and all network problems that would be removed to isolate. Now the VCENTER is shouting at this topic it can't find one of its guests in the vdxp log, but that shouldn't matter. All Services have been changed for local accounts. All network and ODBC parameters are able to see the server... aka the server can see. I didn't remove any software or drivers for the VM (techniques it is my third P2V to the same server for testing reasons)... And the only thing that won't start is always VCENTER SERVER... SSO is started, SQL is launched...
Also everything remained the same on the virtual machine (DNS, IP, NAME etc etc). Stop the physical and start-up it upward don't show any problems. Only when its summer P2V would have done that themselves.
I can't get this number. Need help.
Thoughts?
Thank you
BostonTechGuy
In this case, we have finished rebuilding the vCenter and all migrate on. Wish had better put up-to-date, but ultimately, it's what has been done.
Thank you
BostonTechGuy
-
Does not start after the upgrade to 1.5.
Does not start after the upgrade to 1.5. "EdgeAnimate.exe - not found entry Point? -Point procedure entry GetGestureInfo is not found in USER32.dll dynamic link library. »
All ideas
No problems in the past with edge since September 2012.
=============
Laptop HP Pavilion dv7-2185dx
Dv7-2185dx product name
#ABA product number NV023UA
Microprocessor 2.00 Ghz Intel Centrino 2 Processor Intel Core 2 Quad Q9000 processor technology
The microprocessor Cache L2 6 MB Cache memory
6144 MB of memory
Memory Max 8192MB
Graphic ATI Mobility Radeon HD 4650 (M96)
Video memory up to 2815 MB (1024 MB dedicated)
500 GB (5400 RPM) hard drive
Multimedia drive LightScribe SuperMulti 8 X DVD±R/RW with Support Double layer
17.3 "diagonal HD + LED display high-definition HP BrightView Widescreen Display (1600 x 900)
Fax/Modem high speed 56 k modem
Network integrated 10/100/1000 Gigabit Ethernet LAN adapter
Wireless Connectivity Intel WiFi Link 5100AGN
The Altec Lansing SRS Premium Sound technology with subwoofer
101 keyboard compatible with the keyboard keys full size numeric keypad with integrated
Pointing device touch pad with On / Off button and dedicated vertical scroll up/down pad
PC Card Slots 1 Slot ExpressCard/54 (also supports ExpressCard/34)
External ports
5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card
4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA
2 headphone
1 microphone input
HDMI
1 VGA (15-pin)
eSATA + USB 2.0
1 RJ-11 (modem)
1 RJ - 45 (LAN)
expansion port for computer 1 cell 3
1 IEEE 1394
irewire (4 pin)
1 consumer IR (remote receiver)
Other devices HP Webcam with integrated digital microphone
Dimensions 16.2 "(W) x 10.9" (D) x 1.37 "(min H) / 1.70" (maximum H)
Weight lbs 7,74
Housing for Kensington MicroSaver Security lock
Turn on the password
Accepts 3rd party locking safety devices
Software
Operating system:
Genuine Windows Vista Home Premium 64-bit with Service Pack 1
Hi, people.
I was able to reproduce the problem here, so the good news is that you're not imagining things. We are looking in the options right now for you guys, and I will contact you individually by private message to start again at the top. This being said, please note that our techniques, Vista is an operating system that is not supported, and our team is not stable time on this platform. We will do the best we can and we will keep you guys, update as to what status is.
Thank you
-Elaine
-
Original title: xp does not start after the installation of avira
I have a HP Slimline s7410
XP Home Edition SP3
I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
I have a cd/dvd drive of work.
I don't have an XP bootable installation CDMy system worked well until: I installed the free version of Avira
Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.Here's what my BSOD looks like:
Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical information:
STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)Any help is greatly appreciated! :)
My first suggestion is to do a system restore at this time point.
second suggestion is to keep your external drive connected to the pc at all times. only detach when necessary. of course, it would be better to install a second hard drive in the computer instead. in any case, keep your personal files out of the system disk is a wise thing to do. You can also download and store files for free on the Microsoft Skydrive site.
third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month. Basically, you can open the Explorer and right-click on the drive letter. then select Properties, and on the Tools tab, you will have the opportunity to run the disk check. then reboot and do a Defrag. where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.
Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.
so my suggestion is to do a series of tests using your cd bootable your computer works. see if you can actually run a chkdsk/r at the moment with them. If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them. in any case, see if your boot at the moment media can run a check disk at all, and let me know.
fifth proposal is to install "microsoft security essentials" like your anti virus program. even if you have run ubantu, it is not likely to have been an infected copy. anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations. the people who make the virus deliberately their engineer for the windows operating system. If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too. Although they no doubt, attacks are more frequent for the windows os.
-
Two iMacs does not start after the 10.11.4 update.
Two iMacs does not start after the 10.11.4 update. Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd. He then gets stuck in a loop trying to start. Tried to reset the SMC and LANDAU. Without success. Started in recovery mode and ran disk utility. Discs said OK. Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).) Installation is finished but still once does not start. Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater. Installation seems to work, but once again, the macs will not start. Same 'unexpected launchd sigkill' error. A mac is now back working properly with 10.11.3 the other will be shortly. Is there a problem with the accession? Our COMPUTER support use Munki to get updates from one day to the next. Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.
More information: two bricks iMacs were late 2013 models. A 21 "and a 27. We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.
-
Computer does not start after the screen of the bios, Compaq Presario SR1023WM
Ok. Trying to fix a friend's computer and seem to have met a strange barrier.
Problem: The computer does not start after the bios screen.
Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well. And that's it as far as the computer becomes. After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect. I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point. I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected. Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success. I tried using a different memory stick and different memory as well... Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).
The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.
http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.
I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.
I have a pretty strong understanding of computer repair, so feel free to give me something to try.
If you need more information out of me, let me know as well.
Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.
At the back of the pc is the condition of the PSU led green or flashing?
-
Z600: computer does not start after the installation of the 5 TB SATA drive
My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk. After removing the drive, the computer starts. I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?
Thanks for the info. I added the GPT to my search and discovered what had to be done in disk management. Here is a page with step by step instructions and photos. http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/
-
computer does not start after the installation of vista updates.
computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.
Hello
Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.
Hope that information was useful
Maybe you are looking for
-
Update multiple "Library" after El Capitan records
Hello After upgrade to El Capitan, I have 3 different 'Library' folders on my mac. 1 mac HD-> users-> MyMacbook-> library (modified more than 3 months back) 2 mac HD-> Library (modified today) 3 mac HD-> System-> Library (modified today) Between the
-
Would someone please able to tell me where the microphone is located on the laptop Lenovo G500?
-
Automatic updates of the program from Microsoft for MS Office Professional
I have 2002 MS Office Professional installed on my system, and I keep getting updates automatic7 MS Office Pro for200... WHY? Mark Polk
-
Update for windows xp (KB268509) guard security fail with 0x8007F0F4 error code
Original title: update for windows xp (KB268509) maintains a failure. What should I do? Whenever my computer tells me to click on the yellow shield to automatically install updates, on & on it keeps appearing, no matter how many times I click to ins
-
I get an error code 80070641.
I have Windows Vista and I have no office. Remove these updates will solve these issues?