Windows 7 Ultimate 32 and 64 invalid update

Similar Questions

• I have Windows 7 Ultimate 32 - bit (Home Premium update) and I want to re - install Windows but in 64-bit. Will I still have Ultimate

  I have a Toshiba with Windows 7 Ultimate 32 - bit (Home Premium update) and I want to re - install Windows but in 64-bit. Will I still have Ultimate?

  I'm going to re - install from 32 to 64-bit via the loader of windows recovery.
  This computer has asked ma to install 32 or 64 bit when I first turned on, I chose 32, but now I want to 64.

  It depends on. Is the license of Windows 7 Ultimate, a full version license or upgrade, or upgrade Express?

  If its an Express upgrade license, you will need to reinstall Windows 7 Home Premium 64-bit, then make the Express Windows 7 upgrade Ultimate edition using the Express upgrade key, you have.

  If you have a Windows 7 Ultimate full retail or upgrade version license, you can simply by using the 64-bit Windows 7 Ultimate disc and do a custom Setup on the current installation of 32-bit.

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the DVD 64 bit Windows 7
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• After you have reinstalled windows 7 Ultimate edition (and update), my monitor drivers are gone

  After you have reinstalled windows 7 Ultimate edition (and update), my monitor drivers went (poster generic non-pnp monitor Device Manager). I have viewsonic va1916w monitor, and I can't find the drivers on the official website of viewsonic. Where can I find it?  Thank you

  Drivers for Vista & Winxp, the two bit versions are available on the website of decision makers

  http://www.ViewSonic.com/products/archive/va1916w.htm

  The issue may have been caused by updateing your system drivers from somewhere other than your PC manufacturers or the motherboard manufacturers site, in the case of a generic desktop computer

• Cannot install dragon naturallyspeaking on my 64-bit windows 7 or my windows vista ultimate? and if there is away from do it please let me know.

  Cannot install dragon naturallyspeaking 10 on my 64-bit windows 7 or my windows vista ultimate? and if there is away from do it please let me know.

  You must download the 10.1 update to use DNS 10 on 64-bit Windows. http://community.nuance.com/blogs/Dragon/archive/2009/03/25/Dragon-preferred-and-standard-10-1-updates-for-Vista-64-available-in-English.aspx

• How to create a recovery partition bootable to windows vista ultimate with all installed programs, updates and all the configuration as the factory recovery disc?

  Hello world!!

  I formatted my HP laptop, then I installed Windows Vista Ultimate, I used before Windows Vista Home Edition, but when I made this new installation I lost all programs and the configuration that I have before, so I installed all once again, but I don't have a recovery for this partition... so I would like to have one... in the case of making a mistake or some accident my system virus or something that my system fail totally I recover my system, in this case completely without installing all windows and programs and updates... Well, you know take in many times to do it one by one... it would be nice if someone can help me with this, please explain the details, I'm no expert on this, but I would like to know... Tank you.

  • Response
  • Quote
  Type in the start - Help and Support
   
  PC Backup
   
  Choose the topics
   
  Back up your programs, files and system settings
  Restore your computer from a system image backup
  --
  ..
  --
  "eaglewarior" wrote in message news: af8c8e21-4-dec-4e67-9700-826358e2d489...
  >
  > Hi everyone!
  >
  > I formatted my HP laptop, then I installed Windows Vista Ultimate, I used
  > I have Windows Vista Home Edition, but when I made this new facility
  > lost all programs and the configuration that I have before, so I installed all
  > once again, but I don't have a recovery for this partition... so, I would
  > like to have one... in case of make a mistake or some accident of virus my
  > system or something that my system completely fail I will recover completely
  > my system, in this case without installing all programs and windows and
  > updates... Well, you know take many time to make this one... so
  > would be nice if someone can help me with this, please explain the details
  > I'm no expert on this but I would like to know... Tank you.
  >
  > a.. Replyb... Quote
  >
   
   

• The new installation of Windows 7 Ultimate SP1 hung check for updates

  I have Windows 7 Ultimate SP1 installed a week back. When I check the updates, the updates are not downloaded. I have "Install updates automatically (recommended)" selected in the update settings and my internet connection is as well.

  Here's the WindowsUpdate log:

  2016-06-22 15:59:06:033 936 8 c 0 Misc = logging initialized (build: 7.6.7600.320, tz: + 0530) =.
  2016-06-22 15:59:06:033 936 8 c 0 Misc = process: C:\Windows\system32\svchost.exe
  2016-06-22 15:59:06:033 936 8 c 0 Misc = Module: c:\windows\system32\wuaueng.dll
  2016-06-22 15:59:06:018 936 8 c 0 Service *.
  2016-06-22 15:59:06:033 936 8 c 0 Service * START * Service: Service startup
  2016-06-22 15:59:06:033 936 8 c 0 Service *.
  2016-06-22 15:59:06:049 936 8 c 0 Agent * WU client version 7.6.7600.320
  2016-06-22 15:59:06:049 936 8 c 0 Agent * Base Directory: C:\Windows\SoftwareDistribution
  2016-06-22 15:59:06:049 936 8 c 0 Agent * access type: no proxy
  2016-06-22 15:59:06:049 936 8 c 0 Agent * network state: connected
  2016-06-22 15:59:06:111 936 4e0 report CWERReporter::Init succeeded
  2016-06-22 15:59:06:111 936 4e0 Agent * Agent: initialization of Windows Update Agent *.
  2016-06-22 15:59:06:111 936 4e0 Agent * prerequisite roots succeeded.
  2016-06-22 15:59:06:111 936 4e0 Agent * Agent: initialization of the global parameters cache *.
  2016-06-22 15:59:06:111 936 4e0 Agent * WSUS server:
  2016-06-22 15:59:06:111 936 4e0 Agent * state WSUS server:
  2016-06-22 15:59:06:111 936 4e0 Agent * target group: (Unassigned Computers)
  2016-06-22 15:59:06:111 936 4e0 Agent * Windows Update access disabled: No.
  2016-06-22 15:59:06:111 936 4e0 Agent * found 1 to continued calls to restore download
  2016-06-22 15:59:06:111 936 4e0 DnldMgr Download manager restoring 0 downloads
  2016-06-22 15:59:06:111 936 4e0 Agent * correctly loaded 1 download persistent calls.
  2016-06-22 15:59:06:127 936 4e0 to THE # to THE: initialization of automatic updates.
  2016-06-22 15:59:06:127 936 4e0 to THE timeout parameter next detection to 2016-06-22 10:29:06
  type of approval # to THE 2016-06-22 15:59:06:127 936 4e0: on demand (user preference)
  2016-06-22 15:59:06:127 936 4e0 to THE # scheduled install date and time: every day at 19:00
  2016-06-22 15:59:06:127 936 4e0 to THE # automatically install minor updates: Yes (user preference)
  2016-06-22 15:59:06:127 936 4e0 to THE # will interact with non-admins (Non-admins are high (user preference))
  2016-06-22 15:59:06:127 936 4e0 to # poster of notifications of recommended software (user preference)
  2016-06-22 15:59:06:127 936 4e0 phase of installation to THE adjustment to THE planned to 2016-06-22 13:30
  2016-06-22 15:59:07:172 936 8 c 0 report * report: initialization of static data to report *.
  2016-06-22 15:59:07:172 936 8 c 0 report * OS Version = 6.1.7601.1.0.65792
  2016-06-22 15:59:07:172 936 8 c 0 report * OS Product Type = 0x00000001
  2016-06-22 15:59:07:172 936 8 c 0 report * computer brand = LENOVO
  2016-06-22 15:59:07:172 936 8 c 0 report * computer model = 10E00041IH
  2016-06-22 15:59:07:172 936 8 c 0 report * Bios revision = FSKT28A
  2016-06-22 15:59:07:172 936 8 c 0 report * name of Bios = LENOVO BIOS Rev: FSKT28A 0.0
  2016-06-22 15:59:07:172 936 8 c 0 report * the Bios Release Date = 2015-12 - 31 T 00: 00:00
  2016-06-22 15:59:07:172 936 8 c 0 report * locale ID = 16393
  2016-06-22 15:59:07:188 936 4e0 successfully wrote event to THE health state: 0
  2016-06-22 15:59:07:188 936 4e0 to THE initialization feature updates
  2016-06-22 15:59:07:188 936 4e0 to THE Found set 0 cached updates featured
  2016-06-22 15:59:07:188 936 4e0 successfully wrote event to THE health state: 0
  2016-06-22 15:59:07:188 936 4e0 successfully wrote event to THE health state: 0
  2016-06-22 15:59:07:188 4e0 936 finished to THE initialization delay
  2016-06-22 15:59:07:188 936 8 C 0 TO THE #.
  2016-06-22 15:59:07:188 936 8 c 0 to THE # START # to THE: research updates
  2016-06-22 15:59:07:188 936 8 C 0 TO THE #.
  2016-06-22 15:59:07:219 936 8 C 0 TO THE<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2016-06-22 15:59:07:219 936 bcc Agent *.
  2016-06-22 15:59:07:219 936 bcc Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2016-06-22 15:59:07:219 936 bcc Agent *.
  2016-06-22 15:59:07:219 936 bcc Agent * Online = No; Ignore download priority = No
  2016 06-22 936 15:59:07:219 bcc Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2016-06-22 15:59:07:219 936 bcc Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} third service
  2016-06-22 15:59:07:219 936 bcc Agent * Search Scope = {Machine}
  2016 06-22 15:59:08:483 936 4e4 detection with initiating at THE via API DetectNow
  2016 06-22 936 4e4 15:59:08:483 to THE will make the current sensing end detection
  2016-06-22 16:01:12:537 936 CCI pilot matched device ACPI\LEN4001 driver
  2016-06-22 16:01:12:537 936 bcc driver status: 0 x 1802400, ProblemNumber: 0x00001c
  2016-06-22 16:01:12:537 936 CCI pilot was PCI VEN_8086 & DEV_9C3A & SUBSYS_30B617AA & REV_04 device driver
  2016-06-22 16:01:12:537 936 bcc driver status: 0 x 1802400, ProblemNumber: 0x00001c
  2016-06-22 16:01:12:537 936 CCI pilot matched device PCI VEN_8086 & DEV_0A16 & SUBSYS_30B617AA & REV_0B driver
  2016-06-22 16:01:12:537 936 bcc driver status: 0x180200a, ProblemNumber: 00000000
  2016-06-22 16:02:25:362 936 bcc Agent WARNING: has no rule Installed, updateId = {818701AF-1182-45C2-BD1E-17068AD171D6}.104, hr = 80242013
  2016-06-22 16:03:27:418 936 bcc Agent update {EC231084-85C2-4DAF-BFC4-50BBE4022257}.102 has no local extended metadata. Do not return.
  2016-06-22 16:03:27:418 936 bcc Agent update {041E4F9F-3A3D-4F58-8B2F-5E6FE95C4591}.126 has no local extended metadata. Do not return.
  2016-06-22 16:08:52:741 2052 454 Misc = logging initialized (build: 7.6.7600.320, tz: + 0530) =.
  2016-06-22 16:08:52:741 2052 454 Misc = process: c:\Program Files\Microsoft Security Client\MpCmdRun.exe
  2016 06-22 2052 454 Misc = Module 16:08:52:741: C:\Windows\system32\wuapi.dll
  2016-06-22 16:08:52:741 2052 454 COMAPI-
  2016 06-22 2052 454 COMAPI - START - 16:08:52:741 COMAPI: search [ClientId = Microsoft Security Essentials (EDB4FA23-53B8-4AFA-8C5D-99752CCA7094)]
  2016-06-22 16:08:52:741 2052 454 COMAPI-
  2016 2052 454 COMAPI 06-22 16:08:52:741<-- submitted="" --="" comapi:="" search="" [clientid="Microsoft" security="" essentials="">

  The value of the automatic updates to "never check for updates" and then restart. Download and install KB3020369 and KB3161608, then try again.

  https://support.Microsoft.com/en-us/KB/3020369

  https://support.Microsoft.com/en-us/KB/3161608

  Best regards, VZ

• Windows Vista Ultimate guard restart after automatic updates

  Someone help me please find the fix for this problem.  I don't want to re - install Vista again.

  My computer has been in auto for Windows Vista Edition full update.  Service pack 1 & 2 was installed without any problems.  The last update was an optional update for Chinese langauage packs.  When I noticed that this update was at a standstill at 36%, I tried to restart the computer.  Then, there was that messeage "configuration updated, do not turn off the computer".  It takes more than 15 minutes and nothing happened, so I restarted the computer.  Now, the message appears after windows logo vista 'configuration updated step 3 or 3 to 0%.  The update could never finished, the computer just reset again once, the same thing repeats again and again.

  Thank you.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• I use the Windows 7 Ultimate version, and I've changed the default in Chinese language. I tried to download a Chinese program; However, I begin to see characters like $% & * () ^, instead of the correct Chinese character. Any thoughts?

  • Using windows 7 ultimate, of the language traditional Chinese
  • you try to run a simplified Chinese program

  • Using windows 7 ultimate, of the language traditional Chinese
  • you try to run a simplified Chinese program

  It's just a hunch, but you can try to set the system to "simplified Chinese" in the control--> region and language--> administrative panel.

  I guess this setting is specifically suitable for problematic programs like yours that I believe is designed to run only on systems in the language of the program. But if you use other programs of non-internationally-friendly designed for all other languages than in your system locale setting, after they in turn will show their evil characters.

  So if I am mistaken about the meaning of this parameter, all programs supporting unicode will not be affected, but this setting allows programs no unicode you run too, all in one language at a time.

• Windows Vista Ultimate Edition will be not updated from Windows Update

  Why these updates does not apply to Windows Vista Ultimate Edition?

  KO 2378111

  967723 KB

  KO 2345886

  KO 2443685

  KO 970430

  972145 KB

  Here's an overview:

  http://jumbofiles.com/016cdbch2nb7/updateservice.PNG.html

  In addition, why Vista Ultimate load individually all these individual language packs? The other 32 options. How can I disable them?

  Q: is this computer belong to you or...?
  A: my client

  It is a specific consumer support forum. You will find appropriate assistance in what IT Pro forum-online http://social.technet.microsoft.com/Forums/en/itprovistasecurity/threads

• Microsoft Arc Touch mouse Bluetooth works is not on my notebook of notes Windows 7 Ultimate edition and windows desktop 8!

  Hello world

  I just bought Microsoft Arc Touch Mouse Bluetooth to use it on my laptop Vaio PC Windows 7 Ultimate. My PC mouse detected and installed in the PC devices and printers folder. But that's all. Regardless of what I do on the mouse not recognized by PC (no cursor movement!). There are a number of support in the manual, but they say different division of Microsoft is nothing to do with the mouse! There is a web page address in the manual to download the drivers, but there are no drivers provided on this page. I tested on my office windows 8.1 also but get the same result!

  I buy an incompatible mouse to my PC? No where on the box of the product or in the manual of any mention of any specific PC it is exclusively designed for!

  Can we thru' shed some light on this? so that I can return it to the store if necessary?

  Thanks in advance.

  Hello

  Thanks for posting your query in Microsoft Community.

  From the description, I understand that the Microsoft Arc Touch Bluetooth mouse does not work on windows and Windows 7 Ultimate notebook office 8.1.

  Let me tell you that Microsoft Arc Touch Bluetooth Mouse is compatible with these operating systems: Windows, Windows 8, Windows RT 8.1 and Windows RT 8.1
  So it does not work with windows 7. As the problem persists even after logging in to windows 8.1, the equipment may be defective. I suggest you contact Microsoft support hardware for more help.

  In the meantime, you can try the following methods and check.

  Method 1: Install the implementation for the Arc Touch Bluetooth mouse.
  Please see the link below:
  http://www.Microsoft.com/hardware/en-us/d/arc-touch-Bluetooth-mouse

  Method 2: Troubleshooting of hardware and devices
  The hardware and devices troubleshooter can detect and correct errors and incorrect settings in devices. You can view these steps to run this utility for troubleshooting:
  (a) press the Windows key + X, select Control Panel
  (b) change the display option in the top right large icons
  (c) click on troubleshooting and click the view all option on the left panel
  (d) run the hardware and devices troubleshooter.

  Method 3:
  You can see the article mentioned below if the problem persists.
  Troubleshooting: mouse
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/mouse/wireless-Bluetooth

  You can read the articles for more information.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device #section_3

  If the problem persists, contact Microsoft Support Hardware.
  http://www.Microsoft.com/hardware/en-us/support
   
   
  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• Blue Screen Driver IRQL blue screen of death Windows 7 Ultimate edition and Windows Vista

  original title: BSOD Driver IRQL blue screen of death Windows 7 ultimate and Windows Vista

  I get the BSOD, and they are different every time.

  I had originally Windows Vista on my pc (HP m8300f) and it worked fine for 3 years until last month, I started to have these BSOD.

  So I thought a new clean install of Windows 7 Ultimate would solve the problem. Well, I was very happy to get the new operating system installed, but a few hours later that darn BSOD appeared and im now distraught.

  What is my RAM? My drivers? My hard drives?

  Computer IM but I'm certainly some type of technology. I have basic computer knowledge and that's all.

  You can download minidump files and find the information system here in this zip file http://www.sendspace.com/file/mfx420

  This issue is very very irritating and has ruined a lot of my work.

  Well up to now (18 hours) my computer has not had the BSOD and what I did is that I removed 1 GB of ram for my motherboard. Their were two sticks of 512 MB. I took them both. Now, I have 2 GB of ram running in my system and had not had a BSOD or an error after you have done this.

  What is the problem with my ram? I now have 2 sticks of RAM on my motherboard and both are 1 GB each stick. What is the mix n match that causes a problem all of a sudden? My computer came with this stock of installation. I also noticed the ram I got were the brand Samsung and the other on my motherboard are another brand.

  Well idk I hope it was my problem. We'll see.

• Windows Vista Ultimate SP2 will not install update KB2378111 or install downloaded programs and returned with error code 80070570

  Hello... my computer will not install update KB2378111 with a code error 80070570.  In addition, I can not install all programs downloaded from the internet, specifically my anti-virus software.  I'm running without any software antivirus at this time.  I ran the most recent Microsoft malicious software removal tool and it showed that there is no problem.

  I'm running without any antivirus at this time software

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Updated Windows rebooted my computer and installed the updates last night and now my login password is different and I can not connect. Help?

  I put my computer to sleep last night and when I woke up this morning it has restarted and was sitting on the login screen.  This occurs when windows update itself - and I absolutely hate it by the way.

  When I entered my password, it says that it was incorrect.  I had the same password for a long time, so the only thing I can think is that the update of windows somehow changed my password.  I have Vista Ultimate 64 b.

  I did not create a password recovery disk - how can I get my account to change my password?

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Windows 7 X 64 and now firefox update only works in SafeMode (all off also addons)

  I just updated Firefox with Windows 7 X 64 update kb2670838 number and now I just make me sent to Mozilla error report screen if I'm not in safe mode. I've disabled all my addons and themes. The only way it works (and I might post it) was to use safe mode. I don't not know the difference between safe mode and normal mode. I've updated this after noticing somethings were activated and my theme is enabled but I have disabled since their. I also use the 7 15 java update that seems to work.

  Could be this bug:

  • bug 812683 - crash to boot from Win7 to _d2d_clear_surface @ CContext::RestorePipelineStateImpl (d3d11.dll, after the installation of KB2670838)

  (please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)

• security of dec 24 2009 updated for Windows vista (kb958690) failed. and the security update for windows vista December 24 2009 (kb960225) failed, (kb9772), December 24 2009 doesn't have all three update failed. I want to know a solution to these problems

  I tried three times to updaed with no sloution. I also need updated my browsers to internet explorer 8 with space for 32 bytes. need soultion to this problem too.

  loveforsasha,
  We need more detailed information.
  What version of level pack Windows\service are you?
  What is the error code that you found these updates?
  Other updates have been installed?

  Here is some information, you can begin.
  Solve Windows Update installation issues
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.