Blue Screen Driver IRQL blue screen of death Windows 7 Ultimate edition and Windows Vista

Similar Questions

• Blue Screen of Death: Driver IRQL not less or equal (Windows Vista 32-bit)

  I tried to run the test for diagnosis of memory, not fixed.

  I tried iObit Installer and cleaned with the advanced care system, is not fixed.

  I don't have a good to restore restore point to the.

  Here's my dump files.

  https://onedrive.live.com/redir?RESID=64A50FCB734E68BB! 236 & authkey =! AC2qxvDwKWkDrW8 & ithint = file %2 c

  Andrew

  C:\windows\system32\drivers\sptd.sys associated pass through Direct host SCSI Duplex Secure Ltd.  I just want to remove this

• State of power failure - Blue Screen Of Death - Windows Vista driver

  My computer broke down 5 times, twice on 16, then once 18, 21 and now today, January 31, 2014.

  The minidump file identifies the following as the culprit in all 5 cases:
  File name: ntkrnlpa.exe

  Address of the stack: ntkrnlpa.exe + f5a98

  Address: 0 x 82438000

  Address: 0x827f1000

  Size: 0x003b9000

  Time stamp: 0x4cb715e0

  Time warp: 15/10/2010 12:38:24 AM

  Product name: Microsoft® Windows® Operating System

  File description: NT kernel & system

  File version: 6.0.6001.18538 (vistasp1_gdr.101014 - 0432)

  Company: Microsoft Corporation

  Full path: C:\Windows\system32\ntkrnlpa.exe
  Please tell us what actions I need to take to prevent or reduce this incident?
  Please note that I am not a computer scientist, but I can follow directions - I found the software Nirsoft of this forum which allowed me to access the above minidump file.
  Hoping you can help.

  Thank you!

  All attached files of the DMP are the bug check DRIVER_POWER_STATE_FAILURE (9f) .

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  If we run one! Check irp on the 4th parameter of the bug, we get the following:

  > [16, 2] 0 00000000 87976288 8243cdb4-893e5a90 success error e1 cancel pending
  \Driver\rt2870 nt! PopRequestCompletion

  ^^ rt2870 = rt2870.sys which is the Ralink 802.11 USB Wireless Adapter driver. Also used by Linksys and D-Link. Make sure that this driver is up to date:

  http://www.MediaTek.com/_en/07_downloads/01_windows.php
  http://www.linksysbycisco.com/us/en/support
  http://www.Dlink.com/support/

  Kind regards

  Patrick

• How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate? I use Windows Vista backup program (Service Pack 2),

  How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate?  I use Windows Vista backup program (Service Pack 2), and I need to do backups plus two from other computers on the same external hard drive.  To do this, I think I would need to identify each backup file separate I know which file to specify if I need to do a restore.

  How can I accomplish this? The program does not seem to give me the ability to specify a file to which to write the backup during a given session files.  In addition, I do not understand why I can not see the file name in Windows Explorer - my files options are defined to be able to view hidden and system.  Would be grateful for any help you can provide, tonight if possible.   Best regards, Oliver for Norm

  Hello

  See this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

• How can I get a driver for printer Canon I455 (my windows vista 32)

  How can I get a driver for printer Canon I455 (my windows vista 32)

  You can get this support from Canon... If they chose to take over the device in the given operating system.

  Looking at the Website of Canon's Support for this printer and select your operating system, they * sentence * support with your particular operating system.

  "This software is a module that extends the functionality of the printer driver for Canon inkjet printers. Your printer must be installed through Microsoft Update before you download and use this module. »

  So, basically install you by choosing to look on the Microsoft Update site when you try to install the driver.  It will download one Cannon gave to Microsoft after the release of Windows Vista.  Then, you restart and download the other file (on-site support) to give you more features.

• need to know which driver download for dell 1525, or windows vista basic

  need to know which driver download for dell 1525, or windows vista basic

  Dell Inspiron 1525 drivers: http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=INS_PNT_PM_1525&os=WLH&osl=en&catid=&impid=

  Choose your operating system from the drop-down list.

  J W Stuart: http://www.pagestart.com

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Blue Screen of Death: Driver IRQL not less or equal (Windows 8)

  So my computer started to plant a month ago and gives a blue screen of death. It occurred about once a day, usually by playing games. Does anyone know what I can do to fix this?

  Here are my files dmp for the last two accidents.

  https://onedrive.live.com/redir?RESID=CFF15ADE8F05C8A2%21147

  PW

  Check enabled, but don't have not 'take' GIS behave pilot.  In all cases, this accident was related to nVidia Display Driver nvlddmkm.sys.  I remove the current driver and install the latest driver available.  Yours is about a year.  You need to re - install, even if the driver is on the same date that drivers become often corrupt

• Blue Screen of Death: Driver IRQL not less or equal (Windows 7)

  Hello. I had this kind of plant several times whenever I do anything resources, such as League of Legends, Saints Row IV, ect. I'm including the DMP files https://www.dropbox.com/s/5ff62m1sjfh0ze2/New%20folder.zip?dl=0

  Thank you for the help

  Charles

  Pilot checked and associated pneteth.sys PdaNet Broadband Adapter drive from June fabrics Technology Inc..  Your 2011. I remove it and install the latest driver available.  If this is the day you should install it in compatibility mode

  To install in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > choose OS

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

  () works in win 7, 8 to win and win 10)

• Various blue screen of death windows 7, Asus laptop

  Experts/dear Microsoft community,

  Recently I had some problems with my laptop. I tried reformatting and everything but nothing seems to solve the problem long term, brief (2-3 days)

  My computer crashes (blue screen of death), whenever I play big games online. Games such as Company of Heroes, or Dota 2, etc. If I don't play these games solo (offline) I have no problems. Also all other programs work perfectly.

  I have a feeling that it has to do with my Asus laptop drivers, I tried to update, restore and re - install, but without result.

  To tell you that as the scenario for the crash: I start the game, I log on online, join a game. Then after 20 to 25 minutes of play online with no loss of FPS, it auto-shutsdown the game with absolutely no message, followed with an accident soon after, sometimes immediately.

  Here's the accident report I got the program: Whocrashed

  Look forward to hearing your suggestions.

  Concerning

  computer name: ICRASHEVERYWEEK
  Windows version: Windows 7 Service Pack 1, 6.1, build: 7601
  Windows dir: C:\Windows
  Material: N61Ja, ASUSTeK Computer Inc..
  CPU: GenuineIntel Intel (r) Core i5 CPU M 430 @ 2.27 GHz Intel586, level: 6
  4 logical processors, active mask: 15
  RAM: 4140355584 total
  VM: 2147352576, free: 1929850880

  --------------------------------------------------------------------------------
  Crash Dump Analysis
  --------------------------------------------------------------------------------

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Friday, November 7, 2014 22:01:49 this computer crashed
  crash dump file: C:\Windows\Minidump\110714-44912-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x5996A0)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80003BF56A0, 0xFFFFF880035AEE88, 0xFFFFF880035AE6E0)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Friday, November 7, 2014 22:01:49 this computer crashed
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x7E (0xFFFFFFFFC0000005, 0xFFFFF80003BF56A0, 0xFFFFF880035AEE88, 0xFFFFF880035AE6E0)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  Bug control description: this bug check indicates that a system thread threw an exception that the error handler did not.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Friday, November 7, 2014 18:29:29 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110714-17737-01.dmp
  This was probably caused by the following module: athrx.sys (athrx + 0x1C4F76)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF88005E67F76, 0xFFFFF880035A7438, 0xFFFFF880035A6C90)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\drivers\athrx.sys
  product: Atheros CB42/CB43/MB42/MB43 network card driver
  company: Atheros Communications, Inc.
  Description: Atheros Extensible wireless device driver
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athrx.sys (pilot device wireless Atheros Extensible, Atheros Communications, Inc.).
  Google search: Atheros Communications, Inc. SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M

  Friday, November 7, 2014 18:27:43 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110714-14570-01.dmp
  This was probably caused by the following module: atikmdag.sys (atikmdag + 0x1421E5)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF88005B4A1E5, 0xFFFFF88003E795E0, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\drivers\atikmdag.sys
  product: ATI Radeon Family
  company: ATI Technologies Inc.
  Description: ATI Radeon driver in Kernel Mode
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
  Google search: ATI Technologies Inc. SYSTEM_SERVICE_EXCEPTION

  Friday, November 7, 2014 6:26:57 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110714-15194-01.dmp
  This was probably caused by the following module: atikmdag.sys (0xFFFFF88005B20B5B)
  Verification of error code: 0 x 50 (0x0, 0xFFFFF88005B20B5B, 0xFFFFF8A0024CF000, 0x0)
  Error: PAGE_FAULT_IN_NONPAGED_AREA
  file path: C:\Windows\system32\drivers\atikmdag.sys
  product: ATI Radeon Family
  company: ATI Technologies Inc.
  Description: ATI Radeon driver in Kernel Mode
  Bug control description: This indicates that invalid system memory was referenced.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
  Google search: ATI Technologies Inc. PAGE_FAULT_IN_NONPAGED_AREA

  Friday, November 7, 2014 17:57:41 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\110714-49280-01.dmp
  This was probably caused by the following module: atikmdag.sys (atikmdag + 0x899D90)
  Bugcheck code: 0xBE (0x12F9A6860, 0xFFFFF880035BC560, 0xFFFFF880062ACD90, 0xE)
  Error: ATTEMPTED_WRITE_TO_READONLY_MEMORY
  file path: C:\Windows\system32\drivers\atikmdag.sys
  product: ATI Radeon Family
  company: ATI Technologies Inc.
  Description: ATI Radeon driver in Kernel Mode
  Bug control description: sounds if a driver attempts to write to a memory segment read-only.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
  Google search: ATI Technologies Inc. ATTEMPTED_WRITE_TO_READONLY_MEMORY

  Friday, November 7, 2014 17:55:49 this computer crashed
  crash dump file: C:\Windows\Minidump\110714-16692-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8000395AA49, 0xFFFFF8800AB310C0, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, November 1, 2014 8:24:12 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110114-17550-01.dmp
  This was probably caused by the following module: rdyboost.sys (rdyboost + 0x2C476)
  Bug check code: 0x1000007E (0x0, 0xFFFFF880035248B8, 0xFFFFFFFFC0000005, 0xFFFFF88003524110)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\drivers\rdyboost.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: driver for ReadyBoost
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Saturday, November 1, 2014 8:22:52 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\110114-18142-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B90)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, October 15, 2014 9:09:56 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\101514-50856-01.dmp
  This was probably caused by the following module: athrx.sys (athrx + 0xF9D77)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF880051BED77, 0xFFFFF880033A7708, 0xFFFFF880033A6F60)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\drivers\athrx.sys
  product: Atheros CB42/CB43/MB42/MB43 network card driver
  company: Atheros Communications, Inc.
  Description: Atheros Extensible wireless device driver
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athrx.sys (pilot device wireless Atheros Extensible, Atheros Communications, Inc.).
  Google search: Atheros Communications, Inc. SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M

  --------------------------------------------------------------------------------
  Conclusion
  --------------------------------------------------------------------------------

  13 dumps were found and analysed. Only 10 are included in this report. 2 third party drivers have been identified to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

  athrx.sys (Atheros Extensible, Atheros Communications, Inc. wireless device driver.)
  atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.)

  If no updates for these drivers is available, try searching with Google on the names of these drivers in combination errors that have been reported for these drivers and include the brand name and model of your computer as well in the query. This often gives interesting results of the discussions of the users who have similar problems.

  Read the WARNINGS GENERAL topic for troubleshooting failures of the system for more information.

  Note that it is not always possible to say with certainty whether a reported driver is in fact responsible for crash your system or cause is in another module. However, it is suggested that you look for updates for the products that these drivers belong to and regularly visit Windows Update or activate the automatic updates for Windows. In case a piece of defective material is originally wrong, a Google search on the errors of control of bug with the name of the model and brand of your computer can help you to deepen this review.

  Analysis of Dump 1Crash
  --------------------------------------------------------------------------------

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Monday, October 13, 2014 5:41:45 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\101314-17004-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B90)
  Verification of error code: 0 x 17 (0x0, 0x0, 0x0 0 x 0)
  Error: CID_HANDLE_DELETION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug control appears very rarely.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 13, 2014 5:41:45 PM GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheck + 0x0)
  Verification of error code: 0 x 17 (0x0, 0x0, 0x0 0 x 0)
  Error: CID_HANDLE_DELETION
  Bug control description: this bug control appears very rarely.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 13, 2014 12:15:52 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\101314-17784-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x2EDF95)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80003145F95, 0xFFFFF88004650448, 0xFFFFF8800464FCA0)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 13, 2014 11:09:34 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\101314-14320-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0xA (28, 0 x 2, 0 x 0 x 0, 0xFFFFF80002F21D80)
  Error: IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 13, 2014 2:53:45 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\101314-46987-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x3B (0xC0000005, 0x0, 0x0, 0xFFFFF88002DA2910)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Sunday, September 28, 2014 17:57:12 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\092814-16926-01.dmp
  This was probably caused by the following module: dxgmms1.sys (dxgmms1 + 0xC0A1)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\drivers\dxgmms1.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: DirectX Graphics MMS
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.
  Google search: Microsoft Corporation KMODE_EXCEPTION_NOT_HANDLED

  Monday, September 22, 2014 6:50:05 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092214-42525-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFF780C0000000, 0x1DEE, 0 x 5003, 0x420700003BD8)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  --------------------------------------------------------------------------------
  Conclusion
  --------------------------------------------------------------------------------

  7 dumps were found and analysed. A third-party driver has been designated to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

  dxgmms1.sys (DirectX Graphics MMS, Microsoft Corporation)

  If no updates for these drivers is available, try searching with Google on the names of these drivers in combination errors that have been reported for these drivers and include the brand name and model of your computer as well in the query. This often gives interesting results of the discussions of the users who have similar problems.

  Read the WARNINGS GENERAL topic for troubleshooting failures of the system for more information.

  Note that it is not always possible to say with certainty whether a reported driver is in fact responsible for crash your system or cause is in another module. However, it is suggested that you look for updates for the products that these drivers belong to and regularly visit Windows Update or activate the automatic updates for Windows. In case a piece of defective material is originally wrong, a Google search on the errors of control of bug with the name of the model and brand of your computer can help you to deepen this review.

  PC! PK

  These two were related to the material.  Specifically of the RAM.  Please run memtest

  

• How to adjust the screen resolution in Windows Vista?

  Today my laptop Dell inspiron1525 changed a screen resolution of plurrie without changing.  How can I make running Windows Vista to x 800?

  Thanks for help.

  Hi Klair,

  I suggest to access the link below and follow the steps described in the article and change the resolution on your laptop.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  If you can not change the resolution by following the steps described in the article, you can try to download the latest drivers from Dell Web site for your graphics card and install and then try to change the resolution. Access the link below and download the graphic drivers for your graphics card and try to install it.

  http://support.dell.com/support/downloads/driverslist.aspx?os=WLH&catid=6&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=INS_PNT_PM_1525&hidos=WLH&hidlang=en&TabIndex=&scanSupported=True&scanConsent=False

  Also, you can follow the steps in the link below to update the drivers to display on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I turn off the screen saver in Windows Vista?

  How, under Vista, disable my screensaver?  I'm trying to update my tomtom gps device and the screen saver must be disabled for me to receive a long download!    How can I disable the screensaver on Vista?

  Hello

  Please contact the Microsoft Community.

  I wish that refer you to this article-

  http://Windows.Microsoft.com/en-us/Windows/turn-screen-saver-on-off#1TC=Windows-Vista

  Let us know if you have problems with Windows in the future.

• How to move from the position of the START button on the screen of my Windows vista?

  I wonder why the START button of my windows vista changes its position on the screen of my laptop. I tried to search the solution by right-clicking the windows logo ang then go to properties and proceed to the taskbar button. From there I could not fined option on how to change the position of my taskbar, usually on the lower part of the horizontal of the monitor. Now, he has moved from the left upright. I need to restore the parameters passed. Please help me.

  Hello

  read this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

• Driver IRQL not less or equal (Windows 7)

  Help! I have problems with my computer turn off without apparent reason. I get the error Driver IRQL not less or equivalent. I have a Sony laptop computer VAIO VPC-CW2MGX/B. here are also the minidump files... Thank you very much for the help!

  DL

  These were related to your device driver wireless Extensible athrx.sys age of 5 year of Atheros Communications, Inc.  I remove the current driver and install the latest driver available.

  

• How to use a flash drive for HP Pavilion p6331 with Windows Vista for backup worki?

  Hello

  While I have a master's degree, my know-how is written the text, does not not with the computer functions that are new to me.  Whenever I try to my backup job, the default setting of my Media Smart desktop assumes that my files will be sent to some separate, newly purchased drive, drive E.  However, I don't have any drive E!  I bought some DVDs but they keep rejected and cannot be written above.  Seems cheaper solution was to buy a flash drive.  I tried to save, but the menu showed that drive new E or "insert DVD."  What I need to know where/how is insert (front of the back of the Tower?) flash player and the "selection" of this option.  Do I need to buy a special cable to connect this small Lexar Flash drive, 16 GB?

  Thanks for all the words of wisdom.

  Hello leathergirl. I checked the model number on the HP website and did not find a system with this model you listed.

  You can see the card reader in the E: drive when you try to back up your data.

  You should be able to navigate to any location (by car) which is able to accept data during backups. I don't recommend that you use the backup but just Windows copy and paste all data, such as documents, pictures, music, etc..

  Unless you use DVD +/-RW disc, the DVD disc can have that data written (burned) to them once. DVD +/-RW can be rewritten several times before becoming defective.

  The Lexar 16 GB Flash drive USB should be inserted into the USB port on the front and then recognized by the operating system and drivers must be installed by the operating system.

  You should be able to copy and paste your data to the Lexar FlashDrive using Windows Explorer. Lexar Flash drive must be placed in the list of drives on the left side of the screen when using Windows Explorer.