Windows 7 Ultimate, Dreamweaver CS4, error message 148: 3

Similar Questions

• Windows 7 Ultimate core 41 error message/absence of download INet.framework 4

  Windows 7 ultimate core 41 error message/when my computer shuts down now after the error message will not appear my startup journal (black intro screen) and pressing F1 or F8 to enter is prevented. I had my tech look at the computer, and he said it's very good. I bought and built my computer to write the music and it's a nightmare w/all the fracas. I even went to fix and debug kernel41 for Dummies and has not worked. I downloaded. NET.framework4 and it would not install, and still less the debugging tool which he rejected. I am computer savvy, but I'm certainly not a tech and a lot of this is incomprehensible. Cannot not Microsoft we repay or even come w/a fix? I spent a lot of money on windows 7 ultimate and it is absolutely ridiculous. If anyone can lend an ear or provide a plausible solution, I would be really grateful.

  Hi Levicka,

  The kernel power event 41 ID error occurs when the computer is off or it restarts unexpectedly. Starting a computer that is running Windows, a check is made to determine if the computer has been properly closed. If the computer was not closed properly, a kernel Power event 41 message is generated.

  A 41 event is used to signal that something unexpected has happened that prevent Windows to close properly. There may not be enough information to define explicitly what happened. To determine what can happen and to identify a possible resolution, it is important to know what made the computer at the right time before the event occurred.

  Click on the link below and see if it works.

  http://support.Microsoft.com/kb/2028504

  Good day!

  Answer please if you face concerns.

• Does not load my Dreamweaver CS4 - error code 148: 3

  No idea how to fix?   Has just begun.  Never had a problem with it before.

  I ended up reinsalling my DreamWeaver and that fixed it.

• When I tried to open Photoshop cs4, error message 148: 3 lights. I cannot open photoshop cs4

  What can I do

  Hello

  I'm sorry that you are experiencing problems opening Photoshop. There is a help page special just for this mistake here. In addition, there is an old net where a user has found licensing repair tool (located here) to solve this problem. Give it a try! I hope this helps.

• I can't open CS4 on my computer, I get error message 148: 3

  I can't open CS4 on my computer at home, I get error message 148: 3. Anyone know what this means?

  No, but the recovery of license fix worked.

• When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

  Original title: could not start the Service "Windows Defender" (WINDEFEND)

  When you try to install Windows Defender, I get an error message that

  "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

  How can I check which privileges I have and I need?

  I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

  Help please

  Hello

  This error message is because you have Norton installed on the computer. See the for more information section below.
  http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

  Let's try the steps and check them off below if it helps.

  Step 1: You can try to uninstall Norton and then check if the problem persists.
  Note: Reinstall Norton after verification.
  Reference: http://support.microsoft.com/kb/307895

  Step 2: Change the registry value and check.

  a. Click Start, type regedit.exe and press ENTER.
  b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
  c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
  d. enter 0, under value data, and click on the OK button.
  e. close the registry editor.
  f. restart the computer.

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Why Windows XP Professional give me error messages 'Bad Image'? With reference to dll32.exe files.

  Why Windows XP Professional give me error messages 'Bad Image'?

  With reference to dll32.exe files.
  \Windows\system32\MSACM32.dll is not a valid system image. Please check this against your installation diskette.
  Other messages relate to the specific 32dll.exe of the application
  It seems to me that the msacm32.dll talk of restore point for system restore.
  Thank you
  Greg

  Hello

  1. What is the number of brand and model of the computer?

  2. you remember recent changes made on the computer before the sissue?

  3. What is the service pack installed?

  4. do you have the Windows XP disc?

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

• When I try to turn on "Windows Defender" I get an error message "ox800106ba".

  Original title: error 0x800106ba.

  When I try to turn on "Windows Defender" I get an error message "ox800106ba".
  How can I activate the Windows Defender?

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• When booting Vista, is c:\windows\system32\AUDIOSES. DLL error message

  Hi people, I also did a windows update and now this error message, "" c:\windows\system32\AUDIOSES. "» DLL', but it seems I lost my mouse driver too. When starting, I get the popup that is repeated with this message, and I continue to hit the back button to get to the home computer screen. I then connect my mobile internet (via USB) but I can't switch to the window to start a connection in order to try the suggested fixes. So I turned off the computer. When I turn it back on, the first screen I get is OS (?) asking me to start windows normally, or manually, I confirm and start getting the same error again. Any advice would be appreciated humbly.

  PS I have Vista.

  Hello

  · What is the brand and model of the computer?

  · Will there be any changes made on the computer before the show?

  I suggest you to perform file system check on the computer. You can visit the link below for the procedure: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

• Windows Defender gives me the error message: 0x800106ba

  When I try to open Windows defender, I get an error message, Windows defender encountered an error: 0x800106ba a problem caused this program to stop the service, I have several questions and you want to open Defender to find out if I have a virus, I have kaspersky antivirus and Microsoft Security databases both on my computer, can you give me some suggestions?

  Hello

  only use Kaspersky or MSE, not both

  two installed anti-virus can cause accidents and problems with the system

  Uninstall one of them

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  ___________________________________________________________

  This program allows to search for malicious programs:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Windows 7 opens with the error message

  Whenever I start my computer windows 7 I get an error message, C:\Program Files (x86)\SearchExtentions\Client.Exe not found.

  I can close the box and the computer works fine, otherwise what is the error message? And how to fix it?

  Take a look at this thread on the community.

• My Acer Aspire One with Microsoft Office Windows 7 gives gives thefollowing error message "Microsoft Office Word has stopped working".

  My Acer Aspire One with Microsoft Office Windows 7 gimme gimme thefollowing error message "Microsoft Office Word has stopped working" is followed by "Windows is checking for a solution to the problem," then to "Windows try to recoverthe information" sometimes, he is able to recover and sometimes not. This can happen several times within 5-10 min.

  I'm almost illiterate with these things.

  Any help

  Thank you

  Original title: error message

  Go to programs-> Microsoft Office-> Office-> Office Diagnostics Tools.

  To test your installation

  You can also control panel-> programs and features. Select Microsoft Office in the list and select Edit in the upper part. The second Dialogue should offer the repair option.

• Message from Windows 7 Ultimate and 0xC004C003 error

  I have a HP desktop computer and it was running windows 7 Home. I decided to update the memory and install windows 7 Ultimate and since my computer is having a lot of trouble to work again. I can't install the program to run different devices such as printers or run a virus program that I own that were installed before the upgrade. I get the error message: - 0xC004C003 with a description - the activation server determined the specified product key has been blocked. I don't know what that means. Can someone help or if you have an idea why this happens. I own all the programs

  Computer is a HP Pavilion p6731a with 16 G of RAM desktop computer

  ignore the error messages, it should always copy and paste

• CS4 Extended won't open - shows just error message 148: 3

  I used CS4 for many years without problems and even last week.  Today, I tried to open it and received an error message stand alone suggesting I have contact the Adobe Support and quote error 148: 3.  I have a full screenshot (in format PDF or DOC that I can't do JPG) referring to the issuance license.  I checked online and as my record data of the product (Photoshop CS4 Extended) in January 2010 (17th).  I also have the receipt and the key Code.

  The support group sent me on the forums, which means that the message should be re-written to point people in the right direction.

  I need to solve this problem quickly.  Why my CS4 will not open when he made last week. ??

  Error 148: 3 https://forums.adobe.com/thread/375447

• Try to start Windows Defender and get the error message 0 X 800705464

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Windows

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I don't think this is the correct error code - check again.

  What security software you have on your system (it - name and version)?  Some disable Windows Defender in installation intentionally to avoid any conflict, so you won't have a problem, but simply a case of using a product that disable Defender (and Defender must remain disabled in this case as long as the other program is installed).

  Here's a troubleshooting article on how to fix Defender in Vista Ultimate: http://support.microsoft.com/kb/555962.

  To repair the Defender:
  Start - Control Panel - programs & features - Windows Defender - click on "Click here for support information" and choose repair.

  Update (update) Defender:
  Start - Control Panel - programs & features - Windows Defender - change - update.

  If the above does not work, try Windows Defender discussion groups: http://www.microsoft.com/athome/security/spyware/software/newsgroups/default.mspx.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.