Windows 7 will this program work? No luck with Vista.

CREATED ON 16/04/03 SOURCE DISK

 

Requirements for NetWorth Interactive:

Release version 1:9 / 24/96

Disk space: 9 MB

Processor: 486-75 or faster

Memory: 16 MB RAM

Sound card: Sound Blaster Compatible

Animation support: Video for Windows

Windows: 3.1 or Win95

Link to see the graphics and simulation game instructions
http://www.Scribd.com/doc/19448487/stockbroker-101-discussion-simulation-course

Hello NetworthInteractive
    
Please write to the Microsoft Forums.

To help you better, please answer this question.
1. what program are you trying to run?
Please check the compatibility of the program in the link below:
http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx
If it is not compatible, then run the program in XP compatibility mode and check

Here are the steps
1. Please log on as an administrator.
2. right click on the program and then click Properties.
3. click on compatibility. This tab appears only if compatibility mode interface has been properly enabled on the computer.
4. Click to select the run Mode of compatibility check box to enable support of the compatibility mode for the program.
5. click on the mode of compatibility XP in the drop-down list.
6. click OK to save the changes.
7. double-click on the program to run the program.

Third warning:
Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

It may be useful
Thank you and best regards,
Support Microsoft-dieng
Visit our Microsoft answers feedback Forum and let us know what you think
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

Tags: Windows

Similar Questions

  • When you try to use Windows DVD Maker, get the message that Windows has closed this program

    Installed a new software for video (because the creation of windows dvd won't work) and before its opening, it says windows has closed this program... solutions.  And nothing!  It does this too often with internet explore.  Help!  Do I have to change some parameters of security or something?

    * original title - Windows maintains close everything I try to guess

    Hi twilight,

    ·         Do you have what video creation software installed?

    ·         How long have you been experiencing this problem?

    ·         Have you done other recent changes on the computer?

    ·         What is the exact error message/code?

    ·         The problem occurs with the entire application?

    I suggest you try the steps mentioned below and check if it helps.

    Step 1: Start the computer in safe mode and check if the problem persists.

    If the problem persists in safe mode run clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode

    Step 2: No detection system file checker (SFC).

    http://support.Microsoft.com/kb/929833

    Step 3: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  • When I try to access the Bluetooth program, receive error message: "Windows has stopped this program due to a Code 43 error.

    Original title: Code43 error (built-in) Bluetooth

    I have a new laptop (vaio) when I try to access the Bluetooth program I received information that Windows has stopped this program error Code 43

    that I understand not as a problem to update. I am running Windows7 Home Premium SP1. All solutions? (outside the deactivation, which I did. I realized the usual remedies IE. checked for driver updates, uninstalled and restarted without result

    Hi DerekWilliams,

    What is the brand and model of your system?

    You can try the following steps and check if it helps:

    Method 1:

    Try to run the corner hardware store and check the issue.

    Convenience hardware store

    For more information, see the article:

    Code 43: Windows has stopped this device because it has reported problems

    Method 2:

    You can refer to the computer or the device manufacturer's Web site and try to install the latest version of the Bluetooth drivers:

    For more information, see the articles:

    Updated a hardware driver that is not working properly

    Update drivers: recommended links

  • This program is not compatible with windows 8

    I work with window 8 and I have a program to connect to my network three, I get a message saying that this program is not compatible with windows 8. How can I work around this problem.thankyou.

    Hello Russell,

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    You receive no error code when you say, "this program is not compatible with windows 8?

    Thank you for details on the issue.

    This problem can occur if the program is not compatible with the latest version of Windows installed on the computer.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Program compatibility issues and audit. Please follow these steps:

    a. press Windows + C keys and click on Search.
    b. type Troubleshooting in the search box, and then click Troubleshooting in the search results.
    c. click on "display all" and then click "program compatibility issues.
    d. click on 'Next' and follow the on-screen instructions.

    If this does not help, use method 2.

    Method 2:
    Use the steps described in this article, then try to install the program in compatibility mode with Windows 8
    Reference:
    Make the programs more compatible with this version of Windows
    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • iTunes is message to help protect your computer, Windows has closed this program with DEP.

    whenever I installed iTunes it gives me message "to help protect your computer, windows has closed this program" I did chang the Change data execution prevention settings. but after I closed the DEP screen it gives me the message "iTunes meet a problem and needs to close" I uninstall this appilication repeatedly and again I didn't solve the problem

    Ask the question in a forum of iTunes:

    https://discussions.Apple.com/community/iTunes?CategoryID=149

  • Need help! Just got a message window on startup, which reads "path of data execution: to help protect your computer, Windows has closed this program: name: request for logon Userinit, Publisher: Microsoft.» Can anyone help?

    I just got an error message at startup, which reads: execution of data path: to protect your computer, Windows has closed this program: name: request for logon Userinit, Publisher: Microsoft.  My pc is under Windows XP SP2. I think that different multiple verisons of software "virus protection" began to appear in the Explorer. I know that they do not belong on my computer. I tried to close them, but they just kept moving forward. I'm trying to find some help to solve the problem. Moreover, when I close the window of Data Execution Prevention error message, I have my bottom, no other other icons for one of my programs are on the screen. Help... This can be corrected?

    Thanks in advance.

    Carter2009,
    If you started having 'Magical' Antivirus programs to appear on your system that you do not install, then you are infected.  Some people may be painful to remove, to others not so much.  I recommend http://www.malwarebytes.org/ for malware protection and http://www.microsoft.com/Security_Essentials/ for antivirus.

    But now you're in a bit of a place.  I download Malware Bytes and put it on a USB key.  Then see if you can boot in safe mode and run MalwareBytes.  If you're not in safe mode, take a look at this: http://support.microsoft.com/kb/318027

    Hope these helps. QQ learn manage!

  • If iI better my window 7 window 8, will this affect my Windows 7 product key and how?

    If I upgrade windows 7 to windows 8, will this affect my product key of windows 7 and how?

    If I upgrade windows 7 to windows 8, will this affect my product key of windows 7 and how?

    you get a new product key for Windows 8, if something goes wrong and you need to go back to windows 7, as long as you have the product key for windows 7, you should be fine.

    If can not install windows 8 it will return you to Windows 7 with the windows product key 7

    Robin

  • Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup

    Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup.

    Backup not working in all of these songs/albums that appear also in personal playlists. Does not account for all of the media/music in Windows Media Player. It is also not known where there are additional tracks from the same album, appearing in a personal reading list, these additional tracks (that is, it will take 2 album, but ignore the other 10). Has only begun to occur in 2-3 weeks.

    Previously, when I set up the sync partnership, there are options in playlists 'Sync' discovers the device Set Up, such as 'All music' 'All images' "5 * appreciation of music" etc. None of them showing now also available. Offered only my personal Playlists. All solutions?

    Hi Phil,

    Thanks for posting your question in the Microsoft Community forum. I understand that you can't auto sync in Windows Media Player. I'll help you with this problem.

    Before troubleshooting, provide us with information.

    1. don't you make changes to the computer before this problem?

    2. have you updated to Service Pack 2 installed?

    3. don't you make changes to the computer before this problem?

    This problem may occur if there is an inconsistency in the system files related to Windows Media Player. Follow these methods:

    Method 1.

    Solve problems in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-problems-in-windows-media-player

    Method 2.

    Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

    Method 3.

    You can try to disable and enable the Media Player Control Panel.

    Steps to disable Media Player.

    (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    (b) to develop media features and uncheck the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

    Steps to activate the Media Player.

    (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    (b) to develop media features and check the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

    Method 4.

    You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Security Scanner warning: there will be a loss of data through an analysis using the Microsoft safety scanner to remove any viruses found.

    Additional information.

    Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows-vista/Set-up-a-device-to-sync-in-Windows-Media-Player

    Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/windows-media-player-sync-frequently-asked-questions

    If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

  • XPS 1530 internal mic not working not not with Vista

    XPS 1530 internal mic not working not not with Vista

    Hello ThomasBarnette,

    Thanks for choosing Windows and thank you for providing an opportunity to help you.

    According to the description provided, it seems that you are having problems with the internal mic.  As I understand the internal microphone does not work.

    Download and install the drivers for the Chipset from the link below and check.

    http://www.Dell.com/support/drivers/us/en/04/product/XPS-M1530

    Answer to us if you are having problems with the internal MIC or any other issue of Windows, and I'd be happy to help you.

    Good day!

    Hope this information helps.

  • Windows Update will not start work until I run the update utility.

    Original title: Windows 8 - Windows Update

    I have a desktop with Windows 8.  Pre-installed - computer is 1 year.

    Whenever I run my Windows Update to download/install updates - it always shows as downloads but it comes in fact does nothing and just "of the acts' as is the download but nothing happens.  Then I run the windows update convenience store (in Control Panel) and he told me that the problem is "fixed".  So I run windows update again and it works.

    But the next time it's the same thing as above - doesn't work - run the troubleshooter, and then it works.  I need to run the troubleshooter and to resolve the problem, almost everytime before the windows update will work.

    How can I get a permanent fix?

    Hello

    I suggest you follow the steps in the link below. Chose Windows 8 option from the menu drop down to follow the correct steps.

    Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

    http://support.Microsoft.com/kb/947821/en-us

  • Why my Fire Fox so plant them? I use this program, what is happening with so many accidents back to back

    Good evening
    This program crashes at least three times a day. I do not understand why this is happening, I took my computer the Geek Squad and Staples and they both told me this is the soft ware, (Fire Fox) not my computer, I keep it updated, I also host viruses check on my entire system. I have Windows

    When Firefox crashes, it records various technical reference information. If you open this page (type or paste this into the address bar and press enter) you can click on some recent crash IDs and see if data have been sent to the server so that volunteers can review.

    about:crashes
    

    Please paste some of the recent accident IDs into a response.

  • Cannot install windows 8 on Pavilion Elite M9600T (KX745AV-ABA) with Vista 64 BIT

    I can't install windows 8 on my computer. I contacted Microsoft and he has worked for three hours and said I had a problem of graphics card driver. I use a Nvidia GeForce 9800GT, which came with the computer.  When I try to upgrade to the latest driver (306.97) located on the Microsoft Update site and also on the Nvidia site, the screen says no signal and falls asleep. I worked with a rep from Nvidia for a week now and he says this isn't their driver that is causing the problem and I have to contact HP. I don't know what else to do. I deleted the working driver Nvidia (SP41066) also and tried to install windows 8 and received the same message "Windows installation was not successful" and me back to Vista 64-bit. I don't know what else to do. Can someone please, or am I just out of luck. Thank you

    Gene

    I changed the graphics card to a GeForce GT 630 and that solved the problem. Thanks for your help

    This could be closed on 23/04/2014

  • Audio & CD/DVD drive not working only not with Vista

    I have a laptop HP V6500 Pressario, with Vista Home Basic installed recently. I have two problems with my laptop:

    1 > there is no sound, and I see the error "no audio device is installed" with a red cross on the "speaker" icon.
    2 > drive CD/DVD is not visible in 'my computer '.

    These two problems are persistent, but begin to work from time to time, say once 20 times when I turn on the laptop, I see the CD drive and also audio works, but these work only for about 10 minutes...

    I tried the Dr.Fixit and it did not help and have also installed the latest drivers for my notebook to the hp site:
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3550002

    Any help to solve these problems is much appreciated... Thanks in advance

    Hey riri,.
     
    Try these steps and check the result.
    Step 1: Delete the invalid registry keys
    1. Click Start, type regedit and press to enter. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
    2. in the navigation pane, find and then click the following registry subkey:
    Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    3. in the right pane, click UpperFilters.
    Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 6.
    4. in the Edit menu, click on delete.
    5. When you are prompted to confirm the deletion, click Yes.
    6. in the right pane, click LowerFilters.
    Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further.
    7. on the Edit menu, click on delete.
    8. When you are prompted to confirm the deletion, click Yes.
    9. exit the registry editor.
    10. restart the computer.
     
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: see How to back up and restore the registry in Windows
    Step 2: Uninstall any software CD/DVD burning.
    1. Click Start, type appwiz.cpl and press to enter.
    2. from the list of programs, select CD/DVD burning software and click on uninstall.
    3. once the uninstall, restart the computer.
     
    Step 3: Install device drivers in a new user account.
    1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
    2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. click on create a new account.

    4. type the name you want to assign to the user account, click an account type, and then click on create an account.
     
    I hope this helps.
     
    Kind regards
    Syed - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.
  • Age of Mythology Gold Edition works only not with Vista 64

    Ok. Same computer. Different operating systems it works very well. It is a problem of Vista 64. When I start Age of Mythology or Age of Mythology Titans he keeps asking the number of CD 1. This version came on a DVD. Even if the DVD is in the DVD player I am always asked the same question. What is going on? How should I do? Oh! The other operating system, I've tried is 32-bit Windows XP. Yes it is a 64-bit computer.

    For those who are interested,
    I tried all the proposals by Gloria. No worked. There is no update I can find on the Microsoft Web site. So! If you want to use your Windows XP games, you need to do. It is still possible to run the 32-bit of Windows XP on a 64 bit system. I created a system boot duel using Vista 64-bit and 32-bit of Windows XP. The system is set to boot Vista normally. You can select Windows XP 32 bit on startup when you want your 32-bit games. I was forced to do it with my MSTS as well. I have a control RailDriver. There can be no drivers 64 bit at the time of writing.
    The foregoing is shared so that others can benefit form, what has been done. By the way. Not all 32-bit games need this treatment.

  • With Windows XP SP2, when 1996 install Greetings Workshop, I get an evil with the database error. This program works on any system there including other XP systems. So what's so weird on this one office computer?

    Has anyone seen this before problen? Thank you.

    Set memory size to 786 mb or less, 787 MB or superior does not. You can find more information here:- http://bit.ly/biEeTv

    Try setting virtual memory to 786 mb or less.

    Windows XP

    1. Click Start, right-click my computer, and then click Properties.
    2. In the System Properties dialog box, click the Advanced tab.
    3. In the results pane, click settings.
    4. In the Performance Options dialog box, click the Advanced tab.
    5. In the virtual memory section, click change.
    6. Change the initial size value and the value of the maximum size to a value above, click onthe valueand then click OK.
    7. Click OK to close the Performance Options dialog box, and then click OK to close theSystem Properties dialog box.

Maybe you are looking for

  • Laptop Hp 650 929 MB of usable Ram 4 GB

    Hey, I have a few questions... If you can help me or guide me pls answer. I just bought a new laptop Hp 650 Intel® Pentium® Processor B960 (2 MB Cache, 2.20 GHz), and 2 GB of ram. I added 2 more but I have this problem with 929 MB usable 4 GB... I ha

  • ENABLE SNMP POWERCONNECT 5524

    Hello, I have a problem on one of my Dell PowerConnect 5524 switches . I do not turn on SNMP. All my other switches work well except this one . I looked extensively without results SW-STUDIOshow snmp SNMP is disabled. Community community-access view

  • Office Maxtor storage device suddenly stopped working.

    Original title: Office Maxtor storage device My Maxtor storage device suddenly stopped working?  Any help please.

  • I can not install the software on the second PC

    I have a subscription to the CC license, but when I try to install the program on a second computer, Adob offers me to buy again, why?

  • Download Java from Sun Directory Server 5.2 x 86

    I'll try to find a copy of the x 86 Server version Sun Java Directory compressed archive for Solaris.  I am trying to build a test system for some old software, and I have only a copy of the Sparc ldap version.  I tried to use the current version of